No video
Weld retip 3 claws on a garnet cluster ring
Рет қаралды 2,193
Күн бұрынRetipping 3 claws on a garnet cluster ring in 18ct yellow gold (strange for a garnet ring) using the Lampert PUK 3 Professional Plus welder on Gap 6ms 25% power. The garnets were not damaged by welding them but great care is needed to keep the blast of the weld far enough away from the stone to not damage them.
Filming this close up is difficult because the camera is where I normally put my left hand so please forgive any clumsiness or getting my finger in the way.
@Yubber2127 6 жыл бұрын
Do you find you have to burnish your welds so you can get rid of porosity?
@tribletman 6 жыл бұрын
Matthew Peterson I don't normally need to on retipping unless there is solder in the area making the weld porous. On most other welds, yes I have to get rid of porosity. It's a pain but I treat it as part of the process so that I'm more comfortable with doing it. I find the hammer drill works best and use the rotary porosity tool on shanks and wedding rings.
Robinson Foundry
Рет қаралды 1,1 МЛН
THE PROPOSAL
Рет қаралды 291 М.
TECH HUB
Рет қаралды 12 М.