We Made a "Vintage" RFID Blocking Leather Wallet

Рет қаралды 88,086

4 жыл бұрын

► GET TOOLS & MATERIALS HERE: www.buckleguy.com/corter-leat...
► GET PATTERNS HERE: corterleather.com/collections...
We Made a "Vintage" RFID Blocking Leather Wallet
Making leather products by hand is an old world artisanal craft... but that doesn't mean you can't keep up with technology! This wallet is made with stainless steel fabric to block RFID scanners. We embedded the stainless steel mesh between layers of leather in the exterior shell and interior pocket. The nice thing about this fabric is that it provides a bit of structure, so you're able to use nice tumbled vegetable tanned leather for a classic, vintage look while secretly holds the newest wallet technology :) This wallet was completely hand made with tools from our sponsor Weaver Leather and sewn using a saddle stitch.
Happy Crafting :)

Пікірлер: 87

@greenworld212 4 жыл бұрын

Это же надо сколько труда в него вложено , а с виду такой простой. 👍 Терпения тебе мужик. У меня его не хватило))))

@glenpiro313 4 жыл бұрын

Another excellent piece!

@mohammedalbanna7889 4 жыл бұрын

It's very calming.

@bradleyjohnson452 4 жыл бұрын

I love the rustic look of that leather

@Dthangmi 4 жыл бұрын

I get many ideas from u r Vid n u r video is great to watch n no human sound🙏 from small state SIKKIM

@andrealohberg5051 4 жыл бұрын

Absolutely great! 👌👌👌👌

@Tutorial_Channel727 4 жыл бұрын

look at it mesmerizing

@noarthcreations777 4 жыл бұрын

Interesting design. I like that edger a lot haha.

@hebbefelten 4 жыл бұрын

Love your work.

@aerial_camera_video_imaging 4 жыл бұрын

Lovely

@user-rk5id5wy1q 4 жыл бұрын

私は日本の視聴者です！あなたのビデオはとても素晴らしいです！応援しています:)

@TheForeignAgent 4 жыл бұрын

Hi, an aluminium foil does also the job, I did a card case with it and no NFC signal pass through :)

@wanderinglavender9324 3 жыл бұрын

Seems like foil would make sounds when handling it, yes, no?? Or bend in wierd ways that would make the leather mess up. Let me know if not, that would be the cheaper way to go.

@WhenDoesTheVideoActuallyStart 3 жыл бұрын

@@wanderinglavender9324 I seriously doubt it will make any noise if it's well glued.

@pwman 4 жыл бұрын

Awesome!!

@RealGalaxyGamers 3 жыл бұрын

I like the sewing part 🙂

@wayned5872 4 жыл бұрын

I understand u want lightweight & flexible for rfid blocker/ Faraday cage, I'll ask you go look for copper sheeting or mesh it's out there & will give better results than S.S. mesh as far as signal interruption/ protection

@juliamason8393 4 жыл бұрын

I use RFID fabric behind card slots in the fabric wallets I make.

@marisolseco9107 4 жыл бұрын

Bellissima 😊

@anantharamba6832 4 жыл бұрын

Hi and Greetings from India, Again another awesome tutorial on a very elegant, functional, accessory, necessary these days, to ensure security. Thanks. Never ceased to be amazed at 'CORTER LEATHER" skills and sharing

@slapdash1821 3 жыл бұрын

Nice work brother

@lindaaustin-morin7781 2 жыл бұрын

Hello! Just came across this video. Would you tell us what leather you used and what thickness? It looks so soft and easy to work with. Thank you

@user-dd8ev6sr1l Ай бұрын

Very cool wallet, I'm new to leatherwork and was wondering if you ever thought of making an apron. Thank you!!!

@wanderinglavender9324 3 жыл бұрын

This is really great, Do you have a link to the stainless steel mesh that you have used for this rfid-blocking wallet????

@gregh4284 3 жыл бұрын

I have used aluminum foil, tested and works.

@mikecleeksr3269 2 жыл бұрын

👍 nice

@user-rq9pq2eo7l 4 жыл бұрын

на это можно смотреть вечно!!))

@TheLeathersmithShop 4 жыл бұрын

Are you using Vinymo Thread, or have you found a decent poly thread somewhere else? And what size? I normally use flat threads, like Tiger .8mm, but I'm loving the way your stitches look with that round thread!

@Corter 4 жыл бұрын

We use a bunch of different stuff - Tiger, Vinymo, Crimson, Maine Thread :)

@TheLeathersmithShop 4 жыл бұрын

@@Corter I was thinking of trying Maine next, lots of colors. Not sure which one is comparable so a .8mm flat thread though.

@bbrachman 4 жыл бұрын

Ah, a Faraday Cage Wallet. Neat.

@EduardoSada 4 жыл бұрын

Will you upload the pattern?

@johnbutler2231 4 жыл бұрын

What sciving knife do you use?

@thepepsiorcoke 4 жыл бұрын

Please make some small zip around wallets!!

@GoodWithHands27 4 жыл бұрын

can you use aluminium foil in place of the steel fabric?

@gregh4284 3 жыл бұрын

Yes. I found that AF blocks phone signals and library scanners both of which use RFID. I used 2 layers if foil. IDK if one layer works-havent tested 1 layer.

@sethhopkins5302 Жыл бұрын

Would adding the steel fabric to most designs work?

@donjaco4363 3 жыл бұрын

I don't see the pattern in the shop. How can I get?

@basmalaehab2854 4 жыл бұрын

Can you tell us how to make patterns without computer please?

@darrenddd 4 жыл бұрын

What glue do you use on your pieces?

@Kv-pk2st 4 жыл бұрын

I've been doing leather for years. Depends on what I'm doing, but a good contact cement like weldwood works just fine. It appears to be what is being used.

@alammir6984 4 жыл бұрын

Is this product available in your site??

@ericreeve6521 4 жыл бұрын

FYI the link to Weaver opens a blank page for me on Chrome mobile

@mirandawilliams6367 4 жыл бұрын

May I ask , Can we you use the same method with vegan leather (good vegan leather) or faux leather (but again good quality) ? Thank you 😊

@yura1717 4 жыл бұрын

Like!

@willie_mccoy 4 жыл бұрын

Does this only block vintage RFID?

@glenpiro313 4 жыл бұрын

Good Really ok that was well played

@Corter 4 жыл бұрын

yes pre-ww2 only ;)

@willie_mccoy 4 жыл бұрын

@@Corter What radio station we on? No idea, the wallet is blocking it. Wow, that thing works good.

@willie_mccoy 4 жыл бұрын

@@glenpiro313 Thanks. I'm here till Sunday. Try the prime rib!

@glenpiro313 4 жыл бұрын

Great. Now I want prime rib.

@FFdo. 4 жыл бұрын

I can't find the stainless steel fabric? anyone has seen it around ?

@TheLeathersmithShop 4 жыл бұрын

You can find it on Amazon. Just google for RFID blocking fabric.

@lagiftaatelier6881 4 жыл бұрын

beautifully! How long does it take?

@petersumpton2211 3 жыл бұрын

This Wallet is not shown in the patterns link

@thaomk85 4 жыл бұрын

I like handmade

@frankdrzewiecki865 2 жыл бұрын

How many times have u cut urself wisping away the scrap while cutting... not that I ever have just asking.

@pdwhit Жыл бұрын

Hi, I was wondering what RFID means. I haven't watched the whole video yet so you may explain there. Thanks.

@fgreen411 8 ай бұрын

Radio Frequency IDentification. The "chip" in your credit card. There are hand held devices to read the information contained on the chip. It's becoming the most common form of identity theft.

@ai5085 4 жыл бұрын

👍🏻

@charlieshin9868 4 жыл бұрын

That editing tho

@johnjarmuskiewicz5277 4 жыл бұрын

How about that pattern?????

@eugenejohnson8635 4 жыл бұрын

Have you ever made a bag just like Daniel Boone holds all his black powder bag 💼

@krncmc5085 4 жыл бұрын

Ive been trying to get a hold of you its been about 7 weeks since i ordered the belts ive already sent and email not sure if u saw it but it contains the order number

@SmashTactics 4 жыл бұрын

uh-oh

@jacksonwilliamson3647 3 жыл бұрын

Corter leather: 0:06 Me: uses plain paper instead of card stock and wrinkle and tears it instead of getting a clean cut.

@seccat 3 жыл бұрын

What happen to your BlockBusters membership card?

@terzi7074 4 жыл бұрын

they are no patterns about this and some other projects

@johnjarmuskiewicz5277 4 жыл бұрын

Still no pattern........

@shindanu 4 жыл бұрын

Guest?

@kennethnielsen3864 4 жыл бұрын

15th.

@alb673 4 жыл бұрын

You should be sponsored by BIC lighters, or at least get a free supply :)

@theestimator 4 жыл бұрын

According to Armourcard , this doesn't work , data can still be stolen , nice Wallet though

@krncmc5085 4 жыл бұрын

Hello?

@user-so8un9ej4g 4 жыл бұрын

funny has not met yet bravo give me this thing from Russian

@JamesStreetStation 4 жыл бұрын

I thought the need for RFID blocking wallets had already been debunked several times over?

@thewoo9894 3 жыл бұрын

people will always be scared.. like with vaccines and 5G towers 🤦‍♂️

@RealGalaxyGamers 3 жыл бұрын

It’s in case of fraud and it can happen but you could also just put cards on top of each other to mess the signal up

@psychalogy 3 жыл бұрын

@@RealGalaxyGamers doesn’t work, card readers can just read each different card then. Has happened here with people not taking cards out of their wallets to scan on and off busses. They found they’d been charged multiple times, once on each card they carried, for the same trip. I’d feel more comfortable with the mesh.

@manekari 4 жыл бұрын

glue-gasm.

@mikerobertson4041 2 жыл бұрын

Nice video. However, RFID blocking is really a non-issue. In the US, there has never been even one documented case of such a crime, and most credit card companies moved away from RFID technology several years ago.

@AshleyBlackwater 2 жыл бұрын

Ngl i think most people know this, but there's a market for people who do/will buy it anyway, so why not fill the demand :)

@Richard_Barnes 4 жыл бұрын

Why RFID when there is no threat there? It’s as bad as the Y2K bug we were all supposed to get hit by. Yet another money making scheme by everyone selling RFID gear. LOL. BTW, I love your gear. I still have a Shell #8 wallet from you that I got years ago. Awesome colours running through that #8 Shell. 👊🏻👍🏻😀

@jeffreymoffitt4070 3 жыл бұрын

Watch the modern rogue on stealing credit card info.

@claudiamatteolo1459 4 жыл бұрын

Pratically leather crafting is repeating the same basic operations over and over, having the proper tools. Anyway this small wallet/bag is unpratical for credit cards and you have to fold your money before to place then in (you risk to drop some as soon you grab the roll)