What is Ceramic Coating?

What is Ceramic Coating? | Race Coatings

Рет қаралды 598,985

6 жыл бұрын

Ryan Parsons of Race Coatings gives us a demonstration of the ceramic coating heat treating process and the benefits in terms of performance and appearance. Ceramic coating can be applied to most types of metals and is available in a large section of colours and finishes. For more information check out www.racecoatings.com.au
If you’d like to be notified every time we upload a video, subscribe and then click the bell icon next to the subscription button.
#LSTHEWORLD tees now available
shop.fullboost.com.au/category...
www.fullBOOST.com.au
Get your track gear!
shop.fullboost.com.au
Support us on Patreon
/ fullboost
Follow us on social media @
Google+
plus.google.com/+fullboost
Facebook
/ fullboostcomau
KZfaq
/ fullboostcomau
Twitter
/ fullboostcomau
Instagram
/ fullboostcomau
COPYRIGHT WARNING:
The above video is copyrighted © to Fullboost
You do not have permission to download it and re-upload it anywhere in any form. You can click the share button on KZfaq for that, or copy/paste the URL to social media.
#ceramiccoating #powdercoating

Пікірлер: 698

@AlsAllAussieAdventures 6 жыл бұрын

You did my pacemaker extractors for my lsa in the black ceramic. Top work mate, love em!!

@AlsAllAussieAdventures 6 жыл бұрын

I am just paying the man a complement for his work..... Move along mate.

@fokjohnpainkiller 6 жыл бұрын

Erwin Acobe The fuck is wrong with you?

@roberthusk3402 5 жыл бұрын

LSA711 got contact info for this shop? I have an exhaust id like to get done

@smferreiro2610 5 жыл бұрын

@@roberthusk3402 www.fullboost.com.au/fb/index.php/2018/04/13/what-is-ceramic-coating-race-coatings/

@morteparla6926 6 жыл бұрын

Ever since I got ceramic coated headers on my Nova, they're the only kind of coating I use. No wrapping, no paints, no other coatings -- just ceramic coating. Keeps heat in the engine bay way down, it looks good, it lasts a long time, doesn't rust. For an idea, my Nova dropped 46°F under the hood after putting ceramic coated headers on. It's really worth the extra money.

@danielbrealey2924 6 жыл бұрын

That piston demo was a bit dodgy don't you think??? To start with he held the flame a lot further away with the coated pistons- away from the hottest part of the flame. Then the editing didn't allow you to see if he held the flame on as long as he did with the non- coated piston (although that may have been done on purpose). Next time someone tries this on, you might want to remind the person that your viewers aren't that silly and a shady demo will in tern make the product look shady. Disappointing- was hoping to see a fair and honest test to see how good it realty works. Think I might stick with the coatings available from the piston manufacturers for now...

@Sal-rh6mk 6 жыл бұрын

Daniel Brealey i saw that it was kinda bias. holding it further away on the coated pistons.

@rightwingsafetysquad9872 6 жыл бұрын

Holding it further away is actually making the test more difficult. It heats the piston more slowly giving more time for the heat to transfer to the bottom. It actually makes the coating more impressive.

@DC-yn1eb 6 жыл бұрын

It's because ir thermometers can't accurately read temps from reflective objects. The top was much reflective than the inside.

@Shoorit 5 жыл бұрын

Skirt on uncoated piston is different shape and looks coated to retain heat maybe? Definitely shady

@electricjelly_6938 5 жыл бұрын

Uncoated looked like steel while the coated ones are aluminum.

@toyotabrony 4 жыл бұрын

So adding more ceramic coats on internals, can give you more hp gains and torque because the heat resistant ceramic coat reduces the heat so dramatically. That’s actually impressive. I love this idea.

@tnoutlaw73 5 жыл бұрын

this video just exsplained every question I have ever had about coating. anyine besides myself see in the back ground at just how clean the whole shop is??? that tells 100% the pride taken in the whole shop.

@Harry-uo2cr 6 жыл бұрын

Tried to watch the video but my Ad blocked, blocked the whole video..

@AnthonySvt_ 6 жыл бұрын

Harry 😂😂😂

@mandelaeffect3521 6 жыл бұрын

Lol nice one

@dredrotten 5 жыл бұрын

Didn't do that for me, are you using Ad Block pro? I haven't seen an advert on YT for a few years now.

@emmanuelmeris5841 5 жыл бұрын

@@dredrotten ABP have a new plug-in called Sarcasm Stopper Pro. I can tell straight away that you are definitely not using it. You should really think about it. It'll absolutely reduce the number of times that you get suckered.

@dj4monie 5 жыл бұрын

@@emmanuelmeris5841 Right, so like I said coatings are useless for the average enthusiast just an extra cost that can be spent elsewhere. That is the general feeling most have about coating and other treatments. When professional teams need a tenth or two, these things will give them advantage. The same rule applies when it counts you'll be 1-2 tenths faster than your competition given everything is equal. But most people aren't competing for anything because they are scared they will break something. To finish first you must first finish, meaning cutting corners ensures you won't finish.... It's a choice, either do it or don't do it and STFU because it doesn't make you look any smarter by saying you won't do it.

@robertelee6712 6 жыл бұрын

This is a awesome video and very educational. You guys sold me on ceramic coating everything in my engine bay.

@chicohaze787 6 жыл бұрын

The piston demo had me impress on how it retained heat so well

@hokiepokie333_CicadaMykHyn 6 жыл бұрын

I accidentally ceramic coated my balls, and now I can't scratch them...

@emmanuelmeris5841 5 жыл бұрын

Can't wait until there is a butthole teflon coating. Imagine the long term savings?

@fasnuf 5 жыл бұрын

Don't worry mate, it'll flake off eventually!

@thepartsrunner5758 4 жыл бұрын

living proof the product actually works.

@alphafort 4 жыл бұрын

bwahahahahahaha!

@christurnblom4825 5 жыл бұрын

Nice demonstration and info. I have a goal to one day have a 70's American mussel car with a few modern but easy to work on personal touches but the plan is also to have a motor that is totally gone through and made to last forever. I'll definitely be considering that piston coating. Sounds like it will help the oil retain viscosity longer.

@carlosgavino6874 6 жыл бұрын

Very well demonstrated thank you for sharing this informative video im looking forward to having ceramic parts for my old truck

@starlord872 2 жыл бұрын

Thanks for this video!! You are the only one who actually show and explain ceramic coating and btw, your coating looks a million times better than all those KZfaqr clowns that ceramic coat their headers with spray cans!

@Emilthehun 6 жыл бұрын

Best video ever about coatings

@suzyjohnson4667 5 жыл бұрын

Awesome product and workmanship!

@michaelclanton1152 6 жыл бұрын

I would like to see a running engine exhaust temperature test with an EGT inside the pipe and a laser temp ouside to show how well the product works on keeping in heat.

@dj4monie 5 жыл бұрын

Been there, done that, go read MotoIQ ceramic coatings work.

@billyeminov5549 6 жыл бұрын

Absolutely amazing guys!!!

@Rlyeh_The_Dead 4 жыл бұрын

I'm now reading all of these comments in an Aussie accent...

@jimvogiatzis1384 6 жыл бұрын

very educational great video guys

@troymatthews668 6 жыл бұрын

When of the best videos Fullboost!

@vongdong10 6 жыл бұрын

Can you use exhaust wrap on ceramic coated headers or dumps? I've read that the excessive heat in the pipes can crack the coating.

@chrisgraf1304 3 жыл бұрын

Awesome content lads cheers!

@clay3865 5 жыл бұрын

So would it be possible to coat the valve stems to reduce friction and valveguide wear?

@denverdanoreno 5 жыл бұрын

Well done Sir, keep it running....cool! Dan From Fredericksburg, VA.

@myownidenity4955 5 жыл бұрын

I've done plenty of my guns first time seeing automotive ceracote . cool vid!

@kurtbarrett6785 4 жыл бұрын

Holy hell! I couldn't have been more wrong about the ceramic coating process! I always assumed it was an electrostatically applied powder, just like powder coating. I also figured it came out of the oven with a shiny finish... Or the quality of gloss would depend on the surface finish of the metal prior to coating. This was definitely educational!

@turnmaster1754 2 жыл бұрын

there are different type of ceramic coatings the coating they are using is cerakote or a copy of it i did some parts with this stuff a few years ago it good stuff i do my transmission cases and engines in cerakote c series air dry stuff.

@beggsyful 8 ай бұрын

@@turnmaster1754 just on that mate, is it ok to cerakote air cooled motorcycle engines? Cheers

@YEPIMONFISHING 4 жыл бұрын

100% on the powder.. i've been powdercoating for 24 years and i cringe every time some asks to have anything from the engine bay coated . I have talked hundreds out of doing it.. but some wont take "i recommend not doing it" for an answer. Nice video 👍👍👍

@elmeradams8781 6 ай бұрын

Why not powder coat engine parts?

@eriks5778 6 жыл бұрын

A few years ago I was rebuilding a tractor for the home farm, and just for shits and giggles, decided to have the pistons coated. Wasn't looking for better performance, just thought it might start better in the cold if the piston wasn't sinking away as much heat from compression. Now I didn't have a "control", and the engine was already badly in need of an overhaul, but it starts better than when it was new, and is still running well. So was I crazy for trying it?

@MrTheHillfolk 6 жыл бұрын

Erik S Nah, it’s good stuff, if I had a place closer to me that performed ceramic coatings I’d be doing it in anything I tore down. Those pistons are thanking you.

@CORZER0 5 жыл бұрын

Very nice! Looks like some really great work. If only it didn't cost $10,481.67 to ship my headers to you from Florida, you'd be coating them for me!

@patelpresident2972 4 жыл бұрын

Excellent video

@drrrrockzo 6 жыл бұрын

That's a really cool process and clearly has superior heat and wear resistance. But to be fair to powder coating for lower temperature cosmetic applications, the only solvents that I have affect it drastically (assuming proper preparation and curing) are methanol and dichloromethane (methylene chloride)...which happen to be the main components of powder stripper.

@mhamma6560 6 жыл бұрын

Indeed, way overboard on the whole engine Pistons, headers, turbo parts, sure. Low heat, stick with polished, chrome, or PC. Heck, even automotive paint and clear work well. If you're going "pretty" on an engine, it's not getting solvents on it. If you're a performance oriented only, you're not worrying about being pretty. Strict performance increases only.

@avrilcadabra 6 жыл бұрын

I've had ceramic coated headers on my car for couple years now, they don't stay looking so shiny. I got it done for the performance and under bonnet temps so thats ok but I do wonder about using ceramic coatings for engine dress up like valve covers. I imagine they would look pretty dull after time compared to polished alumnium or chrome.

@timsexton Жыл бұрын

The demonstration with the torch to the piston crown was quite amazing.

@thewrathofbibby3381 6 ай бұрын

did you see the distance of the torch on the 1st piston compared to the rest lmao

@timsexton 6 ай бұрын

Yeah, I did just look at the demonstration again, WTF, lol. The torch placement appeared further away to make their product present in better standing. The honest method would have items below ticked on a single video demo. -A tape measured jig -Three torches setup -Torch settings verified -Equal exposure time Just saying... *_TRUST !!_*

@danlordha 3 жыл бұрын

Nice work man... can you tell me what is the machines involved in all the process? I'm from Brazil and I'm thinking in create a factor like that here. Thanks a lot.

@boblee9849 6 жыл бұрын

it would be cool to see a ls motor with all of its part pistons turbo headers etc and see what difference the same ls motor but stock with the same turbo setup. and see the temp differences and power limit differences between the two.

@12salem 5 жыл бұрын

How long do you guarantee the coating on top of the piston lasts ? I had dart coatings do the tops of my pistons on a supercharged street application and 5k miles later theres no trace of coating left so I cant even tell when it flaked off

$@lovethesmellofracefuelinth7374$

@lovethesmellofracefuelinth7374 3 жыл бұрын

Saw a review of it recently on one of the top drag racing channels that I watch called demonology, together with the Kooks headers on his Dodge Demon. They were much cooler than normal and everyone is really impressed with jet hot, so I looked them up after watching the vid and says that its a product made by Kooks and is designed for the aerospace industry. One of my next mods is going to be a set of long tubes for my Challenger as well, and have been planning on going with Kooks. After hearing about it, I searched the web and the headers typically go for around 1200 to $1600. But then have to add around 350 for the coating. Although I found one for around $1,000, and am shocked that they are so inexpensive. They are the 1 3/4 instead of 1 7/8, but that is still dirt cheap for them. (Especially with the coating and is a bargain). I have the link if anyone is interested, and are for the 6.1 & 6.4 hemis only...mxamotorsports.com/product/jet-hot-headers-6-1-6-4l-hemi/

@troymatthews668 6 жыл бұрын

What sort of prices are we talking on piston coating?

@godfatheratlsu 2 жыл бұрын

At 8:38, you mentioned that the only product you can't do is magnesium. Can you elaborate why that's the case? I'm asking because I have a BMW motor build and there are certain components being magnesium alloys. And with an intent to spray on a heat dissipation ceramic coat, I'm a bit concerned that if that can't be applied, what other options I may look for. I'd still choose to use CeraKote as much as I can, though. Thanks for the informative video and demo, excellent work as always from FullBoost.

@paulf9459 5 жыл бұрын

If the headers and header pipe from the engine to the turbo is ceramic coated is it still worth while to wrap the same to aid in heat retention.?

@mattmiksch3587 4 жыл бұрын

Have you guys tested effects on power with the ceramic coated pistons? I'm very interested to see that.... Definitely seems plausible that power may increase....

@jaygooch1190 3 жыл бұрын

The coatings work. I've used them and you really have to retune the engine after applying them. Usually taking jet sizes out of the carb and the engine will run much cooler or I should say will take much longer to get to operating temp

@elmeradams8781 6 ай бұрын

I belive you, but who uses carbs and jets these days?

@GrayFoxGamingHD 6 жыл бұрын

Would this work on the a mazda rotary engine internals? They used something similar on their racing car 787b. Would this produce a simillar effect?

@gwadaflat 6 жыл бұрын

Hi , Technically, What advantage could I have that I have the engine of my motorcycle (bmw R1200GS) painted ( in black Color ) with this ceramic process? thank you 👍🏽

@cvsWebDesigns 5 жыл бұрын

how does the shine look after a year of use? any examples? I know the powder "chrome" looks like crap real quick if you don't coat with a clear, which reduces the luster anyway.

@3dprintwiz378 5 жыл бұрын

Can this be applied to plastic parts as well. Coz if you can apply it to plastics, then it can virtually increase it's heat resistance.

@hulkgqnissanpatrol6121 4 жыл бұрын

I can vouch 6 years and counting for turbo ceramic coating.

@chocolatte6157 6 жыл бұрын

I bought some aftermarket headers for my Ferrari 360 Spider, had them ceramic coated, wrapped them with exhaust wrap, covered them with blankets. The temperature of the engine bay dropped dramatically.

@godbluffvdgg 5 жыл бұрын

Nice Niche business...Good luck and success to you and yours!

@inox1ck 6 жыл бұрын

I have carbon soot coating, does that work? Something to keep carbon deposits off like teflon would be nice I think.

@darkfangulas 5 жыл бұрын

Looks awesome, do you need to skim it off the manifold faces where gaskets go ?

@hypnotik174 6 жыл бұрын

I'm skeptic because there was too many cuts in the video on the temperature test. Leading me to believe there was deliberate tampering.

@charlie2king 5 жыл бұрын

Wat? They get a heat reading of the top then flip it over and gets a heat reading of the bottom with heat gun in view you fucking tosser Wat the fuck are you talking about

@Glenneralen 4 жыл бұрын

Check distance between torch and piston on the stock/ non coated vs the coated.

@2JZ.S30 6 жыл бұрын

When you more than double the distance of the flame, on the coated pistons, it doesn't look good, and is misleading... ceramic coating works, no need to exaggerate the results.... lol

@sarg348 6 жыл бұрын

Boosted01R the 2 coated pistons are different from the uncoated one too. 100% agree it is a proven process no need to make it look better then it is

@phoenixrising7047 6 жыл бұрын

Wasnt real scientific was he? Yeah we believe you mate, no need to see it done. Show us the black stuff on the rag and quickly hide anything wiped from the ceramic. Like one of those late night infomercials it reminded me of. I'm sure it works but as far as demo's go - lil bit dodgy.

@jonsimmons4150 6 жыл бұрын

don't dick about- if you are serious just send the parts here www.wallworkht.co.uk/ with what you want doing. no backyard stuff.

@MeganChic 6 жыл бұрын

Looked like he heated the uncoated piston for a lot longer then the coated pistons.

@ArodPR 6 жыл бұрын

lol still some people will believe the exaggerated results

@williamclark6641 5 жыл бұрын

Would the the piston not need coated on the walls as well due to heat transfer from the bore and rings as it goes up and down?

@negueba235689 2 жыл бұрын

Question: When you coat engine parts or engine blocks. That's aluminium ect. The parts or the engine loses its ability to release heat? I did see a video of a intake manifold coated vs not. 30min cool down time the coated part was 50c+ abow the non coated.

@omaraki01 5 жыл бұрын

towards the end you folks showed the entire motor being ceramic coated, what would be the benefits for the cylinder head and block coated? thanks

@mandelaeffect3521 6 жыл бұрын

That's awesome bro.. this coating on a diesel piston would stop the piston from melting I hope

@Cheeseypoofs85 6 жыл бұрын

Does the Piston coating alter the compression ratio or is it too thin to make a difference?

@steikio1 3 жыл бұрын

Is it possible to ceramic coat a header pipe so it comes out in a high gloss black? or would it just be non gloss?

@moonlander03 2 ай бұрын

That’s sick !!!

@williamdavis3748 6 жыл бұрын

So with the ceramic coatings this raises combustion chamber Heats or dissipated through other metals around it?

@TheFootbaldd 6 жыл бұрын

They reduce heat lost into the cooling system, and increase cylinder temperature and pressure.

@WireWeHere 5 жыл бұрын

Have you thought to use a pair of type K thermocouples and digital displays for your demonstration? A side by side comparison with the same flame heating both to confirm you have a well matched pair of TC's then ceramic coat one and test the pair again. A 1/4" x 3" SST TC probe with a nicely rounded tip should take your coating without any sharp edges to worry about. Just a thought while I'm sitting here with a pair of Omron E5CK temperature controllers in front of me for inspiration. I've tried 8 thermocouples with excellent results, unfortunately they're all naked virgin TC's. Would be nice to see some solid numbers to go with your interesting and excellent looking coating. I'm considering ceramic for expansion chambers on chainsaws and dirt bikes. Thanks for the video. Good day.

@danw8012 5 жыл бұрын

Reading the comments I'd like to see you do another video to do like a mythbusters episode to disprove some of what I see. I work in a lab. Putting the blowtorch on a stand for the same time on each piston to ensure the test is the same for each piston. Then measuring each temp at timed intervals over a long period of time you could create a graph to show what's going on. There are many variables that need to be sorted out aswell but I'm not going into it now. I was a powdercoater for years and ceramic is a far better product as powdercoating is just plastic really. Could you do a chip and scratch test aswell.

@zAvAvAz Жыл бұрын

what do you use for the teflon coatings? i am looking for the strongest wear resistance coating, i don't care what it is

@sexyfacenation 6 жыл бұрын

Hold the flame further away for more science.

@7071t6 6 жыл бұрын

I would put the flame on the inside of the piston and check the temp on the outside see if there's any consistency doing it that way ?

@DavidD1794 5 жыл бұрын

😂😂😂

@mosteller1953 3 жыл бұрын

If done to engine case internals/pistons, how much higher of a temperature can it handle?

@ronniepirtlejr2606 6 жыл бұрын

Crazy awesome cool!!! I would love to have my engine coated with that!!!

@MrBooshScadoosh 5 жыл бұрын

Having the piston absorb heat will keep combustion temps lower though? It will move heat away from the combustion chamber. Keeping all the heat above the piston will send it into the valves, am i wrong

@MyMomSayNoDota 5 жыл бұрын

how your customer send their parts to you? already disassembled or you do it for them and then rebuild by you?

@torentmonkey 5 жыл бұрын

On the piston coatings... how do you account for the different thermal expansion rates? If you keep the piston at a lower temp during operation this means it's not reaching it's full size inside the skirt.. compression, etc ?

@elmeradams8781 6 ай бұрын

It must just stick. Maybe it flexes?

@dredrotten 5 жыл бұрын

I saw a guy using a supposed ceramic coating on his car bodywork in the USA! Its only silicon in a bottle by the looks but its selling for up to $USD4,300 for a 200ml bottle in a fancy box!

@thepartsrunner5758 4 жыл бұрын

I would like to ceramic coat a Harley exhaust. The effect I would like to achieve is what a cadmium plated nut or bolt looks like (a dull gold multi color) Is there a way to achieve this color? Thank you and best regards.

@markjmaxwell9819 4 жыл бұрын

Would definitely do my header or extractors. The benefits of the piston coatings and other engine part coatings would have to be tested in a lab. Good job. 😈😈😈😈

@kym393 4 жыл бұрын

I had my frypan done, looks great but now It won't cook anything

@pokegaiyui 5 жыл бұрын

Thermodynamic question, so if the Piston is taking less heat, does that mean the engine will run more efficiently as the fuel is burned and more of the energy pushed and exited through exhaust? Since the heat has to go somewhere?

@fvckthemkids 4 жыл бұрын

What is the giant tumbler you guys use to polish the parts before hand

@berniecruz8405 6 жыл бұрын

Question... I can see how coating a piston head helps with heat dissipation, but how much will coating a piston head or perhaps even an intake and exhaust valve help with the carbon build up, which also gets baked on, which occurs from blow-by? Has this been considered and tested as well? Can the coating help reduce or even prevent baked on carbon deposits on these components? Due to emission regulations, the blow-by will always get sent back into the PCV/EGR systems to have the blow-by burnt off, but will the coating stop carbon after product from accumulating on the pistons and intake\exhaust valves as well?

@elmeradams8781 6 ай бұрын

Carbon isn't usually that big of problem. It can be burnt off, or chemically taken off. But with gasoline direct injection, the carbon buildup from the pcv is way worse. Maybe coating is the way to go.

@dutchylt Жыл бұрын

Can you ceramic coat the inside of a turbocharger turbine housing or only the outside? And what benefit is to be had? Cheers.

@TripleRotarRacing 6 жыл бұрын

Curious to know how much of a difference the piston material makes to the conductivity of temperature, the uncoated one looks to be oem, whereas the other 2 are aftermarket and probably not made from the same metal.

@jonsimmons4150 6 жыл бұрын

get yer rotors done here www.wallworkht.co.uk/

@danielbrealey2924 6 жыл бұрын

Your up and down this whole page advertising this shop. Do you work for them or something??? There are plenty of reputable shops doing it here in Aust- why would someone ship their stuff half way around the world to get done what could be achieved in their own country

@jonsimmons4150 6 жыл бұрын

no. not at all. i read through articles and subjects that are of my interest and see the videos. then see that some people think they can do in a small outfit what you need 100k worth of equipment to do. to do pistons they should be treated under a vacuum with a plasma spray. i didnt know that until a few years ago when i visited a company completely by chance and they make the equipment to do specialist coatings and ceramic coatings. i spoke to a engineer who was building up some equipment that looked like it was from star trek or back to the future to do specialist coatings and it was to be sent to the USA. i would love to think that i could do a quality ceramic coating on pistons for cheap and it wouldnt burn off or flake off after a very short while. funny i never heard about paint on ceramic coatings when i worked in aerospace- usually parts would be sent away to specialist companys with expensive equipment and knowledge to get it right. plenty of snake oil salesmen around. hardly any manufacturing or specialist companys doing anything remotely technical or scientific in australia. no car manufacturing, anything more technical than a nut and bolt is imported.i just wonder where the cutting edge technology is in australia.

@boblast5582 6 жыл бұрын

you guys should do the blow torch test on the headers

@raymondj8768 6 жыл бұрын

wow i wish they had that stuff when i was drag racing !!!!

@roberthamilton1152 5 жыл бұрын

What is/ how much of a difference is there between ceramic coated interior vs. polished interior?

@Visionery1 5 жыл бұрын

Interesting! The first law of thermodynamics, also known as Law of Conservation of Energy, states that energy can neither be created nor destroyed; energy can only be transferred or changed from one form to another. This raises an issue or two, not allowed for in the original engine design: during normal combustion the heat which would've been absorbed by the piston and transferred to the connecting rod and engine oil now remains above the piston, increasing the heat of the combustion chamber, valves and cylinder head cooling galleries. I see potential pre-ignition, overheating cylinder heads and overheating exhaust valves.

@ridingwithiceman4683 6 жыл бұрын

hi, whats the best colour to use on the exhaust headers to get the best performance

@earlcousins6635 3 жыл бұрын

How are you able to bead blast the entire nside a header - end to end? Thanks

@truthbtold2919 5 жыл бұрын

But does it hold the heat longer inside the engine where all the heat is produced? Do they do the inside of the engine?

@simmonspilot 3 жыл бұрын

What is the silver aluminum Catania color used on the front part of that LS motor! I need that color for my motorcycle engine.

@dufus2273 5 жыл бұрын

my hooker headers were very shiny when new . Now after a few years of use, they have lost that shiny chrome look. how can I renew that chrome look? they were ceramic coated. is there a polish or cleaner I ca use. they are off the car for a short while.

@djkalk1969 Жыл бұрын

What's the temp on the coated pistons when you hold the torch close like you did the uncoated one?

@johnvall5809 6 жыл бұрын

I agree with many comments before me ceramic coating definitely works but the heat test performed in this video is not an Apple to Apple comparison first the piston heads were not the same so that may of have help make the difference even more noticeable and the torch distance was not at the same distance when heating up the piston head without the coating it was closer and distributed to the entire piston unlike the ceramic coated heads

@dj4monie 5 жыл бұрын

So? If you know coatings work then flawed testing means nothing but only an example of typically happens inside any engine not EXACTLY like it happens. Only F1 teams know what's going on inside an engine, everybody else is just guessing at it.

@absolutepressur 6 жыл бұрын

It's literally impossible for the top to be cooler than the bottom when heating from the top. The reflectivity and emissivity were messing with your meter.

@Mrbfgray 5 жыл бұрын

Exactly, this method of temp measurement is wildly inaccurate between shiny and flat black.

@chrisburnsed6349 5 жыл бұрын

absolutepressur , yep this guys full of shit !!

@johnboforsyth5970 5 жыл бұрын

just another fucking gimmick. its like a pray on tan.

@casemodder89 3 жыл бұрын

That is all this test is about. Fuvking ppl. Over with the emissivity of surfaces.

@FC3STurbo 6 жыл бұрын

What would cause ceramic coating to start to peel off? I got my dump pipe and rear housing done and now it’s cracking and peeing off? :(

@jonsimmons4150 6 жыл бұрын

you didnt go to the pros. you cant back yard bodge hi tech. www.wallworkht.co.uk/content/group-video/

@patrickc1508 4 жыл бұрын

I would blame the surface prep. Not getting it clean enough, or not blasting it correctly.

@2000freefuel 5 жыл бұрын

can your ceramic coating be applied to piston sleeves?

@steveherbig9069 5 жыл бұрын

Is there any benefit to doing the inside of a quadrajet?

@ShinySideOut 5 жыл бұрын

do you coat m90 rotors?

@CamiloMartinezAldaya 5 жыл бұрын

I'd love to know how they managed to bend the laws of thermodynamics and have the down side from the piston, wich is farther from the heat source, at a higher temperature than the top side that it's facing the flame itself.

@chippyjohn1 2 жыл бұрын

Exactly. It's BS video. Just a scam.

@josepeixoto3384 5 жыл бұрын

I thought it was a few mm thick; that is like a hi-temp spray paint that would bake on,won't do much to reduce the heat radiating out.And the pistons,you might as well make the mixture rich for a few minutes,to coat the top of the pistons,and pipes, with carbon black.

@STOLerant 2 жыл бұрын

What is the difference between this method and Cerakote ambient temp application as far as functionality?

@daverhodes7235 6 жыл бұрын

Hmm. Any long term testing in salt water marine Diesel engines? How would it hold up? Lower heat in the engine room?

@dethkon2284 6 жыл бұрын

Can i line cylinder walls with your coating?

@Rockyo1 2 жыл бұрын

I sent my vance and hines comp series exhaust to hpc Leongatha, and they damaged my headers and now i cant refit them and vance and hines dont make them no more , and when i called to find out why my exhaust was damaged he couldnt tell me how or why and didnt offer a refund or replace or fix pipe !???