Im so happy that no numpty has come across or reported these videos. Keep at it, mate. You're doing WA a favour.

Hi Jack, like you, I’ve spent many years shooting and culling in Africa. I’ve noticed from your videos a couple of pointers that could help improve your cull rate. 1) it looks like you’re too quick to move to the next target, and actually move the weapon to the next target before you have finished the one you are currently working on. You also tend to flinch when squeezing the trigger, especially on the quick shots. I had the same problem. To get around this, you must “follow through” on your shot. The best way to do this is to line up your shot, pull the trigger gently whilst keeping the cross hairs in the same place, then as you fire, FORCE yourself to WATCH through the SCOPE, where the round IMPACTS the target and try keep the cross hairs on the hit point as best you can through the recoil. This will take practice. Over time and practice it won’t effect your timing but will get to almost 99% kill rate. Yes 99 culls with 100 rounds. 2) once you master the above, normally a couple of months, you’ll move onto snap shooting. The best I can explain it is when we line up our shots and delay we tend to hesitate and cringe for the coming recoil and causing us to flinch when you expect the round to go off. This means the cross hair move all over the place as you line up a shot. If you notice, the first time your cross hairs hit the target they stay on the target for a fraction of a second whilst your brain starts to process the coming recoil. In this first fraction of a second you can get the shot off before you start thinking about it and crapping yourself for the expected recoil. Remember to force yourself to watch through your scope where the rounds hit. Practice this at the range to see what I mean. 3) I’ve culled in lots in bush similar to what you have in WA whilst in Zimbabwe, Zambia, Mozambique and Botswana and I always head for trees for cover and to rest your weapon on. Resting your weapon against the side of a tree will improve your shot placement incredibly. You should be walking tree to tree or tree to fence post, or fence post to car. Plan your stalks/approach accordingly from tree rest to shoot to tree rest to shoot. Good luck and I’ll watch your progress!!

Someone get this man a true simi auto AR 10

I’ve never unloaded a mag manually, I let the rifle do that… this is my new favourite quote.

Grew up on a farm in alberta coyotes an gophers, no camels but varmint is a varmint. Cool to see the same life but different on the otherside of the world. Keep up the hard work💪✌️

A idea from the the northwest USA hunting we use shooting sticks made from 4ft round wood dowels lashed together towards the top. Like buffalo hunters back in the day for long shot in brush. They work amazing form long shots like shooting off a bench. Their a few dollars compared to a bipod which is way more

I'm glad the wedgetail worked out.

Great review Jack !!

Excellent informative video thanks 👍

Awesome review!... best of luck !

Jack you will love the Bogpod deathgrip. I have had mine for roughly 12mths and it has made it possible to take shots I wouldn't have bee able to off hand. From most of the vids I have seen you are moving quite a lot to shoot the camels. The bogpod once you get comfortable with it will be able to be carried on the move and save you always taking a knee to finding a tree.

Good work Jack 😁😁👍👍

Great to see yours is going so well mate. Mine is waiting for me to get time to go down and pick it up. Keen to get some ferals with it.

I've got the long hand guard and switched out the moe grip for Hogue molded so much better feel to it! don't forget to grease those rollers!

Great review mate, love to have one in 308 just for pigs and wild dogs. Keep living the dream, sub'd👍

I really like that rifle. I can see a lot of uses for what I do here in the states

Good job demonstrating the MPR in a real world pest eradication situation. I run the ZT red dot offset on my MPR, it’s great, you’ll love it.

Great information thanks!👍🏽😀❤️🇺🇸

Man we need to get you guys a 2A

Great review Jack, My MPR has the 15" hand guard and yes it is great to have that room to mount some accessories. I am running the PMC ammo in mine as well ( PPU and Sierra ammo will not cycle through the MPR ) and they cycle great but like you mentioned they seem to go straight through and minimal damage if they don't hit bone, I tried ADI 135gr HP on my last trip and they were awesome the only thing is they aren't cheap. I have a Grovtec buffer tube QD sling mount and Grovtec single point sling if you are thinking of going with one it works really well if you are chasing on foot easy to disconnect and reconnect. cheers mate keep the video's coming.

A nice addon would be a Magpul MOE K2 grip. The reduced angle is really nice for the wrists. Cheap and well worth the money!

mate , from your terminology , I'm betting you spent some time in the ADF, your review is very good and concise. the PPC ammunition, I would wager the cases are over expanding in the chamber, and binding, have you tried a spray of silicon lube on the rounds , in the 60,s in Vietnam the Americans had to oil the first 5 round in the Armalites , our the weapon would jam and fail to extract. i enjoy the videos as they show an area of Australia I wont get to see, and how you manage a large cattle station.

In case you wanted to know but there's a company called Cogburn Arsenal who makes and sells an SR-25/AR-10 magazine stripper clip guide that allows you to use US surplus M14/M1A 308 5 round stripper clips to load your Magpul magazines. I don't know the legality or the availability of the M14/M1A stripper clips in Australia but it might be an option to look at. I've used the M1A stripper clips before on my M1A magazines and they work really well. Just an idea.

I PARTS OF the USA like Texas we have the same issue with feral Hogs and we're grateful, for semi and every in some cases full automatic,looks like PPU Has really sloppy tolerances or your rifle has tight tolerances 😮 PMC IS WELL KNOWN FOR THICKER BRASS

On the PPU ammo, I think I would try taking a box lay them out, lightly spray with silicone and box them back up to try. I have only used the PPU in bolt action rifles without issues. I did have issues with my semi auto 308 with soft point Winchester though.

Looking at that you could use a good cheek riser to hold your head up which will be be ificial

Good vid jack, have you measured case head expansion on the ppu, ? They may be running hot, especially with the heat out there, best rgds steve uk

You can get the vertical front grip with the Bipod built in..

Since it’s an ar platform I would highly recommend looking into some Creedmoor options like 6.5 really accurate less recoil then a 308 and dose some crazy things

Wow! 2,000$ usd scope! No wonder it’s so awesome!

Hi Jack, really liking your channel, just curious what category your rifle is? Thank you

Would have liked to see you try running a mag or two of that PPU through without firing, just to see if the rounds are trying to stick prior to fireforming. I know that doesn't change the situation for you now but, if the PPU are getting sticky prior to fireform, there may be something could be done to the case head section of the chamber to alleviate the problem. Now that I think of it, just simply polishing the 1st 6 or 8 mm of the chamber where the case head resides may be enough to get some positive results.

Great review, thanks mate. And thanks again for testing PPU ammo after the rifle has broken in. A pity about PPU, but at least now I know for certain you can't use it reliably. Cheers mate.

That is cool. Many using the new Barrett’s bxr?

Well Jack since your next video usually covers my comment on the last video I will just quit commenting. I just don’t want to waste your time and you are covering these things anyway. Almost like you’re reading my mind. I looked the MPR308 and it seems they(Wedgetail) really try to make a weapon you all can use in AUS. Curious if the PPU brass is swelling causing the jamming issues? I have seen this with a few of the different brands. I have even had it happen with the same brand just different grain bullet. I am also impressed with the amount of rounds you have put through it and the fact that the level of dirt is still limited. Great review and hopefully they don’t get these taken as well. Great stuff Jack; keep it coming my friend!

The media is there to make money 1st & the truth comes in far behind. Keep up the good work

Great work ! Didn't know you could not own a semiautomatic thats kinda sad the numbers you need to stay ahead are in need of something faster a mini gun mounted on your truck ? I have also had good things from pmc if they cleaned up the powder they would shoot cleaner

Nice review💪👍, but does putting on gloves not hinder loading/reloading , feel of the rifle??👍👍

There are three measuring tools that are required to determine whether there exist any of the "headspace" issues that everybody in the Comment Section is yelling about: a .308/7.62x51 NATO "Go" chamber headspace gage, a "No-Go" chamber gage in the same caliber, and a CARTRIDGE case gage in that same designation. The first two are used to determine whether the rifle is within SAAMI specifications, and the last one checks the cartridges in question for min/max dimensions. The bolt should lock up-ready to fire- with a "GO" gage inserted into the chamber in place of a cartridge, but it should NOT lock into battery with a "NO-GO" gage inserted. A correctly-sized cartridge inserted into a Cartridge Case Gage will protrude above the notch but below the rim of the gage,-(min/max dimesions.) Most good reloading suppliers carry them or can get them for you. I doubt that either the chamber nor any of the ammo would fail any of those dimensional tests; the problem is more likely related to the chamber pressures each respective ammo brand develops in that extreme Outback heat. Soft-ish brass may also factor in, as would a rough, dirty or scratched chamber wall.

That's interesting about PPU, because my 7600 doesn't have any issues with the 150 gn PPU, neither does the Savage 110 Tactical.

Hi Jack stumbled onto your channel, after watching your video I placed order for Wedgetail pump action rifle at fishing & outdoor world I. Darwin. Funny thing the guy was wearing your cap. Small world. I want to save up for the scope you use, are you satisfied with its performance? There not much around in reviews, Regards Peter

It sucks we can’t have this rifle in NSW it’s looks so good!!!

The head spacing or the bottom of the brass isnt thick enough on that PPU stuff soomes like. It works in my lever action rifles but im using 30-30 and not 3-0-hate in it

Would it be possible to mount an Arca Swiss or picatinni rail just in front of the magazine so you could use a tripod or any suggestion on where you could mount one

I couldn't get PPU ammo to even get a tight group at 200m through a bolt action

Hi Jack would polishing the breach help the PPU problem?.

Do you have access to Outback ammo? I remember it being marketed here in the states.

Can you turn the camera to 90 degrees so your peek will not knock and then just rotate the footage in editing? ,sorry i dont know anything about the camera, it was just a thought, i used to have a straight pull AR15 platform in .223 and loved it but i gave up shooting 6 years ago ,wish i kept it up

Jack have you changed the trigger out as it is a bit rough from standard.

3:41 I hate to be 'that guy' but isn't it LPVO, not LVPO?

Have u tried the adi ammo

It is and should be called, a farm tool🙏👍🇦🇺

Just curious, what do you do with all the deceased camels?

You probably wont like the Bog pod death grip for what you are doing. Its heavy I use one for crossbow hunting in a blind.

Time to sue the news station for copyright infringement - they would do it to you

Had one on order for long time finally got email saying there now $3800 so I got a ruger sfar ar-10 $990 with two 20 round mags instead bloody joke that much for a pump and after seeing your video they look like junk

Air rifles have come a long way. Kind of an expensive “maybe”.

Jack, what’s the weight and balance like more so when you’ve been on the move after 40-50 rounds?

can you get ballistic tip ammo for that rifle ?

if you're going to keep using the camera on the scope every time, why not just move the mount further down the rail to fix the eye relief issue? Shouldn't move your point of aim too much, re-zeroing has only been a 3 shot job for me when I've played around with my eye relief when using a solid mount like you have (when using traditional rings its been more effort)

Also - I have a BOG Deathgrip, pretty great tripod, its only weakness is the poor quality bearings and how it articulates the head (basically everything beneath the grip down the the bipod itself felt cheaply made compared to rest of it). I modified mine with some professional camera gear following this guide kzfaq.info/get/bejne/bbmUjNB5zK_dqaM.html (I didnt buy their kit, bought similar components & 3d printed a spacer) I retained the option of either using the "death grip" head for most of my rifles or attaching directly to an ARCA rail that i have on my Tikka Tac A1. Post modifications its ever so slightly lighter as a bonus.

Do you home load any ammo ?

Where is Ant? 10.25 pm Regards Ron

Are you allowed 20 shot mags or just the 10 shot ones there Jack? should be at least allowed the 20 or 30 shot mags for the pump as far as I am concerned.

You could probably polish your chamber and not have issues with the PPU

do they make then chambered in 5.56nato?

How do I buy you some ammo??????

Where is Ant , Jack

How do other Aussie KZfaqrs have semi-auto guns with suppressors?

Your not nav’s brother are you m8 from exsplore life?

Taipan ?

what length is the barrel?

Hmmm… thinking…. It would be cool to have a semi-auto that has a pump function to clear jams and stuck cases. Could save a soldier in battle.

Any chance of a camel safari for paying guests? Are you allowed to reload as it may save you money

Nanny state all over the world. Politicians are rather dim, but dangerous to us. We have a labour MP here in Uk who was photographed wearing two left shoes on her feet. How do they get to be MP's?

What is the definition of ppu and pmc please?

1.)I'm astonished,that you do not take a single blink at the jamming cartridges;They could reveal what the problem is.2.) Simplest solution would be,to try other bullet weights from PPU like the 165grs and 168grs..-I took the liberty,as to relate your problem to PPU's marketing division.They might want to contact you.-Personally I believe,that your rifles chamber ist not up to specs.One explanation could be,that the chamber is for 7.62x51 Nato and not for.308 Win.(Or vice versa)

Damn……I feel sorry for y’all. How are you able to talk with that boot on your neck 24/7?

"Is it possible to hire contractors from other states to shoot for you that have a cat-c?"

Why do we need 'the media' again? I've forgotten.

Federal and PMC Is my favorite cheap ammo for literally everything. I know that the PMC stuff doesn't cheat you out of velocity like the other stuff even the more expensive stuff ive found to be weaker. I dont like Hornady ammo for this reason. Overpriced shit that doesn't give ypu velocity that they claim and the bullet construction doesn't have good quality control. I suggest everyone to stay away from Hornady until they get their shit straight

Great job Jack. So tell us, What dumb arse WA government department do we have to potion to allow you to run a semi auto. As you said criminals don’t care about laws and it would make your very hard job just that little bit easier cheers and keep up the great work 👍🏻

It look like you’re playing an FPS game when you run up to the camels and shoot them

Is there any metal on the rifle other than the barrel?

8:32 sorry about that wish you could have a real ar-10.

Vote those people out who are restricting your rights.

Ppu sucks... The only time i use it is for so obsolete they are the only maker... And then i find Fiocchi makes it, so... no ppu.

Meanwhile in America ,i have a LWRC Repr 308 with 25 rd mags and a Vortex razor punching out to 800 yards.Amazing what your government allows you to have,a pump action AR10 ,freakin joke

I wanna ask Jack, I am a big fan but I’ve seen in a few of your videos that you have some very… special magazines. Did u just remove the spacer from them and replace the spring or did you get them imported from overseas. Anyway, if you are I would like to request for you not to show them on any videos as if a coppa who knows gun laws comes across your videos featuring these special magazines you’ll be the next headline on the nightly news about why we need to ban guns. As a fellow shooter I am just asking you not to give the media and the tyrants more ammunition to use against us gun owners of W.A.

You wouldn't by any chance take a South African as a worker?

Ever wish yall had a second amendment??

Looks like a head spacing problem

A $200 3d printer (Creality Ender 3) has completely killed gun control. Act accordingly :)

All anyone has to do is watch ur channel and see that u guys def need these at very least but 100% need semi auto. And look at all the gang shootings all around aus the last 20 years they are all done with illegal smuggled handguns there is only a handful done with a shotty or rifle aussie gun laws are great but way too strict for legit shooters.

Please define the term 'REAL WORLD' for me.

Thats bullshit bro u guys should b allowed semi autos for this kind of work u lose too much time and ur aiming position everytime u chamber a round. I always thought if u get the right licence and legit reason u can have semi's that sux balls