What’s That Noise in My Differential?

Рет қаралды 912,724

3 жыл бұрын

This video chronicles what I went through to diagnose a whining noise coming from the 10 bolt (8.5” 30 spline) differential of my 1990 C1500 truck (GMT400/OBS). The noise has been there ever since I installed a new carrier and gears last year.
I cover checking backlash, measuring pinion depth, bearing inspection, gear tooth patterns, and fluid inspection.
I hope you find this information useful!
#ETCGVideo #ETCGDadsTruck
My Patreon Account: / ericthecarguy
The best place for answers to your automotive questions: www.ericthecarguy.com
Check out the ETCG Blog for the latest info: www.ericthecarguy.com/blog
Check out my ETCG1 channel: kzfaq.info?su...
Thanks for watching!
Links
Summit Racing: www.summitracing.com
More info on noise diagnosis: www.ericthecarguy.com/diagnos...
Diagnosing Ring and Pinion Issues: www.onallcylinders.com/2014/0...
Tools
Pinion Depth Measuring Tool: www.raceplumbing.net/TD-Machi...
Dial Indicator Set (Checking Backlash): www.jbtoolsales.com/central-t...
Bleepin Jeep Pinion Tool: store.bleepinjeep.com/product...
Astro Pneumatic Bushing/Seal Driver Kit: www.jbtoolsales.com/astro-pne...
Milwaukee 1/2” (the big one): milwaukeetool.com/Products/Po...
1/2” Breaker Bar: www.jbtoolsales.com/k-tool-23...
Torque Wrench: www.rakuten.com/prod/282405511...
Part Links
My Differential: www.summitracing.com/parts/au...
My 3:73 Gear Set (Original): www.summitracing.com/parts/su...
New Gear Set (Richmond): www.summitracing.com/parts/rm...
My Differential Cover: www.summitracing.com/parts/sm...
Ratech Ring and Pinion Installation Kit: www.summitracing.com/parts/ra...
Pinion Bearing Set: www.randysworldwide.com/produ...
Related Videos
How To Use a Pinion Depth Measuring Tool: • How To Use a Pinion De...
#ETCGDadsTruck Axle/Differential Rebuild (Part 1): • #ETCGDadsTruck Axle/Di...
#ETCGDadsTruck Axle/Differential Rebuild (Part 2): • #ETCGDadsTruck Axle/Di...
Last Minute Prep and Problems #ETCGDadsTruck: • Last Minute Prep and P...
Introduction to #ETCGDadsTruck Build (Episode 1): • #ETCGDadsTruck Build I...
#ETCGDadsTruck 4” Rear Suspension Drop (Part 1) (Episode 3): • #ETCGDadsTruck 4” Rear...
#ETCGDadsTruck 4” Rear Suspension Drop (Part 2) (Episode 4): • #ETCGDadsTruck 4” Rear...
#ETCGDadsTruck Playlist: • #ETCGDadsTruck Build I...
The FairmontProject Playlist: • ETCG Gets a New Car! -...
**Answers to your automotive questions found here: www.ericthecarguy.com/faq
Social Network Links
Facebook: EricTheCarGu...
Twitter: / ericthecarguy
Instagram: / ericthecarguy
Wanna see more stuff like this from ETCG? Information on Premium Membership: www.ericthecarguy.com/premium...
Stay Dirty
ETCG
Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy®.

Пікірлер: 904

@labradormcgraw 3 жыл бұрын

There's always a certain 'family' feel to ETCG's videos. The familiarity of his style makes us feel as though we're coming home to an old friend - a rare gift indeed. That's all before you get into the tuition, which is still - by a clear country mile - the best on KZfaq. Long live ETCG!

@ericthecarguy 3 жыл бұрын

Thank you!

@BillyRamirez 3 жыл бұрын

It feels like we’re hanging out at his shop

@tonyburts7998 3 жыл бұрын

@@ericthecarguy where are you finding that pinion bearing preload should be 20-25 in lbs. All I’m finding is that it should be 14-17lbs. I’m chasing the same problem you had in my 05 Silverado. I think that I’m going to contact my gear distributor and see what they say.

@wshazbot62 3 жыл бұрын

@@tonyburts7998 this sound is the same thing my 09 Silverado is making. Makes me wonder if the shop I’m waiting for an appointment to take it too, is going to figure out the problem. Odd things always happens to me 😔, just hope it doesn’t cost me a fortune. I’m a disabled mom 58 yrs old, but was married to a mechanic for many years. So I always look for help, he’s now passed away. So I have no help, why I’m here

@redwaller1 Жыл бұрын

@@tonyburts7998 I read in my manual for my Ford that the target preload should change depending on if you're trying to re-use bearings and crush sleeves. lower values for re-use.

@AndrewBrowner 3 жыл бұрын

the fix was right in front of you the entire time.. more volume on that radio!!

@louiswhetsell1144 3 жыл бұрын

Lol

@AndrewBrowner 3 жыл бұрын

@@louiswhetsell1144 thanks for your input.....

@hunterlogan2913 3 жыл бұрын

until one day... and with luck the wrong day...

@arielbonilla1623 2 жыл бұрын

Bro wth 🤣

@michaelcrider8413 2 жыл бұрын

🤘

@jwstanley2645 3 жыл бұрын

I am so glad to see that even someone who knows as much as you, and with all your tools and experience, gets frustrated from time to time trying to figure it out. So, here's to you!

@ericthecarguy 3 жыл бұрын

Anyone who says they don't is likely stretching the truth.

@Salmon_Rush_Die 3 жыл бұрын

Why are you glad someone is getting frustrated? lol misery loves company. I always end up doing everything three times to get it right, & then I realize I did the wrong thing after all.

@myvideotablemyvideotable528 3 жыл бұрын

After finding everything ok with my transfer case. i was going to open up the rear diff for diagnosing the shuddering in my 4wd. Well, after seeing this video, i guess i d rather leave it alone.

@jwstanley2645 3 жыл бұрын

@@Salmon_Rush_Die Knowing that even Eric gets frustrated helps me feel one tiny bit less stupid, after I stop cursing.

@rayhat5111 3 жыл бұрын

This is one of the best vids I’ve seen on auto repair. You’re skills and tool set are beyond the average home mechanic. This is no shade tree project. I understood everything you described so accurately, and have been at the end of a job to find out that wasn’t the fix. I would have lived with the noise after the first tear down. Outstanding job. I’m a subscriber now. Thank you.

@tona6g72 3 жыл бұрын

Eric, I've been watching you for over a decade now. I am absolutely blown away with patient you are. You have a gift my friend. Wow! We can all learn from you in so many ways other than just auto mechanics.

@ericthecarguy 3 жыл бұрын

Meh, it's all in the editing. Thanks for watching!

@billmillican3747 2 жыл бұрын

I can't begin to tell you how much I've struggled with the same thing. Especially with pinion depth, damaging the inner bearing while taking it off to re-shim. I appreciate your videos.

@cheesemons 3 жыл бұрын

Great to know you figured out the problem. That's one less thing on your mind to worry about and that's one more things that we learn! Thanks for your effort.

@johnfink5060 2 жыл бұрын

I have been watching Eric's videos for a number of years. I enjoy his videos because he is thorough, careful, and offers good advice. The way he shoots his videos and talks is very good. Kind of a comforting way of speaking is what he does. I used to be an auto mechanic from the tail end of the 70s and through the 80s and 90s before I hung it up. Eric has good methods on how he does his repairs. He is a good mechanic. He has been very helpful during the years when I used fix my kids cars. Oh the things kids can do to their cars! Good job Eric.

@pv2smurf 3 жыл бұрын

That moment when you want to walk away and you realize...."this thing ain't going to beat me that easy". Then you take a moment and decide "it's getting fixed, regardless if "it" knows that or not. Love this setup of videos. Strongly encourage more like this!

@ericthecarguy 3 жыл бұрын

Thank you! Glad you like them.

@tomcardale5596 3 жыл бұрын

I've had a very similar issue with my rear diff after swapping it out for an ATB one. It's loud at 70mph driving along a flat road, quiet when accelerating, decelerating or going up a hill. If it's under heavy load it's quiet. This video has confirmed my suspicion that I'm likely to leave it alone!

@Fir3Chi3f 3 жыл бұрын

I appreciate you posting these videos where things haven't gone quite right. Thanks Eric!

@dreednlb 3 жыл бұрын

Yep, I just went through this. I paid an "expert" to install a new to me used diff in my diff housing so he could check backlash, etc. It was noisy. Then I took it back to him a second time and he said it wasn't my diff making the noise, it was the transmission. I paid to have my transmission replaced with another (used) transmission. It still made noise. I spent quite a bit of time researching the issues myself, purchased all new bearing for the diff and assembled it all myself this time. It's quiet now!

@mubashircheentavida 2 жыл бұрын

Ugh pretty sure I'm in the same situation, guy told me it was the trans but I'm like 90% sure it isn't but at the time I didn't know.

@garychandler4296 2 ай бұрын

A mechanics stethoscope can save you a lotta money plus warn you of upcoming failures!

@DDescalchuk57 3 жыл бұрын

From my experience majority of acceleration and deceleration noise is ring and pinion. Usually on worn out gear sets or improperly installed gear sets. Couple thou. Makes all the difference sometimes. Bearing noise is usually constant.. if you ever hear a mechanic say they don’t ever make mistakes they’re full of shit. We all do, great video

@darrellhughes6773 2 жыл бұрын

My 96 SS Impala is making d same noise think it's d same problem he's having??

@frankpaya690 2 жыл бұрын

Maybe the mechanic didn't make a mistake but his parents did?

@williamtoon6021 2 жыл бұрын

I was curious about the torque spec not being right. It wasnt just a little òff, it was quite a bit under. Jus' sayin...

@mikebaz7843 Жыл бұрын

I ruined a pinion bearing after a clutch dump as it was only noisy on acceleration, replaced it and it's still silent years later. Carrier bearings will give you constant rumbling though

@V28KINSA 3 жыл бұрын

I hope this video was helpful? God bless you Eric! You really solve much doubt about differential...

@CalloftheCrow 2 жыл бұрын

Great video man. I respect a man that can reveal hurdles of troubleshooting and not be prideful.

@Steff320i 3 жыл бұрын

The technical quality of yor videos has become so good. Excellent lighting, sound + editing. Thanks for sharing.

@Mo-sf7wc 3 жыл бұрын

Hey Eric, I appreciate how open you are and with your experience that you are not afraid to be honest when having an issue or troubles. Something I wasn't sure if you checked but I had this exact same issue with a Silverado. Done plenty of rear ends before never had an issue however one Silverado I did kicked my butt. I had that thing out a million times it felt like. Long story short my preload on the carrier was the issue. I think that may have been your issue too because you mentioned you ended up using the factory shims in the Richmond set up. Long story short I did what you originally did and measured my old preload and stacked shims to obtain the same. Turns out a little bit of fluid/dust between the shims gave me a false reading of more preload. What I ended up doing was cleaning the shims in acetone and measured then separately. I wrote down the measurements and played them out. Than I added off of those figures vs stacking and than seeing how thick they were. I did it each time I took it down until I got the right combo to get the gear lash I wanted. That solves my issue. My theory is my preload was a little loose and that ultimately would cause the ring gear to move away from the pinion on decel which caused the exact same noise. I've never had to go to that detail/trouble before with any other build since. Makes me think the Chevy 8.5/8.6 are just sensitive. I could be wrong but that's my theory. Anyways how is your dad's truck doing? Been a while since we've seen an update on that.

@emasbury 3 жыл бұрын

Eric, I have this annoying noise coming from my passenger seat of my 2015 Chevy Silverado, but I have found out that is goes away when I leave my wife at home. Can you help? :)

@russlehman2070 3 жыл бұрын

Well, if you absolutely can't convince your wife not to ride along, duct tape can work wonders. Disclaimer: I take no responsibility for what your wife does do you after you apply the duct tape.

@Fuaarrkk 3 жыл бұрын

Divorce

@chevrolot06 3 жыл бұрын

I try try ty

@FortniteZombiekiller 3 жыл бұрын

@@russlehman2070 duck tape fixes everything

@DuckOff691 3 жыл бұрын

Dont have this issue on mine. Made damn sure of that!

@shellyshell311 6 ай бұрын

Thanks for this video. I have the same noise with my Mustang as I hear in the beginning of this video, and the same issue of it increasing with deceleration. Was contemplating doing it myself until I watched all the tools and knowledge required. Am so proud of you for your persistence and payoff, you're so inspiring and easy to learn from. I love your axle cam! 😄 Thanks for enlightening my evening and at the very least giving me the assurance, that, yes, that noise is in the differential.

@davidlanghoff 2 жыл бұрын

I admire your tenacity and technical skills. Always a learning experience watching your videos. Thank you very much.

@bizzybcarm.d.7828 3 жыл бұрын

Very informative as always! I've never been confident setting up rear and this is why haha

@carsandcoffee4546 2 жыл бұрын

Here a little tip for ya, when you're doing axel bearings, don't soak them in gear oil and install them. I probably sound nuts, but use assembly lube. Reason being is because, if you soak them in gear oil, nine times out of ten by the time you get it back together. All the gear oil is gonna be ran off and when you go to drive it you're gonna be running the bearings dry. I've burnt up I don't even know how many bearings like that because of that reason. I started using assembly lube and I haven't had a issue since.

@arth.4196 3 жыл бұрын

I have been watching you for so long I learned a lot. A craftsman like you just shows how easy it is to do what you do. If a person really wants to learn a Trade. I have learned a lot. I took an ASE test and passed it for Brake and Suspension Certification. Keep on doing what you do. Thanks

@ericthecarguy 3 жыл бұрын

Thank you, and congratulations on passing your ASE test!

@geoffreyplagnieux7517 3 жыл бұрын

Hi Eric, I'm from France and I have exactly the same problem on my 1998 Chevy Tahoe. Your video was very helpful and permits to me to gain a lot of time. Nearby 2 years ago I've rebuilt my rear diff I've changed all the bearings, my mesures were very accurate, and my pattern was very nice. But since 6 monthes I've the same noise on my rear end. As you, I Thought that is was comming from pinion bearings, and it has to be my first step to check where does it comes from, I thougt too that it could came from the gears themselves... and that is it! Thanks for all!

@Rook101 3 жыл бұрын

Wish I had this video as an introduction when I tried my first dif rebuild. Well done Eric.

@the_cheese 3 жыл бұрын

From my training working in a bearing shop, it is a bad idea to replace a cone but not the cups in a tapered roller bearing. The races can have microscopic pits or grooves that will cause the rollers to hammer and degrade the bearing at a significantly faster rate than a new cup and cone. Glad you got that sorted out, Eric!!

@Redlinecarcare 3 жыл бұрын

Great man,great display of patience and not giving up, you are blessed with a great gift and knowledge,and it is trait to share knowledge

@LesSummer 3 жыл бұрын

Well you definitely did what you could do to the best of your ability. I’m inspired by the dedication you gave to fixing it. Kudos to you!

@richu27 3 жыл бұрын

Eric: I am closing this chapter for now. Also Eric: *with disassembled differential* this is where I am now.😂

@ericthecarguy 3 жыл бұрын

Take a break, get some food, get some rest, and start fresh tomorrow. Good luck!

@frankpaya690 2 жыл бұрын

@@ericthecarguy How about go around the shop and pick- up the tools and parts ?

@billyleedee 3 жыл бұрын

I’m on your side about prior setups. Seemed reasonable. Two years ago I rebuilt my diff with the identical Richmond set, and it’s behaved well. Hope the same with yours..

@CedarPass 3 жыл бұрын

One of your best videos, Eric. Good work / great explanations.

@fabricancustoms 3 жыл бұрын

My friend is having the same issue on his '90 Mercedes E300. I'm glad you are so thorough, because the diff rebuild video and this one will help him out a lot. Thanks, Eric

@ericthecarguy 3 жыл бұрын

If you can, find one of those pinion depth tools. Extremely helpful. Linked in the description.

@krawlr 3 жыл бұрын

I use the Yukon "super carrier shim kit" and "crush sleeve eliminator" whenever I can on gear installs. You can dial that backlash in where you want. (yes I prefer the tight end of the spec) And no more finger crossing while setting pinion preload.

@CameronPinto 3 жыл бұрын

Learned a bunch. Thank you!

@hisagisan Жыл бұрын

Your videos are awesome. Your out loud self talk is super valuable

@dueyshaw3023 3 жыл бұрын

Going thru a 2001 Silverado rear end right now. It is the open rear end and the smaller bevel gears both had most of the teeth breaking off the outer edge. Your video was a big help in what to look for and what to expect. Thanks

@MechanicMindset 3 жыл бұрын

So clean under there!!👌

@paulskystoneadventures 3 жыл бұрын

If your carrier dropped out it probably was not preloaded properly resulting in too much pinion backlash under load which would cause noisy gears. Those two big holes on each side of housing are for a carrier spread tool to remove carrier assembly. You spread the housing with your dial indicator very carefully to not over spread. This is what preloades this style of diff. Use a long bar after carrier is installed to pry on carrier with dial gauge set to get zero end play and then add proper amount of side shims to get carrier side bearings preloaded.

@jwbranham2009 4 ай бұрын

I appreciate your video and the honesty of your presentation. I like the detail and efforts to make sure we can see the important aspects. My grandfather would say to me there may not be enough time to do the job right the first time but always time to do the job over.

@1BarryMoore 2 жыл бұрын

Thanks again and your attempts at objectively! New tools, new measurements, oil, parts, and installation, etc.

@megaglowz8540 3 жыл бұрын

The mechanics shanty. What’s That Noise in My Differential? What’s That Noise in My Differential? What’s That Noise in My Differential? Early in the morning!

@hornetkeeperh 3 жыл бұрын

Wife comes in, says I smell of oil Wife comes in, says I smell of oil Wife comes in, says I smell of oil, Early in the Mornin

@kiellivingston7100 3 жыл бұрын

@@hornetkeeperh Wife says come to bed, it's midnight, Wife says come to bed, it's midnight, Wife says come to bed, it's midnight, Early in the morning!

@the_cheese 3 жыл бұрын

Are you sure that clamp is tight Sure I'm sure that clamp is tight I'll swab that coolant up just right early in the morning!

@jaimejay6056 3 жыл бұрын

That's tenacity

@greenteagod 3 жыл бұрын

"Differential fluid is one of my favorite smells" until you said "Not" I was just stunned. I mean putrid rotting skunk sprayed onions would probably be more pleasant than that stuff. Ick.

@Jakek200 3 жыл бұрын

Some GM AcDelco fluid smells like Grapes... Yes really, its scented. You can still pick up a little whiff of the normal gear oil smell under the grape smell though.

@jcnlala9461 2 жыл бұрын

I have a Ram 1500 and it has this same noise. It just started noticing it. I'm glad I came across this video.

@thhall459 3 жыл бұрын

I will never disassemble or work on a differential. Having said that, I couldn’t wait to watch you do it and I couldn’t stop until I saw it all the way through to the end! I like what one of the other commentators said about you having a familiar family friend charm! That’s a very apt description of your style.

@ericthecarguy 3 жыл бұрын

Thank you!

@jeremymoran5123 3 жыл бұрын

Eric, I think your problem might be in the excessive backlash. Every time I built a rear end I’d always shoot to get the backlash within the manufacture specs.. Typically if you could hit the within the specs. you were on the money. Great video as always, thank you sir from Oklahoma 🤠

@AnonymousAlcoholic772 3 жыл бұрын

Haha, just discovered this dude has his shop 7 miles from my house. Passed it the other day. Small world. Im in Reading lol

@fatkat311 3 жыл бұрын

Wow.. I never knew that. I live a few exits up from his shop just off 275. Never knew he was in Cincinnati

@leonardcherry1314 3 жыл бұрын

Lucky bass

@caseygunn9627 3 жыл бұрын

It's nice to see you learning.

@michaelfawver3436 3 жыл бұрын

Awesome video. Glade you found your conclusion. Great learning video. I will come back at latter date to watch full version.

@jockosboy17 3 жыл бұрын

I had the same issue after going from 3.08 to 3.73 with the same diff but in a Tahoe. It was ultimately better after replacing all the bearings a couple times and setting it all to spec but never solved. I traded it off...

@jeffkelley3419 3 жыл бұрын

Sorry to hear it. I hope you have a better truck, now.

@jockosboy17 3 жыл бұрын

@Nick J What was I suppose to do with it?... Keep it forever? NO. I traded it to a GM dealer who has the capability to correctly solve the issue.

@80sfordguy 3 жыл бұрын

Great video Eric, though no matter what gear lube you use, even with perfect gear tooth pattern, pinion bearing preload, carrier bearing preload and gear backlash there will always be a slight gear wine on deceleration. It’s normal...... Now that your differential is broken in, readjust your backlash to within the Factory or Gear Manufacturers 0.005” - 0.009” spec and try getting it within the preferred spec which is likely 0.006” - 0.008”. Personally, anything gear backlash between the tight 0.005” and midway point of 0.007” on a GM 10 bolt is good and you’ll still have slight gear wine on deceleration!!! Run it for 500 miles then change your gear lube to remove any wear deposits and go from there with fresh quality 80W-90 or 85W-140 (viscosity is dependent on the temperatures you drive in) synthetic gear lube with LSD additive (4oz is common) if you have a Limited-Slip Differential. I think Eric has just proven that you never mismatch new bearings with old bearing races is not a good idea. Plus, if your gear teeth have any chips, it may cause noise even if everything setup correctly. Also all differentials have a lube oil change interval like other oil change intervals your vehicle needs as maintenance.

@jeffkelley3419 3 жыл бұрын

I agree. He should run his truck for a few hundred miles, drain the old oil, and readjust tolerances. It's sad that he will have to drain the synthetic oil. However, he'll be happier in the long run. Sorry, Eric. Easy one for you.

@frankpaya690 2 жыл бұрын

@@jeffkelley3419 You really think it was necessary like he did, when he was trying to figure out what was wrong, to dump the new oil when it was brand new and in a broken in assembly and all he did was test drive it?

@williamtoon6021 2 жыл бұрын

Both of the gears had chips in them. Spinning at thousands of rpm, out of balance parts are likely to "sing". Thats what ive been taught.

@Retired70 3 жыл бұрын

Patience is golden. Good job

@hemp6956 3 жыл бұрын

Thanks for the videos, brother. Even though most don't pertain to my vehicles, they're informative and enjoyable.

@ericthecarguy 3 жыл бұрын

Thank you for watching!

@josh33025 3 жыл бұрын

I had a rear end that sounded like you were banging on the frame with a hammer every rotation it made. I didn't take it apart to see what was wrong I just replaced it with a junkyard one.

@Erik_Swiger 3 жыл бұрын

"Well that was easy enough" said no car mechanic ever except ERICTHECARGUY

@jeffkelley3419 3 жыл бұрын

'bout right!

@bradrolling8637 3 жыл бұрын

Im not a mechanic and i dont have an issue with my differential, BUT, i watched the whole thing, twice! lol Very good ,informative video. You sir were made for this . Thanks

@SWTWHITEGSR 3 жыл бұрын

Always good video quality and content, rewatched video to see the dial brand you used im getting one.been watching for years hope i see you for many more.

@sidwalker6902 3 жыл бұрын

Pinion had summer teeth, made ol' girl talk with a lisp

@BrewBlaster 3 жыл бұрын

I didn't like how that old pinion gear looked at all. You just got a better quality gear set the second time around.

@NoWr2Run 3 жыл бұрын

YES, WAS NOT HIS MECHANICAL SKILLS IT WAS THE BAD PART.

@SmittySmithsonite 3 жыл бұрын

Nice work getting to the bottom of that one. Based on an experience I had 20 years ago, I would've sworn it was pinion nut torque that was the issue. I had an '86 Grand Marquis (exactly like the one I own now, only dark blue instead of light blue) that I changed the pinion seal on. After the job, on the test drive, I got an awful howl on decel. I ended up just having to turn the nut another 1/8th of a turn tighter, and the noise was 100% gone. Of course, this was with well worn-in ring and pinion gears - 230k miles at that time. I swapped the carrier in my '07 Silverado last year after a routine spill-and-fill turned up a bunch of metal stuck to the magnet inside. Closer inspection revealed that nearly all the teeth on my side gears were shed right off! 97k miles - they sure don't build stuff like they used to! I bought this truck spankin' new, and I haven't the slightest idea when this happened, or when it started - the diff was completely silent in all modes of operation, and never gave me a hint of any trouble. I installed an OX air locker, and set the preload pretty tight at .004" - the very bottom of the spec. I have a nearly imperceptible howl at light throttle settings that goes away upon the slightest loading in each direction, accel, or decel. Running Amsoil Severe Gear 75w-110, since I haul cars every so often. It's not something I'm going to chase, because I think it's due to moving the mating of the ring and pinion out of the already established wear pattern. Only a ring and pinion swap would cure it completely. Recently I had a '95 Volvo 940 wagon come in the shop with rear end shudder that would happen only when on the brakes, and just before a stop. On the lift, the whole housing would violently shake! I can't for the life of me figure out what is causing this! I pulled an axle - bearings and races look perfect. Had the cover off, and everything looks good there. All the support arms have good bushings in them, so there's no strange pinion angles happening. I would think if this were a bearing issue, we'd hear noise - it's silent, until just before the vehicle stops. The problem is exacerbated using the parking brake. Starting to wonder if maybe I have overlooked a bad rear u-joint? Differentials are amazing pieces of engineering! I would have never attempted my own install of that Ox Locker had I not seen your Fairmont and the truck vids. I just had to see someone else do it first, and that gave me the confidence to go for it. THANKS Eric!! 👍🍻 And you and the family have a great Independence Day.

@themechanic6117 3 жыл бұрын

Great work. Glad you got the problem solved

@MendingThings 3 жыл бұрын

I actually noticed in your first video series that you installed the carrier bearings flush with the stub, instead of tight against the shoulder. As when you pushed them on, you didn't use anything to push the bearings past flush. I would think this would potentially leave a few thousandsth of gap between the bearing and the shoulder that it is suppose to rest on. That would also explain why when you tried to use the same shims that was origninally in it, they were too tight. Just wondering if this had anything to do with it?

@grandmackdady 3 жыл бұрын

wow you would go nuts with my diff. yours is quit compared to mine

@CRXSLY 3 жыл бұрын

my old '86 C10 got the same noise but i know is my 34 years old set of gear that make it this! thx for sharing this is very helpful!

@Smalltechguy 3 жыл бұрын

I never tire of your videos. When I seen this Chevy getting some attention I just had to tune in. I've had my 1988 Cheyanne reworked with 4.56 gears in the back. I'm running 35 12.50 RL 15 tires. Since I didn't replace the front gears placing it in four wheel drive is useless. My issue is trying to find out the original gears that came in this model truck. I had written Monster Transmission since I had purchased a new transfer case from them, but I guess folks are still not getting back to work yet to answer my question.

@mysterygoogleaccount7970 3 жыл бұрын

lol I drove my 94 4x4 suburban for months with 3 teeth missing on the pinion, If it aint popping and banging don't worry about it.

@BLWTV 3 жыл бұрын

My tahoe was winding when I got it 2 months later it has gotten extremely loud . No banging or clunking but just loud from rear when accelerating and when it decelerates . Any advice ?

@don_chuwish 3 жыл бұрын

This gives me an idea for a collaborative series "Eric consults with Eric" on head scratchers. ETCG and South Main.

@jayss10 3 жыл бұрын

Didn’t get to the end but this is extremely common with certain manufacturers of gear sets. Richmond gears tend to whine ALOT due to how they are cut. Motive gears are much quieter.

@Brownnproud91 3 жыл бұрын

I always thought eric the car guy was eric from south main auto. Lmao

@josebriceno97 3 жыл бұрын

Video was very helpful thank you very much. I’m about to install a set of gears myself for the first time This video was very educational.

@fatwalletboy2 3 жыл бұрын

Great vid.very informative and straightforward. Gear noise is always tricky to fix.

@iaahner 2 жыл бұрын

Good video and I love the content! As a guy who does a lot of diffs though, let me say this. 4 thou on the pinion depth is not something I would call "close enough" and move on. And the paint pattern you show at the end confirms. It's close, but I probably would have made a shim adjustment to get that closer. Same with backlash, 11 isn't really what I would call "close enough to 5-9" and leave alone. A few thousandths seems like a silly small amount to be bothered by, but in differential setup it really does make a difference. Regardless, glad to see you got the problem fixed!

@dannybracken3499 2 жыл бұрын

I appreciate all of his hard work and time spent , and shared his journey with us . Even though it was a little noisy , it probably would have been ok . I thought the same thing from the very beginning, ring gear end play excessive . In hindsight I guess that even if ya have to take your thicker shim to a machine shop and have it ground to get the clearance at the bottom of spec ,,, it's the right thing to do. If that was a High performance car , it would have scattered the gear ! Thanks Eric

@rogerhinman5427 3 жыл бұрын

"Okay Eric we'll send you a new set. Thanks, bye!...Hey Frank! You still got that pinion set that you dropped off the truck? I got someone who'll take it!"

@jeffkelley3419 3 жыл бұрын

Hil-larious!

@ericthecarguy 3 жыл бұрын

Funny, I had a similar thought but kept it to myself.

@armoricain 3 жыл бұрын

ROFLMAO!!!

@dannyshwe10 3 жыл бұрын

Finally!!! An answer to the whine on my X5.. Great stuff 🙌🏻🙌🏻🙌🏻

@davidreuter5260 3 жыл бұрын

We can all associate with frustrating issues that seem to take multiple attempts to resolve. Way to hang in there Eric!

@martij30 3 жыл бұрын

My guess would be on the edges of the chipped pinion gear, that must make some local vibration resulting in the sound.

@jeffkelley3419 3 жыл бұрын

A case where maybe you shouldn't let the chips fall where they may. : o

@frankburn6312 3 жыл бұрын

They don’t touch the ring gear.

@the2120company 3 жыл бұрын

yep, I just been there in april, same "dancing with a wolf" noise auuuuuuuuuuuuuu :)

@dave_n8pu 3 жыл бұрын

I especially enjoy these episodes with your dads truck because I also have a GMT400, BUT the body on his truck is SO much nicer than mine. If I remember it started out in Chicago as a delivery truck, salt on the roads...

@JacobLaCour 3 жыл бұрын

Replaced my diff after watching your original video and had the same noise The gear set is currently Richmond excel but if I end up swapping the gear set again I’m just taking it to the shop to have it done because I’ve had it with the rear end project Thanks for your informational videos and updates though your knowledge is definitely appreciated

@yambo59 3 жыл бұрын

deceleration is often to much tolerance / tooth pattern, im also thinking gearset mismatch. You likely got a badly machined gearset.

@joshlentz6665 3 жыл бұрын

What about acceleration only? I've seen that yal have mentioned deceleration in particular twice now

@aserta 3 жыл бұрын

20:36 every lip on "inside" portion of those teeth is raised, as if someone had smashed it with a hammer (absurd comparison). Note how the cut marks travel up, so that wasn't a factory thing, this was something that was raised in use...could it be ...that there's an angle of contact issue here, like a defective case or defective ring gear seat? Because that would cause excessive noise. These gears are extremely finicky and demand very precise angles of contact both in the ring's plane and the pinion gear's. The way i see that gear, it's almost as if the contact was done only on the inside (towards the bearing), with rotation upsetting metal, raising those lips on each of the teeth. This would also explain the chips. You're essentially asking an elephant to walk on ballet shoes. You can clearly see the difference between the new and old gear.

@ericthecarguy 3 жыл бұрын

The old gear was like that out of the box, see the previous videos linked in the description. I wish I had smoothed out those chips before installation as that might have solved the problem from the get go. As for measurements, as you can see in the video I was pretty much bang on since the beginning with the exception of backlash. Note that the backlash was the same on both gear sets though. Still, I learned a great deal during this struggle and now I have a new tool that I can use on the next set of gears. So much of what I do is sharing my experiences with this stuff so that viewers know what to look for when they go to do this work. In a way, my experience is their experience. Some people see that as me not knowing what I'm doing, but in truth, I show my failings so that others don't have to suffer the same fate. Thanks for your comment.

@jeffkelley3419 3 жыл бұрын

@@ericthecarguy I still believe the new set was fabricated better. The teeth weren't so sharp. The old one looked like it was designed for a jet turbine, but that metal is probably titanium or something similar. I'm more comfortable with the new set. And, hey, it's not my truck. : \

@OOpSjm 3 жыл бұрын

@@jeffkelley3419 Night and Day difference in the manufacturing quality of those 2 sets.

@darthvincor 3 жыл бұрын

So frustrating, all that work and then it's still making a whining noise. Good you fixed it in the end.

@springy-2112 3 жыл бұрын

Really enjoyed this , Great to see honest videos showing the good and bad times . Now I'm subscribed I can enjoy more .. 👍🏻☮❤peace and love brother from the UK where most vehicles are front wheel drive and tiny. 👍🏻😉

@NickNakorn 3 жыл бұрын

Excellent video Eric. The take-away for me was whether or not it's worth tracking down and solving such a noise given the cost of finding it and curing it. Mostly I'd say not. I had a vehicle with a noisy diff that ran well with the noise (it did get louder over the years) for nearly 100,000 miles. Passengers would say 'what is that noise - do you have a bearing on the way out?' and I found that regular oil changes kept my mind happy even though I knew the diff was in need of work. Of course, if the vehicle was going to be raced or used to haul heavy loads I would have been anxious but otherwise; no. Nevertheless a great video albeit an expensive fix in terms of time and money.

@ericthecarguy 3 жыл бұрын

It really is about picking your battles isn't it?

@NickNakorn 3 жыл бұрын

@@ericthecarguy Yes, definitely! :-)

@ninjamaster3453 3 жыл бұрын

Seems like that pinion gear all nicked and mating poorly to the ring gear. Would've lived with it on an old truck, doing this 3 times no way.

@jeffkelley3419 3 жыл бұрын

It may be that there is something more Eric's new and old subscribers could learn from this. I know I did. This seems like a straight-forward operation with the right tools and a little patience.

@spelunkerd 3 жыл бұрын

Always interesting to see this done.

@miketienhaara7783 3 жыл бұрын

I heard a clunk sound today during a turn. Sounded like it was from driver side. Differential has fluid on outside. Whole thing needs attention I know. Your video is excellent. I like that you saw it through to the end Two thumbs up!!!

@jaywilbur515 3 жыл бұрын

Same dilemma with my significant other. Years have i tried to solve it. I came to the conclusion years ago there will always be a little whining ◑﹏◐

@painterken2542 3 жыл бұрын

Try given it a good wack with ball peen hammer..if the wineing continues use larger hammer and more force..it will stop

@yourface8698 3 жыл бұрын

Hey where's my digital cake it's my birthday 🎂😁

@ericthecarguy 3 жыл бұрын

I do that on my ETCG1 channel not here. kzfaq.info Happy Birthday!

@jayjanyh2932 3 жыл бұрын

I had his channels mixed up too. His budget is bigger over on his ETCG1 channel, so that's where he can afford the cakes.

@pizzamon795 3 жыл бұрын

Happy birthday your face

@GeertPolo 3 жыл бұрын

8:20 Yes it is, my personal opinion. Lovely to see the truck, very nice build. Good quality content.

@ericthecarguy 3 жыл бұрын

Thank you!

@michaelloven1097 3 жыл бұрын

I've seen a few of your videos and have been impressed. I also have had this exact complaint and noticed the finish of the wear pattern on the gears. Like you said, not a durability issue but still not a happy customer. I'm sure the added cost of new gears was a big issue at the time of the original bearing repair.

@MrWilliam.Stewart 3 жыл бұрын

Why did the alcoholic chase the car down the street? Because there was a wine in the diff.

@Smfmoneoonepointone Жыл бұрын

Really helpful. I have the 1999 LS 4X4 full size pickup and I have to diagnose the issue with my rear differential, however. I won't have to do any of the rear-end stuff this will be the pinion gear and ujoints. This video was very helpful. Thanks a lot..

@chrisw3771 3 жыл бұрын

Just watching this & the noise is exactly the same we used to have with some straight cut gears in the 70's -80's. It was the gear teeth bottoming out in the opposite gear. slightly relieving the tips of the gears & undercutting the oposite groove always worked. Utter pain to do though.

@aaabrignoni 3 жыл бұрын

Thank u so so so much dude you answered my questions n problem Your channel is a blessing to me thank you again.👍😁

@travisarner3541 2 жыл бұрын

This video saved my sanity thank you

@thomasedwards3372 3 жыл бұрын

Eric you did good as usual. Those sounds can drive a person crazy i know... have a groovy day man... Bye Thomas from CA.

@rell8557 3 жыл бұрын

Awesome video Thank You 👏🏾 super helpful I wish you was in nyc having this same issue with my 07 Yukon XL SLT I would have been at your shop ASAP

@vijayantgovender2045 3 жыл бұрын

Happy 4th July thank you for sharing I always love watching videos Eric I am from South Africa

@ericthecarguy 3 жыл бұрын

Hello South Africa!

@xaviers2711 7 ай бұрын

Very helpful video thanks

@timandshannon03 3 жыл бұрын

I just did the Spider Gears on my 04 Tahoe with the 8.5" noticed this sound afterwards. Good information! Thanks.

@ericthecarguy 3 жыл бұрын

Make sure your clearances and gear tooth pattern are good. Thanks for the comment.

@shadetreeautomotiveenthusi1284 2 жыл бұрын

My Dana 60 calls for 250 on the pinion nut. I had the same experience 10 years ago with Richmond gears, on a semi-floating Dana 60. Seeing those pinion bearings cut leaves me with the impression that the torque specs were off, and it break in the ring and pinion to a whine/houl. By the time you replaced the bearings again, it already existed. Replacing the bearings was necessary, but double check that torque spec. And my videos aren't monetized, so when I say Chinese mil spec is junk, that's exactly what I mean. Japan, Germany, or old stock U.S.A. is all we can hope for, for good mil spec bearing race kits. Good video, guy!