Your lady is very well-spoken and stunning. Lucky man.
@vigt548Ай бұрын
It is so great to see a couple that really work in harmony esp. when the are extremely knowledgeable. They are 100% positive energy.
@marcosathens814011 ай бұрын
Congratulations Liv & Danny on getting the motor rebuilt. Good for both of you. back to enjoying the ride. As us old guys say "You done did good"
@jasonbose350711 ай бұрын
Dude, why are people so hung up on changing out the Pistons, a big waste to replace all the Pistons if you don't need to. You only replace that which is broken. The YOUNG LADY IS ONE HUNDRED PERCENT CORRECT WITH GOOD COMMON SENSE!!! Thanks 👍
@newtonfirefly358411 ай бұрын
Correct Jason, but [O]Liv[ia and Danny are completely incorrect, wrong with not cleaning all of the carbon deposits off the pistons, inside the heads, valves as they did within the cylinders The carbon deposits result in detonation which results in harm. All of that effort to open the engine, disassemble, examine everything, also remove every piston, change the bearings, hone the cylinders and not clean, wife, remove the carbon deposits from the pistons, heads, valves is obvious, clear, silly, foolish nonsense !! Everyone that does a refresh as this certainly cleans and removes all carbon deposits ! They clearly need to modify the fuel mixture and perhaps the fuel. But why are obviously very ignorant and refuse to accept the proper, correct, valid knowledge which is known for over 5 to 6 decades to over 120 years. Ethanol and methanol are far better hydrocarbon fuels with hydrogen is the best. @GNARLY SPEED SHOP @GnarlySpeedShop The inline fuel filter is certainly an improvement, but a 10 num replacement filter is far better for the fuel injection system. Adding, Switching to having "Flex-Fuel" for variable and high ethanol content is far better too. However, Ignorant Fools will remain to be foolish accepting the false incorrect ideas, claims, information from those with improper, incorrect, invalid information lacking proper knowledge known form over 140 years. Blogs, certainly 'comments' along with many involved in building, racing are certainly among those with incorrect, invalid, improper, false base, basis. The actual professionals have connection with the proper knowledge. Among the best available on-line are David Vizard, Lake Speed, Jr.. much from Steve Morris, , add especially EFI University, R.E. D which are actual engineers as Lake Speed, Jr. Certainly add experts as PME, Dennis and similar professional engineering, competent, engine builders as Ed Pink. Among the most common is ignorance with, about fuels, lubrication and proper operating temperature. All The Best and Much Success in Your Quest(s), Health, Happiness and Well Being 😊, Sincerely ☺ P.S. If You will check the CA Law, ask any PD officer, Sheriff, it is required to have the CA license plates-tags with the appropriate valid sticker on the front and rear of the vehicle along with the required registration and insurance information. Danny should already know this, since he has been loving in CA all these years, as i did when living there too [1982-1993]. Personally appreciate the older blue metal painted license tags, plates. They look especially very good with this 1967 GTO too! have been thinking often, many times about the specific 417 NPR and the meaning for this vehicle. Have You figured out a meaning yet ?
@brianhoover473011 ай бұрын
I reused all my lq4 positions. Just put new rings on them and clean them up. been running my lq4 for year's now still to very day since 2017 and not one problem
@newtonfirefly358410 ай бұрын
@@robertyoung. Yes, Robert Young, ... so what is/are You actual point(s) ??!!
@optimisticpessimist48410 ай бұрын
@@newtonfirefly3584 That minimal piston carbon buildup will not be an issue at the lower compression ratio they are running with.
@newtonfirefly358410 ай бұрын
@@optimisticpessimist484 Do You have any actual chemistry, physics, engineering, engine mechanics to substantiate Your claims with accuracy ??!! NO -> Your attempted falsehood instruction failed => Good Luck, Bye Bye
@unclerobby11 ай бұрын
I had two strokes and two heart attacks restoring my Ride. I love your posts and progress ❤ Hopefully next year I can make Myrtle Beach Run. Keep up the awesome work.
@GnarlySpeedShop11 ай бұрын
You can do it!! Thank you so much for watching. ❤️
@jessesager946011 ай бұрын
I’m stoked to see you guys got it back together and cruising again! 🤘🏻
@GnarlySpeedShop11 ай бұрын
Thank you!
@cornflake7311 ай бұрын
I am so happy that your build has turned out so well for you. I too thought those lifters were noisy, glad you checked them. Sounds great.
@autobahngringo11 ай бұрын
Nice people - fun watchin you guys!
@vicferrari93805 ай бұрын
Love them old Pontiacs.
@SteveLowe6511 ай бұрын
It sounds so good! Great job you two, very happy for you!
@GnarlySpeedShop11 ай бұрын
Thanks so much!!
@titogonzalez944911 ай бұрын
IVE BEEN WAITING FOR THIS VIDEO!! So excited that the tempest is finally running
@johnjwedrall42902 ай бұрын
Olivia. You da Best 😊
@garybarry444611 ай бұрын
So happy you are going to get it done and have a test drive
@gearheadted921011 ай бұрын
very cool car,music and solid young folks,Im 61 and grew up working on and driving classic cars it was awesome!
@GnarlySpeedShop11 ай бұрын
Glad you enjoyed it
@ericclaeyborn360011 ай бұрын
What that expert says can't possibly be better than my internet comments. No way! Clean the top of those pistons! lol. Even if you don't clean off those pistons, you're still an inspiration.
@mikemullay56222 ай бұрын
Nothing more fitting than Dick Dale's beach guitar for this beach road trip.
@GoldSeals11 ай бұрын
Im just seeing this now after watching your other video.I didnt know you had it back together already..I think you made the right call not cleaning the tops of the other pistons.Some pistons have a protecive coating on them,and by using a wire brush,you might remove that coating..Im so glad everything turned out ok
@chriskayakq-ster726410 ай бұрын
I totally get it the classic hotrod thingy. Makes me miss my older cars from high school i bought cheap or people just gave me. My fav was a 64' Buick Wildcat 455 engine 4 barrel carb w/ baby blue interior marsh mellow white with all polished perfect chrome bumpers.
@rickmccurdy4932Ай бұрын
That’s my fav car too!! I had 3 67 custom tempests back in high school…my nicest 67 I kept for 10 yrs….i love your videos!!! Wish I still had my 67 post car too….
@rickmccurdy4932Ай бұрын
Wish I could send you pics of my cars…my brother & both had 67 Pontiacs I had a Tempest and he had a Lemans convertible
@nickelnoserestos259811 ай бұрын
Awesome job guys... Love that sweet Pontiac... so nice.
@tonypatrick936211 ай бұрын
Heck yeah that’s awesome glad to see you guys having fun great video thanks
@olschoolkarate111 ай бұрын
Exhaust sounds great. Clean looking install great work.
@GnarlySpeedShop11 ай бұрын
Thanks 👍
@morora.931211 ай бұрын
Very nice ! Congrats on getting in back in shape !
@jeff-el5ne2 ай бұрын
very fun video , really enjoyed watching .
@rodvaughan862811 ай бұрын
I really like the way you pot it together. Happy to see yall having fun.
@32road11 ай бұрын
Just awesome!! Great to see the smiles and Big Wave on the road! Cheers🍻🍻✌️
@mafiahenschen867411 ай бұрын
Awesome Liv,,, you keep crushing it!,,,👍👍🥃🥃
@mikemullay56222 ай бұрын
I have two classic Buicks. A '56 Special and a '65 Skylark. Both are virtually stock with some minor improvements to the brakes and suspension. I get looks everywhere I go. The classic car community is really the best. My '65 Skylark is no beauty queen but I drive the heck out of it. I love seeing that old Tempest on the highway.
@davesayers580911 ай бұрын
Outstanding AF great car and love following the build!!
@GnarlySpeedShop11 ай бұрын
Much appreciated!
@frecheewhite431Ай бұрын
Really cool and love the super cool surf music too
@garywilson1211 ай бұрын
congrats on getting BIG WAVE back on the road. love the beach tour!
@johnbehneman154611 ай бұрын
CONGRATULATIONS ON YOUR MOTOR REBUILDD!!!! SHE LOOKS AND DRIVES GREAT!!!! GREAT VIDEO. SO INSPIRATIONAL!!!! THANKS FOR SHARING!!!!
@stevesmith215511 ай бұрын
Good job, enjoy your project , live love laugh and drive your car, and l love your podcasts.😊😊
@Testing-12311 ай бұрын
Your happiness and satisfaction are well-deserved. Big-Wave is a beautiful machine!!
@davidowen88811 ай бұрын
Excellent ! I'm in Love ❤️ with the Pontiac that is 😉 ☮️
@elwoodsummersjr59611 ай бұрын
Great job, Pontiac sounds amazing, liv is as beautiful as ever, you just amaze me girl , so full of life ❤❤❤
@tonyrovito975310 ай бұрын
I have a 70 Nova and to see the work you're doing on this warms my heart. In many ways mine was a similar build!
@davidjones572911 ай бұрын
Your Pontiac sounds great! Great perseverance getting it back on the road. You're ready for Power Tour 2024!
@robostyle977311 ай бұрын
Car sounds great nice job!
@TheRealRyan6811 ай бұрын
Congrats on getting "Big Wave" back on the road! Such a great reward to accomplish that. I know that journey to get there as well. Keep up the great work! 🤙
@GnarlySpeedShop11 ай бұрын
Thank you!
@garyhodges817311 ай бұрын
Congrats! Big Wave is a great looking ride!👍🏻
@philipstephan54518 ай бұрын
Hello, yeah that one piston is going to darken up within a few miles any way. Just keep doing what you been doing. Have fun doing it, the minute you get to serious, and listen to everyone else, its not fun any more. Stay safe , blessings. Cheers. 😊
@johnreo721211 ай бұрын
Congratulations guys, outstanding effort, your excitement is infectious. The methodology you use in solving the problems you've faced, is a testament to your work ethic. Really nice shop as well.
@sammyjones350011 ай бұрын
So sweet to get the car how you want it. Well done !
@nathanlapp224411 ай бұрын
Congratulations on getting Big Wave fixed and back on the road! Your videos are so honest and this one made my day!😊
@GnarlySpeedShop11 ай бұрын
Thanks so much
@chuck561762 ай бұрын
Congratulations on a great engine build! Had a '67 Tempest, one of my favorite cars ever! Always got a lot of comments whenever I drove it! Love your channel and the surfing music! You both are a lot of fun! 😊👍🏻🏝
@phillipcortel633011 ай бұрын
Good for you Liv! The piston tops will get dirty / Carbonell up anyway.
@OdySlim11 ай бұрын
shure sounds nice! Great job.
@rodwood687111 ай бұрын
Good Job on the Tempest!...I just noticed the "OHC6" (inline6) badge on the front fender so its cool that its a 6 litre engine that you guys installed.... I come from a Pontiac family so I really enjoyed this content !....My dream car is a 67 GTO....keep up the great work.!!
@thomasalexander84202 ай бұрын
Y'all did good
@musclecarczarig400311 ай бұрын
When Ken Duttweiller talks, you listen! That man is a legend. Congrats on getting Big Wave going again!
@jacquelineg398711 ай бұрын
Happy Happy for you both! I love your channel. I have a 1977 ford van with full on rust and your channel made me appreciate the patina 😂❤ You guys rock. Great couple together much respect seen between you two❤ Get that baby tuned in before the big hills for the wave 😂
@GnarlySpeedShop11 ай бұрын
Thank you so much Jacqueline!! Appreciate you watching ❤️
@wesmattimore289511 ай бұрын
Congratulations, you guys put alot of work into it.. me and my ocd i would've cleaned the carbon off the piston tops.. congrats again
@TheHord4 ай бұрын
Really appreciate the video and sharing it with us, that's for Danny 😂. Only at 15:00 ish now, but things are looking great, can't wait to see the Pontiac back up and running for good. 🍻... Big Wave is awesome! Glad to see all is well.
@williamward770711 ай бұрын
Congratulations...you look so happy...also appropriate music for this video "The Ride Out", "My Brand New Car", "Shark Alert"...kudos for "Big Wave"
@cliffordkinnear970511 ай бұрын
Congratulations!!!! She lives!! The Tempest when new was considered a mid-size car for reals! The Bonneville was the full size coupe or 4 dr sedan. Smart decision going with the V-Band clamps, they've been used in the aerospace industry since the 1940's!! They don't leak ever!! Beautiful views from the top of the road as well as the beach-side on the PCH. Both of you did a great job on the Tempest -- well done!!!
@jimgillett11846 ай бұрын
Sweet ride girl! Seen you being interviewed by VGG and talking about your Tempest and seen this and had to check it out. Got a subscriber here as soon as I saw the fishing pole in the front when you were taking off lol. Great content Sweet Tempest enjoy!
@rdecoster111 ай бұрын
Yaa-Hoo!!!! The Tempest is a pretty neat old Hot Rod Pontiac. The underneath is the best with all the fresh Trick parts. There is no real rust problems. The interior is all cleaned up. All in all a pretty COOL car!! Now it sounds healthy and runs Great too!!!
@imhtrod209310 ай бұрын
Guys I love this channel! Immediately subscribed! Just came up on this feed and watched this episode. I had a 1967 Lemans and this was so nostalgic!
@GnarlySpeedShop10 ай бұрын
Thank you for subscribing :)
@giveblood846711 ай бұрын
sounds like this one is going to be good. Good Luck.
@chrishakomaki763310 ай бұрын
Ya do what u want 2 do. And from what I have seen u r not doing anything wrong. That's what building cars should b is having fun and learning new things.
@vrenaldo11 ай бұрын
awesome job you two!
@GnarlySpeedShop11 ай бұрын
Thank you! Cheers!
@blueovalOdell11 ай бұрын
Nice work
@stephenhodge644111 ай бұрын
I really like v band exhaust. Being able to change out things easily is very underrated.
@paulgrimm5 ай бұрын
Love your Tempest!Total Bad Ass❤.You have beautiful pistons 😂
@Novaman6611 ай бұрын
Great dedication and not getting dismayed by a few setbacks! After all Rome wasn’t built in a day! And neither are 6liter engines!😊 “ Big Wave” is big time!!!👍Congrats👏
@NetWit2011 ай бұрын
Nice running and nice looking Pontiac. That's a big job, but you proved that not giving up pays off.
@GnarlySpeedShop11 ай бұрын
Thanks 👍
@donreinholz812111 ай бұрын
It sounds pretty smooth guys!
@jeanlawson913311 ай бұрын
Awesome 😎
@maxpurdy531911 ай бұрын
Way to go kiddo you did. It looks good now I want a LS In my El Camino.
@maximuswedgie51499 ай бұрын
The car looks great Guys
@richardwoodward336311 ай бұрын
Good job
@terryeustice539911 ай бұрын
Kinda like instant replay Danny. After the lifters sound got quite. Sounds a lot better. The Tempest is alive again. Looking great. So far. Watched this car from the beginning. Big Wig is a keeper. No driving it off a cliff. Just some Patina sauce to shine up.
@chrishansley620011 ай бұрын
I’m sooo very proud of you for not getting discouraged like so many people would. You rolled up your sleeves and jumped right in. And rode that Big Wave all the way to shore. And a bid shout out to Gnarly Race Shop for always having your back. Much respect! 🎉❤❤🎉
@jimfinlaw453711 ай бұрын
Congratulations on getting Big Wave back on the road where it belongs. Theres no need to replace all the pistons with such little time on them. They should do just fine. Looking forward to seeing your adventurea in Big Wave. Again, congratulations on a job well done. 😉
@GnarlySpeedShop11 ай бұрын
Thank you!!
@markbrown623611 ай бұрын
Congratulations on the first road trip on the new engine. Have you considered some "shine juice" from Vice Grip Garage to stabilize the rust/patina?
@GnarlySpeedShop11 ай бұрын
Yes! Will be working on cosmetics next
@Dalekennth196911 ай бұрын
sounds very nice
@patrickfahring608611 ай бұрын
Surfs up dude 😮
@nm-ge4tb11 ай бұрын
👍👍✌✌🙏🙏😊😊excellent
@tinstaaflh304211 ай бұрын
You should have a 10 micron filter before the injectors. 80-100 micron is after the pump,
@enriquelicea982111 ай бұрын
Love your Car good job. I good my baby two years 1966 GTO it's have been park for 30 years And I been working on it hope to have it on the road..soon.. Its a Pontiac i think that i will cry when i get it back on the road...😢
@JT-dj9hc10 ай бұрын
Olivia I'm with you, the simplicity of a carburetor is nice and ironically a bad indicator hurt your baby. With a good old 4150 Holley that motor would still be alive and finished your trip. Blessings guys really enjoy your shop time and adventures
@fredfleming26111 ай бұрын
Love your car I have a 67 GTO that belonged to my late daughter. Mine is all stock
@bruceshook178111 ай бұрын
One of the prettiest body styles i think. Wish i still had my 67 GTO
@jeebs200210 ай бұрын
This is my favorite year for the GTO. It sounds great.
@GrandPitoVic11 ай бұрын
OMG!!! Do you know what's going to happen if you don't clean those piston tops? NOTHING!!!! LOL. Great job Liv. Just remember, 98% of the people on here that like to drop some of those awesome comments have never left their couch, much less accomplish what you have. Especially being a woman wrenching on cars. Anyone that's wrenched on cars have been clueless. EVERYONE has to learn. No matter gender. My hat is off to you. You have learned so much. Be proud of yourself.
@codywilliams10311 ай бұрын
Hide a GPS tracker in that car.
@1966gtoguy11 ай бұрын
You had one scored piston, all others were good so no need to concern yourself if they all are within spec. Don't listen to the internet experts!
@mark_osborne11 ай бұрын
The fact they didn't clean the 'tops of the piston's' means absolutely nothing because 100 miles down the road, every piston will look exactly the same. Glad you got it back together. I'll stop right there.
@samvan752711 ай бұрын
Congratulations, I'm curious as to how the injector flow test came out. Also, you should get some shine juice from Derik at vice grip garage for the beauty.
@dennyoconnor868011 ай бұрын
Never ever start a freshly assembled engine without using a preoiler to get all of the air bubbles out of the oil passages or the top end is going to run dry while the engine oil pump is trying to purge the airlocks out. Assuming you use a good assembly lube, probably no harm was dome. But listening to those hammering lifters made my teeth hurt. Anyway - nice engine.
@nordland223511 ай бұрын
My high school sweetheart had a 67 Buick Le Sabre......we cruised the tires off of it.....big back seat too.😊
@kevinkobayashi11 ай бұрын
what an amazing job on the car, got few ideas for your "next job" on the car, one get a serious paint job and last convert the back to a convertible so it can be ready again for summer trips and fun in the sun driving wind in your hair
@geebopbaluba159111 ай бұрын
That was quick. There’s a 66 GTO shell for sale that’s a original 4 speed 389 car and I looked at it but I’m just to old now to get involved in another project. I’m very happy for you getting it back on the road.
@GnarlySpeedShop11 ай бұрын
Thank you!
@Karkmotuning10 ай бұрын
What caused the piston to fail? I think we all would like to know, and maybe learn something. Hope you get many trouble free miles now that you have the Pontiac on the road again 👍
@paulkrueger112211 ай бұрын
You go girl
@nhaskett105411 ай бұрын
Livin the dream!
@jessegoldston7011 ай бұрын
Congratulations i would Use some Sweet Patina on it if you are not going to paint it
@Dalekennth196911 ай бұрын
it’s your car you do what you want ❤❤
@furyfantoo10 ай бұрын
10:34 Band clamps, like what is used on large trucks, work well for sealing when the downstream pipe is inside the upstream pipe. Muffler shops insert the TP this way but then generally weld it to make it leak-free. But you want to remove your mufflers in the future, so a band clamp is a potential solution. There are band clamps for butt-jointed pipes and for overlapping pipes - make sure to get the right type. Also, slather the OD of the tailpipe with anti-seize before you put it into the muffler to help with future disassembly.