Wera Zyklop Pocket : First Impression

Рет қаралды 17,714

Жыл бұрын

Wera has just released a few new tools and as always they look innovative and top notch. I got my hands on one of these new products, the Wera Zyklop Pocket. Check out the video for my first impressions of this new tool from Wera! Thanks to KC Tool for quick and easy shopping and shipping.
#weratoolrebels #handtools #edc
Check out the Wera Zyklop Pocket 8009 here:
www.kctool.com/wera-004283-zy...
Check out my other videos here:
kzfaq.info/sun/PLT...
Check out my Instagram:
/ garnerfamilyhomesllc
Check out my Rumble Channel:
rumble.com/c/c-1278664
Check out my Odysee Channel:
odysee.com/@garnerreviews:91c...

Пікірлер: 44

@mattro4902 Жыл бұрын

I enjoyed the video. And the audio was spot on from my side.

@garnerreviews Жыл бұрын

Glad to hear it. I will be improving my video and audio in the future. 👍🏻 Thanks for watching

@ScottenJonesVideo Жыл бұрын

I have the ratchet, it is pretty cool but I wish you could lock it as well as ratcheting left or right. When you use it as a screwdriver locking it would be very helpful.

@ScottenJonesVideo Жыл бұрын

I also took out some duplicate bits and put in some flat blade bits, apparently flat blade isn’t used much in Germany.

@garnerreviews Жыл бұрын

You are spot on. I think you and I agree on both accounts. This are things that will definitely be coming up in my future review video.

@chrisfyfe9212 Жыл бұрын

I want to give one a try !

@garnerreviews Жыл бұрын

Wait for my review before you buy. It is a solid tool with room for improvement in my opinion. 👍🏻

@T-Bone-nk1ng Жыл бұрын

I thought about this but am wondering how I will clean out the magnets in a pinch. In both the ratchet and the bit holder.

@garnerreviews Жыл бұрын

It can be tricky. The two magnets on the side of the ratchet are easy (the two responsible for holding the sockets) but the internal one I would imagine will take more work with something like a pick or something. But that is true for most magnetic bit holders. 👍🏻

@chotuusian4127 Жыл бұрын

Nice tool

@garnerreviews Жыл бұрын

It is a nice tool. Couple of improvements could be made but so far I am liking it. 👍🏻

@Hagemann666 Жыл бұрын

Your voice audio is VERY quiet in this video. I had to crank the volume to hear you. Just letting you know. Thanks for the review!

@garnerreviews Жыл бұрын

Thanks, I appreciate that. I will make sure I watch the levels better next time. My goal is to get some better recording equipment once I hit 1000 subs. 👍🏻

@Hagemann666 Жыл бұрын

@@garnerreviews I subscribed so hopefully that helps. :)

@garnerreviews Жыл бұрын

@@Hagemann666 Thank you, it is appreciated. 👍🏻

@gr8momba Жыл бұрын

I bought it for work but I'm thinking twice about using it cause all the metal dust will fill up the bit hole.

@garnerreviews Жыл бұрын

If you work in an environment with a lot of metal shavings in it, I think you are making the right evaluation. 👍🏻

@rjskum688 Жыл бұрын

The absolute only thing that turns me off about this driver is the bits are helf in via magnet. Big chance of the bits sticking on a fastener and possibly getting lost. I've thought about it and only fix is if they used a rapidaptor bit holder and used an adapter for the sockets instead.

@garnerreviews Жыл бұрын

I hear you, one of my concerns with it as well. Stay tuned for my review that should be coming soon, I will talk through the positives and negatives I have found after using it for a bit. 👍🏻

@rjskum688 Жыл бұрын

@@garnerreviews awesome man! Can't wait.

@DanielNHofficial Жыл бұрын

What are them sockets in mm ?????????????????

@realsteam123 Жыл бұрын

8, 10 &13

@garnerreviews Жыл бұрын

Kc Tool sells a metric version that includes the 8mm, 10mm and 13mm. 👍🏻

@fransiscoscaramanga674 Жыл бұрын

very nice video, i enjoyed it, i own a couple of wera pieces and i'm very impressed with the quality. i like the fact that you can carry this on your belt, can come in very handy.... Germans have always made quality tools...

@garnerreviews Жыл бұрын

Thanks for watching. I do enjoy the Wera tools I have currently. Seem to be high quality tools with some clever ideas thrown into the mix as well. Stay tuned for my review video on this tool that should be coming soon. 👍🏻

@commentsonthetube14 Жыл бұрын

Is it compatible with 3/8 socket extensions?

@garnerreviews Жыл бұрын

Yep, it is compatible with 3/8” extensions. They are just held on magnetically like the sockets. 👍🏻 Thanks for watching and the question.

@commentsonthetube14 Жыл бұрын

@@garnerreviews sure, thanks for the response! Does it hold them pretty well? I'm looking at this for my car tool kit so I don't need both a screwdriver and a socket set. I really only need a couple kinds of sockets to change my headlights and batteries and stuff. But one of the nuts needs an extension to reach.

@garnerreviews Жыл бұрын

It holds it decently but obviously has limits. I wouldn’t feel comfortable with more than a three to six inch extension on it. And definitely test it out before relying on it. Honestly for a car kit that focuses more on sockets, you may be happier with one of Wera’s Zyklop ratchets with a few accessories. 👍🏻

@commentsonthetube14 Жыл бұрын

@@garnerreviews Thanks, that's what I settled on! I figured that with the 3/8 zyclop and bit adapter it was basically a screwdriver anyways. Now I just need to put together a bit kit of some sort.

@llanbull Жыл бұрын

I want it but I don't need it lol.

@garnerreviews Жыл бұрын

This is how I feel looking at KC Tools website! 😂 Thanks for watching. 👍🏻

@ooltimu Жыл бұрын

360 / 5 = 72 teeth

@garnerreviews Жыл бұрын

Thanks and thanks for watching! If only I was smart enough to do that in the video! 😂👍🏻

@rjskum688 Жыл бұрын

Bro the intro music made me deaf.

@garnerreviews Жыл бұрын

My apologies, I will make sure to tweak the levels going forward. 👍🏻

@Paine137 5 ай бұрын

Irritating that the ratchet doesn’t lock.

@garnerreviews 5 ай бұрын

Agreed. As time has went on I have grown more discontent with this tool. Maybe a follow up video on it is necessary.

@chrisguy97 Жыл бұрын

I would recommend zooming in I'm sorry but we're here for the tools not your entire shop

@garnerreviews Жыл бұрын

Thanks for the suggestion. Was the camera placement better part way through the video when I was going over the tool close up?

@mylesmccormick Жыл бұрын

@@garnerreviews I agree with the original comment. But when you did the close up part way through, I found it was perfect. Thank you for a great review you have earned yourself a new subscriber!

@garnerreviews Жыл бұрын

Thanks for the kind words and for subscribing. I will keep that in mind in the future and try to do more up close and personal with the tools. 👍🏻