Building My Dream Welding Table! DIY

Рет қаралды 268,843

3 ай бұрын

Dream welding table build! #welding #weldingtable #hobart #evolution #evolutionsaw
Below are affiliate links
My big Evolution saw: amzn.to/4bubq89
Evolution circular saw: amzn.to/3UDAVOj
Receive hitch tubes: amzn.to/42Ae2NN
Heavy duty caster wheels: amzn.to/3OEjbOX
Our new merchandise: the-kelleys-country-life.mysh...
New review channel: / @thekelleysreviews
Our Patreon / tkcl
New podcast channel: / @thekelleysoffscript
This is our Amazon store with affiliate links to the products we use on the channel. It doesn't cost you anymore and it helps support the channel, THANKS!
amzn.to/3RO2z8n
View our other channel for outdoor related content such as fishing, boating and hunting! / @tkoutdoors
Paypal is the same email address below
For business inquires please contact us at kelleyscountry@gmail.com
The Kelley's Country Life LLC accepts no responsibility for you trying anything you see on our channel.
All links provided above may be affiliate links which earn us a small commission but don't cost you any extra.
I am a part 107 certified drone operator, any drone imagery you see is legal and my own.
Our address
6244 East Caps
PO Box 22
Lamont, FL 32336

Пікірлер: 473

@ScottieBMan 3 ай бұрын

Well thought out!

@223rocks 3 ай бұрын

Well done

@williamlong9561 3 ай бұрын

What a great table

@raylares 3 ай бұрын

Awesome table. You did a great job.

@crisvega7588 3 ай бұрын

Metal working table and lunch table all in one. Awesome

@UsamaArshad-mi3dm 2 ай бұрын

really appreciatable, awesome feature aa according to the needs of welders.

@georgesherman5345 3 ай бұрын

Very well thought out and tons of great features!

@TKCL 3 ай бұрын

Thank you for watching

@LetsRogerThat Ай бұрын

Built the exact same table a few years back. It transformed my shop into an amazing place to work

@prow6586 3 ай бұрын

Lots of great ideas and techniques. Thanks for sharing.

@TKCL 3 ай бұрын

Thanks for watching!

@astikennel 3 ай бұрын

This is incredible and so very much You Andrew!

@TKCL 3 ай бұрын

Thank you

@SuperBroop 3 ай бұрын

Wow! Nice work!!

@TKCL 3 ай бұрын

Thanks!

@StillOnSteel Ай бұрын

Wow! Great job!

@TKCL Ай бұрын

Thank you!

@sharonmilton4854 3 ай бұрын

Looks great!

@TKCL 3 ай бұрын

Thanks

@RaidersRoom 3 ай бұрын

On the 4in extension, I'd cut a slot hole. Bolt them together just slightly loose. Should give enough L-R slop to enable you to pull it out as one piece again

@StoicRipple 3 ай бұрын

Thanks for the inspiration! I’ve been picking up ideas from here and there but this one takes the cake…now I know how I want to put my table together.

@TKCL 3 ай бұрын

Glad you enjoyed it

@kevinmorace6117 Ай бұрын

Awesome!! Thanks for sharing.. saved to my library for future

@TKCL Ай бұрын

Thank you for watching

@Alden-zq1nu 4 күн бұрын

Good job. Some great features there. 👍

@TKCL 4 күн бұрын

Thanks

@robertrussom8052 3 ай бұрын

Fantastic video. Great ideas. Thanks for sharing

@TKCL 3 ай бұрын

Thanks for watching!

@griffin4261 Күн бұрын

Brilliant ideas watching your video gave me a solution for my table. Nicely done.

@TKCL Күн бұрын

Glad it helped

@freezemanrjbr 3 ай бұрын

I loved the solutions you find.

@TKCL 3 ай бұрын

Thank you for watching

@TBizzell68 3 ай бұрын

I don’t know, it looks pretty flimsy…..😂. All kidding aside I think it turned out great! I’ll be stealing some of these ideas if I ever get around to building my own.

@jake-mv5oi 3 ай бұрын

Nice work. Looks well thought out.

@TKCL 3 ай бұрын

Thanks!

@HalfPint75 3 ай бұрын

Love the thought process! Looks great! 💪

@TKCL 3 ай бұрын

Thank you

@waynegrieco9752 3 ай бұрын

Great Design. All the Best using it.

@TKCL 3 ай бұрын

Thank you

@geraldbullardjr 2 ай бұрын

Great Build :) Thanks!

@TKCL 2 ай бұрын

Glad you like it!

@richardshumate7257 3 ай бұрын

Great idea

@TKCL 3 ай бұрын

Thank you! 😊

@outsidewithrodney8240 3 ай бұрын

That's a awesome table!!! You did a great job!!!!

@TKCL 3 ай бұрын

Thank you very much

@scottdeeslcutusa8117 2 ай бұрын

Thanks for recording this project

@TKCL 2 ай бұрын

Thank you for watching

@jessebaires2903 3 ай бұрын

Dang bro! U thought of everything. Been watching a lot of table builds for ideas. This one is the best. Gonna use a lot of these features. Thanks!

@TKCL 3 ай бұрын

Thank you for watching, glad it was helpful. More add ons coming!

@dreamtec4326 3 ай бұрын

Wow, what the exelent

@Suzwebb1 3 ай бұрын

A lot of thought went into this build. Looks like many years of enjoyable use!

@TKCL 3 ай бұрын

I sure hope so

@scottpaulson1714 3 ай бұрын

Nice table and well thought out.

@TKCL 3 ай бұрын

Thank you

@valterp528 3 ай бұрын

great work

@TKCL 3 ай бұрын

Thanks!

@KimbaTheKre8or 3 ай бұрын

Awesome….just awesome…..another great project! Thank you for sharing! Happy Birthday!!!🎉

@TKCL 3 ай бұрын

Thanks so much! 😊

@doon44 Ай бұрын

What a great build! Cant wait to get started on mine.

@TKCL Ай бұрын

Thank you for watching

@qfam100 3 ай бұрын

Nicely done!

@TKCL 3 ай бұрын

Thanks!

@tjt1992 3 ай бұрын

Awesome table!

@TKCL 3 ай бұрын

Thanks

@josephvance9759 3 ай бұрын

OK - I have been watching you for awhile - and have always been impressed by your mechanical skills and the way you think through projects - but this is a WHOLE other level! Great job!

@TKCL 3 ай бұрын

Thank you for watching and the support

@treepop1550 3 ай бұрын

Very impressive indeed !!!!

@TKCL 3 ай бұрын

Thank you for watching

@jamesgeddes797 3 ай бұрын

Fantastic tabke, Nice job!

@TKCL 3 ай бұрын

Thank you

@dougdavis4439 3 ай бұрын

Tons of utility thought out on your new welding table, Andrew. I wouldn't have imagined any less. I'm excited to see it in use soon!

@TKCL 3 ай бұрын

Thank you sir! It's going to be a blessing.

@Overpar73 3 ай бұрын

Happy birthday to you! I really enjoyed watching you build this table, very, very nice!

@TKCL 3 ай бұрын

Thank you very much!

@dalemciver7118 3 ай бұрын

NICE JOB 👍👍

@TKCL 3 ай бұрын

Thank you

@franciscovillegas-ip9lz Ай бұрын

You did a great job. Nice ideas. I really appreciate the round seat. Sometimes we need time to think or just rest.

@TKCL Ай бұрын

Thank you for watching!

@bigwavefla161 3 ай бұрын

Great job Andrew. You really thought this one out. Not only is it a killer design, you cleared up some space in your shop with the extra storage space. You will now know exactly where your welding supplies and tools are in that beast. Awesome content once again!!!!!

@TKCL 3 ай бұрын

That's exactly right, and I also have a big Shop clean out and storage solution planned. That'll be a future video to get a lot more of my working room back and get more organized.

@jaimelago8941 3 ай бұрын

Very nice table I'd liked too much

@bzer1 2 ай бұрын

Excellent design

@TKCL 2 ай бұрын

Glad you like it

@troyweatherford9874 3 ай бұрын

Excellent job

@TKCL 3 ай бұрын

Thank you very much!

@frankdiaz7571 3 ай бұрын

Good work

@TKCL 3 ай бұрын

Thanks

@dwyanejetersr6470 3 ай бұрын

What a pleasure to watch your expertiese, like it. outstanding work.

@TKCL 3 ай бұрын

Thank you for watching

@PJ-uv9fr 3 ай бұрын

🎂HAPPY BIRTHDAY🎂....that's one helluva birthday present you built yourself! I love the addons and the versatility, not to mention freeing up valuable work or storage space in the shop. Excellent job as always "young man"!👍👍👍👍

@TKCL 3 ай бұрын

Thank you so much 🤗

@reptile9862 2 ай бұрын

Thought out and well done sir!

@TKCL 2 ай бұрын

Thank you for watching!

@TKCL 2 ай бұрын

Thanks for watching

@onionhead5780 3 ай бұрын

Very nice.

@TKCL 3 ай бұрын

Thank you

@user-bz6ej1fb9k 6 күн бұрын

Отличный слесарный стол получился. Респект Мастеру.

@mikerichard-FOPA3 3 ай бұрын

Andrew Happy Birthday! Awesome welding table you’ll get lots of use out of it. Add more seats and you will have a picnic table.

@TKCL 3 ай бұрын

Thank you sir

@rafaelherrera8985 Ай бұрын

Nice 👍

@earlcavenaugh6459 3 ай бұрын

Great table Andrew! Nicely done!

@TKCL 3 ай бұрын

Thanks!

@charleyklein8494 3 ай бұрын

Nice table! The only thing I would add is angle iron on the edge of one side of the table to hold round stock when welding!

@Hal-wk3ks 3 ай бұрын

Happy Birthday Andrew. Awesome table

@TKCL 3 ай бұрын

Thank you

@justinvanburen8259 3 ай бұрын

That’s an awesome table!!! I love it!!! I need to build one myself!!

@TKCL 3 ай бұрын

Thanks, I love it!

@petermccuskey1832 3 ай бұрын

Really like your design.

@TKCL 3 ай бұрын

Thank you!

@jessegregory4428 Ай бұрын

May have to copy this! Thanks for the video

@TKCL Ай бұрын

Go for it!

@southtexasff Ай бұрын

I just recycled on old frame that was in an oil field yard, think it was used for some sort of storage, it’s a 3’x5’ frame built out of 2 3/8s drill stem, I’m planning on putting a 3/8” plate on top, I’m trying to come up with a way of putting my chest type tool box that’s about 2’ tall at the bottom but make some sort of slide out to be able to keep it out of the way, was thinking of bolting some angle iron on it and welding some c-channel to the frame to be able to let it slide in and out

@rongray4847 3 ай бұрын

Nice job on the Welding table Andrew. That’s something you will get a lot of use out of. Looks really good and solid. 👍👍❤️❤️🇨🇦

@TKCL 3 ай бұрын

Thanks 👍

@ryanzynda5114 3 ай бұрын

Awesome welding table. That will really come in handy for you 😊

@TKCL 3 ай бұрын

Definitely!

@joemizer 3 ай бұрын

Very nice table.

@TKCL 3 ай бұрын

Thank you!

@jeremiahs45 3 ай бұрын

Sure is an awesome table Andrew. I thought about adding a sheet metal top to my workbench but it is expensive like you said

@RobertKohut 3 ай бұрын

Impressive well thought out design!! Again, ...great job!! 🙂

@TKCL 3 ай бұрын

Thank you very much!

@lovejcdc Ай бұрын

Dude that is a seriously awesome table you built. I love the awesome slider bar idea for the grinding consumables. Excellent job man and God bless y'all

@TKCL Ай бұрын

Thanks a bunch! God bless

@allanj4576 2 ай бұрын

Nice bench, I built one very similar but I wish I has used expanded metal on the bottom shelf like you did. I saw a cool hack on KZfaq for the bench grinder, guy mounted it on a hinge, so when not in use it swings down under the edge of the bench. I also put a power bar on mine under the edge.

@JH-zy1dj 2 ай бұрын

Boss table man! I really like all the square tube cross braces to keep the deck flat. Clearly well thought out. I weld and fab for fun so I understand how bad ass this thing is. Keep on trucking.

@TKCL 2 ай бұрын

Thank you

@user-gz6fn2yx9f 3 ай бұрын

Drill 3/4 holes in the top so you can use the Fireball Tool Fixtures.

@Stefanos.Tsokaras 2 ай бұрын

Very nice work!

@TKCL 2 ай бұрын

Thank you

@rudymagarin6292 9 күн бұрын

BUEN TRABAJO MUY BONITA LA MES GRACIAS SALUDOS DESDE EL SALVADOR

@Neudezign 3 ай бұрын

Dude, excellent work, really cool design, great craftsmanship too. Looking forward to seeing how this progresses and the projects you build off of it. Appreciate ya sharing 👍

@TKCL 3 ай бұрын

Thank you, new project video drops today.

@bokfuman 3 ай бұрын

Very well thought out welding table design, I really like some of the features that I have seen on other KZfaqr videos. Great job, I can see you will put this table to good use.

@TKCL 3 ай бұрын

Thank you very much!

@krekautofunilaria8730 3 ай бұрын

Top ótimo trabalho 😮😮

@bakednoodle2732 3 ай бұрын

Just want to add my sentiment of such an awesome welding table.

@TKCL 3 ай бұрын

Thank you so much

@2chipped 3 ай бұрын

Great job! An option for extra tools,is to use a magnetic base on that aircraft carrier !

@zx-xv3uj 11 күн бұрын

muy buen trabajo

@joebufford2972 3 ай бұрын

Awesome table Andrew!🎉 And happy birthday!

@TKCL 3 ай бұрын

Thanks so much!

@AndyDufresne4 Ай бұрын

13:20 VERY good idea. So simple and I never thought of it before.

@TKCL Ай бұрын

Thank you for watching

@ns_racing Ай бұрын

That Vevor magnetic drill seems to work very well! Great table build btw absolutely love the design good job!

@TKCL Ай бұрын

Thank you very much!

@leeknight9063 2 ай бұрын

awesome table

@TKCL 2 ай бұрын

Thanks!

@user-ld3ir4qq9r 26 күн бұрын

Awesome table

@TKCL 25 күн бұрын

Thanks!

@lennyross2813 3 ай бұрын

Nice! When I made mine I welded scrap 1.5 inch tubing to legs to hold my welding torch, plasma torch etc. also at the end I welded in a grate for plasma cutting. It has a tray underneath to catch debris.

@TKCL 3 ай бұрын

Going to build a few more of these things, I especially want a spark shield on the slide out when cutting.

@Lwimmermastermetalart 3 ай бұрын

Great table! Glad to see you have the evolution saw. I go crazy watching guys use angle grinders and hack saws to build stuff. Well done sir.

@TKCL 3 ай бұрын

Just bought that saw and absolutely love it.

@Lwimmermastermetalart 3 ай бұрын

@@TKCL yes for the money it can’t be beat! I’m an old toolmaker for like 50 years. Owned my own shop for 48 of them lol. I had an expensive cold saw and we cut many a piece to tight tolerances and good finishes. This isn’t quite as accurate ( nor expensive 😜)but for fab work it’s fantastic. Here’s a little tip you may find helpful. I mounted a rod of steel to the right hand side for a stop. I made a block that you could rotate down when using. Put an Allen head SHCS in for fine adjustment. Then I use a small piece of one inch tube when setting to make a space in between. Then I remove it allowing room for the piece to fall off without pinching. Hope you find that useful. You made a great table utilizing all that space. I’m curious are you planing on renting a mag drill and putting in .625 holes for clamps? I made mine using 6 in wide plates with 1 inch spacer plates. I can remove and put clamps in that reach every spot easily. My plates have an adjustable mounting so I can tweak them in for flatness to each other. I would have liked to get the plates Blanchard ground but there’s no place anywhere close to me. But I’m simply a hobby shop in my retirement anyway. Sorry I get so lengthy 😂 I’m also a novelist.

@williampoff2537 2 ай бұрын

I built one a few years back like that. Very nice to have. Two things i did different was I used 2' pipe on the seat so it swivels from side to side and then under the table for those jobs its in the way and then second I wired the whole table with plugs on every corner. Then all you have to do is plug a fixed cord that made into a junction box on the table and then everything has power. Love your work and the details are awesome.

@TKCL 2 ай бұрын

Thanks

@imondo9167 3 ай бұрын

Love it…!! That’s Mericaaaa Ingenuity

@matthewpeterson3329 Ай бұрын

Very nice job. I did a few things a bit differently, but your table has some very cool features. I started with seats like you made, but found them to be knee busters, so I converted them to swing away style on pintles. I really like your table extension. Well done, sir!

@TKCL Ай бұрын

Right on

@Tripring2000 3 ай бұрын

You’re going to have to eventually get a Fireball Hardtail Vice to go on that awesome welding table. That is fantastic table you have built. Love the extension fence.

@TKCL 3 ай бұрын

That would be cool! I need some of their squares as well.

@louisarmstrong8863 3 ай бұрын

When you sat on that extension I was going to laugh IF it lifted and if it did I would say to many barbeques! well done

@stuartkorte1642 3 ай бұрын

Very nice. Like the disc storage. Haven’t seen that solution. Smart. Having been there, done that, I highly recommend putting a 6 socket power strip on the table with a very short cord. I often have 3 of my 4” side grinders in use on the same project. I placed it on the side of my domain hand. Then use cord reel to power. Another new feature I did was add the 5/8 fixture holes in a 36”x36” area. So much better being able to clamp anywhere. The last bench I relied on the edge which worked but always needed to clamp perpendicular also.

@TKCL 3 ай бұрын

Power strip is a good idea! Thanks

@michaelstreet139 3 ай бұрын

Excellent job Andrew!! You have created a masterpiece of a welding table!! The features on this just blow me away!! Strong work Brother! Happy 20/20 Birthday!!

@TKCL 3 ай бұрын

Thank you very much!

@joshohoro 3 ай бұрын

happy birthday and i’m jealous of the table!

@TKCL 3 ай бұрын

Thank you for watching

@chrisfinney1905 3 ай бұрын

Lordy Lordy Look Who's Forty!! Lol Happy Birthday Young Man!!🎉🎉 I sure like that wielding table, Great workmanship.

@TKCL 3 ай бұрын

Thanks!

@taylorknoblock8254 2 ай бұрын

The table looks great. I recently did something similar to hole grinder discs on threaded rod but found another nice touch is to use 1/2” metal conduit and pinch that with a 1/4” washer and nut and it makes sliding on the discs and other things nice and smooth

@TKCL 2 ай бұрын

Thanks for the tips!