Where do you work, I need a job

@@lilblickyboyz5364 Im a union Biolermaker out of Tampa .I met her while building parts for the U.S.S Washington . Season starts in a month call up your local union and schedule a test 👍

@@thecat1919 how much do bookmakers make, cuz right now I'm struggling. And I got 4 years of high school welding experience and 1 years building welding on trailers but since the place shut down, I've been out of work

@@lilblickyboyz5364 Aprentices start out at around 20 an hour and up . 12 $ an hour for pension 7 $ an hour for health / welfare . and 2 $ an hour for anunity. The numbers very . total package is about 41 $ an hour .just to start . Tube welders and foremans make past 100k a yr take home pay . most Boilermakers have 1/2 mill in they pension right now .

She said women are better at it (kzfaq.info/get/bejne/pNt1fcJlr7yUgJs.html). Is that true?

Patience and hood time make sure you put that in and you will be better than most of those guys if not all. Don't let them talk you down.

@@Floppywaffle459 we need more men like you.

😀❤️

@Jasmin Hartman how do you like welding? im 18 looking to start doing it

@Jasmin Hartman you think I could one day own a ranch if I work as a welder. Yk just like a 50 acre ranch, for like 3 horses and chickens, and some other animals. With a house

Hi Nik I am good welder and contractor.can u join my business

Go too union better than school

Which trade did you go for?

In this day and age, I can't believe people would think anything is only for one gender. Anyone can do the work. The real question is: "Do you want to be around men all day every day?" It's the same for male nurses: "Are you ok with most (or all) of your co-workers being women?" Frankly, in my experience men get along better in the workplace than women do.

It's my dream.

Do it it's a real good skill.

how much ?

Some shops say $15-&19. But there is machine & welders making $22-$33 at that shop. Do t get discouraged guys. & gals

@@demonicpresence3765 $26

@@shaneintegra that’s what I’m trying to do any advice when I get out of welding school?

How’s it going rn?

How its going? I go next month

How did it go!?

Wish you good luck 🎉

Hello, question… how is your eyesight? That’s my only concern about getting into the field.

@@Jesussaveme85 use at least a #10 lense to weld stick and yo can do it for years. I only use glasses for reading and am 69......Good luck

@@hsmith3844 that’s not bad at all. Thank you for letting me know. Blessings 🙏🏽

how did your welding school go? or how is it going?

I took a class in 2005. Learned to use an acetylene torch and stick welder. Where I worked , in a truck shop, they welded some sort of assembly together that was like a 1/2" tube within a bracket about 2 inches wide. Weld the tube to the bracket. I was too shaky making the welds. Maybe the welder wasn't on the right settings or something.

Yes at that school they only do one day class other 4 days are hands on

Yes if it’s through a union classes are decent but working in the actual field with the journey man you’ll learn more

Do what you want to do. Do not limit yourself, you got this.👍

@@justinharris6057 Thank you! Since I commented this I did a lot more research, got my family's support, and scheduled a tour at my local vocational school. If all goes well I will be starting welding class in September!

Jesus christ, no offense but why does welding attract people with no current direction in life. We need skilled tradesmen not people who were just flipping burgers. Although good on you on going to school for it. IMO all skilled welders should have to get an associates degree for it.

Sam how do you expect people to become skilled tradesman? School, that’s how. I’m putting in the fucking time, I’m determined, and no I’m not some loser with no direction who was just flipping burgers. I was searching for what was right for me and I found it. So I couldn’t really care less what you have to say

@@_fantomas Clearly you do care, as you just typed out a paragraph to prove something to me. But I respect that you're going to school. There is a lazy crowd of people who think grabbing a little certificate for welding and then becoming a welder is their easy ticket to wealth. They tend not to do well in this industry anyway.

Where u live at

Once saw a bumper sticker that read "welders can fill any crack" ...

That’s when I knew she was talking shit

Google pipe fitters steam fitters and plumbers in your area start your apprenticeship and get paid to learn May take four to five yrs. to get your journey mans card. Totally worth it.

BOILERMAKERS 🇺🇲🇺🇸💥💥💥💥weld on

@@michaelchadwick3497 do they stay busy working though ?

@@patriotskingnation8084 I did ,but I have been retired for seven yrs. pipe fitters and electrical unions have adds on TV in my area (Tn.) . Starting job pays 40.00$ an hour .

@@michaelchadwick3497 for sure cause I hear some apprentices be getting laid for 6 months

So you just work for contractors? Jumping from job to job ?

I’m thinking about going into welding or an auto tech don’t know which one yet

Stfu

ur not 4 years old ur there for a reason. use ur time and WORK thats what schools for. not to slack off. ur not there paying money to jerk off

Call the school. There is also aids and Grant's available for people.

Go to a communitt college that teaches welding and manufacturing. You'll pay 40+ thousand dollars at Tulsa welding compared to 2500 -5000 at a community college

Thomas Delgado that’s what I plan on.

@@fbi805 more like 15k for Tulsa not 40k

Littleton well it’s a good paying job and people enjoy it

She is a pipe welder

No. I got a crap job right after graduation, even being in the top 10. A year later though, landed a scale paying job for 32/hr. Recently I have a job paying 27/hr. But I graduated from there I think around 2010. If you go there, try the Boilermakers union. The Ironworkers union there is crap!!!

Start small then. If you can save enough money to buy a cheap welder to practice and give you the idea if you like it or not for sure do it. If not go to a weld shop and apply for a job, be honest on your resume, a good employer will help you out

I hear $16. I think they are exaggerating in this video, it's a promo for their school

Those checks average from 2500 to 4000 a week on the road welding pipe and or boiler tubes.

me too but im also thiking about goin g into welding

Only thing intimidating me about welding is setting up the machine. I'm very slow on math too but I'm not letting it stop me from welding.

You don’t use math in welding. You let your fitter handle all that

California sucks. I have my associates in welding and the pay barely reaches 20 an hour here. Have to go where the work is, and it's not here.

Don't let welding instructor pump you up $30/ hour. 99.9% the companies hiring managers will find someone with lesser and cheap wage people within a week. it's more likely paying $14 - 18 first year with the LA certification or AWS. 5 year experience, knows how to fabricate and complete a project than $22 - 25.. Remember someone out there willing to work much cheaper than you and your manager will replace you over cheap labor 😉

@@Amp661 like that in Texas also. I was trippin when she says 30 fresh outta school.

Bryan G Sanchez From what ive been told they can give you a list after you graduate and call them. They can give you all of the welding jobs around you. Plus welding is everywhere.

Sexy Bear oh okay thanks helps a lot I really want to make something of myself

The first welding job I applied to they offer me a job. I failed their weld test but they still took me in. I went to a community college

explore now how much are you making an hour?

No brother i was started in my 26

@@bikramlimbu6534 how long did you go to school to become one?

@@BobbieDraper neither i took any formal wedding classes nor went to school. I just join in company as worker then my journey has begun working and learning same time

I mean they do care

All the teachers care bro, if do put your effort and time. you’ll be great

Hey man just look up welding schools in your area weather it be through a community college or just a welding program like Tulsa

Tulsa welding school has 3 different locations like Jacksonville Florida, Tulsa Oklahoma, and Hurston Texas

Yea im in a welding college rn. I found one in the valley

Per diem is money your employer gives you for food and necessities through out your week. Mainly out of town jobs give per diem.

Brandon Cloud oh thanks

It used to be non taxable also

That’s not what the statistics are showing. You can’t 3D print giant nuclear subs. Which is what I am currently welding on.... the boomers are retiring and the new and up and comers will be in more high demand than ever!

@@hannacastMAKEUP you cant print a sub...now. in 10 years you can., in 20 it becomes cost effective...in 30 its standard.....its inevitable

@@ogmius2001 We will see. In 10 years I doubt they will have changed the system that fast....Considering the percentage. With a 3 percent markup from 2019 to 2029. All I’m seeing are upticks and higher demand for welders. The numbers don’t lie.

@@hannacastMAKEUP ignore numbers, use your eyes. a printer will never call in sick, whine about overtime or the lack of, doesnt need health insurance or osha regulations. the DOD is investing BIG TIME in 3d printing....the only thing holding it back was creating high tensile models...a boundary that was crossed just like 2 years ago and its already being put into application. Im old, I've got 30 years in already, so this revaluation of the industry will not affect me, but the young could get seriously hurt later in life being replaced by a robot

@@ogmius2001 I get what your saying I do. But I like to stick to the numbers, there are just some things a printer can’t do. Which is why they will never completely rely on machine. The other question is can these machines be expensive? So cost? And the other question is are they going to be faster then men on a job? More efficient? Without breaking down or needing parts.