Welding 101: How To Run A Straight Bead

Рет қаралды 7,456,041

7 жыл бұрын

Learn to run a straight bead! This is lesson one in welding. We're using the Everlast PowerTIG 200DV for this...
Ready to join the WELDing community? Download the app in the Google or Apple stores or Log in online at www.weld.com today! Find welding resources and exclusive or refurbished videos with details to help you get the most out of your learning. Check out awesome member discounts through our brand partners and enter to win monthly mystery boxes, listen in on our podcasts and follow our social channels. linktr.ee/WeldDotCom
Disclaimer: As an Affiliate and Industry Influencer, Weld.com earns from qualifying purchases via our posted links and affiliate links. Videos produced and made available by Weld.com or any of its affiliates, subsidiaries, or representatives (collectively, "Weld.com") are provided for informational purposes only. Although every effort has been made to provide the most accurate and useful information from sources believed to be reliable, no warranty, expressed or implied, is made regarding accuracy, adequacy, completeness, legality, reliability, or usefulness of any information. As tools, products, materials, equipment, techniques, and applicable laws, regulations and ordinances are constantly changing, Weld.com cannot and does not assume any responsibility or liability for the accuracy of the information contained herein. Under no circumstances shall Weld.com be responsible or liable in any way for any content, including but not limited to death, injury, errors or omissions in the content, or for any loss or damage of any kind incurred as a result of any content communicated in a video, on a website or by other means, whether displayed by Weld.com, or a third party in its original or a modified form. All content is subject to Weld.com and any third party's applicable terms and policies. Carefully review all terms and policies.
ALWAYS USE CAUTION WHEN UTILIZING ANY DISPLAYED TOOLS, EQUIPMENT, TECHNIQUES OR PROCESSES. IF EVER IN DOUBT, CONSULT A LICENSED PROFESSIONAL. ANY RELIANCE ON THE PRESENTED INFORMATION IS STRICTLY AT THE VIEWERS OWN RISK. EACH VIEWER EXPRESSLY AND VOLUNTARILY ASSUMES ANY AND ALL RISKS INCLUDING, BUT NOT LIMITED TO, DEATH, DISABILITY, AND/OR SERIOUS PHYSICAL INJURY RELATED TO THE USAGE OF ANY TOOLS, EQUIPMENT OR TECHNIQUES OR PROCESSES IN THE PRESENTED CONTENT. IN THE EVENT OF AN INJURY IMMEDIATELY SEEK MEDICAL ATTENTION.

Пікірлер: 2 600

@kraut5011 5 жыл бұрын

I was a welder for 40 years. This is one thing that I would tell new welders. "Always try to make your next weld better than the last one, even if the last one was the best that you have ever done."

@somethingoriginal5880 3 жыл бұрын

Thanks for the advice I’m starting welding next week

@LawrenceCaldwellAuthor 3 жыл бұрын

Do you ever miss it?

@kraut5011 3 жыл бұрын

@@LawrenceCaldwellAuthor Actually, I'm not missing it. I have an old stick machine that I bought at a yard sale for 35 dollars and a flux core wire welder that I bought at Harbor Freight. It's the kind that has an inverter instead of a transformer. It welds almost as smooth as a MIG welder and weighs only 15 pounds.

@LawrenceCaldwellAuthor 3 жыл бұрын

@@kraut5011 Awesome. I'm thinking about getting into it, but there's no schools around where I'm at.

@fuckingallthesehoes3295 3 жыл бұрын

LambentTyto teach yourself

@tomsPrivateVids 4 жыл бұрын

I love how he's preemptively angry at all of us. He tried to raise us right but we're a goddamn disappointment.

@FiremountaingodcK1 4 жыл бұрын

🤣🤣🤣🤣🤣

@mattkaru 4 жыл бұрын

My favorite part of this whole video lmao

@ClesW 4 жыл бұрын

I saw him in housto tx and he was a prick he was messing with a student over some glasses that he did not were in the both. then I told him let's se what u can do in the rack lol got scared!!

@logsandtimber 4 жыл бұрын

😂

@derbin4048 4 жыл бұрын

Best comment ever

@BTrapr40 5 жыл бұрын

“If I run outta rod, I run outta rod 🤷🏽‍♂️.” You hear that ladies 😂😂

@slayfadeaway3506 4 жыл бұрын

The Trap'R oh I think I get it is it when you have your eggplant as far in the peach and she moans and says deeper and the guys just like girl I’m in as far I can😂

@endurofan9854 4 жыл бұрын

Sanatic Plays 😂😂😂😂 😅

@mojo6524 4 жыл бұрын

@Christopher Carpenter that's when its time for the old reach around.

@timfagan816 4 жыл бұрын

Or when she looks at your egg plant and just says, "nah, you should probably just finger me instead"

@charger440 4 жыл бұрын

The Trap'R Welders have the HOTTEST ROD!

@6misery 4 жыл бұрын

damn, how did I even get kicked out of his classroom without even being in his classroom

@darkliquid6388 3 жыл бұрын

🤣🤣🤣🤣

@ichankomo8767 3 жыл бұрын

Yea man! Teacher's angry. Shhhhhhh..! 🤫 Dont be too obvious. ...anyways, hey..u gt cigarette? Keep it low he wont notice. I need 1

@epicmilfparty6125 3 жыл бұрын

Yea I would hate to have this guy as a teacher. Seems like a prick

@TheResn8r 2 жыл бұрын

🤣

@mikeye6171 2 жыл бұрын

@@epicmilfparty6125 not really he’s a good teacher lol

@Anarasha 5 жыл бұрын

I love how, every time you stop to say "Don't do this" or "Do yourself a favour and..." you can almost tell that a dozen student blunders come to mind. That's a sign of an experienced and skilled teacher

@BlooCollaGal 2 жыл бұрын

I'm taking Inspection & Testing right now and I do all those things on purpose so I can look at them under X-Ray

@joshuastinson4642 4 жыл бұрын

"mine's got a little curviture to it" 😂😂😂🤣🤣 Mine too buddy. Mine too.

@plusandminus5739 4 жыл бұрын

Welders dont share thia techniques, please watch and subscribe :kzfaq.info/get/bejne/jLGJfLSZv93UaI0.html

@jibblesq 4 жыл бұрын

@@plusandminus5739 poo video. Thanks.

@ASAPJermz 3 жыл бұрын

@@jibblesq 🤣

@WikkedR1 3 жыл бұрын

Ya gotta switch hands once in a while

@oronhalla8864 3 жыл бұрын

@@WikkedR1 best rod for 110 stick welding

@cheyennesandoval 4 жыл бұрын

"Come on darlin, light up dont be that way."

@TITO-uo3ot 4 жыл бұрын

Cheyenne Sandoval 🤣🤣🤣🤣🤣🤣

@TITO-uo3ot 4 жыл бұрын

I’m gonna leave this dangis right there

@cybertree 4 жыл бұрын

Welders on their honeymoon 🤣😂

@paulboyle1123 4 жыл бұрын

NICE

@handballduenas 4 жыл бұрын

Chula

@dedomv11 3 жыл бұрын

Excellent tutorial. I fall in the category of old guys learning how to do this, LOL.

@alexadams4132 3 жыл бұрын

Same here.

@richardparker9775 3 жыл бұрын

Solidarity brother!

@akirby2886 3 жыл бұрын

Me2 👋

@trjb1767 3 жыл бұрын

Me too.

@TheBlackSheepChronicles 3 жыл бұрын

Same..haha

@chrishatley9948 5 жыл бұрын

Nothing more satisfying when you go to chip slag and the entire piece just falls off with barely any force. This man is like the Bob Ross of welding

@NitroxNcrocz 5 жыл бұрын

Chris Hatley i was JUST gonna say the same thing!!!

@FernandoReyes-ue7ll 4 жыл бұрын

Chris Hatley that’s what happens when you use the electrodes he was naming

@benparker7773 4 жыл бұрын

Just putting it clear as day light.take your time and focus right heat and metal

@19Dimensions 3 жыл бұрын

Exactlyyyy 🥰

@Futurebeefcake 3 жыл бұрын

That’s what 7018’s are known for, and beautiful beads. if u have the correct heat and speed than any rod will result in a nice easy peel slag.

@timothybillingsley6716 7 жыл бұрын

College level welding course with no BS for free. I'll take that all day long. Thanks Bob, your expertise is very welcome.

@87caloriesperserving88 6 жыл бұрын

Timothy Billingsley watching someone weld is nothing compared to actually welding

@themisunderstoodgorilla7030 6 жыл бұрын

The more you know ...

@jeepwk6.5L 5 жыл бұрын

Without the degree lol

@engineerfavourcozuruigbo955 5 жыл бұрын

Timothy Billingsley how can I join the course my name is engineer favour c ozuruigbo +2347064674303.

@talaverajr391 5 жыл бұрын

Timothy Billingsley *welcomed

@TheManamba Жыл бұрын

I'm a hobby welder, learned from bits & pieces of advice from dozens of sources. This is the single most important piece of teaching I've gotten so far

@justinbrewer9776 4 жыл бұрын

When you said the word "dingus," I instantly almost cried laughing. I like this guys approach.

@bringer-of-change 2 жыл бұрын

I've never heard dingus used to describe an object before lol

@X249J 2 жыл бұрын

I'm not even a welder or a blue collar worker, this is just so damn cool. Watching experts do simple jobs casually and talking about it is one of the most fascinating things on Earth.

@Apistevist Жыл бұрын

You can get into welding for

@artstump3 Жыл бұрын

Welding is an artful skill . Not a simply casual job

@Highwaymert Жыл бұрын

He makes it look casual and simple cause he’s a master with years and years of experience, welding is definitely an art form that some can never pick up even if they practice over and over, you have to have the nac for it and then put in the years to master it

@nektin9923 10 ай бұрын

Simple AMP kaon pakag lamaw

@W1HURI 7 ай бұрын

Took me 4 months to master welding people just want to make it sound harder than it is

@farmerjoebrown2189 2 жыл бұрын

I really appreciate these videos. As a farmboy and working at the power plant i dont have time to take classes but now i can learn from all you great trainers.

@damienwellman585 5 ай бұрын

Being a college student who is taking a class for welding this helps me out especially when I’m struggling

@TheyCallMeCoolRon 4 жыл бұрын

When listening to this man teach, I think back to to my late father whom was retired army, combat vet, teaching me how to fix my own equipment. Something soothing in his tone and how he breaks me down to build me up.

@legittherapper7223 5 жыл бұрын

As a high school welder, i find this very helpful, thank you.

@factualopinions5256 6 жыл бұрын

"I'm good at sticking rod" lmao I see what you did there old man. Niccceeee

@KneesBitten 4 жыл бұрын

Hah! Gheeeeeeeeeey~!

@OriginalPuro 4 жыл бұрын

I think you must be between 15 and 18 years of age to still think sentences like that have any correlation to sex.

@ethanweeter2732 3 жыл бұрын

Pipe fitters probably brag they know how to lay pipe real well.😂😂

@jvogler_art4708 Жыл бұрын

been taking a welding class, i'm on day 2 and they're teaching us to run straight beads and are having us hold the stick at a very straight angle... your welds look way better than the instructors. and the 45 degree angel seems so much better than what they teach.

@punishedexistence 4 жыл бұрын

Haha, I remember how I learned how to weld. At my old job, my boss was an old man...nice guy but he sucked ass at welding...looked like a line of chewing gum stuck in the joint. I never took any classes or anything, I just started messing with the machine after work and just practicing. The bosses son was the foreman there and he told me just do what it takes so the ol man won't ruin welds that we gotta look at. After a few weeks, I got pretty good then told the ol man let me have a crack at it. He about shit himself when I made a nearly perfect stack of dimes for a weld and just handed the stinger to me and said...this is your job now. And honestly, I suck at welding but for the purposes of what we were doing, it was fine. Now against this guy I'd look like a total choad. But that's ok, I never claimed to be great, I just like watching metal melt in a hot electric arc.

@phillhuddleston9445 4 жыл бұрын

Job security is being better than the next guy in line.

@plusandminus5739 4 жыл бұрын

Welders dont share thia techniques, please watch and subscribe :kzfaq.info/get/bejne/jLGJfLSZv93UaI0.html

@amirpatel9988 3 жыл бұрын

I am an amateur my welding rod just gets stuck on touching, what am I suppose to do?

@calvinhandley2373 3 жыл бұрын

Amir Patel keep practicing, and burning rods. Everybody has that problem. You will eventually find the technique so scratching the rod against the plate that gets the arc started for you. This guy, and a handful of others on KZfaq are good welding instructors, and you can learn a lot from them. But you will learn the most doing exactly what they are telling you and just keep burning rod until it comes naturally.

@Toastboy9129 3 жыл бұрын

@@calvinhandley2373 that’s so true I burned hundreds of rods to get good just at 6010 but man is it worth it to have that perfect bead.

@michaelwest4525 5 жыл бұрын

I really appreciate your instruction . I am 76 and getting back into a bit of welding and you make me aware I have a lot to learn . I’m going to sign up for some welding classes and hope my instructor is half as good as you at explaining things .

@theskrublords 2 жыл бұрын

Damn you're 76 taking classes? May I ask why?

@michaelwest4525 2 жыл бұрын

@@theskrublords I am almost 80 now and still like playing around with welding . It doesn’t seem so old when you reach it , if you still feel ok . I like projects . Makes one feel productive through my non - earning years .

@loganblackwood2922 Жыл бұрын

@@michaelwest4525 You're a gem of a man. Hope you're well.

@michaelwest4525 Жыл бұрын

@@loganblackwood2922 Thank you . Am 80 now and doing well . Hope your doing well also .

@chuck5083 Жыл бұрын

@@michaelwest4525 I'm 55 and a total newby to welding. Infact this is my first instructional video recommended by my teacher. I've been doubtful and embarrassed about my late entry into this trade, until I read your comment and your age. Now I am highly motivated! Thank you!!

@paigeteevans 4 жыл бұрын

I’m out here using my coronavirus self quarantine time to learn to weld like, im not going to weld?

@shahdiraidris9303 4 жыл бұрын

damn.. me too dude

@fivv. 4 жыл бұрын

paige Imma weld

@whatyouwerethinking998 4 жыл бұрын

Same here

@ganakil 4 жыл бұрын

coronawelding

@iambutafish 4 жыл бұрын

I like just having the knowledge of how things are done so if I ever end up having to survive in the apocalypse I can at least "try" to put shit together. Welding is one, electricity and plumbing are some others as well as gardening and raising livestock. I may not be a master, but I'll know enough to make things work, yknow?

@AndrewFosterSheff69 11 ай бұрын

Thank you for recognising me. I'm an old guy just getting started. Fed up of paying for "spot weld repairs" when if I knew what I was doing I could probably do a better job myself!

@fred463 3 жыл бұрын

I bought an oxy acetylene set up and taught myself to weld 40 years ago..then 20 years ago I bought a mig, ten years ago a tig. Watching these videos has made me better on all of them. Thanks.

@eldiabloblanco3167 2 жыл бұрын

Feelings get you nowhere. His knowledge is priceless. If you can't take someone telling you direct, then keep it moving. I love and appreciate teachers like this.

@mrsmith7581 4 жыл бұрын

“Please, please do that for me.” I love this guy 👌🏼

@skyjumper1653 Жыл бұрын

Learned more in this video than two weeks in welding school. Instructors should be required to watch these videos. He’s navy seal smooth

@quintinwebster8645 3 жыл бұрын

this video is about 3 and a half years old from when I watched it, I've been in a welding program for a few months now and I still learned something new

@michealdchastain3637 3 жыл бұрын

"Come on, Darling." Lol! So glad to hear I'm not the only person that talks 'sweet' to their work pieces.

@wargamingsupernoob 3 жыл бұрын

Same here.

@pcsmith3408 6 жыл бұрын

Sir greetings from Mumbai - India. I am a mechanical engineer and trainer myself. Not of welding though. Recently bought a 200 amp welding inverter. Found your video to be the best. Simple, lucid and no nonsense instructions. I am impressed. Thank you. Highly appreciate the good work. Regards and best wishes from India.

@28godzilla 8 ай бұрын

I’ve been welding since 2019, I started college with 2 basic welding classes. And I passed all classes, completed flux core, mig, tig, pipe weld, and even did gas welding. I now have a apprentice job with a company that I plan on staying with till I retire. It was this video that got me intrigued and made we want to try welding. I thank you Bob Moffatt and your team for getting me into this big field of blue collar work! This is what I want to fulfill my career with.

@skiclark8541 3 жыл бұрын

You wouldn’t have to have the slightest interested in welding at all would you but to just happen by and pick up on Bobs easygoing and entertaining way. I love it.

@toddgibbs1321 5 жыл бұрын

Sir, you are an artist! I am an absolute novice but I love to see a proper weld and have a huge amount of respect for the people that take this much pride in the quality of what they do.

@BrokenLifeCycle 4 жыл бұрын

I've watched many welding guide videos way before I started welding for real on my hobbies, but this one is the first I've ever watched, and it has helped me greatly down the line.

@craigfisherman2880 Жыл бұрын

I see what you did there

@aaronderossett3998 2 жыл бұрын

Years ago my grandfather, who is now passed, taught me to never look at a welding arc. To this day, I look away from videos when anyone is welding even though I know deep down that the video wont blind me lol.

@johnpogany2444 2 жыл бұрын

I’ve welded for over 40 years and I’ve never seen someone especially a welding instructor weld with two hands

@turtleenosnipes6102 3 жыл бұрын

I'm 15 and I sold my dirt bike to get me a welder and I cant wait to learn to make my dad proud!!

@kennethtalbott2233 3 жыл бұрын

just be a good person, he'll be well proud of that.

@scottybabb6297 6 жыл бұрын

Bob, thank you for the priceless education. I have enjoyed watching your videos over and over. I was in a bad car wreck 6 years ago, haven't worked since. I'm trying to build barbecues to bring in some income to help out my wife. You have no idea how important the info you've given me is. Thanks!

@ashy1423 6 жыл бұрын

Scotty Babb hope you are successful in your endeavours.

@DobermansRock 5 жыл бұрын

Hell yeah man don't let the accident take your skills or pursuits and shove them in a drawer. You have the right idea and know what BBQs sell for in Texas if they are built right. Hundreds of dollars. Screw bumpers man. If you can do a good grill. Texas get into it.

@rn6045 4 жыл бұрын

Awesome

@patrickhorvath2684 2 жыл бұрын

@@DobermansRock Texas. Bigger than France.

@lena19191 4 жыл бұрын

This guys knows his stuff ....wants perfection, bit of dry humour..great teacher.... even picks on his own work for not being straight...and gives a shout out to “ mig man “ ..that’s a master of trade

@jerryleejohnsonjr1377 Жыл бұрын

I'm one of the old guys starting out with my first buzz box, Thank you for the excellent content and for sharing your talents. Really great channel!!

@savannah-by9ys 4 жыл бұрын

"I wonder what this tastes like... ...better not."

@cybertree 4 жыл бұрын

He seems like the coolest teacher ever.

@hook86 4 жыл бұрын

Lmfao that cracked me up

@Alveda_Killfrickle4162 3 жыл бұрын

That made me laugh so hard lol. This guy is funny and a good teacher

@dregenius 3 жыл бұрын

Forbidden Pringle lol

@Mikey-ym6ok 3 жыл бұрын

It doesn’t taste good. Trust me.

@Ajames2331 7 жыл бұрын

I weld every day and still get excited when I see you post a new video because I know I'm going to learn something.

@noroomforgloom 10 ай бұрын

Your patience is refreshing. I’ve just started welding due to not having much luck finding good tradesmen in this field willing to serve joe public. Welding is an art that can leave one filling good when your weld’s both do their job and turn out looking pretty good. Your teaching by doing really makes a big difference for me. I find that while watching you weld and your explaining as you go makes for good instruction. Thanks, JL

@gordjohnson70 4 жыл бұрын

Another great video Bob... After a while, when they get the hang of it....first pass left to right, next pass right to left.... keep changing... right to left then left to right. Don't be a "one trick pony". Also, learn to weld with both hands. It sure comes in handy when you find yourself out of position and have to REACH out for welds. Again... "Don't be a one trick pony" !!!

@xRawlins 6 жыл бұрын

I wish all these instructional welding videos were taught by Bob Moffat. No BS, straight to the point instructions with amazing advice. Makes me want to take a vacation and fly from California to Arkansas just to take a few classes...

@tonydaza8504 2 жыл бұрын

Let me guess they make it seem like rocket science even though it’s fucking simple

@blackly999 4 жыл бұрын

"I'm good at stickin rod" 😁😁😁

@1polyron1 3 жыл бұрын

#metoo

@mrmyorky5634 Жыл бұрын

What a pleasure to watch a real welder who can make good welds with the amp's low enough to avoid spatter and who can also explain in detail what he's doing and why. Thank you.

@iplaymytele 4 жыл бұрын

You remind me of my shop instructor Mr. Jackson in high school... One minute he was impatient with you next minute he was praising you you are a good teacher and I love welding....! I’m 65 years old my grandfather taught me how to weld when I was 13..! So by the time I got into high school welding and metal shop was a breeze......🎓👍

@ryanjones9305 7 жыл бұрын

I like how you sweet talk your rod to get her going. I'm pretty much the exact opposite. I find if I insult it, the sumbitch runs perfect every time. On the dangers of chipping hot slag...just the other day, I was welding in a tight inside corner, got to the end, WITH MY HOOD DOWN...I whacked the end of the bead to see if I filled the crater at the end enough....last weld of the day...dadgum chunk of slag made its way inside my hood and stuck to my top eye lid...it felt awesome. A little pain never hurt anyone.

@markfryer9880 7 жыл бұрын

I'm hearing you loud and clear, we've all done it and had near misses, close misses and bulls eyes.

@johndowe7003 7 жыл бұрын

gotta have them pecker detectors covered with atleast two pairs of saftey squints! may hot slg miss your eyeballs everytime

@HITANASG1 7 жыл бұрын

john dowe not sure if AvE reference

@ryanjones9305 7 жыл бұрын

+chris jones ha! well that oughta get her goin for sure!

@toemarsastro2276 6 жыл бұрын

Ryan Jones

@HazedHoonigan 7 жыл бұрын

i worked with a master mechanic, who remind me a lot of bob. no bs, this is how it needs to be done. straight to the point hah

@CarLoNarra169 2 жыл бұрын

Im 16 yrs old i just finish high school and im practicing welding start this day i watch i lot of tutorials that will help me

@marksarovich5534 3 жыл бұрын

After watching many of your videos, I just discovered you're LEFT HANDED!

@shiftyy2786 4 жыл бұрын

Thank you for creating this video!! I’m in my second month of my first year of welding at school. This has been my biggest challenge so far- just running straight beads without using another plate to guide me! I have to admit it was encouraging to see even you, a professional, stick a rod haha.

@RenAmamiya15200 Жыл бұрын

How is welding,is it hard?

@noelandrews7509 Жыл бұрын

@@RenAmamiya15200 it's easy af once you get it. Have a go mate nothing to loose. Good luck 😊

@johndoe7109 9 ай бұрын

So it's been 3yrs since your comment. Hows it going with the welding?

@shiftyy2786 9 ай бұрын

@@johndoe7109 thank you for asking! Sadly it fell through because of the pandemic… the school wanted us to somehow go all online learning but pay the same in tuition? So I switched into an office job. But, welding was amazing and I’m grateful for what I learned. Would love to try again one day maybe as a hobby not a career

@gregnorris8039 7 жыл бұрын

so refreshing watching you Bob. there are so many amateurs trying to show how its done with absolutely no idea of the science of what it is they are doing. we remember what you teach and very much appreciate your time. thank you Bob.

@viscache1 3 жыл бұрын

Thanks for the thoughtful darkening of the picture. Most welding videos blast the bright welding flash. It triggers two day long migraines and I never see the detail that you show. I learned something new because of your thoughtful editing! 🤗

@giraffeheavyfactory 3 жыл бұрын

I tried first stick welding with your video and I succeeded. I always laugh and say "welcome to the stick welding" like you when my rod stuck. This is the trick for me to make the next bead regardless of failure. THANK YOU!

@Farmaci86 4 жыл бұрын

He remains one of the best welding instructors I have laid my eyes upon to this date. I salute to you sir!

@brianbeaubien7371 2 жыл бұрын

Bob I have taught welding for years; I always enjoy your presentations and skill level is superlative thank you!

@BlackenedEclipse 11 ай бұрын

As a retired US, Air Force engine, propulsion mechanic who wants to start welding, laying down some good beads, I really appreciate the value your sharing this video. Thank you. 🇺🇸👍🏽

@Welddotcom 11 ай бұрын

We appreciate your service and are happy to help out!

@PeakyBlinder 3 жыл бұрын

Bro I'm in the UK and learning to weld and braze, Your channel has helped me so much so thank you for all this information. I don't have a welder I'm trying to master oxy acetylene welding before I dive into the world of arc or Tig, Thank you.

@johnnoredy1762 5 жыл бұрын

“IM GOOD AT STICKING RODS “ 😂

@timbo7239 6 жыл бұрын

“Im good at stickin rods”

@tarnvedra9952 6 жыл бұрын

"Welcome to stick welding."

@jerrysgardentractorsengine2243 6 жыл бұрын

It’s called stick welding for a reason

@ziggymolnar1246 5 жыл бұрын

I was just going to write this exact comment 🤣🤣

@alfonsoalba8930 5 жыл бұрын

In your ass

@Mikey-ym6ok 5 жыл бұрын

Was thinking what all of y all was thinking when I heard that lmfao

@sundowngates2087 2 жыл бұрын

I was taught how to weld by a fab shop foreman. I ran into a problem once and asked him for help diagnosing my issue. His response was, "walk me through your troubleshooting process". At that moment, i realized all welders experience problems and they learn how to work through them.

@mr.rotten9915 9 ай бұрын

I just started welding at the concrete plant I work at. I know just started means many things but I mean I started last week and I'm trying to make as many improvements as I can to show I'm not just a dumb kid there for a paycheck. I'm always trying to learn and get better at skills so I can have experience to teach other people in my shoes. This advice was extremely helpful for me.

@mmjgrace321 7 жыл бұрын

Really enjoy your videos. I've been a self-taught welder out of high school shop class for years, but I'm going back and learning a lot of the basics I've missed from you. Great Job, very clear explanation and your camera man's work is excellent!

@claw9160 5 жыл бұрын

You're not self taught if you took a class

@paulwest3583 6 жыл бұрын

thank for this video, i'm just learning and this was a big help. 57 years old and still learning

@NatsumiMK 5 жыл бұрын

I'm just starting at 27

@luisestioko23 5 жыл бұрын

Me by next year oi go to school for welding

@NatsumiMK 5 жыл бұрын

@@luisestioko23 good luck

@luisestioko23 5 жыл бұрын

@@NatsumiMK is a 2 year degree can have a good salary already??as a welder..

@NatsumiMK 5 жыл бұрын

@@luisestioko23 Stay in there for two to five years

@optimusprime77x 9 ай бұрын

Workin for the state, and learning here in a minute how to weld and brushing up on these videos first. Thanks ya much man.

@lynnelanguedoc4049 3 жыл бұрын

Thanks for not leaving out the old guys on getting started.Tony

@vanPoll 4 жыл бұрын

I wish I had a teacher like him.

@vanPoll 4 жыл бұрын

@Karen Sanders Not everybody is born to learn others some skills. He truly is.

@m.o.f9802 3 жыл бұрын

I learned electrode welding when i was 14 my welds are looking really good.

@Face2theScr33n Жыл бұрын

Thanks for this, I just bought a stick welder and have only just begun to attain limited success (AKA I suck haha) I'm one of the "older guys" just getting started. 40 years old is not too late! Every bit of advice helps! Thanks again!

@dariusacevedo6369 Жыл бұрын

"bad habit of welding towards yourself" even though im just at the 2nd week of our actual welding our instructor told us to do exactly that & i struggled badly but i defied what our instructor told us to do & i welded starting near me going away, & boy did i nail it, & it was on flat...

@PercyJackson93 Жыл бұрын

That way you can get slack in your welds apparently, when pushing away. Just learning myself.

@DaylightRobberyCA 6 жыл бұрын

He sweet talked that electrode!! Classic, just classic. Love it.

@roydog8985 4 жыл бұрын

Thank you so much for ur time to teach us how to be better welder’s and doing the right things with all kinds of details

@ericMT 5 жыл бұрын

Best left handed welding instructor on KZfaq.

@wakawaka1976 4 жыл бұрын

How did KZfaq know I’d be interested in this? I don’t look up welding stuff but an uncle let me try it out one time... Was just thinking about visiting him again.

@kimcurtis9366 5 жыл бұрын

THANK YOU! I'm TOTALLY new to stick welding and know very little about welding, in general! Your videos help A LOT!

@sushi_wolf 4 жыл бұрын

Kim Curtis hows it going 10 months in, I’m new myself tonight was my first go.

@justinmyers6351 4 жыл бұрын

@@sushi_wolf how did you do

@sushi_wolf 4 жыл бұрын

Justin Myers getting better, doing smaw with 6010, did some 7018 tonight, midterms next Wednesday we will be displaying butt joint lap and t , not bad on butts and laps having a little undercut on the t, definitely much better than my first night, learning to brace off of myself and secondary on walls ect. Thanks for asking, hoping to become as good as the pros.

@justinmyers6351 4 жыл бұрын

@@sushi_wolf I hear ya, I'm just getting into ironworking fresh out of the military. About to move states and learn as much as I can. You can never learn too much

@sushi_wolf 4 жыл бұрын

Justin Myers good luck to you, I am going to be doing a little metallurgy as well, best of luck.

@speedsterh 5 жыл бұрын

Impressive steady hand. Amazing, thanks for your lesson !

@nicholecrouch311 4 жыл бұрын

I have an antique Marquette Redi Arc 180 amp AC welder that was made in the 50s or 60s and it runs great I must say I only normally run 6013 and 7018ac sticks and after watching this video you make me want to go by every kind of Rod and start practicing with the ones that are not so good at I like 6013 and 7018 because they are easy to weld with when I'm welding Rifle and Pistol bullet traps together and general farm equipment maintenance I haven't really ever had a need to use the other electrodes at least I don't think I have I'm not a pro I just do it for a hobby and I used to work on a farm and I maintenance the tractors and the Box blades and all the attachments that the old farmer I worked for had and my first year there I spent probably a quarter that time welding and repairing a lot of the old pieces of equipment that he had that had a lot of Broken welds on them and a lot of cracked welds as well I'll never forget him he thanked me so many times for that because he was taking all this stuff to a Pro welder that was charging him insane prices or at least that's what I thought for even really simple welds like I said I'm not a pro I've just been doing it for a hobby for almost 15 years and overtime I've acquired an antique Eutectic 225 AC stick welder, and then I went and picked up a flux core welder just a cheapo from Harbor Freight what's actually turns out to be a decent welder in the right hands, I just pick that up to weld the exhaust pipe on my pickup, recently I just picked up an antique Marquette Redi Arc 180 amp AC welder and for being made between the fifties and sixties 60s that thing runs remarkably well, I had to make my own leads for it, but only paid $65 for the welder and it lays down some damn good beads and I'm sure a lot of the pro welders that do it professionally would probably laugh at the dinosaur machines that I got but they both run extremely well and I paid 65 for 1 and Eutectic I picked up for 25 bucks at a garage sale and that one has definitely paid for itself probably a thousand times by now lol

@josephwhite9992 4 жыл бұрын

I've had my everlast welder for over 5 years and have never stick welded before. I'm going to give it a try with Bob's advice in my ear the whole time.

@morganroberts1111 6 жыл бұрын

I clicked here just to get a visual idea about how to make a basic weld. And got a lesson in craftsmanship instead. Helped me understand what my Dad (Bob the Boilermaker) never got to teach me all those years ago. I kinda like getting taught new skills by blokes named Bob. Thank you indeed!

@KARLSSONEMA 5 жыл бұрын

I've been watching these videos here from Sweden with a delight! Thank you for making the content public. I'd like to see more "garagewelding" for us diy. Stickwelding that is :) Also more welding with smaller more portable models and some words on how this affects the approach. One application for instance is thinn wall round tubing (construction steel) lying flat on a hardox 400 steel plate. Sort of like a diy hinge mechanism type of situation. How to controll slagg and how to make sure you mix well with the host materials when one is thinnwalled and the other very thick. Also tip regarding hardfacing on the edge on 8 mm steel plates and on the face of similar steel steel. What to think about and how it affects the steel you're welding. Fast, slow and moderate cooling and the effects on the host and electrode materials. Also I'd like you to talk some about how vibrations and different types of bending affects the weld. End-craters, convex and concave form of a weld on 90 degree angles for instance. Very basic information but stuff that highly affect (at i guess so) how a skilled welder approaches a problem compared to me (a novice). As you can see im a happy novice with almost no knowledge but if these videos could close some gaps between licens welder audience and novice i think you'll find a bigger target area of viewers :)

@Adrian2140 3 жыл бұрын

I live in the woods and youtube is my only teacher. Thank you kindly. I plan on going through several online training videos on everything welding before I go ahead and buy the equipment.

@yado7550 3 жыл бұрын

I've never welded a thing in my life but you make me want to

@mildot5482 3 жыл бұрын

Ok but pay attention on your electric bill

@oldprophet 5 жыл бұрын

The good part about this, Your never to old to learn. Thank You.

@israelocampo6925 6 жыл бұрын

I love how he talks to his equipments

@bromajik5183 4 жыл бұрын

Great video I learned more about welding in 12 mins then I did in a week at welding school the instructor's never mentioned that it wasn't a good idea to weld towards me and that's what been messing me up. you may be old but you are very Wise

@treymendus 4 жыл бұрын

Your tutorials are brilliant. So is your channel. So informative and direct. Im a middle aged man who's new to welding so I'm a complete beginner. Your videos explain exactly what I want to know. Keep 'em coming. Thank you very much. 🙏👍✌

@200xcBruce 7 жыл бұрын

Bob your very entertaining along with informative. Would enjoy having you as an instructor, but at 60 I am learning via your videos.

@marionburris7740 5 жыл бұрын

Bruce Kennedy Is

@stefanbrown8176 7 жыл бұрын

he is a fantastic trainer he knows what he is talking about and has the skills to prove it

@michaelpellegrim5104 4 жыл бұрын

Thanks for the videos! Going to AAI for combination welding and still have trouble doing beads in the vertical. Got my own machine to practice at home now. Thanks again

@ronackerman7648 4 жыл бұрын

Thank you for this video. I stumbled upon it and always wanted to learn how to weld, when I was little I saw my dad welding several times but to small for him to teach me, now I want to get into as part of my survival training education. Unfortunately I'm big cities like Miami we lack the tradesman schools that one will find in small urban communities, that's why videos like yours are so important, keep it up, and thanks for sharing your knowledge.

@RgW00D 6 жыл бұрын

Can you do a lesson on how to talk to your machines?

@chanakyasinha8046 5 жыл бұрын

Just kiss the stick with another terminal stuck to ur body 😂

@maxwebster7572 5 жыл бұрын

@@chanakyasinha8046 That's total BS. You need some of that gel they use on the tens machine first.

@WineScrounger 4 жыл бұрын

"Focus you fuck"

@plusandminus5739 4 жыл бұрын

Welders dont share thia techniques, please watch and subscribe :kzfaq.info/get/bejne/jLGJfLSZv93UaI0.html

@tupcho33 4 жыл бұрын

After you goofed up ,,it is not your fault Lary, i am sure that the clamped 200lbs steel was moving too much for you to drill it " if it happens to work out ,,we can work on that ... Don't worry , please do you job and i will do mine and weight work it out as you ,,see" "

@rickyrick9328 6 жыл бұрын

You are the Bob Ross of stick welding.

@martijnvv8031 5 жыл бұрын

"Today we're going to weld a happy little tree with a vanDyke brown stick"

@fireboy5043 Жыл бұрын

i did welding at Avondale Shipyard fort 20 years every this man is saying i agree 100 percent

@Brotherav6 3 жыл бұрын

I like your videos I've been working for a welding company for almost 4 years now and I've practiced with stick weld, duel shield, tig, just trying to learn no one wants to take the time to teach me, it has come to me watching videos to fill in the gaps your videos help alot thank you for taking time to make these videos.

@ashy1423 6 жыл бұрын

Thank you for sharing your time and expertise with us.

@crisgarcia8788 2 жыл бұрын

thanks for making these videos my dude, i’m on my first year of welding and it’s always helpful getting tips from more experienced welders !🤟

@poshgentleman559 Жыл бұрын

Here is a tip, that is more important than any other: always wear a respirator when welding, and have good extraction. Make this your top priority......welding can seriously damage your lungs, if you don,t protect them. Also, when using a hand grinder, always protect your lungs as well. Even if it did not kill you: it could give you chest infections, bronchitis, and new pneumonia. Make this tip: your number one priority: If you intend to weld long term.