Whalen's Speed: EP10 | 300WHP+ Stock Can Am X3 Engine Tear Down

Рет қаралды 24,700

4 жыл бұрын

Nothing to crazy here. For the ones who are interested. We had the opportunity to tear and check out some of the vitals of our engine. This is the original engine we from our 2019 XRC. This engine has plenty of dyno pulls, 40 psi of boost and still ran great until we pulled it! But, John explains some of the things going on inside. If you never seen what's inside a 900 ACE Can Am engine, this is great video to watch. THANKS!
-WSRD
Performance Can-Am X3 Products/Polaris Products:
www.whalenspeed.com/
FOLLOW:
Instagram / whalenspeedrnd
Facebook / whalentuned

Пікірлер: 49

@kessler89canampowa 4 жыл бұрын

100% transparency, if you don't go to whalenspeed for your X3 needs you're only settling for second best 👍🏻👍🏻👍🏻

@whalensspeed 4 жыл бұрын

We appreciate that, Kessler! Thank you!

@ryan_2237 10 ай бұрын

Although you did this video 3 years ago, I had to comment just how useful it is in 2023. Such a great learning video. Thank you so much!

@bubbabelaire6422 4 жыл бұрын

Thank you for what you do for this community John, and the whole crew at whalen speed.. great video as always

@whalensspeed 4 жыл бұрын

Thanks, Bubba!

@jacesparrow8884 4 жыл бұрын

Nice video very descriptive. you guys are progressing the game!

@whalensspeed 4 жыл бұрын

Thank you, Jace.

@canampilot9248 6 ай бұрын

Good job, you are the Michael Jackson of the X3 engine

@chrisrankin435 2 жыл бұрын

Great job on the video well done and to the point. I'm glad to see what a well built engine I have in my x3

@jeffhorn6052 6 ай бұрын

Four years later now.. Have you broke a crank yet? Awesome video as always!

@whalensspeed 6 ай бұрын

No OEM cranks yet.

@juanjimenez4874 4 жыл бұрын

Hands down I will be getting your setup tune for my 2020 x3 rr

@kurtmcmichael2045 4 жыл бұрын

Great video. Thank you.

@gregorykiest3683 2 жыл бұрын

Just found your video. My X 3 is at the dealer for a timing chain tensioner and whatever else it took out. Warranty or it would be at your shop like my clutches. Great service both visits. 👍🏼

@_american_overlander_ 4 жыл бұрын

Awesome vid, per the usual

@whalensspeed 4 жыл бұрын

Thank you!

@bucken131 4 жыл бұрын

Awesome video

@whalensspeed 4 жыл бұрын

Thank you, Joshua!

@rick4788 4 жыл бұрын

Great video.

@whalensspeed 4 жыл бұрын

Thanks, Rick!

@ajsmith562 4 жыл бұрын

This is awesome

@whalensspeed 4 жыл бұрын

Thank you!

@uazbuchanka2206 4 жыл бұрын

Thanks for the vid. I wonder the Pistons has no teflon (coated) pistonskirts like other high performance engines. Greetz from germany.

@arlesnunez1647 29 күн бұрын

Gracias por traducirlo

@chrishenniker5944 Жыл бұрын

I’m thinking you might be able to put it in a small hot rod, like an Austin 7, Fiat Topolino, Hillman Imp, Crosley, Ford Pop or something similar. The question is what transmission would you use?

@rdlewin1535 4 жыл бұрын

195 horse x3 with 91 octane tune and clutch kit for trail. What is max performance rpm.? 8,000?

@okcmoparguy724 4 жыл бұрын

John have you done a tear down on a YXZ engine? I'm curious about the crankshaft firing order between it and the X3. I have an X3 and the only thing I'm jealous of on the YXZ is the exhaust note. The X3 sounds more like my little Kubota where the Yammi is more musical (go figure they also make instruments). Are the firing orders different between these 2 mills? Awesome video btw, when I turn the wick up on mine you'll be getting a call.

@whalensspeed 4 жыл бұрын

Thank you! You can give Dylan a call in the sales office anytime if you have any further questions about what will suit your machine best. As far as the question about the YXZ stuff, we haven't really dabbled into that market much. We have tuned a couple NA machines but other than that, we have not torn one down or built an engine.

@getstuk87 4 жыл бұрын

I'm curious about how / why the yxz sounds like that too, definitely the best sounding one of the bunch at the moment

@tagsdaddy 3 жыл бұрын

What, my x3 sounds like a hayabusa or an R1 lol

@willismartindale5569 2 ай бұрын

Gotta question if you think could hlep me sunk my canam turbo rr xmr and the snorkel kit wasn’t hooked up properly water had got sucked up into the motor changed oil about six times and it was still mixing water with coilant chnaged head gasket everything didn’t fix issue so removed the motor and the stator case was full antifreeze and to mention this is brand new motor any suggestions what could be the issue .

@amirbell983 2 ай бұрын

Hey there 👋 Need some solid answers please before making my purchase I'm planning on buying a 2020 X3 xrc turbo rr with the ace 900 triple. My concern before hand is the life expectancy of the engine. In your experience if I were to take really good care of the maintenance and not drive like a mad man ( I plan on doing 75% of driving on road a little trials) Question is 50k miles realistic with not going near the engine or rebuilds stock? Can a rotax engine live that long with not burning oil and issues in general.

@MegaChomper 4 ай бұрын

Friend, can you help me on how to put on time crankshaft and camshafts of a maverik x3 2018

@whalensspeed 3 ай бұрын

We have a whole video on wow to time an 900ACE engine.

@MrSteve8511 3 жыл бұрын

Should have done a liquid test on those valves before removing...

@simplybuiltgarage Жыл бұрын

Would a honda k20 fit in their with a type of conversion plate.

@whalensspeed Жыл бұрын

oh, i'm sure it could be done!

@ytcoleman 4 жыл бұрын

How long will a stock engine last that’s being serviced regularly?

@JohnWSRD 4 жыл бұрын

A long time at moderate levels with proper fuel and tune

@viniperini Жыл бұрын

@@JohnWSRD long time like what? 1000 hours?

@jdtv...9134 Жыл бұрын

The crank will bend at around 400 ish HP under boost

@whalensspeed Жыл бұрын

We're not seeing that.

@jdtv...9134 Жыл бұрын

@@whalensspeed realstreetperformance is breaking into the same exact engine. That particular one had 400 ish HP. Boosted of course,a ringed block and that crank was bent🤟

@whalensspeed Жыл бұрын

@JD TV... Interesting for sure! But, we've been past 400hp for a long time now. Crazy things do happen when making power, though.

@jdtv...9134 Жыл бұрын

@@whalensspeed fifteen years ago if you told me you were getting 400 horsepower I wouldn't believe. Crazy how things have advanced, I love it...

@Alex-oq8kj 4 жыл бұрын

Big takeaway.... stay away from Leakage

@afterlife5404 2 жыл бұрын

You guys need a better or new camera the focus is tairabile

@whalensspeed 2 жыл бұрын

No, its pretty good for what is. Auto focus isn't the best in lower light. It's "terrible". I appreciate it though.

@benfrank1583 Жыл бұрын

Im wondering if internally the head and block is the same as the can am ryker 900s and seadoos and ski doo 900s. If so that opens alot of potential to this ryker i have 🤔🤔🤔🤔🤔🤔🤔🤔🤔