Please support my channel by buy this plan: www.etsy.com/listing/1673261698 Inbox me: / vuvt.workshop #vuvt #weldingtable #weldingtablediy #weldingtablewithclamp #diyweldingtable
Пікірлер: 153
@VuVT-Workshop2 ай бұрын
Please support my channel by buy this plan: www.etsy.com/listing/1673261698 Inbox me: facebook.com/vuvt.workshop
@5hilovsky9347 ай бұрын
Отличный стол, спасиб за идею 😊
@TheGoatShowMan5 ай бұрын
Thats a bad ass table, congrats! As good as I've seen yet. Domo Arigato.
@TheMbn19729 ай бұрын
Thats an awesome table and an awesome build video.....lots of creative and functional details!
@VuVT-Workshop9 ай бұрын
Thank Bro!
@mikequas43847 ай бұрын
Best designed fab table I've seen in a while. If you could make a set of plans for that table, it would make a relly nice side hustle!
@VuVT-Workshop7 ай бұрын
Thank you, I will make plans for it soon
@WinstonWolf1875 ай бұрын
Yep… Really, really nice job man. You get some plans made let us know!
@ThePiitteri6 ай бұрын
You are a master of your craft. Thank you for ideas
@VuVT-Workshop6 ай бұрын
Thanks Bro!
@HisNameIsTater2 ай бұрын
Nice job! i saved this as this is very close to what I'm building and really like some of your ideas. Well done sir!
@VuVT-Workshop2 ай бұрын
Thanks Bro!
@user-dh3vy8wm7e22 күн бұрын
Dude this table is genius
@VuVT-Workshop22 күн бұрын
Thanks Bro! See my other projects
@lowtech_16 ай бұрын
Like those extensions 👌 great idea .Thanks.
@VuVT-Workshop6 ай бұрын
Thanks Bro!
@kevincinnamontoast36696 ай бұрын
Lovely. Great table. Thnx for your hard work.
@VuVT-Workshop6 ай бұрын
Ok Bro!
@thepagan543210 ай бұрын
Nice job, a good weld/assembly table is worth it's weight in gold. 👍👍
@VuVT-Workshop10 ай бұрын
Thank you Bro
@mikesnifferpippets37336 ай бұрын
Very nice table. I like how you used separate plates and didn’t weld them to the frame (keeps from warping when welded). I never though to use 2 pieces of angle iron to box the slide extensions, another great idea!
@VuVT-Workshop6 ай бұрын
Thank Bro! After a long period of use, you can turn the iron plates over and you will have a new table top
@gb440813 күн бұрын
Did you drill the table plates yourself, i never saw you do that, or were they pre-made?
@andyb77545 ай бұрын
Vewry nice build. Thank you for the video.
@VuVT-Workshop5 ай бұрын
Thanks Bro!
@darejka8886 ай бұрын
Very good solutions, congratulations to you.👏
@VuVT-Workshop6 ай бұрын
Thanks Bro!
@EverydayWorkshop4 ай бұрын
Great job, I like the design. I’m planning on building a new welding table and love some of your ideas. 👍🙂
@VuVT-Workshop4 ай бұрын
Thanks Bro!
@enricodigenova81123 ай бұрын
Great job love the table 👌👌👌
@VuVT-Workshop3 ай бұрын
Thanks Bro!
@user-vq8sp7ch5t5 ай бұрын
좋은영상 감사합니다
@VuVT-Workshop5 ай бұрын
Ok Bro!
@robertoloreto7901 Жыл бұрын
Ótimo trabalho! Parabéns
@VuVT-Workshop11 ай бұрын
Thanks Bro
@user-op9jp4vf5k11 ай бұрын
Шедевр, всё продумал!
@VuVT-Workshop11 ай бұрын
Thank you
@jayquast29109 ай бұрын
Hi there, wonderful build. Can you please tell me where you got your bolt for the floating table, I can’t find them anywhere. The ones that I have found have shoulders on them?
@VuVT-Workshop9 ай бұрын
Hi Bro! I do not understand what you mean. Are you finding: "Flat Head Socket Cap Screws"
@zonenhonig8777 ай бұрын
Hi, cool idea, well done! What size do the pipes have? 40x40 x 2/3 mm?
@VuVT-Workshop7 ай бұрын
One plate is 12mm thick, length x width: 700 x 200 mm
@jaroslavkukucka7363 ай бұрын
Nice
@DazFab_Metalworks11 ай бұрын
Nice work.
@VuVT-Workshop11 ай бұрын
Thanks Bro
@mohamedrahal48293 ай бұрын
Well done, long, very beautiful. Well done, hero. Excellent work. My regards to you❤❤❤❤
@VuVT-Workshop3 ай бұрын
Thanks Bro!
@itzsamdiy7 ай бұрын
Nice build
@VuVT-Workshop7 ай бұрын
Thanks Bro!
@chrissample30474 ай бұрын
Good idea of adjusts on bottom legs
@VuVT-Workshop4 ай бұрын
Thanks Bro!
@marianradu68569 ай бұрын
Nice welding table. I have been using Sigemund welding tables for a long time. Make stops in the holes where you can support yourself with the pipes when you weld them together and then they are already set at 90 degrees. this if the holes are made at 90 degrees.
@VuVT-Workshop9 ай бұрын
Thank you. That's a great idea 👍
@Everythingisgoingtobealright4 ай бұрын
nice table and video.
@VuVT-Workshop4 ай бұрын
Thanks Bro!
@phucnguyenCNC Жыл бұрын
Đẹp!
@crazychop796610 ай бұрын
Классно 👍🏼
@user-oq7xg8jo5g23 күн бұрын
Nice work
@VuVT-Workshop23 күн бұрын
Thanks Bro!
@gustavoabarzuavega35397 ай бұрын
Excellent work, a question, what diameter are the holes in the table and how much separation is there between each one? thank you
@VuVT-Workshop7 ай бұрын
The holes have a diameter of 12mm, the distance between holes is 50mm 🙂
@gustavoabarzuavega35397 ай бұрын
@@VuVT-Workshop Thanks
@tnguyen5925 Жыл бұрын
Được lắm bạn ơi ❤
@VuVT-Workshop Жыл бұрын
Thanks. Qua fb giao lưu nhé B
@bubusquidgame15887 ай бұрын
Cái bàn quá chất lượng....!!!!
@VuVT-Workshop7 ай бұрын
Thanks Bro!
@Ropetangler3 ай бұрын
Lots of good ideas with your table, and I really liked your feed roller for the bandsaw shown at the 40 second mark. Did you fabricate that yourself?
@VuVT-Workshop3 ай бұрын
That roller is from Makita. Thanks Bro!
@Ropetangler3 ай бұрын
OH, O.K. I will have to see if they are available in Australia. Thank you for your prompt reply.@@VuVT-Workshop
@joshwhitehead20453 ай бұрын
This is terrific work!! What side steel are you using for the frame? It is 40x40 or 50x50 SHS? I can't quite work out on your video.
@VuVT-Workshop3 ай бұрын
Thanks Bro! It is 50x50 mm
@xerbababa6 ай бұрын
I've been looking at reproducing this table for my build. I'm fairly confident on build dimensions using some 3D drafting software and spending sizeable time with your video. I have been looking for the cabinet you used. Can you identify make/model or at minimum, can you identify size (length, width, and height) of the green cabinet? Thank-you
@VuVT-Workshop6 ай бұрын
Great. The cabinet is made by OS company in Japan. WxH: 42x54 cm
@andrejsimcic47712 ай бұрын
What is the thicknes of the steel plates on the tabel?
@rickardocalles247319 күн бұрын
Exelente sería genial si pudieras poner las medidas del material 🤙
@VuVT-Workshop19 күн бұрын
Thanks Bro!
@jeffnix33073 ай бұрын
Well done
@VuVT-Workshop3 ай бұрын
Thanks Bro!
@bernarddehon804018 күн бұрын
pourriez vous SVP me donner les dimensions de tous les tubes avec le plan complet merci
@farmaproderma9 ай бұрын
REally nice! Would you share/sell the plans?
@VuVT-Workshop9 ай бұрын
Sr. I don't have a plans
@knightrider64788 ай бұрын
Hello, nice build. Which is the thickness of the plates and length? In metrics if possible. Thank you !
@VuVT-Workshop8 ай бұрын
One plate is 12mm thick, length x width: 700 x 200 mm
@yurievich_workshop2 ай бұрын
зачётный стол. Многое продумано.
@VuVT-Workshop2 ай бұрын
Thanks Bro!
@aishora-di4fm5 ай бұрын
Прекрасный стол! Я бы хотел иметь такой без всяких изменений!
@VuVT-Workshop5 ай бұрын
Connect me via facebook
@nevzatmumcu19184 ай бұрын
Meister der Kunst ❤
@VuVT-Workshop4 ай бұрын
Thanks Bro!
@nevzatmumcu19184 ай бұрын
@@VuVT-WorkshopCan you please write down the dimensions and the number of pieces would be very grateful.
@VuVT-Workshop4 ай бұрын
@@nevzatmumcu1918 One plate is 12mm thick, length x width: 700 x 200 mm
@nevzatmumcu19184 ай бұрын
@@VuVT-Workshop Danke
@averybrown58883 ай бұрын
like it
@VuVT-Workshop3 ай бұрын
Thanks Bro!
@nullkuhl5 ай бұрын
Awesome job, what is the thickness and dimensions of top plates?
@VuVT-Workshop5 ай бұрын
One plate is 12mm thick, length x width: 700 x 200 mm
@andrejsimcic47712 ай бұрын
Did it warp or bend over time?
@VuVT-Workshop2 ай бұрын
@@andrejsimcic4771 I'm just DIY
@Leandxeneize9 ай бұрын
amigo Friend. cual es la altura de la mesa desde el inicio del piso hasta la chapa perforada
@VuVT-Workshop9 ай бұрын
Table height 80-90 cm is suitable for me
@Leandxeneize9 ай бұрын
@@VuVT-Workshop muchas gracias thanks
@pietstephen7776 Жыл бұрын
Those c clamps...are they magnetic??
@VuVT-Workshop Жыл бұрын
They have no magnetic I soldered the screws below. Haven't watched the full video yet?
@rogboak2 ай бұрын
Good job on the table! Question though. When finishing your welds after fit up and tacking, why don’t you run a bead on anything as opposed to just lots of tacks? Great job otherwise!
@VuVT-Workshop2 ай бұрын
Thanks. Because I'm just a DIYer, not a professional welder :D
@ruizvial8 ай бұрын
que espesor tiene la plancha?
@VuVT-Workshop8 ай бұрын
12mm thick table top plate
@ruizvial8 ай бұрын
Pense que todas las mesas de trabajo de soldadura profesional, eran de 16mm, pero noto que no es necesario, averiguando mas, las mesas de buildpro 5/8 son tambien de 12mm. Eso no solo alivia mi presupuesto, si no que puedo hacerla con los herramientas que tengo, Gracias, buen trabajo tu video es una gran fuente de ideas para este tipo de mesas de trabajo en el taller. @@VuVT-Workshop
@VuVT-Workshop8 ай бұрын
@@ruizvial Yes, I am DIY, and I am also very interested in saving costs, so I chose 12mm thickness. Thank you for your interest in this table
@nhatanvlog36014 ай бұрын
kẹp bàn đó mua ở đâu vậy bạn .
@VuVT-Workshop4 ай бұрын
B tìm cảo F là ra, cũ mới đều có bán
@phutran88995 ай бұрын
Hi Ad. phần sắt làm ray nới rộng bàn hàn là sắt hộp và V mấy vậy. Thanks
@VuVT-Workshop4 ай бұрын
Hộp 30x30. V là mình cắt laser sắt tấm ra rồi chấn vuông góc thì mới ôm vừa sắt vuông 30 được B
@phutran88994 ай бұрын
@@VuVT-Workshop cám ơn Ad.
@phutran88993 ай бұрын
@@VuVT-Workshopmình có thể đặt mua từ bạn 4 cây V chân được không
@VuVT-Workshop3 ай бұрын
@@phutran8899 ok, inbox facebook trong mô tả nhé
@Precivilization Жыл бұрын
Very nice!
@VuVT-Workshop Жыл бұрын
Thanks Bro
@trieuphuongcdk892bg4 ай бұрын
Tổng thiệt hại hết bao nhiêu vậy bác
@VuVT-Workshop4 ай бұрын
gần 20 củ b
@lephihung6091 Жыл бұрын
Kk. Em đoán đúng rồi: làm clamp :))
@VuVT-Workshop Жыл бұрын
Cao thủ 👍
@bogdanznak19905 ай бұрын
Vot stail is this?
@VuVT-Workshop5 ай бұрын
I do not understand
@SergeiPetrov10 ай бұрын
And where did these perforated metal plates come from?
@VuVT-Workshop10 ай бұрын
laser CNC cutting machine 🙂
@michaelchristian82202 ай бұрын
There's a couple people that are certified welders here. I feel like most of us that watch this aren't worthy of even attempting to weld anything. We should probably all just give up on life, switch sexual preferences, and start stealing catalytic convertors. 😂 Dude this is a great little fab table. You can get by with a lot simpler, but a table like that sure is easier and less frustrating to work on. Congrats
@VuVT-Workshop2 ай бұрын
Thanks Bro!
@motiontvufop131920 күн бұрын
buying link is broken
@VuVT-Workshop20 күн бұрын
Please contact me using facebook in the description
@user-db4wy2ij7l5 ай бұрын
Всё надо отдельно держать он стола потому что калины от сварки и болгарки будут падать на них
@VuVT-Workshop5 ай бұрын
Ok Bro!
@dragons_den96906 ай бұрын
share the plan plss
@VuVT-Workshop6 ай бұрын
Sr, I don't have a plan. This is a project I did for myself. If you want to know the size, I can measure it for you
@dwaynelejeune35086 ай бұрын
I would not set the spray can on bottom end of cart!!! Your asking for an explosion when a piece of HOT slag fall on it, not IF WHEN cause it will happen!!! 💥
@VuVT-Workshop6 ай бұрын
OK thanks. I will fix it
@user-1922 күн бұрын
А покрасить ?
@VuVT-Workshop22 күн бұрын
Of course. Painting is necessary
@d1v1s1onby010 күн бұрын
Sorry, this item and shop are currently unavailable - thats a shame 😞
@VuVT-Workshop10 күн бұрын
You can contact me by facebook
@Kozak4504 ай бұрын
just buy claps.
@protator7 ай бұрын
now all you need to do is learn how to weld
@moogle91685 ай бұрын
I don't know anything about welding, what did he do wrong?
@protator5 ай бұрын
@@moogle9168 You know, I almost fell for it. Bad troll, go away and watch more fabrication videos.
@Lwimmermastermetalart3 ай бұрын
One of the best welding table designs I’ve seen on here. Working on one myself and I do believe I’ll incorporate some of your ideas.
@agnosticevolutionist35673 ай бұрын
Hahahahahahaha
@mattivirta7 ай бұрын
screwdriver have totally shit, need buy new all set. bahco screwdriver have lifetime warranty can pic up free if go broken.
@VuVT-Workshop7 ай бұрын
Ok thanks
@jackskalski36993 ай бұрын
Watching from a perspective of a person who wants to build one myself... the video doesn't show any of the interesting parts. So making of accurate holes in the plates + positioning the places precisely + in-depth leveling setup. The rest is not that important. In other words didn't see anything of value to me.
@VuVT-Workshop3 ай бұрын
What I'm doing is sharing that idea. What you need to do is equip yourself with knowledge. You think that creating plates is extremely difficult. That's because your knowledge is not enough. Using CNC laser cutting technology, you can cut anything to the desired size. In the comments section, people also politely asked me the size of the plates and I also shared them. If you asked me politely, I would be willing to share, but you don't know how to do that, which is sad. Or if you have search skills, you can search on company websites. Finally, you should remember that each person has different needs