We turned $100 into a board game table
Рет қаралды 88,724
Күн бұрынWe DIY a board game table using parts from Ikea! And other places! We buy the $100 Ingo table from Ikea, which is technically a kids table, and make a bunch of cuts to create the board game recessed arena surface that can hold Tabletop Chits and cards. We buy some particle board from Ikea, and hardware is from Ikea and Ace Hardware! This entire process took about 2.5 days to woodwork with 1.5 people, but the final product has African Mahogany rails and seats 4. Neoprene, cupholders, and other accessories could be on the way. We fit Hellapagos, Proliferation, and Ticket to Ride USA no problem, and we’re sure Catan could easily fit. However, some of the bigger games on BGG may not fit, like Gloomhaven, Twilight Imperium 4, or Star Wars Rebellion. Although this process is inexpensive, we ran into many issues along the way, so see how Pranav gets us out of the messes!
Use our code ‘SHELFSIDE’ at checkout for a free custom play surface and help the channel (worth $200): bbopokertables.idevaffiliate....
Table of Contents:
Intro - (0:00)
Ikea Shopping - (1:28)
Workshop Day 1 - (4:46)
Workshop Day 2 - (12:47)
Completed Table - (17:31)
Final Thoughts - (19:59)
Support us on Patreon:
/ shelfside
Our Website!
www.shelfside.co/
Purchase Games We’ve Reviewed! (Paid Link)
amazon.com/shop/shelfside
Shelfside Social Media:
/ shelfsideyt
/ shelfsideyt
/ shelfsideyt
/ discord
Links to our other stuff:
Ashton's Channel: / ashtonwu
Daniel's Channel: / doyduh2
Stuff Used:
Music: Happy Calm Intro 35 by TaigaSoundProd
Free download: filmmusic.io/song/9655-happy-...
Music: Lofi Hiphop Intro 35 by TaigaSoundProd
Free download: filmmusic.io/song/9551-lofi-h...
Music: Dreamy Lo Fi Flute by chilledmusic
Free download: filmmusic.io/song/10282-dream...
Music: Sneaky Snitch by Kevin MacLeod
Free download: filmmusic.io/song/4384-sneaky...
Music: Energetic & Drive Indie Rock by WinnieTheMoog
Free download: filmmusic.io/song/10443-energ...
Music: Happy Song 2 by Frank Schroeter
Free download: filmmusic.io/song/10603-happy...
Music: Positive Fat Bass Intro 03 by TaigaSoundProd
Free download: filmmusic.io/song/10906-posit...
Music: Sadness Cinematic Ambient by MusicLFiles
Free download: filmmusic.io/song/7875-sadnes...
Licensed under CC BY 4.0: filmmusic.io/standard-license
#boardgames #tabletop #diy
@benjaminrosa1418 10 ай бұрын
Love how Pranav is becoming a more regular in Shelfside. Love his energy!!!
@lester44444 10 ай бұрын
the measure once cut thrice energy is strong here 😂
@WalkOnNick 10 ай бұрын
I have zero motivation to do this myself, but this was really fun to watch.
@MunchhausenPL 10 ай бұрын
The hardest part of DIY is finding a friend with all that tools :D
@mr.hufflebottom2769 10 ай бұрын
Petitioning to have Pranav build a board gaming house in Shelfside’s next video 🔨🧱
@ashtonwu7760 10 ай бұрын
Can he please
@rightleftspin 10 ай бұрын
Oh god, don't do this to me
@theotherjosh3928 10 ай бұрын
Really appreciate how you guys keep going back to the board game table project to improve it in different ways 👍
@GarrettMiles5623 6 ай бұрын
I know you didn't use the original ledge but painters tape at the cut line where you accidentally had to much would have fixed the chipping issue when cutting with the circular saw. Great Video I watched from beginning to end.
@loves2tinker 6 ай бұрын
One of your best videos. DIY even gives me ideas about modding my current Ikea table which has 2 built in foldable leafs. Thank you.
@bandersen 10 ай бұрын
"There are solutions to this . . . I'm trying to think of them . . . " sums up every woodworking project I've ever done.
@MonarchsFactory 7 ай бұрын
Great little side adventure from you guys - loving seeing your buds included in the videos!
@Endeva09 10 ай бұрын
This channel is very quickly becoming one of my favourite board game content sources - you guys convinced me to buy Takenoko, great stuff keep it up ❤
@Shelfside 10 ай бұрын
awesome! Yeah Takenoko is a solid buy, still have it in my rotation :) -Asthon
@Endeva09 10 ай бұрын
@@Shelfside we havent played it yet, its with 2 other games on the shelf which we will endeavour to play when the time is right (for info: Splendor Duel and Terraforming Mars) - fuck, I'm at Stage 4 buy buy buy aren't I...
@Shelfside 10 ай бұрын
@@Endeva09 BUIY BUY BUY!
@DanD20 10 ай бұрын
That was great to watch!! Love how cheap it is!! I'm going to wait until v37 releases and buy from you guys for $200!! 😁 I want the adult sized table, though. So, $300.
@Endeva09 10 ай бұрын
Pranavs Protips™: "Don't drill directly into your legs."
@H2G24life 10 ай бұрын
its always easier to see how to use the materials after the DIY, but one idea, use the 20$ board you got as the topper instead, and the OG table top peice as the bottom. LOVE how it turned out!!
@Shelfside 10 ай бұрын
Haha yep! cheers! -Ashton
@jaredgillenwater4221 5 ай бұрын
"I came, I saw, I messed up." Would have been so much better if he finished it, "So now I have to saw again."
@twigglyfiggly3429 Сағат бұрын
When you charge for the labor of multiple people, probably a cost in the thousands lol
@nathanclarke6694 5 ай бұрын
Rabbit the mahogany and make the topper inset if you want it more waterproof-ish
@ptastydactyl 10 ай бұрын
Hey great job guys that looks great! I need to do that soon.
@KamiNoSabaki 5 ай бұрын
I think i'll try this too! Just thinking about leaving the gap between the armrests and the underconstruction to slide in some cup holders or stuff like that. Also i like the idea of led's as someone mentioned, 'cause everyone knows that led's make everything better :D
@EliotHochberg 5 ай бұрын
Very fun work, one recommendation that you may have thought of that I would make is on your leaves on the table top, maybe screw in some rubber feet at the corners so that it’s easier to slot perfectly over the game top and that way there’s no way that the Table top will slip when you’re having dinner, the last thing you want is for somebody to be eating and then they lean in the whole thing is pushed over onto the floor. The other thought I have is, while it looks like using the rails is working just fine, Maybe there’s some kind of a cup or dish or something else that you can get a bunch of, preferably plastic ones, and then screw in some kind of a post so that you can drop it along the rail and it will hold in place, and that way you can have a space to put your pieces where they won’t get knocked off of the rail if you aren’t paying attention.and you could probably do something similar with cupholders or whatever you wanted to do. But nice build, very fun.
@PsychicLord 10 ай бұрын
Awesome project, Brian seemed cool.
@ashtonwu7760 10 ай бұрын
Will tell him!
@BoardGameDave 10 ай бұрын
Love watching DIY board game table builds! 🪚 I've been getting more comfortable with woodworking and general DIY skills lately but I still feel like when the time comes I'd rather just splurge (nothing crazy, mind you!) on a top-tier quality table instead of trying to make one on my own... but we'll see! Love the finished product you all made! Thanks for sharing, guys! (Also, the old saying "measure twice, cut once" comes to mind as I watch this!) 🤣
@Shelfside 10 ай бұрын
measure a couple of times, cut a couple of times, see what happens :D -Ashton
@BoardGameDave 10 ай бұрын
@@Shelfside 🤣🤣🤣
@Theboardbro 10 ай бұрын
Such a great video!!
@Shelfside 10 ай бұрын
thanks jimbo!
@AnubisYB 4 ай бұрын
I happen to own this IKEA table model and this DIY is incredibly inspirational. Also quite impressive when you consider that board gaming tables are very expensive, and this one looks really amazing for just 200$. Adding cup trays and trays that could mount on some rails wouldn't add more than a 100$ to the overall cost. Great work, both table-wise and content wise.
@Shelfside 4 ай бұрын
thanks man! This video was so fun to make and I'm glad it is inspiring :D -Ashton
@raoulinho82 10 ай бұрын
What is the ideal internal dimensions needed for "larger games" really? I play a lot of Marvel United with the (in my opinion) much needed 90cm diameter round playmat. ...so would a square (or rectangular) inner surface with at least 1m w + l do? I would love the big brother IKEA version created from you guys! :)
@Jeffs40K 4 сағат бұрын
Goto a Thrift store and find a Old Table made of good Woods, if your going to sand and stain it, thats normally why they are sold, because scratched up !
@rudigerf.1111 10 ай бұрын
pretty good table
@mrcatchingup 7 күн бұрын
1-As long as the people that spent all the money/time building it are happy with it, that is what matters. 2-This looks like a crazy amount of work and frustration for only some armrests and preventing dice from falling off the table. Why not just use a dice tray instead? What good ate the arm rests, so you can lean in when obsessed? 3-It might be a goid side for board games but I much prefer to play RPGs on a table 4 feet by 5(or 6)feet. That allows a 2by3 Matt in the center and then each side of the table still has a foot for the players books/tablet/character sheet. I find buying 2 rectangular folding tables work well for such. I would caution people to get them with the folding legs NOT at the absolute ends but instead at least &6 inches from the edge, then you can get your legs under the table if you are on those ends.
@Iamwrongbut 10 ай бұрын
Why didn’t you put some felt down in the arena area?
@rioghantorrin3968 4 ай бұрын
"A game table for $100!" Then procedes to spend 100 on the table "a little bit more money for materials"
@Crits-Crafts 5 ай бұрын
Haha love that table. Ive made a couple of these game tables now
@SaschaKleiber 8 ай бұрын
I so wish I had the tools available (as well as the working space), I'd immediately do the same project (just a bit bigger)! Well done guys!
@Shelfside 8 ай бұрын
sweet, yeah this one was super fun, we'll see what Pranav's next project is :D -Ashton
@TorSverre 5 ай бұрын
Don't know about your area, but here we can borrow most tools for free at the local library. (no table saw, unfortunately, but circular saw can do the job if you just measure more than once)
@zenster1097 10 ай бұрын
Would definitely get a mat felt to complete it.
@LeMayJoseph 5 ай бұрын
Okay hear me out: You drill blind holes into the side rails, match marking the tabletop. Drill short blind holes into the tabletop, slightly smaller than the holes in the side rails, and glue dowels into these. Boom, now you've got alignment pins.
@CeeJayThe13th 4 ай бұрын
You could even just drill straight through the topper into the rails so you know the holes will line up. Then you'd just flush trim and sand. You could even leave them proud by about 1/4" and round them off and they'd just look like a little design feature.
@LeMayJoseph 4 ай бұрын
@@CeeJayThe13th now I think about it, I’d probably just do thru holes up through the rails and match mark upwards through the holes. I would prefer to keep the surface not drilled
@UlugNaar 5 ай бұрын
I made a table like this last summer. The table I got is solid wood and I got it for free. It came out great. Cost me about €100 cause I used quality paint and laquer. Gaming mat was €12 and led strips were free. My table is bigger tho. Good video.
@RandomPerson-nd2ey 10 ай бұрын
Nice! If you don't find a neoprene mat that's the right size or just don't want to use one, my daughter and I found success and fun with fabric instead. Simply wrap some batting (a fabric used for padding) followed by velour or felt (for a less luxurious but more affordable option alternative). Simply attach the fabric with spray on fabric glue, wrap around the edges, and staple from underneath. We used that method to make a topper instead and enjoyed it. Well... Until a night when I had drank a bit of umm... Water! Yeah, got to stay hydrated. Anyways, it didn't get put away properly and the cats tore it up like a scratching post. So, yeah. Make sure you make it inaccessible to animals. (Don't feel too sorry for us. We had fun building it together and my wife gave me a really nice neoprene mat as a gift for Christmas). Also, you could probably add cup holders with a hole saw and cup holder inserts. The inserts can be found online and stores that sell products for RVs, boats, and/or semis. If you already have a hole saw, that addition should only cost about $10-20 while preventing spills.
@Shelfside 10 ай бұрын
awesome, will let pranav know :) -Ashton
@benc442 3 ай бұрын
Measure a few times, cut a few times 😂
@TheGUNdalf 9 ай бұрын
Correction, war of the ring is the standard of fitting on a board game table 🙃
@libertytoad6935 4 ай бұрын
Thanks for the post--it is a shame the captions cannot be turned off.
@Shelfside 4 ай бұрын
aah, I just put some of those captions in because for some devices it might be hard to hear. Cheers! -Ashton
@InXLsisDeo 8 ай бұрын
You can buy cup holders that clamp to a normal table
@moltenbullet 6 ай бұрын
You know how some tables are like a bucket /a box on the underside? So, just flip the table over, and move the legs to where the table top would be, and BAM you have a board game table. Buy the same table again just for the top and BAM BAM you get a table topper too.
@lukefreligh531 11 күн бұрын
yall really have no idea what you're doing. that part is entertaining
@TorSverre 5 ай бұрын
So you turned $100 + another $100 or so into a board game table ...
@JackPS9 5 ай бұрын
4 people, assuming 1 behind the camera, 1 cutting the boards, and 2 others but neither of them can catch the boards on the other side to stop them from falling?
@zbow1974 Ай бұрын
why in hell did you leave a hole in the middle instead of running the strips the whole length?
@scottmcfarlane7524 10 ай бұрын
use metre less issues.
@ScytheNoire 10 ай бұрын
You'd want a miter saw to cut 45s on the arm rests. You'd want a plywood blade or other high tooth count saw for your circular saw. Also, only have 1/8" ticking through and using masking tape to prevent chipping of plywood. It's not the saws fault, it's the blade and blade depth. Instead of the metal brackets, should have just run the side through the table sides to cut the grooves for the game bottom portion. There are dual blades for tablesaws just for this, or could do a router (saw is quicker). You can get instructions online for tables, and then just modify those designs. IKEA quality is really hit or miss, and I found all their tables a bit small to do this with as I'd want 6' x 4' minimum.
@byronevans1061 8 ай бұрын
Ok I'm in love
@casteol 10 ай бұрын
What game were you guys playing the second time?
@ashtonwu7760 10 ай бұрын
Hellapagos! It’s a party game
@casteol 10 ай бұрын
@@ashtonwu7760 Ty :)
@pooby887 10 ай бұрын
Inflation is crazy that table was 50 bucks when I bought it like 4 years ago
@st0ox 6 ай бұрын
Fail until you make it. Nice table!
@stratagon 10 ай бұрын
2:35 Side pieces DO have a tendency to be problems.
@coreymack6208 10 ай бұрын
Teach me
@Mast3rShan31 5 ай бұрын
And the cost of the tools used... :D
@Shelfside 5 ай бұрын
ha. ha ha ha. sshhh -Ashton
@controlledchaos4356 3 ай бұрын
I love whaching poeple creat thing some times I wish I could just absorb their knollage
@royshark4311 4 ай бұрын
Please change your smoke alarm's battery 0:48
@Shelfside 4 ай бұрын
man, great eyes -Ashton
@jonathans.9488 5 ай бұрын
That’s some janky work lol
@WrestlingGab 3 ай бұрын
17:30
@maximemdable 3 ай бұрын
A lot more than a 100$ :/
@cghrios783 7 ай бұрын
But if you are modding it wht not making it from scratch?!
@MessiahKnight 3 ай бұрын
Catan 😂🤡
@DividedStates 5 ай бұрын
0:12 "We bought a table for 100 Dollar from IKEA, put in a little bit more money for materials"... WTF? That's Instant dislike for the dumbest fucking click bait I have seen in a while.
@nephalos666 5 ай бұрын
Yeah, pretty fucking clickbaity title that just outright lies.
@repeadit 4 ай бұрын
May u should learn some woodworking skills and stuff before do such videos and teach ppl wrong/false unprofessional stuff which isnt good, I dont mean that offensive or anything else. I'm working in a carpentry and my heart and ears bleeding :D for example the use of the saws or the drill sometimes
@thatweirdgirl8466 2 ай бұрын
“How we turned $100 into a gaming table” “we bought a $100 table plus more money for materials” so the answer is you didn’t. Clickbait 👎
@IllisiaAdams 8 ай бұрын
Hyyyy! Im sorry to be a downer, but please, please sensor your swearing. *Especially* the F-bombs. - It ruins immersion in the video - You risk losing monitisation!!! - Can be fun or funny until you just keep doing it and it loses all entertainment value - You can actually add a layer of humour and fun to vids by being creative with how you do it 😉 - A lot of people are sensitive to the F-bomb (not necessarily other, less bad swears) so you're potentially upsetting lots of viewers and even losing some :-( - loss of monitisation risk! I said it twice because it's *that* important 😜😂 Anyway, other-than-that little upset, a funformative vidyo all-around! ❤ Looking-forward to 4.0 hehe
DIY Creators
Рет қаралды 4,3 МЛН
Робзи
Рет қаралды 372 М.
ShadowPriestok - Евгений Чернявский
Рет қаралды 808 М.