Very cool! Welcome to Scag Nation and thank you so much for your business. Enjoy the mow!

Yes as soon as the music started I was rolling. Great job and nice looking mower.

Oh that is awesome!!! I love the music while you were mowing. It made me giggle. Hi baby girl! ALSO Thanks for representing my masks!!

wow, you started a small lawncare business and you went all out right out of the gate! congrats!

Same exact reason I ordered 1 just today for my business. Yards with small gates. Excellent choice.

You're right this Skag gets up and goes! Nice cut too🌻

Good Job Guys!

You did great , you should start your first pass higher to avoid scalping and the most Important thing on the list , the tell your friend to buy his own blower so you can borrow his for your daughter

Brilliant machine it will pay for its self

Great video,LOVE the F350. Stay Healthy

If that was your first time pal then you are a natural. Greetings from England.

I like how the rabbit pops out of nowhere 😂🤣but I like scag 32 mower that’s the one we need in our landscaping company we have bobcat 32 walk behind.

Hell yeah dude nice machine and hope it’s Making you some money.

I’m sure you figured it out by now but when you do the bulletins and high spots, you want to set it at 3 1/2 that way there won’t scalp I did the same thing got the same exact mower. The thing is awesome.

Thanks for your video I went out and bought one I added the grass catcher for leaves and grass clipping Thanks you

Just bought my v ride 32 yesterday man I love it I have 2 other Ferris zeroturns a 34 and 61 in deck I just had issue with gates and this mower is a game changer fast easy to control I just don’t like the height adjustment bar outside of that I’m glad I made this choice over buying a toro 30 inch wall behind going to be getting rid of my Ferris 34 in z turn need another scag b ride I’m hooked

I have a Worldlawn 32” stand on and I’ll tell you: I would trust my push mower height before I trust those measurements on my stand on. I’ve had to mess with the spacers and tire pressure to nail down the cutting heights. Hope you’ve been able to figure it out since you made the video.

Best of luck KEEP MAKING MOW MONEY$$

Have to check the chains and all on the mower... when I first started using a srs36 Ferris... the height was off about a half inch.... was real easy to fix.... no more scalps...

The bigger the blades, the taller you will have to mow. Smaller mowers will ride over the unevenness of the lawn, but bigger mowers will just scalp all the bumps. You will have to pay a lot more attention to how flat the lawns are with that thing. If you are mowing a lawn on a newly constructed home, you need to be very careful. New homes have absolutely horrible lawn out where I live in Texas. There were dips in our lawn that you could have easily broken an ankle in.

I guess it’s a pretty good video if my only complaint is you said basketball “goal” instead “hoop” like normal person but I’m in. Subscribed.

I been looking at getting one of these, to start cutting lawns.

You gotta set the deck height as its doesn't come from the factory at the correct measurements. Just put it at the heigh you want to adjust (3) then get under the deck with a tape measure and measure the blade distance to the ground. Adjust the bolts on the chain until it is true to the number and you're good to go. They recommend it to be slightly lower in the front than the back. Just refer to the manual. I have a 52" V ride 2 with the velocity deck and it is the best mower I've ever run.

I love my 32”!

I had the same issue with the cut height when I got my V Ride. It's 3.5 cut shorter than my JD tractor 3.5.

Get company T-shirts for your family I think they would love it and they double as Christmas and birthday presents for your friends definitely get a top left pocket that’s where your mask goes

I use a 42 XL and same here I cut at 1/2 higher than my mower setting to match cut height

I can almost garauntee that area by the street got scalped because the front wheels went over the curb

My V Ride was off by over half an inch from the factory!

This is exactly what I am about to do. I'm in Garland Richardson area. I've been to Frisco Power as well. They had the best deals.

I just bought a 32 vride and measured the blade height at different heights and it’s dead on.

Nice mower just subscribe

Congratulations I cant wait to get me one.....nice

I’m after that exact mower I currently have an sfc30 and a 61” Cheetah 2 but that’s next

Pick your blades up lol and make sure your deck it adjusted right 😂

I Agree! Who makes a good 32" walk behind? I used to have a belt drive 36" Ex Mark and wish i had never sold it !! The only belt drive I can find now is a SCAG but don't like the pistol grip controls.

I have the scag 36 and I had to adjust the high on the deck because it was half inch off.

Nice

The scags are about a 1/4 different than other standard type mowers

Awesome mower. Hows are you liking it?Also if you raise your deck 2 notches when you go over it it kickes the clumps out alot better.

Sca in Scag stands for scalp, just saying lol. That's what they're known for, still would love to have one.

Front tires were lifting off the ground even when slowly and gently turning around on a flat yard. I'm 6'5" and 225 lbs. I think I'd have a tough time keeping the front tires on the ground also.

You plus the mower is 1050 lbs(if you go 250, mower is 800lb) on narrow tires, be forwarned. Nice morning ground soft from dew and youll rut and tear, on those dog days of summer when rain is scarce you'll hit a 3 pt turn and peel that grass like a apple, keep the push mower on the trailer. Many folks in my area aint letting you near their yards with a stander.

The decks on scags do not float so if your lawn is un even it will scalp those areas unless you adjust deck while mowing. I normally cut at 3 1/4 or 3 1/2 for my customers.

Have a swz 36" and 52" vride. Would much rather have a 32 or 36 stander. How are the narrow tires working for you. Love the music.

May want to check deck level some time they don't level them when they put together .

If you let your tires roll off the grass it will scalp it.....which is what happened there. Also, cutting grass too short will scalp it also....I will not mow under 4 inches unless a client ask me to and then I will not go lower than 3.

Need a chute blocker for small yards. Or mulch kit.

I bought one the problem is when it’s wet the skinny back tires make ruts in the lawn

I seen a scag v ride 32 but it was a 15hp pull start. I haven’t seen this one.

Hey question I see you in Texas . Have you gotten any luck on best mulching settings. I have upgraded my discharge with a discharge block. And had switch my blades with mulching blades but I haven’t upgraded with a mulch it kit that includes extra baffels. Just curious if you have any suggestions

Do you still like it? Does it tear up the grass much? looking to start a mowing biz here in Aus, cheers

A very good mower but the rear wheels are to skinny hopeless on slopes especially when a bit wet and leaves ruts when in soft ground other than that very good machine

What does something like this Go for I am looking for the next step down from the 36" I also have a 48" but I want to get the next step down from the 36 please comment back what the price would be on this machine Thank you for this video good luck with it

How did it hold up in soft yards with them small tires.. in Maryland we get lots of rain.

Nice! What's the price on this Scag? I like buying brand new also.

I do have a question... Did the shredding of the grass blades go away when you switched to the mulching blades??

Price for that mower is outrageous....32 walk behind with velkie seems a more cost effective way to go

I got one yesterday. Hows it been for you so far?

Minute 8:10 you said cuts right but it look chopped that can open for desease and lawn blade . Also you have st Augustine you can’t cut low as you would on Bermuda or Others . St Augustine I would say 4 inch’s you cut at 2-3 inches that’s to low

I just realized I hear locust. I never hear them in Allen.

You probably already figured out the deck adjustment but on the the bottom of the handle you use to put the deck down there should be a area the a pin and holes

Yes it will change due to weight lawn mower will ride on the grass but you have a 500pound machine it will ride lower

Can the 32inch V ride cut low? I purchase a 2021 Gravely 32 Inch stand on can not cut low I need a 32inch stand on that Can cut low badly!

What was the cost of the 32" scag video, if I may ask?

Does the Skag come with a banjo player?

How much do you weigh? Does it leave ruts when its wet?

Nice mower. how much is something like this?

Hello I have part number for the Accelerator bagger for your Scag 32

Would you say Gravely Pro stance 32 is pretty much same thing?

8:05 Holy crap, that is NOT real nice. It looks like there was absolutely no edge on the blade. Those cuts should be clean, but it looks like it was ripped off. Any chance there was some kind of protector put over the blades on the lawn mower?

Does it have plenty of power ? thanks

What made you get a 32 inch than a 52 and up inch mower?

Hello sir is 18 hp or 15 hp?and how much is the cost the mower thankyou

Guess dealer couldn’t afford to fill it with gas or level the deck ?

I would be mad if that was my yard.

Why did you say you started a lawn business? What did u use to do?

Try mowing at 3.5 or 4 inches

You should never cut grass below 4”. Anything below 4” will put way too much stress on the turf unless you get rain 3x a week. I’ve been in business for almost 15 years, about 90% of the lawns I cut are set on 4 1/2”. I have a 61” vride 2 with 37hp Kawasaki engine. You are also turning it wrong. You should do a 3 point turn or when you get to the customer you will tear up their turf. Those machines stripe amazing, just put the front tire about 3” on the next stripe where you haven’t cut yet.

May I ask how it’s still doing?

what size trailer is that ?

What’s the years of your F250 ??

How does this do on steep hills?

Great, video! Do you have an Instagram? We are your neighbor up north in McKinney.

8k for a 32inch mower you should have went with a wright stander for under 5k

Very gate enabling mower lol

Paddle faster I hear banjo music.

Tires are way too skinny

Your deck is set way too low you’re going to burn up a lot of peoples yards

Lol need to work on your skills

You still rocking this machine? Any issues? How's the business going?