Love your statement "It's a little bit foreign to me, but it's another piece of Iron with nuts and bolts in it, we'll just tear it apart and fix it". Made me chuckle and put a smile on my face. Great video.

Keep em rolling through. Glad to see your kicking ass as usual.

Warren, i admire Your work ethic and moral values. America would be a better place if more people were like You... Thanks for sharing. ... Rick in Wyoming.. 💪

Left us hanging on that Cat story. LoL

I just want to say thank you so much watching your videos gave me so. Much confidence to take my own job replaced the oil. Cooler of my 2005 f350 with a 6.0 was hell but she's good

Love your video's. You always explain things so nice. I'm learning a lot. please keep making them.

Absolutely love the stories, keep up the great work!

Ahhh!!! Video ends right as story gets going!! Lol I watch Wes too, he’s good people.

Going to be another learning video. Love these videos. Thanks for sharing.

I really enjoy watching your videos. I split my 5105 a few years back I don’t remember having to take my loader frame off. The job took me a little over 10 hours but I am not a mechanic

Sounds and looks like my 5320, and 5510. This should be fun to watch. Thanks for posting.

Hey Warren thanks for another project video. Can’t wait for the rest of the cat story! Great work man!

My first time watching your videos . You seem pretty knowledgeable with common sense. I'll be watching. God bless battery impacts .

i like one lonely farmer. a great hard working man and has good helpers working with him as well.

Time goes fast. Take a vacation break. The work will be there because you care dearly for the work you do!

That green parts network is nuts if not in stock then usually next day. I do enjoy my green machines for ease of repair., Good video can't wait for the rest...

I watch your channel all the time. I have had a service truck with the same drawers with the 2 latches and I hated having to use 2 hands to open them so I put a cable between so all you have to do is pull on it and both latches would open.

Hope you get time for vacation...You have earned it...

I like how that engin lift has handles to move it around.....all the ones iv used homemade or store bought dont have them....I never thought about it before

Left us hanging Warren 🤣. Keep up the good work. 👍 The more stupid people you deal with, the smarter you get. You are truly great at what you do. Thank you!

Hey Warren, Mike from NEPA. Been Away a bit, but Enjoy your Videos a lot. My gather had some heavy Equipement in his day I helped fix them all. Anyway, Very happy to see your selling shirts and hats. Would love to see your Apparel show your Dogs!!!!!!

The 5x03 series are Indian made tractors. They were economy machines as you can tell and they didn’t catch on super well on this side of the pond. Bit of an oddball. The 5000 twenty tractors were the more mainstream, better equipped 5 series tractors of the time. Thank you for the videos brother

I wish I could move out there and help you out for a month or so man! I would love to learn anything you could teach me! Could definitely use the experience at home here on our dairy farm in NY and yes those quick couplers are ALWAYS TIGHT.

Looking forward to part 2

Running and gunning, makes 2 of us. I got to get in touch with you about my laptop one day.

Warren don't worry about what other people think, your busten your hump and doing a great job. And remember if you get behind need a hand let me know.

Yes sir, Wes Pandy is a good fella

I admire what you do, and I wish I had taken better care of my body when I was young, I wouldn't have so many chunks of titanium in me if I had!!! And what did we all do before Milwaukee and their impacts?!?! Man, I would be lost without mine now.

Funny, had the exact same issue with cat last week!

Good video Warren. Wish it was longer though........

Another awsome Video warren thank you for the Videos

Those 5000 series tractors are real popular with the golf courses and plant nursery operations down here in the area of Florida I live in. Them and Kubota tractors about the same size anyway.

overalls usually have knee pad pockets for pads to go in .

Quite a cliffhanger on the CAT story. Make sure to follow up on that one!

That’s like calling 911 and hearing “All operators are busy please hold or call us back later” while you watch your house burn down a few feet from a hydrant. Dumbass situations that some businesses put people thru! Meanwhile back at the ranch.....

Hello Warren That awesome you have t-shirts will you have more options for sizes for the T-shirts thank you God bless yall

Watch that hyd. Pump suction pipe... rear hose likes to twist Im repleaced them all the time... i had 2 pumps fail and put hyd. In the oil...

I once got an oil change at walmart and they forgot to tighten oil plug. Driving back home i saw a cloud that i thought was dust behind me. It was oil burning when it hit the exhaust. I heard a ping and that must have been the plug coming off. I stopped on the shoulder and all the oil came out. From then i do all my own oil changes

Keep up the good work and telling it like you see it! I just ordered a Duke shirt from link in description since I like watching your content but use an ad-blocker so you don't get KZfaq money from me.

I have to be honest and say we don't have any problem getting JD parts here either. We have a new Kobota and New Holland, I guess I'll have to wait and see about them when they need replacements.

"If it keeps it from coming in two, take it off." -- Warren, 2020

AWESOME how do you keep track of pieces. you must have ten jobs on go.

He;s back Yee-Haa

Have you finished the grader rebuild? Last vid was engine install. Looking forward to you grading your driveway.

It looks like with all the shop work need a second set of washing machines just to watch the close I also learned something with shop Rags & Shop close if you put a couple cans of Coke in the wash with the soap they come out really clean

Warren, those coveralls that you are wearing are going to present someone a rather large challenge. The dirty and covered with crud ones are always the most "comfortable," right? Keep on plugging away, you have a hell of a lot of us with you.

I was wanting to order some shirts but I didn’t see any 2XL option. Do you know if you will have those sizes soon? I love the videos. Keep up the awesome work!!

did you ever get your knee fixed? i am looking at the same surgery eventually

Shit, you were just getting to the good part, no pun intended.

How is the grader doing?

What happened to the grader?

Far as I remember 90% of plant had a tank shut off/ fuel tap,whatever you want to call it, motorbikes, boat engines,everything but cars, and I’m certain they had them once upon a time !

Warren it sounds just like my 5410

I looked at a house in Powers a year or so back that has a shop identical to yours. At first glance I always wonder, "did he buy that house?" Lol

When I finally get bolts to move I spray penetrating oil on them immediately and work them back and forth. If that doesn't work out comes the torch!!!!

I see service truck hood open what the problem .

I like Wes Pandy too.

Good video as always Warren . just curious i have a John deere question for you. We have a john deere 5200 mfwd tractor very similar to the one you're working on in this video. Well it has a bad seal on the steering cylinder looking at it it looks like the cylinder is built into the axle housing, im wondering how to get that cylinder out or if you can just replace the seals with it in the tractor. Thanks for the videos and thank for any info you could pass on.

Changing front crank seal on 5205. Need engine front raised bout 3-4 inches to clear front axle. Don’t want to split this thing. Any suggestions?

I'm also a heavy equipment mechanic and been admiring your stick flashlight what make model and how you charge it on the road thanks for your time

1,500 hrs smoker ? Over fuel or abuse? Dusted, bad air intake?

You are right a lot of people do not like me.. and that’s ok because I don’t think I need to be liked by everyone. I only need to be liked by my family and friends. Most people that don’t like me couldn’t walk a morning in my shoes and that’s it.

Was that willow creek ranch in McCloud?

Why do you have wood blocks, on the front axle between the frame? Is this to stop any twisting?

What is the cost of changing clutch on Montana T7074 Tractor ?

The smoke made me cough at my computer. LOL

I have a 5105 , 5000 series tractor, almost the exact same tractor, I have a John Deere M80 bush hog hooked up to the PTO and after about 15 mins I lose power, it will barley climb a small hill and the most rpm I can get out of it is 16,000 with the pto off its like its loaded up , when I start the tractor cold I have max rpm 24,000 .I changed out fuel filter no water in the fuel it runs just alittle warm alittle above normal but with the PTO disengaged the tractor loses power, any thoughts where I might start ? You are the best mechanic I have ever seen , thank you for your help

Wonder if that tractor has the 2 clutch s in one ? Pto and trans like 5300 does

knee pads.... reminiscent of sub qual days :-)

I have been told that Deere is territorial in western Can. Most Deere dealers here in Ontario own multiple stores. I have a tough time buying anything from them too pricey for my operation.

A newbie here but fantastic content and tutorials! Are you located in California or Oregon?

After school shop class, girl changed the oil in boyfriend's Chevy, drained it, changed the filter, then proceeded to pour 6 quarts of 30 weight oil in only to watch it pour out onto the floor because she hadn't put the plug back in!

Hey mate, serious comment here so hope you get to see it. I clicked on your link as soon as you mentioned it in the vid although I don’t need a new T-shart I want to support the channel. The shipping cost to Australia is like $25 bucks making it a $40 t-shart. Not being a cheapskate I got no problem chucking $40 bucks into your beer fund just want you to get the whole lot not reduced as a shipping cost. So long story short have you got some type of pay account I can drop a few bucks in for your shop beer fund?

All your caps and shirts are reasonably prices - not like some of the other channels $25.00 for a cap and $25 to $40 for other items

How many hours do you think you had in this job? I have a customer that want me to do the same thing to a 5075E.

Like your comments on family

too true. I have known people I would have back then done damage too at whatever personal cost. but by waiting they got the payback karmawise...

I so wanted to hear "the rest of the story!" I guess I'll be tuning in for part 2! It also sounds like your cell service is going backwards too! It makes me shake my head when I hear the big cell carriers talking about "5G" coverage when so many struggle to get "1A" coverage--1 bar of analog. I guess you can't get analog any more, or can you...but you get the idea. BTW Warren, enjoyed your video. It was cool that "one lonely farmer" gave you a shout-out. But I don't like him. He has had some decent videos, but too often he's trying to bust somebody's balls. Don't care for that approach.

Need crazy town t shirt.

Warren you shouldn't be so damn good at your job then you wouldn't be so busy LOL ☺

Winter time they want to have their equipment serviced and fixed , summer time they want it repaired faster to get back to work.

Like that tractor. Not sure why there is 17 dislikes on the video.

no 2x for the big guys?

I have a 5103 that lost the clutch at 1400 hours and also if we don’t keep it parked under a shed the hydraulics will get water in them, John Deere really dropped the ball with this series tractors

Making bank I hope!

Hi brother, I am a mechanic from Morocco. Please send me the program to download Caterpillar and jcb thank you

got into that dealer delima to local cat doesnt sell industrial so i have to drive fifty mi farther thats why i use american crane they sell any where third of price as cat

Yes Sir, Parts Always Some Co's. Just Fail

Used to be a fan of OLF but not so much lately very few repair videos and a bit to Trumpy for my taste.

old 2 cyclinders john deere had tank shut off

Those 6.6 manifolds are junk. They crack in the center. At my company we have changed 20 on our machines in 2 years. We got ours from costex tractor parts. Aftermarket cat parts.

Usta own a 5300

Ever run into the hate the dealer gives non dealer mechanics? Do you have “your” part guy you deal with at John Deere? I do, the one guy who actually helps. Find and cultivate that relationship. May be worth your while to drive to that guy you spoke to. Invest in a prius tho!

1500 hours and it needs a new clutch?

Peterson Cat Huh?? I'm surprised you got anyone at Holt to answer the phone either. I keep getting emails from Cat about wanting to help me with parts... Mike Rowe's picture on the emails. I call and because I'm just a homeowner with a Cat... I get put on hold and they never come back. I called YOU this week. We spoke... did you find a number or talk to Cody?? Thanks Warren.

Tractor with loader= clutch

So what;s the end of the story???????

LOL you think it is bad your knees are going south just wait until you hit your 60's when everything on your body starts to fall apart! YEP better start taking care of what you have left or one day soon when you find out one morning that you cannot lift your arms above your head at which point it will be to late.

Sadly I don't have PayPal... Or I would buy a T-shirt. I pay with IDEAL..

glucosamine chondroitin and MSM (all in a pill). take that and have happy knee joints.