What is Bracing & Why Bracing is Used? How Bracing carry Load?

Рет қаралды 104,858

4 жыл бұрын

#Bracing
#Pipe_Rack
Learn what is bracing, why bracing is used and how bracing carry load.
You must have seen that in many steel structure bracing are used.
But do you know-
What is Bracing?
Where bracing is needed?
How Bracing carry load?
Well, This video will explain you every thing.
=========================================================
Don't forget to SUBSCRIBE my channel to get civil engineering video on ANALYSIS. DESIGN. Construction
.=========================================================
You may not find your Costly Engineering Class useful. But surely here you will get all the important civil engineering lesson not only FREE but INTERESTING!
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product with the links that I have provided, I may receive a small commission. But there is no additional charge to you! Thank you for supporting me so that I can continue to provide you with free engineering knowledge every week.And help you to develop your engineering skill.

Пікірлер: 97

@teluge4132 2 жыл бұрын

I understood this thoroughly, which surprised me. Thank you, you answered my question on what sort of bracing i should use and why for a diy.

@TonmoyMaity 2 жыл бұрын

Great...go ahead Buddy

@Khalid3212 3 жыл бұрын

This is such an excellent simple explanation! Good work, appreciating your effort.

@keshormedda4541 3 жыл бұрын

For more Revit Structures and Tekla structures Tutorials go to my channel, click on the following link kzfaq.info

@bensonjordan103 2 жыл бұрын

Instablaster...

@tengmilano 3 жыл бұрын

Very nice and clear explanation I've seen.

@murugalingammanoharaj5240 3 жыл бұрын

Really great content. I dont known why people are giving dislikes for these wonderful videos

@TonmoyMaity 3 жыл бұрын

Ha Ha...may be it could be explained in a better way which I could not..

@mahakbassi6467 3 жыл бұрын

excellent explaination

@notarivsanonymvs2561 10 ай бұрын

Thank you for taking the time to share your knowledge. You break it down very well that my 12 year old child understands it.

@TonmoyMaity 10 ай бұрын

Great to hear!

@awruniverse6251 Жыл бұрын

hello mr tonmoy, before it I want to thank you for all your videos on this channel. i want to request, can you make videos and explain about tower structure analysis like transmission lines or telecommunication. analysis members and all joints are there.

@sathyadev4898 2 жыл бұрын

SIr you videos are really helpful, i have a small doubt why vertical bracings are provided at mid of pipe rack (i mean i want to know how to decide vertical bracings position) kindly reply

@niharikarajesh5311 2 жыл бұрын

Sir, your video is really helpful for all of us. Thank you very much. Can you please explain about the concept of dynamic analysis and static analysis by visual explanation and also by Staad pro please

@TonmoyMaity 2 жыл бұрын

I will try

@Szhihihihihihi 11 ай бұрын

Thanks !

@harunwagura4727 2 жыл бұрын

Wonderful explanation. Thank you!

@TonmoyMaity 2 жыл бұрын

Glad you like it

@sanknoor 4 жыл бұрын

Sir every video is very informative👌.plz keep doing the videos.dont worry about the views.god bless you sir

@TonmoyMaity 4 жыл бұрын

Ha ha ha ..... Why should I care for views... ?If my video help a single person (it may be you also) that's my biggest achievement. Thanks for your support🙂.

@keshormedda4541 3 жыл бұрын

For more Revit Structures and Tekla structures Tutorials go to my channel, click on the following link kzfaq.info

@kneedeepsnow16 2 жыл бұрын

The views will come my friend... its only time in the money, of which time is the most valuable.

@myriamhabchi6412 3 жыл бұрын

Sorry fo bothering you just one more question : in the first example you explained it the column was a fixed column at base and has moment connection between column and beam ?

@subhankardey3749 3 жыл бұрын

Sir, can you make a video on the difference b/w star angle bracing & double angle bracing..

@GeeVee-rl9bp Жыл бұрын

Hi, can you make a video regarding the differences of EBF, OCBF, SCBF etc. Thanks!

@oriahmudondo1018 2 жыл бұрын

Great explanation, Thank you 😊

@TonmoyMaity 2 жыл бұрын

Glad you liked it

@myriamhabchi6412 3 жыл бұрын

It is really interesting 👍🏻 but i just have one question : moment connection is when we have fixed support or you mean by it the connection between beam columns and beams ?

@TonmoyMaity 3 жыл бұрын

Both

@raushansingh7237 3 жыл бұрын

Excellent 🙏🏻

@TonmoyMaity 3 жыл бұрын

My pleasure 🙏

@mohammedduraidfalih664 2 жыл бұрын

Superb explanation!

@TonmoyMaity 2 жыл бұрын

Glad you like it.. keep watching

@johnpeter745 Жыл бұрын

Nice explanations. Thanks

@TonmoyMaity Жыл бұрын

Glad it was helpful!

@p.arogyaraju5838 Жыл бұрын

Thank You Informative Well Explained

@TonmoyMaity 11 ай бұрын

Glad you like it

@jewelkhan847 Жыл бұрын

Your video explanation is so simple and easy to learn. Thanks brother. But i Don't understand when i should use single bracing (/) or cross bracing like(x). Pls explain.

@TonmoyMaity Жыл бұрын

I'll try to explain

@sanjaychavhan6097 2 жыл бұрын

Great bro 😊

@TonmoyMaity 2 жыл бұрын

Glad you like it

@stepbystepcivilengineering7707 8 ай бұрын

Well explained.👍

@TonmoyMaity 8 ай бұрын

Glad you liked it

@devendernaikramavath6404 2 жыл бұрын

Yah broo bro thanks more details about breaching

@TonmoyMaity 2 жыл бұрын

yeah sure

@prashantsrivastava372 2 жыл бұрын

very helpful

@TonmoyMaity 2 жыл бұрын

Glad it helped

@structuralcraft 6 ай бұрын

fine explanation

@TonmoyMaity 5 ай бұрын

Glad it helped

@khushpatil726 2 жыл бұрын

Informative video. Can you make video on how to decide the location of bracing like at middle bay or at the end bay. That will clear the whole concept.Thank you.

@TonmoyMaity 2 жыл бұрын

Great suggestion!

@atifnawaz7623 2 жыл бұрын

@kush patil bracing are usually planned in symmetrical arrangement. Like Alternate bays or some repeating pattern after every 4-5 bays if the structure is long. Now when it comes to sides, location of openings,door, access decides it. Bracing is not planned at the side where there is access or opening. Or in such situations k bracing or other type of bracing is provided by which access is not restricted. One more point in consideration is it is a usual practice for same bay bracing (at sides and roof)

@khushpatil726 2 жыл бұрын

@@atifnawaz7623 Thank you

@akshaytapkir6821 3 жыл бұрын

Please make one video on when to use which pattern of bracing( x or A etc)...

@TonmoyMaity 3 жыл бұрын

@kiranmnnr 5 ай бұрын

More brace design videos please

@sanjeevkumarsr Жыл бұрын

Hi I have taken membership, but I am unable to access the video about selecting trusses

@borna6403 3 жыл бұрын

hello! great explanation! why dont we put bolts againts minor axis so then we dont need bracing?

@TonmoyMaity 3 жыл бұрын

Ha ha ha.. great...Dear minor axis does not have any material to cater the push and pull. So ,it is not possible to cater moment .yes it is possible is the member is a box or circular section.

@bitankumarnayak8528 Жыл бұрын

Good

@TonmoyMaity Жыл бұрын

Thank you 🙏

@baduguzaprince3807 3 жыл бұрын

A video on how to combine loads when it comes to use robot structure analysis under AISCI/ACI CODE

@TonmoyMaity 3 жыл бұрын

I'll try.

@baduguzaprince3807 3 жыл бұрын

@@TonmoyMaity thanks alot

@kneedeepsnow16 2 жыл бұрын

It would be great if you talked about the basics of small aircraft fuselage load bearing, bracing, & load transfer. Also if you did the same thing on the wings, and how the wings are attached to the fuselage. A suggestion for a follow up video would be how to strengthen a fuselage and wing design that would make it stronger than first designed. I often wonder why a wing that will handle 3Gs, how it would be designed to handle 9G, along with how attachment and fuselage supports would have to be strengthened and how the loads have to be transferred to the rest of the body. Some of it seems obvious, however not being an engineer my guess is I’m probably not even close. Thank you for your Consideration.

@TonmoyMaity 2 жыл бұрын

I will try

@kneedeepsnow16 2 жыл бұрын

@@TonmoyMaity Thank you sir, that would be awesome. I know there are a lot of people in the experimental aircraft community that would be very interested in watching videos about this and also learning where to find some great resources that kind of get directly into those questions without having to become an engineer. Lol I know that is a difficult request as a person must know the basics and even intermediate engineering principles to truly understand how to approach it. However, Whatever you come up with would be awesome. And if you do come up with something I will send Links Out to all the people in the aviation niche.

@qureshisiddig9274 2 жыл бұрын

What section often is used in bracing

@RakshitParazulee73 3 жыл бұрын

can we only apply bracing in case of Pin joint support ? what abt applying bracing on moment connection?

@TonmoyMaity 3 жыл бұрын

Normally it is not provided for moment connection. But in some cases where huge lateral load is coming , it can be used in association with moment connection.

@atiqueahmed8201 2 ай бұрын

❤❤❤❤

@gautamghosh6081 3 жыл бұрын

Wonderful video.... Please make a video on how to select and optimise bracing pattern for vertical and horizontal bracing.k type, x-type, chevron bracing, plan bracing etc. Thanks

@TonmoyMaity 3 жыл бұрын

Sure I will

@kishorgavali7196 2 жыл бұрын

Share video for steel composite building bracing

@TonmoyMaity 2 жыл бұрын

I will

@silpasathees180 3 жыл бұрын

what happens when the base shear increases after retrofitting?? is it good??

@TonmoyMaity 3 жыл бұрын

Check the whole structure safety.

@ajinkyadeshpande9918 2 жыл бұрын

I'm not sure if the direction of moment about the axis is right.

@TonmoyMaity 2 жыл бұрын

I have just tried to convey the concept

@aravindhanvinayagam2430 2 жыл бұрын

Forces also clever like us,,😄

@pallavisao9613 2 жыл бұрын

Sir pls suggest any good textbook to learn steel structures.

@TonmoyMaity 2 жыл бұрын

Arya Ajmani is best from my point of view.

@pallavisao9613 2 жыл бұрын

@@TonmoyMaity Ok sit thanku

@babar5153 Жыл бұрын

What book can be consulted for concepts like these?

@TonmoyMaity 10 ай бұрын

Actually these came from experience..

@user-oj3ew2of2b 9 ай бұрын

why should we give pin connection in the longitudinal?

@TonmoyMaity 9 ай бұрын

I'll try to put a video on this

@naseemahmad826 3 жыл бұрын

Sir what is sway and portal bracing?

@TonmoyMaity 3 жыл бұрын

I'll make video on it

@civilengineeringdzyn 2 жыл бұрын

sir when should we use bracing and when moment connection?

@TonmoyMaity 2 жыл бұрын

If you consider fixed support , use moment connection

@sasikumartherayil9620 3 жыл бұрын

Beautifully explained. Sur what about normal industeual structures trusses. How to fix the top bracing Bottom bracing Verixal bracing

@TonmoyMaity 3 жыл бұрын

I'll make video on it

@aditigore2149 2 жыл бұрын

Why is there a BGM for educational video.

@chandanadhikary8574 Жыл бұрын

Sir hidi me bolia

@TonmoyMaity Жыл бұрын

I am from Bengal : )

@YAKMAN796 2 жыл бұрын

This is wrong remove the video