We Bought the Cheapest 10HP Diesel on Temu and Put it On a Go Kart (it Rips!!)

Рет қаралды 615,324

22 күн бұрын

Go to partners.connecteam.com/carsa... to make the most of your business today! Brought to you by Connecteam.
Go Power Sports parts used in today's video:
Bolt together go kart: bit.ly/3W15tZm
1" bore clutch: bit.ly/3XX7CI3
New Go or Blow merch!
Tee: cars-cameras.com/products/go-...
Sticker: cars-cameras.com/products/go-...
Tank top: cars-cameras.com/products/go-...
Use code "carsandcameras" at checkout at langmuirsystems.com for $100 off your crossfire pro plasma table!
Thanks for Watching!
Facebook: goo.gl/VR6mh2
Instagram: goo.gl/PqOIo3
Go Power Sports: bit.ly/3QKyODE
Get $100 off any Langmuir Systems Crossfire CNC plasma table using this link, or use code CARSANDCAMERAS at checkout: store.langmuirsystems.com/disc...
Join the CarsandCameras Pit Crew: / @carsandcameras
Subscribe to our PODCAST channel: / @atthewheelwithcarsand...
NEW MERCH: www.cars-cameras.com/
Equipment we use: www.amazon.com/shop/carsandca...
The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result. CARS AND CAMERAS, the persons shown in this video and ANY CONTRIBUTOR, ARE NOT LIABLE FOR ANY such injury or damage. ALL CARSANDCAMERAS CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.
Cars and Cameras makes no representation about the sufficiency of any safety precautions and equipment used in this video.

Пікірлер: 1 800

@CarsandCameras 20 күн бұрын

Go to partners.connecteam.com/carsandcameras to make the most of your business today! Brought to you by Connecteam.

@RockenTravis 20 күн бұрын

Now to get a cheap temu turbo for ir

@dbomber69 20 күн бұрын

It needs bigger rear tires. Diesel has the torque needed to rotate a larger wheel.

@axialpad99 20 күн бұрын

@@dbomber69 Agreed, they could get more speed out of that thing for sure

@jasonkaelin2337 20 күн бұрын

Sorry if I missed some episodes but what happened to Charles??

@bodine2537 20 күн бұрын

@@jasonkaelin2337he’s still there every once in a while but not every episode anymore right now, think he had to move back closer to his parents for a new job an it’s too far to drive back an make episodes every week , haven’t seen him in bout a month or so though as of right now but he left the every week show about 6 months ago

@jde88de 20 күн бұрын

The reason it finally ran is because you cracked the line open, its extremely hard for single cylinder diesel engines to bleed themselves.

@dozer8065 20 күн бұрын

agreed, and maybe the fuel that was in it was a type of "shipping" super low quality just used to lubricate for shipping purposes, draining the fuel, changing fuel, and popping that line got all the good fuel in and bled the system.

@StroDshiesty1 20 күн бұрын

@@dozer8065exactly i feel like it was oil to keep it from rusting during storage/shipping

@cs-gj3yf 20 күн бұрын

@@StroDshiesty1 theres nothing to rust, especially the injection pump parts its all extremely high grade stainless, almost indestructible, its just lube for the tight tolerance stuff, keep in mind the plungers inside that pump have tolerances that are less than a thousanths of a inch

@masjuggalo 20 күн бұрын

But I assume they mostly bleed like old mechanical injected truck diesels (pickup trucks) like when someone runs their 12 valve out of fuel just there's only one cylinder so there's no hope of one of six getting some fuel and making the engine spin over on its own

@masjuggalo 20 күн бұрын

@@dozer8065to be fair, diesel fuel is probably the lowest quality stuff you really can get for an engine designed to run on peanut oil

@livelaughlovelife1830 20 күн бұрын

Lol it needs a little tractor exhaust flapper

@ghomerhust 20 күн бұрын

THIS

@IndianaDipper194 19 күн бұрын

PLEASEEE 🤣🤣

@christianfolkner 19 күн бұрын

like the first one!

@qoph1988 18 күн бұрын

Incredibly important. I wish I had a diesel dirt bike with the exhaust flapper thingy

@wewya. 17 күн бұрын

or make a mock big rig exhaust

@polishcynic 16 күн бұрын

The moment you put a turbo to this gokart its gonna be everyones east european dream gokart, just imagine "The TDI Gokart" lmao. 😂🙌

@WyFoster 16 күн бұрын

It's going to happen. Parts are on the way

@Basedforlyfe 11 күн бұрын

😂

@felikswielkopolan4001 3 күн бұрын

prawda!

@singlecproductions9653 19 күн бұрын

Ive had 4 of those. Remove some of the shims between the little injection pump and the block. It'll give it a few more hp and more smoke.

@Failure_Is_An_Option 15 күн бұрын

For zero benefit.

@proxyhx2075 15 күн бұрын

@@Failure_Is_An_Option Are you literate?

@davidanderson7720 12 күн бұрын

@@Failure_Is_An_Optiondiesels work different than gas engines. More fuel=more power😂

@juliogonzo2718 12 күн бұрын

@@proxyhx2075it'll blow up if you mess with the timing too much, and definitely will shorten it's life running it advanced more than stock

@killzone9810 11 күн бұрын

Are you stupid?!@@Failure_Is_An_Option

@johnathantaylor2059 20 күн бұрын

“This thing is junk…..HEY WE HAVEN’T EVEN HEARD IT START YET…….Exactly” 😂😂❤ love you guys

@twocvbloke 19 күн бұрын

When it comes to diesel engines, it ain't the horses, it's the torque that sends it, even with that swiss cheese flywheel... :P

@grannysgushinggash 16 күн бұрын

yes there's no horses in a diesel engine it contains pistons

@jacobkennedy6820 13 күн бұрын

@@grannysgushinggash i dont think you could even fit an entire horse in an engine.

@sabero5668 13 күн бұрын

@@jacobkennedy6820 Then you don't have a big enough engine. Or a small enough horse I guess

@bustinnucks1299 11 күн бұрын

Torque In motion is horsepower. What your feeling is horsepower being made sooner.

@grannysgushinggash 10 күн бұрын

@@jacobkennedy6820 you can if you mince it first

@jasonbirch1182 20 күн бұрын

Also, dont piss all your money away on brake clean. Buy a gallon of acetone for 20$. Get a squirt bottle and blast it off with compressed air. 8-11 cans of brake clean in a gallon.

@WyFoster 19 күн бұрын

And it's the same stuff lol

@michaelince910 2 күн бұрын

Thanks for the information!

@sagenbabin8786 19 күн бұрын

Bruh that got me so good I was like holy moly she booking it then at the bottom of the screen “She made me play the footage back at 2x speed to make it look fast”. Yall are so cute it warms my heart

@f-the-wef 20 күн бұрын

Diagnosing a brand new engine like they found it in a junk yard is hilarious

@bradkenyon1643 20 күн бұрын

True but that's temu. Could be wish😢

@bradkenyon1643 20 күн бұрын

Is wish still a thing?

@tommylucatiel7911 20 күн бұрын

They are the same thing @@bradkenyon1643

@crunchyfrog555 18 күн бұрын

Sign of Chinese cha bu duo construction. Sadly very typical.

@Halfstep2024 18 күн бұрын

One man’s communist utopia is another man’s junkyard I guess 😂

@WyFoster 20 күн бұрын

Love how my starter box can start a 420cc diesel but struggles with a small block Tillotson methanol engine 😂

@z1berzerker 20 күн бұрын

Its fighting the spark advance, not the compression 🤔😉... Tilly Meth builds are Bad A55 🎉🎉

@RobertJeffersonBased 20 күн бұрын

@@z1berzerker Electronic ignition would be a great upgrades for a lot of minibikes

@justinarseneau4450 20 күн бұрын

Whats the difference ? Arent they already electric ignition?@@RobertJeffersonBased

@marzsit9833 20 күн бұрын

@@justinarseneau4450 the difference is that spark timing on a small engine with a magneto is fixed, with no advance or retard possible while the engine is running. a battery powered coil ignition system can have adjustable advance, just like car engines have.

@justinarseneau4450 20 күн бұрын

@@marzsit9833 oh ok thanks for the info

@user-pf6sn8rd2l 18 күн бұрын

Diesels are all about the torque. The weight holds you into the curve, and the torque pulls you out. I concur; probably not a great track machine, but perfect for that Grand Prix woods course!

@Creed9230 20 күн бұрын

No one talking about how the Diesel engine sounds like a lions roar when he lets off the gas at 1:10:48 Love the sound lol

@jdogdiesel7242 20 күн бұрын

Now, For Some Free Mods!!! - advance injector timing a few degrees by removing 1 or 2 shims under the unit pump , turn fuel up also easy since its just an adjustment no parts swap, an ditch that stock air filter for somthing bigger and more free flowing that I'm sure you have layin around the shop, Then Bam MOARRRR POWAHH!!! And yes Turbo would be a good addition , makes it easier since that engine has a pressurized oiling system too

@DarkAttack14 18 күн бұрын

Turning up fuel without adding air is a bad plan... EGTs up for minimal power increase. Advancing the timing would be a good plan though.. He already has smoke so more fuel is not going to do much

@servicetrucker5564 17 күн бұрын

@@DarkAttack14 High EGTs on a NA diesel aren’t a problem. The old trucks with 200 hp had flames coming out the stacks and manifolds glowing

@TestECull 16 күн бұрын

@@DarkAttack14 Being able to easily turn up the fuel like that is going to be the difference between the turbo simply cleaning the exhaust up and the turbo actually making the engine more powerful. If they want any gains from the turbo they need to be able to turn the fuel up. As long as they don't mess with the governed speed setting it should wake up pretty good with some boost.

@zocka64 16 күн бұрын

@@DarkAttack14 On an NA diesel its tested to get more Power at Rich Mixture(even under Lambda 1/aka really smokey), since you are air limited, EGTs also arent a Problem und NA conditions. Adding air through a turbo would be the best addition for the extra fuel tho

@Failure_Is_An_Option 15 күн бұрын

Timing advance may be of a very slight advantage. Increased fuel... pissin in the wind. Air filter... pissin in the wind.

@ThirstyFoe00 20 күн бұрын

This build needs a custom homemade transmotion like a 3 speed trans "crawlin, crusin, racin". Yall could do it for sure 😂🤟

@zAvAvAz 13 күн бұрын

Yeah imagine an even gear spread for 90 mph!

@sabero5668 13 күн бұрын

@@zAvAvAz With a turbo, more fuel and proper gearing for it, maybe it could get there. More importantly, would you want to ride that cart at 90mph? Answering "yes" could win you the "Biggest Balls Of 2024" award.

@marco3392 5 күн бұрын

@@sabero5668more likely a Darwin award lmao

@sawyerbennett8227 20 күн бұрын

I was cracking up at around 1:12:30. John looked like he was on another planet or something 🤣

@EdGunge 19 күн бұрын

Can’t believe you got the original Goose from top gun to help out

@MultiKelly85 20 күн бұрын

Your girl did awesome! Re watch the video and watch how she relaxed her brake foot. She had it flat out on the gas pedal. Glad to see you two enjoy go karts. Next she has to help build her own.

@geetar82 20 күн бұрын

Yall need to have a hot lap day where you re-run all the board leaders!! That would be an awesome episode!!! Cheers guys and love the vids!!!

@ROFLCOPTERS92 19 күн бұрын

I have this same engine I cobbled on to an ariens 28 inch snow blower frame. The power output is super good. I've put it in to foot deep wet heavy slush and it loved it. It was barely even taking a load and it was LAUNCHING that stuff.

@RueKake 16 күн бұрын

Temu.. Giving the Chinese continuous American comedy since 2022

@extremecheddarswityomom 20 күн бұрын

She dont need to be shy, we are here to support and enjoy go carts, mini bikes etc. Its issac we're here to judge and talk about... Them sideburnz... Lol Love em. 😄

@user-bb5lm8sg8w 8 күн бұрын

And let not get started on his poocha shell necklace,

@drgti16v 20 күн бұрын

John going to his roots with the music during the painting montage.

@johnnagel9907 20 күн бұрын

If I was building a diesel kart I would definitely go with a torque converter. Keeping the rpms in the peak power curve. I'd probably gear on the high side so when the converter went to full lock up my final drive would be set for top end. I'd want the engine to top out at the end of the longest straight away.

@ryaninwa5375 20 күн бұрын

This was such an enjoyable episode to watch. It had everything in it. Some build, some fix, some vlog, redheads, and you had fun most of the time 😅

@keystoneangler3217 20 күн бұрын

Lol. I have that same motor on a mini bike. With 40 converter. I call it the D-69 cat lol. It's all done up to look like a cat machine.

@bicbuilds 20 күн бұрын

i need to see this

@humpday2267 20 күн бұрын

We wanna see this sounds like a cool build man

@lensrc7460 20 күн бұрын

Ya'll need a set of holes on that bench to bolt down engines. Tapped so no reaching your hand under the table.

@drinkmorecocacola 20 күн бұрын

A “universal” plate to mount on would be a cool upgrade to the shop. I LOVE upgrade videos

@dickkallerhan2412 18 күн бұрын

one would be a start 😆

@alexmikhael5061 17 күн бұрын

I was thinkin a c clamp kinda thing with X pattern for the 4 bolts, and the clamp fastns down on the ''table'' or into a vise even but ''designed'' to set into the jig table thingie and watnot ;)

@freedomisntfree_44 17 күн бұрын

Good idea 🤙

@EdGunge 19 күн бұрын

These long form videos are impeccable 👌 I love having you dude on in my workshop. Great job on the diesel boys!

@ExtraFungus 20 күн бұрын

Pin this please! Blue locktite comes in a tube/glue stick/paste. If you have any little ones, glove them up and have them apply it to all the bolts in the kit. If you don't have little ones, the paste still makes it easy and less messy. I haven't built one of these carts but harbor freight trailers are built with nuts and bolts, that's exactly what I did with my son, we poured outs all the hardware, put blue locktite on it and sorted them, it was a great first step in the project and it's a good first "wrenching" project with my son.

@ClintonRyanThompson 20 күн бұрын

So happy to see home much you guys have grown the channel over the years!! Keep up the great work!

@CarsandCameras 20 күн бұрын

Now this is a sweet platform!

@Jockymcbock 20 күн бұрын

Was just looking at some diesel engines! Excited!

@mathieulachance151 20 күн бұрын

Absolutely!!

@mathieulachance151 20 күн бұрын

It reminds me of the small diesel powered go kart you guys built a while ago with the engine from EBay !! Loved that video

@DuDieselDude 20 күн бұрын

@@mathieulachance151lol they said that in the video

@wyattflanders8459 20 күн бұрын

Now it’s time to super or turbo charge it

@richardsteele6776 19 күн бұрын

The mix of colors reminds me of the Partridge Family bus from the 70s. Need a flipper on the exhaust pipe. John it was nice of you to introduce your girlfriend. You two make a great couple.

@Alkatross 15 күн бұрын

Ah, you fell for the ol' flywheel scam. Happens to the best of us.

@derbydriver7431 20 күн бұрын

I almost feel like I'm watching an episode of Diesel Creek....lol

@aronfaine9457 17 күн бұрын

Matt would be stoked to see this lmao

@bigbird6788 20 күн бұрын

Love the long form videos! We asked, you delivered thanks from all of us detail orientated fans

@goosenotmaverick1156 19 күн бұрын

I have a hard time finding enough time to sit down and watch an entire movie though. Personally I liked the 30 ish minute range, longer than 15-20, but not nearing feature film length

@patrickbennett9120 19 күн бұрын

I was a TIG welder for 3 years... it is so much better than MIG... it just takes some reps to learn how much heat to use and building muscle memory with adding the rod... and you can weld any material with TIG. I was primarily an aluminum welder and TIG is the way to go... anyway enjoy... in a few months you will have the hang of it.

@waxore1142 20 күн бұрын

diesel has a forever shelf life

@juliogonzo2718 12 күн бұрын

They've mandated summer fuel where I am to be B5 biodiesel now. It's more prone to bacterial growth imo. My old job had a truck sit for about a year and the fuel went bad. Another truck sat for 3 years and it didn't because it was before they put that crap in the fuel.

@waxore1142 11 күн бұрын

@@juliogonzo2718 you can drain it and run it through a hard filter and remove just about anything

@DeltaOGaming 11 күн бұрын

@@juliogonzo2718biodiesel is sh**

@T3NNESSEE 20 күн бұрын

Id say going 1-2 teeth bigger on the clutch would improve the top speed by a lot. 1 tooth on the clutch makes up for 8 teeth on the rear. A Turbo and a good porting job would improve the hp and torque by alot.

@aidanlyons1155 20 күн бұрын

how many teeth on that clutch sprocket, did you manage to see by chance?

@T3NNESSEE 20 күн бұрын

@@aidanlyons1155 Just taking a guess id say 14-15 if its a 1 inch shaft engine.

@therealracer135 18 күн бұрын

I mean, they did say it's already sketchy enough in the corners, adding speed probably isn't going to help much, at least not on their track.

@lifehealth489 16 күн бұрын

@@aidanlyons1155 bobby dont miss anything

@jvsyoutube3298 20 күн бұрын

yeah, good to get a tig! you guys need one, and when you are good at it you can take the tig home and do welding at the tv room table. So much less dramatic with splatter and stuff then a mig!

@bvick420 20 күн бұрын

the small hex plug on the bottom right of the side cover is an oil feed. the exhaust flange is close enough to a predator 420 that an off the shelf flange fits. i turboed mine with a vz21.

@K-Rivs 15 күн бұрын

Where'd you buy the motor from?

@wilmesz1992 20 күн бұрын

You guys will love the arccaptain welder. I've been running mine since the beginning of the year on aluminum, SS, steel, and bronze filler and it is a very capable machine! Hint, you guys really need to get the foot pedal, the control it gives you makes the difference between mediocre and great looking welds especially on thin material!

@MikeSmith-bb5ii 20 күн бұрын

Worst tig weld is the one you didnt try. I was blessed to have my entire apprenticeship in tig doing stainless food and beverage equipment 29 years ago. MIG = Monkey Ignorant Gun. Any monkey can do it, and some do it well, but tig is an art.

@bigpipol 19 күн бұрын

amen ma man

@derrickmanning2597 16 күн бұрын

Over here in UK us stick welders call migs hot glue guns! I've done thin sheet and even motorcycle headers with stick,done heavy work too (RSJ'S)and cast iron! most of that is an art as well!

@nihildegrasse1700 20 күн бұрын

Uh, did they know about depressure knob?(the little red knob thingy, top of the cylinder head, beside the injector. No wonder the starter are just shredded to pieces 😂😂😂

@lensrc7460 19 күн бұрын

yes, they knew about it

@nihildegrasse1700 19 күн бұрын

@@lensrc7460 I think they should use the knob to disable the compression, thus make it easier to gain more rotation momentum. After enough momentum gained, just let go of the knob and the engine will do the rest. That's how we start some Chinese diesel engine here. Those Chinese really go low with that starter tho.

@lensrc7460 19 күн бұрын

@@nihildegrasse1700 They were. Watch again. They even talked about it.

@GuitarRek_Films 19 күн бұрын

@@nihildegrasse1700they did the starter was just that shitty that it still broke

@koaasst 7 күн бұрын

tell ya what, this was in my feed, and it was right up my alley. great content, great shop, great personalities. makes me wish i had friends lol! well ones that were into this kinda fun. see ya on future videos ill be watching.

@crossrain1188 18 күн бұрын

You guys have so many shifter Karts and go karts I would love to be in the same place as you guys in a few years from now. Also this video gives me old cars and cameras vibes I love it ♥. Keep it up

@WyFoster 20 күн бұрын

Rolling coal patrol!! 🔥 💨

@bentleeohlsen4542 20 күн бұрын

i would love to see you put a turbo or even a supercharger on this machine

@michaelbenoit248 18 күн бұрын

Y’all should get a flywheel from an L100 Yanmar because they are the same exact engine.

@locutz 17 күн бұрын

Ive never watched an hr long youtube video beforee this was quite entertaining,learned alot too .

@ur_quainmaster7901 20 күн бұрын

Before things get crazy with mods, I'd love to see a little torch shooting propane into the intake via "nitrous" button.

@WyFoster 20 күн бұрын

You're speaking my language brother

@lamarzimmermanmennonitefar5269 20 күн бұрын

That would actually help.

@gorillaau 20 күн бұрын

@@lamarzimmermanmennonitefar5269It's not goimg to hurt anything of value.

@cs-gj3yf 20 күн бұрын

nobody uses propane for a reason, nitrous is better.

@jasonbirch1182 20 күн бұрын

@@cs-gj3yfwrong. Nitrous is extra air, propane is fuel. A diesel makes power with timed fuel injection and the correct amount of air. If it's making black smoke then you need more are, if it's not you need more fuel. Adding nitrous to a diesel making no black smoke is going to get you little/nothing. Adding propane is untimed fuel for when you can't get any more from the injection pump. It helps spool the turbo earlier too. I have a propane Injection system I built on my diesel Mercedes I tow with.

@cayminlast 20 күн бұрын

Once you git the hang of it, TIG Welding is awesome, I actually prefer TIG over MIG for certain jobs where the join will be visible.

@tihzho 18 күн бұрын

I didn't know Will Ferrell built go-carts! Go Ricky Bobby! "If you're not first you're last"!

@mrthomas7511 16 күн бұрын

What a neat episode! I'm so glad I clicked on it. I really dig that paint idea

@unidude-lx3kp 20 күн бұрын

I apsolutly died of laughter when I saw the comment about doubling her playback speed

@paulforrester4057 20 күн бұрын

Loads of torque I bet

@xxbambamxx7261 14 күн бұрын

I've heard some of these engines have sat in a dirt turner for over 6 years, with little to non maintenance at all, still starts and runs like a champ

@bryduhbikeguy 20 күн бұрын

Fun stuff guys. Congrats to BBR for the design.

@livelaughlovelife1830 20 күн бұрын

Lol looks like the Will Smith's jacket in the Prince of Bel-Air

@Bama3728 20 күн бұрын

Or the Partridge Family bus.

@g0ldensample21 20 күн бұрын

Your buddy needs to be part of the channel. He's already super comfortable with the camera 🙂

@bicbuilds 20 күн бұрын

He has his own channel thats why hes so comfortable lol

@g0ldensample21 20 күн бұрын

@@bicbuilds 🤣👍. I did not know that. I'll have to go check him out. What's his channel name?

@jumpercabledadz 20 күн бұрын

@@g0ldensample21JumperCableDadz

@swedebug2889 19 күн бұрын

Epic paint-job on that bolt-cart! 👍👍👍

@MaLiXs88 18 күн бұрын

Diesel gate is a really good name for it 😂

@johnbchambers1442 20 күн бұрын

Ya know, your other diesel from YEARS ago came with a broken flywheel as well! Had a single fin broken off!

@ne634 20 күн бұрын

Wheres Charles? Ima ask this on every video until I get a answer.lol

@CLPRPSD 20 күн бұрын

Search “ Did Charles from Cars and cameras leave”. I believe there is a video of a podcast with announcement?

@scubasteve3293 20 күн бұрын

I'm doing the same thing. I feel like there was a fall out.

@CLPRPSD 20 күн бұрын

@@scubasteve3293 it seems that it’s time for change. Hoonigan iis now crap after it imploded due to corporate nonsense, Donut media has everyone jumping ship, Grindhard Plumbing lost a guy and now this. Change happens, sometimes it’s for the best, but not always

@scubasteve3293 20 күн бұрын

There is i just found it, I'm glad he left on a good note, I'm going to miss that guy.

@ne634 20 күн бұрын

Yep I found it.. didn't know they have a podcast

@walf8099 20 күн бұрын

Gotta love this idea brought back to the chopping block after a couple of years, it was one of my favourites from y'all.

@VinzClorthokeymasterofGozer 20 күн бұрын

This is the stuff I love. You guys, a little kart, and a handful of bad ideas.

@jamesbelcher5082 20 күн бұрын

Quit lying you didn’t pay $3500 for that motor you using

@TheCowboyfromhell87 20 күн бұрын

They said $415. What are you on about?

@shaynegadsden 19 күн бұрын

Yep 0:50 $415 so no idea where you got $3500 from

@JoshKilen 16 күн бұрын

@@shaynegadsden they are a chinese clone of a yanmar. the Yanmars are $3500

@shaynegadsden 16 күн бұрын

@@JoshKilen even if true i'll assume you are what does that have to do with anything. They know nothing about the motor explained how they picked it and what the price was so still $3500 wasn't mentioned and sounds like OP didn't pay attention and just made up their own backstory

@Sciggrumps 20 күн бұрын

Thanks guys for doing this experiment, I’ve been wanting to do something like this with a couple buddies, but from what I’ve gathered they’re better as a boat anchor than an actual useable engine

@jamesoverstreet35 16 күн бұрын

Guy's the Diesel go-cart is an Awesome build & i Look forward to you guys adding a Turbo to the build !!! I Really think it would be an Amazing project because it would open up possibilities for folks like myself as I have several diesel small engines that I have acquired from auctions & trades over the past few years !! I build go cart's, buggy's, Side by sides etc..... & have been looking for a Tried/Tested & True setup for a Turbo Diesel small engine combo that's solid & not a "Break the Bank" investment !!!!! I Simply LOVE your Videos & how you guy's are able to include all of the content that makes my builds so much Easier as well as much more inexpensive !! PLEASE keep the builds coming as I watch Every Video you guys post atleast a half dozen times per video as a reference or to introduce friends & Family to your informative & just Downright Wholesome HILLARIOUS "Spot On" Builds !!!! Love you Guy's!!

@snowcow1173 15 күн бұрын

Just wanna mention this video was so good i didnt notice it was longer than an hour. Been watching since 6 pm and now its 12 (was doing stuff in-between but never changed videos)

@VintageCR 16 күн бұрын

just to recap; diesel generator, mounted on a 'put-it-together' go-kart is awsome! and that's cutting it short still haha that thing is a monster!

@seanwhitley5602 20 күн бұрын

This is brilliant episode. Not so rushed. Arsome stuff.

@rockforehead3022 20 күн бұрын

Friends don't let friends TEMU... you're just asking for it.

@greenwizard2000 19 күн бұрын

I love TIG welding... can be so satisfying once the learning curve realy hits

@Halfstep2024 18 күн бұрын

I might buy one of the kits just to see what it looks like sanded and polished to a mirror shine. That’s all I could think about while looking at those parts 😂

@doctordanger4143 18 күн бұрын

I remember watchin' yall back when you started your channel glad to see you're doing well!

@GoPowerSports 19 күн бұрын

Love the color scheme on the Bolt Go-Kart.

@shtopfl5247 19 күн бұрын

Must have been two years since I watched the last video from you guys 😄 I’ve got a ton to watch 🙈

@Wil_Liam1 18 күн бұрын

As soon as I saw the rainbow colored go kart I though,"Ike and John are finally coming out in this episode" 😂 Never figured it was the partridge family go kart...

@DEEBIZ_ 17 күн бұрын

You’re telling me no one heard that fart at 8:58!? 😂😂😂

@onskuponsku_11eo21 18 күн бұрын

I HAVE BEEN WAITING FOR SOMEONE TO DO A VIDEO LIKE THIS

@darylSKYTZOwillis 19 күн бұрын

Tig is a lot like gas welding. I love Tig.

@rocketranger21531h 20 күн бұрын

Please do much more content with this setup. It is so awesome. ❤

@brianz367 19 күн бұрын

I love yard carts! Nice effort fellas!!🎉

@mitchellrooks9547 19 күн бұрын

That was fantastic loved it great video

@dalenmilligan2561 20 күн бұрын

I think it should be named the “Rainbolt cart”!

@99milesaway41 19 күн бұрын

Man, that thing is surprisingly rowdy, can't wait to see it tuned and turbo'd!

@whiteglory4350 20 күн бұрын

I just want to show my respekt to your nice ,honest made and "down to earth" work ! You very symphatetic guys and are doing a great job ! I really enjoy your videos ! Please excuse my bad english,- im from germany , and my 12 year old computer does not support english language support ! But please keep on making sucha great fun mechanical videos !

@chopfather2730 19 күн бұрын

Can we get a camouflage short sponsorship???

@ThrowbackRacing 13 күн бұрын

*"I SURVIVED BUILD WEEK."* haha Nice Shirt!

@nizamaamer 12 күн бұрын

Let’s all appreciate the hard work that goes into making these videos!

@harrywagner3877 13 күн бұрын

New cart, no long pants, no long sleeves, no gloves. You guys are nuts ! 😲 Nice video. The diesel gives you a ton of torque.

@bw4593 16 күн бұрын

Yeah this 100% turned out better than I thought it would based on the description and explanation lol. I love the exhaust

@dennisnorth1250 20 күн бұрын

Another great vid guys...Guess the torque of a diesel and weight over the drive wheels = Traction could be a factor...just plain ol brute force....love it

@ToolinAround 19 күн бұрын

BBR really went over the top with that kit! Impressive!! You guys are awesome for building their kit on your channel

@daytoncorl271 5 күн бұрын

Love the Harlequin VW theme, you should nickname it Diesel Gate-Kart😂

@bwood282 16 күн бұрын

I bought this same engine for my snow blower and it works really good. I dealt with some small issues finding the right belt size but once I got that dialed in it’s strong as a bull!

@JPMotorhead1993 19 күн бұрын

Awesome to see a good diesel build! I have the same engine on my heavily modified Murray red kart with a 40 series comet. It hauls ass. I’ve done some head porting with a custom intake and fuel system work. It turns north of 4k rpm. I have a Garrett gt06 turbo to go on it at some point as well. I’d love to put a lightened or billet aluminum flywheel on one of these. I think it would really improve the response.

@ni_wink84 20 күн бұрын

John and Ike got smoked by Quinn on her first lap, did you see how fast she was going compared to them?! 😂 and I thought you guys were professionals….. 😂😂