WellHose system worked great! Spent about four hours removing 100 feet of rusty galvanized pipe and the new WellHose was installed in minutes with two people. You will need to be mindful of not over tightening the straps that secure the power cord so that the cord can slide freely, otherwise you'll have to remove the pump like I did to adjust the straps. But even so the removal was pretty simple and took less than 10 minutes. I recommend use of the casing roller that you can purchase at WellHose, it makes installation and removal much easier and ensure the hose remains protected. WellHose provided great customer service to make sure I had the right accessories to make the installation go smooth.

This is a great product! I installed 98 feet with a 3hp three phase pump motor by hand. Just myself and 2 budies to help feed me the hose and wire. It's really as easy as the video shows. I lowered a GoPro down the the case after to see what it all looked like. Perfect, no surprises. No torque or twisting issues to worry about. I've run the pump for weeks on end now and all is well. I could pull the pump, change any worn parts and reinstall it in less than an hour I needed. And never have to call the expensive well service company. It's really a no brainers.

This hose worked great! I installed it in my well in about 10 minutes and it was inside a building. Customer service is great as well.

Took a gamble in 2021 when my 1hp pump died. After pulling the pump with 110' of 1.25" hd pvc screw pipe with extremely corroded stainless couplings that had been in the well for over 15 years, I decided that there had to be a better way. In my research, I found WellHose. Easiest well install I have ever had and I did it without any help at the age of 72. I am currently having pump issue again so out she comes. Never dreamed it could be so easy again by myself and 74 years old. There is no way I could have done it if it was installed with hd pvc. I would have had to hire somebody to pull the well which I have never done in my life! Absolutely worth the gamble, physical wise as well as financial wise!

WellHose was easy to install and will make future maintenance a breeze. Customer service with helpful and shipping was fast!

I’ve now bought WellHose for 4 different wells at our nursery, home and for a commercial property. At first it seemed a little pricey compared to PVC & galvanized pipe. And those were the materials existing in our various wells. But once I considered the cost of having our local well driller come and pull pumps from even our relatively shallow wells of 60’-90’, it became clear very quickly that WellHose costs far less than paying the driller to pull pumps hanging on rigid pipe. And let me tell you, pulling 80’ of 2” PVC pipe partially filled with water and a 70lb. pump at the bottom is no small task. I’ve done it! Even 1” PVC pipe out of a well is a challenge without a bunch of tools, machines and helpers. Add that to the possibility of dropping slippery PVC pipe or incredibly heavy Galvanized pipe back into the well, which I almost did last week, and it makes WellHose (which is kind of impossible to “lose” down a well) a super-easy-choice. The long and short of it is that WellHose is incredibly easy to work with, is light, is incredibly strong (watch the videos by BeeCaveDrilling), has really significant fittings and clamps, absorbs a significant part of water-hammer effect, is designed in a way that allows easy attachment of the electric pump wires and has basically made it possible that we can easily pull pumps if and when we have problems in a well. And unfortunately we’ve had to do this several times in the last month. Remember, I have a nursery and four wells on 3 properties. Add that to the fact that there are relatively inexpensive but well-built pumps out there and it means that instead of paying a well driller $3000 for a pump and another $750 or $1000 just to show up on my property, I can pull the pump myself and put things right. For someone who likes having a sense of agency around my water supply, finding WellHose has changed everything.

Great Product and was easy to install. 200 ft of hose no problems. Order was complete and on time.

The best system ever. i did it myaelf and replace my own well hose

Just installed a WellHose in Wisconsin using a pitless adapter. It went very well the pump was set at about 60’ and I was able to pull and install by hand even after the hose is filled with water. If I have to set another pump I will be coming back for another WellHose. (By the way I’m a pretty small guy at about 150 pounds soaking wet)

We just dropped our well pump yesterday. 180 foot, we atrached a cable to pump fir extra security (didn’t want to risk going fishing fir pump if we dropped it). Lowered it down using the the casing roller. All worked great. We did have to accommodate the roller to fit with the well head seal as ours is a domestic well. The only issue we had was tying the straps. I'm a bit obsessive to making exact, and we had a flat ribbon type electric cable.

Very interesting what abut torque? I see you have a centering item, but what about torque how do you keep it from twisting into a spiral and cutting off water flow or slowing it down?

It seems like an awesome way to set your well pump however I’d like to see how it’s pulled when full of water since most small pumps have a check valve in the bottom making everything heavier. I typically use poly pipe for my wells and would be would be interested to see a video comparing this new style hose to poly

I'm in Michigan, how about using this with a pitless adapter? Will it work?

I would like to see a video of puling the pump when the hose is filled with water. How do you do that?

I have a question? lets say my well is getting tree roots merging around well casing, how would this product withstand getting ripped or punctured, when retrieving the pump?

I ordered wellhose for 4 wells. The customer service was excellent and they went above and beyond to get me my order in the time frame I needed. I will comment again after the installation and let you know how the product was, but so far I've been very happy with the customer service.

How would you install a "Torque Arrestor" ?

Hie pal, I'm in south afrika where may I find this wellhose and the cost involved to have a complete set . Thank you in advance Drilled a 55metre well, water gushing out by itself always year round. Wat do u recommend 1. Pump size (HP?) 2.well hose pipe size? 3.any valuable information Pal

What type of plastic is this made from? Does it leech any chemicals?

For that price I am good with pvc. Someone wants to get rich fast.

$708 for 140' of well depth for 1.25" is too expensive for me. If it were 50% of that then ok maybe.

I would not do this in the dirt.