Your demonstration for how the printers work (around 2 mins in) is fantastic! Exactly the kind of practical demonstration you’d expect from a professional television show, well done!

Small tip when you hear that separating sound: get some PTFE spray and spray a tiny bit on the FEP, after that use a paper towel to dry clean the fep (don't use water or other stuff). This should leave a really fine layer on the FEP and removes the "separation noise" additionally layers will also get off a lot easier from the FEP which helps avoiding the stuck FEP problem (oh yeah and keep your room at 23°C or higher, resin doesn't like cold rooms. Other things that exist are like magnetic flexible print beds, which makes removing prints a lot easier For elephant foot there are tools that compensate for that by shrinking the first layer, though not sure if they've got ported over for the newer printer file formats.

Thank you for the Valentine's video filled with heart.

oh.my.freaking.god. this is how you make a great and simple video about 3D printer.. this one is the one i was looking for.. thank you kind sir, now i am sure i can order mono se :)

Great video, easy to comphrehend and well put together, thanks

Interesting video as always 👍🙂 Thanks for sharing your experience with all of us 👍😊

If you need to quickly make a part clear, dip a paper towel in mineral oil and give it a good greasing. It will quickly rub off and it’ll make it impossible to glue, but it’ll look crystal clear while it lasts.

The surface quality is just AMAZING

Great set of helpful tips! I think a resin printer is in my future.

Yeah, first time of hearing that the print time is based on layer count instead of print volume, came as surprise. Even though it's kinda obvious when we think about it. The results of your experiments with 3D printed lenses are fascinating.

Love the nod to Andreas Spiess!

Nice video. I really need to set up my resin printer - there's a lot of nice LED stuff to build with these clear resins

Great stuff! By the way, when printing flat things in resin, you can just put them flat against the build plate with no supports needed! It takes a bit of prying to get them loose after printing and there might be a small bit of "elephant's foot" , but the savings in print time and post processing are well worth it.

Whoa, I just learned a whole other rabbit hole here

Thanks for showing how to clear up clear prints. I was kinda sad when I washed my part it fogged up. Gave it a coat of clear UV protectant and now its clear again!

little tip for removing supports. after printing and removing from the build plate use an old hair dryer on the supports this will heat them up and they will start to warp and you can brush them away from the prints without leaving any puck marks on the models. i would suggest buying a Sovol photon vat for the photon mono as the quick replace fep sheets cost a lot of money and you will save money in the long run with a metal vat.

I'm not having any luck with my Anycubic Photon X but i keep on trying.... you just gave me fresh courage ;-)

he is alive :) nice one, I like the transparent stuff. If it was just not like chemical warfare

speechless ...... great !!!

Excellent review ! Indeed, helpfull and also entertaining.... ;-)

Nicely done and well explained. It didn't feel like an advert, which I liked. It also didn't feel like you just crawled up Anycubics bum to get a few free printers for a good review. So well done.

It’s actually MSLA (masked stereo lithography) being used in resin printers with and lcd used for masking and a led array for projection, SLA is used in printers with lasers.

Great vid.....Fantastic English....

Nice, looking forward to seeing the projects you do with this. I have a Form 3, I think it's not really better than the Anycubics from what I've read. It has problems.

Use PTFE spray on the FEP film and it minimizes failed prints from stuff being stuck to the FEP, ruined my day a few times on my anycubic mono X where a failed print can be 600ml that you need to drain

Your ping pong led wall is giving me a cool optical illusion!!

You can "clean" and reuse the IPA by placing it in the sun for some days or using an UV light. This will cure the dissolved resin and you can filter it using paint(?) filters afterwards. Well, at least that is what I've read somewhere. Might also solve the color issues? (When they are caused by this, idk.)

Thanks it help full

The resin printers definitely open up a lot of possibilities. I bought an Elegoo Mars 2 about six weeks ago, and have been learning to use it. I used a couple of bottles of the IPA-wash resin, and then switched to the water-wash resin, which isn't really any more environmentally friendly, because you have to then figure out what to do with the water contaminated with toxic materials. But it's cheaper and easier than IPA. I have a big tupperware container full of water to do most of the initial cleaning in, and then use a spray bottle of clean water to finish off. The clean water drains into the big container, replacing what evaporates. It works pretty well. I bought one of the "ABS-like" resins, and it is, indeed, quite a bit more flexible and tougher. I'd like to see what you think of some of the new flexible resins that are becoming available. You can apparently also mix it with other resins to make them stronger. Those gears were pretty impressive. There's a planetary orbit model out that I want to try printing the parts for with the resin printer, as my FDM printer doesn't do it justice.

Nice bro

Cool wie immer bei dir, das Herz sieht super aus. Wie lange hat es gedauert in Resin Printer?

My dude, look at Nertronic's recent video, he made an app for adjusting the code for your first layers, bringing them back to true dimension. He tests it on gears, it solves one of your problems.

Ordered a printer through your link. Hope you still get a kickback

A transparant hart is so nice for education purpose.

AmaZing

Hi. This is great! Great video as always! Is the resine recyclable? Do you think you can make a len and then modify it? Thanks!

Did you manage to get the orrery gears to mesh properly? I've printed a few spur gears and I've noticed them warping over time.

Nice for a giveaway :-)

I've heard (still not tried out) that clear resins really depend on curing time, otherwise they get a yellowish touch.

I wonder if you could use it for printing masks onto PCBs for etching by attaching copper clad to the build plate...

What clear resin did you use? Looks very good!

Very informative and Rick Rolled to boot

Is Resin more expensive and not as loud as FDM in your experience ? Wonderful stuff thanks Bitluni and you got a great personality

KZfaq wont let me click the like button more than once, i'm sad !

Ughhh..... been resisting getting a resin printer. Just haven’t thought I really needed one for my applications, but it’s getting harder to not get one. Lol. The lenses were really cool

Really liked the “Out-of-the-📦” Explaination using a small Dab of Resin & Covering the FEP - with the ⭐️ Cutout🤓🤩🤩 Killer Seeing this Demonstration & Open my 🧠 up to why stuff happens…(not just a magic box) 🤓😂 🙏Thank U🙏

Is it possible to expose photoresist for the PCBs in a TFT "screen" of this printer?

well! He is also a man of culture... nice!

hi, is it possible to use the resin tank of the anicubyc photon mono SE on the photon mono?

Nice reenactment, lol. The price is falling and the quality increasing pretty rapidly, how long before we see 8k resolution on these? I think the rub now is the software, the software should reliably auto-support the model and ALL the islands for instance. Software should perform this function with far greater fidelity than a person can and far more than it does currently.

ii have a question, used blender, and some object are not joined but intersected, will it print together on SLA printer?

You got to wash and brush your models 😉

i want one

What was your master thesis about exactly?

Very nearly Rick Rolled!

can anyone tell me the difference between the mono and the mono X, does 4k res make a massive difference from the 2k? the price is almost double for the difference. I want to make micro miniatures with it . thanks

hab schon überlegt zwischen dem Belichten und Hochfahren immer wieder dias Bett vibrieren zu lassen das sich das Rezin sauber verteilen kann, wenn man dieses Vibrieren geziehlt stehen lassen würde könnte man dieses Stufenbilden etwas verwischen, oder was meint ihr ?

What was the clearest resin that you tried?

interesting

The real reason he wanted these printers @6:40

Why no lan option, is it that hard to incorperate lan function so you don't have to change usb sticks the early photon's had a lan connector and chip but no firmware that supported it. Ow and directories on the usb stick still doesn't work (Photon S v5.0.2)

Strange question, but how viable do you think running one of these would be on a boat using LifePo4 batteries?

Helpful CHECK Entertaining CHECK

Bitiuni is a weeb? Who knew?

> has master thesis Suddenly you seem a whole less clumsy as you make out to be

That's MSLA my guy.

The links do not work for me :(

my resin prints only turn out well in the center of the buildplate, everyhing outside the center with a radius of about 2cm fails/warps does anyone have an idea how i could improve this?

R.I.P. TO MY EARS!!!

1:39 Bubbles

I bought a new Photon S, cannot get it working. Giving up, wasted money on it.

love your channel... But I' ll chime on an ABOSLUTLEY unbiased review as I don't want nor need to receive any free hardware from any company. You forgot to mention that just that even at a 2 min cure (lowest setting) it will yellow the resin. You did not mention one of the most important parts of any printer.. The software, Photon Workshop is filled with bugs. To be fair the prints are great!

Lenses...

From studying they are NOT the sane printer. The Mono SE is 0.05 mm layer

Ok, does anyone know who made the anime girl bitluni printed?

10:50 hahahaha jajaja kkkkkkkk

0:24 - Master feces 😂 (yes i know thesis)

"helpful or at least entertaining"? i will notify Andreas Spiess for your shameless plagiarism!!

I learned its messy and useless. figurines look nice.... thats it..

When you buy stuff with your own money and review them, then your opinion matters to me. Otherwise, you're considered just another YT shill, doing reviews for freebees and sponsorship money.