What’s Wrong With This Falling Block Single Shot?

  Рет қаралды 32,433

Ron Spomer Outdoors

Ron Spomer Outdoors

21 күн бұрын

Welcome to Ron Spomer Outdoors! Join me and my SD Rifle as we take some test shots and see if my aim is getting better or worse with different ammunition.
Subscribe to my channel: bit.ly/RonSpomerOutdoorsSubscribe
Affiliate Links:
Use Code RSO10 at checkout for either Diamond Blade Knives or Knives of Alaska, and get 10% off your first purchase.
www.diamondbladeknives.com/
www.knivesofalaska.com/Home
Shell Shock
Use code RSO10 at checkout to get 10% off your purchase
Shop Shell Shock: alnk.to/6TzzKuj
Links:
Website: ronspomeroutdoors.com/
Facebook: HYPERLINK "kzfaq.info?even..." / ronspomeroutdoors
Instagram: HYPERLINK "kzfaq.info?even..." / ronspomer
Who is Ron Spomer
For 44 years I’ve had the good fortune to photograph and write about my passion - the outdoor life. Wild creatures and wild places have always stirred me - from the first flushing pheasant that frightened me out of my socks in grandpa’s cornfield to the last whitetail that dismissed me with a wag of its tail. In my attempts to connect with this natural wonder, to become an integral part of our ecosystem and capture a bit of its mystery, I’ve photographed, hiked, hunted, birded, and fished across much of this planet. I've seen the beauty that everyone should see, survived adventures that everyone should experience. I may not have climbed the highest mountains, canoed the wildest rivers, caught the largest fish or shot the biggest bucks, but I’ve tried. Perhaps you have, too. And that’s the essential thing. Being out there, an active participant in our outdoor world.
Produced by: Murray Road Agency - www.murrayroadagency.com/
Disclaimer
All loading, handloading, gunsmithing, shooting and associated activities and demonstrations depicted in our videos are conducted by trained, certified, professional gun handlers, instructors, and shooters for instructional and entertainment purposes only with emphasis on safety and responsible gun handling. Always check at least 3 industry handloading manuals for handloading data, 2 or 3 online ballistic calculators for ballistic data. Do not modify any cartridge or firearm beyond what the manufacturer recommends. Do not attempt to duplicate, mimic, or replicate anything you see in our videos. Firearms, ammunition, and constituent parts can be extremely dangerous if not used safely.

Пікірлер: 242
@tdjohnsky
@tdjohnsky 19 күн бұрын
Like I said in your first video shooting this gun. “Send it back to the manufacturer”. A gun that cost that much should at least shoot sub MOA.
@paulkilmister2223
@paulkilmister2223 19 күн бұрын
I honestly can't believe Ron, you of ALL people were silly enough to NOT take a properly tested rifle to Africa!😮
@m444ss
@m444ss 19 күн бұрын
Ron, you asked a couple questions recently: (1) do want a show about silencers, and (2) would we rather have 1 60-min show or 2 30-minute shows per week. My vote is (1) yes, yes, yes ... I want to hear/see more about silencers from trusted experts, and (2) definitely 2x30. Keep up the great work, Ron.
@thomasdaum1927
@thomasdaum1927 19 күн бұрын
I’m with you Ron , I also hate to get my holes confused !…….
@user-po9hy9th7w
@user-po9hy9th7w 19 күн бұрын
... I'm writing down all the excuses so I can use them on my next range session
@kevingriffith4036
@kevingriffith4036 19 күн бұрын
I have a 7X57 Finley Parker and Hale probably made for silhouette shooting. It has a Douglas air gauge semi bull barrel making it heavy but 140 grain clover leaf groups make it a charm for antelope. I love it. I am not a bench shooter just a hunter, God only knows what it can do. Finley Knew what he was doing. Not a bad buy 1980's $250
@dougkahler7152
@dougkahler7152 19 күн бұрын
I actually believe a fouled barrel shoots faster not because it’s lubricated but because it’s getting dirty thus more friction and higher chamber pressure!
@joshjackson8266
@joshjackson8266 19 күн бұрын
Ron, I hope you read this comment. After watching all videos on this rifle I would highly recommend you have the barrel/action looked at. Go over scope ring and base screws torque first. Then check action screws. Then get another accomplished shooter to shoot the gun to make sure it’s not you. A gun like this should not be shooting this bad regardless of what bullet manufacturers recommend. A cheap factory gun can shoot 1moa easily with a good shooter and better with hand loads. Those groups look like mechanical issues with the bore. I have worked on many guns and a gun shooting like this would be going back to the manufacturer or getting an action blueprint and a rebarrel, then a bedding job. Start with the basics, screws & torque, scope damage (put the scope on another gun you know shoots well), inspect crown for damage, bore scope, take the barrel clamp off for the sling swivel. Eliminate one thing at a time. I’m pretty confident you will deduce that the bore/chamber/action has a problem. First port of call is the scope and mounting.
@lyellclare9365
@lyellclare9365 18 күн бұрын
plus. It is unrealistic to expect projectiles of wildly different dimensions ( different weights ,BC , design,construction , OAL , powder etc )to shoot similar groups. It does happen but is extremely rare..
@mati_stankiewicz
@mati_stankiewicz 18 күн бұрын
That's all right
@ottokittel709
@ottokittel709 15 күн бұрын
I agree with the basic trouble shooting first, but when it comes to relieving wood from receiver, removing pressure points to free float barrel etc I would send it back to the custom rifle builder to finish the job! out of the box it appeared to have accuracy issues. compared to the lowly tikka rifle from few days ago, the pretty single shot looks bad in accuracy for a custom rifle! I believe the pretty 7x57 will shoot after some grooming!
@ryanhenderson4395
@ryanhenderson4395 19 күн бұрын
Is that sling attached to the barrel directly? Hmmm…thermal expansion/contraction of steel combined with the added mechanical force from a sling is a recipe for inconsistency.
@seqcall9953
@seqcall9953 19 күн бұрын
Quit normal on older europeen rifles and hasnt been a known problem if done correctly to my knowledge atleast. Same material will contract and expand at same pace often, but most rifles with these slings arent made for more than 5-10 shots at a time
@wizardofahhhs759
@wizardofahhhs759 19 күн бұрын
More internet fuddlore.😒
@seqcall9953
@seqcall9953 19 күн бұрын
@@wizardofahhhs759 me or?
@BrokenBarBox
@BrokenBarBox 19 күн бұрын
@@wizardofahhhs759 why is everything automatically referred to as fudd lore? I’m convinced the term ‘fudd’ was actually introduced by liberals trying to make the 2A community divisive by driving a wedge between experienced shooters and younger neophytes
@JamesClark-lw6sw
@JamesClark-lw6sw 19 күн бұрын
Silly..
@404nitro
@404nitro 19 күн бұрын
Ron, if you haven't yet, I would suggest using an inch pound screwdriver on the for-end screw and check various tensions to see how that affects your groups due to how the SS for-end mounts. Slight swelling and shrinking can cause them to be slightly looser or more snug both at the receiver block and at the screw itself which can affect your groups. I love that little rifle. It is beautiful.
@RandyMan388
@RandyMan388 19 күн бұрын
Ron, thanks for all the input and your videos on this fine-looking rifle. I thought about having these fine people over in South Dakota, build me a rifle like this. After watching you battle with this rifle, I think, I will regress my thinking on purchasing a rifle like this. I truly hope you get this all figured out. Take care.
@franberman5413
@franberman5413 19 күн бұрын
Out of curiosity I checked the website of the manufacturer for this rifle because I wanted to see what it costs, bare bones rifle costs $8,000.
@js7127
@js7127 18 күн бұрын
That is a darn shame to spend that much for a piece of art because it sure is not a shooter. He has to fight it to load and eject the rounds. I would be embarrassed if I was the builder.
@daveknowles3055
@daveknowles3055 19 күн бұрын
Good luck Ron and remember perseverance pays off. I checked the Hammer site and they have quite a few 7mm bullet offerings. You could step up in weight a little bit and use one round for everything, or continue with your current load and develop one with a heavier bullet for larger game.
@georgecayer7234
@georgecayer7234 19 күн бұрын
Ron, loved the video, just brings memories of the 7x57 which was my Dads favorite round. All he would talk about with his reloading buddy’s and the years at hunting camp was this round and Karamojo Bell and the elephants he (Bell) took with it. I was wondering if this was the reason you selected the 7mm for this trip you talked about. Dad had the exact same rifle in the #1 (wood was not as nice as yours) but he made me promise I would harvest a deer with it after he passed in 2003. I did take a nice whitetail with it. I have four 7mm thanks to Dad and it is also my favorite bullet, having taken many whitetail and black bear with it and now my daughter has moved up from the .243 to my .280 on my Thompson. (8 deer and a bear for her so far so I guess I have passed something on). Dad taught me reloading at a young age (now 63) it is my favorite hobby, thanks for doing your KZfaq channel, I watch it often and usually don’t comment on these but you doing this story on the 7x57 and the Ruger #1, I couldn’t resist. God Bless, George, Rumford ME
@elizabethnybeck9935
@elizabethnybeck9935 19 күн бұрын
Love the 7x57 or 8x57
@shawnstine3244
@shawnstine3244 19 күн бұрын
I don't know what to think about that. A custom rifle I could never afford grouping like that, plus it didn't look like it fed, or ejected very well.😅
@matthewvassoff5736
@matthewvassoff5736 19 күн бұрын
Not all barrels like to digest different weight bullets. Barrel harmonics is something you may want to look into.
@mattmc1083
@mattmc1083 19 күн бұрын
Love my 7x57s, including my #1 in 7x57. I have just collected a bunch of brass and load my own ammo. Commercial ammo is only around a couple of weeks a year
@hamishbarker4117
@hamishbarker4117 19 күн бұрын
Lovely rifle, and the 7x57 is a lovely round. Good video, Thanks
@TMFShooting
@TMFShooting 19 күн бұрын
Another great Video Ron 💯 thanks for Sharing 💥💥💥💥💥💥💥
@joracer1
@joracer1 19 күн бұрын
3 shots 3 days, cold bore.. true hunting shooting test.
@LONGRANGEPRECISIONSHOOTING
@LONGRANGEPRECISIONSHOOTING 19 күн бұрын
Great video Ron thanks
@deedraper9796
@deedraper9796 19 күн бұрын
Great diagnosis’s Ron I have a slight correlation with your rifle in regards to grouping and velocity I have recently acquired 2 new rifles, upon load development and shooting. Both rifles were “premium “ brands I found the following : Groups on both rifles were around 1 1/4” which moved around orientation Velocity always slowed down on bare naked bore Cleaned every 20 rounds or so. Conclusion The .264 win mag started stacking shots at around 175 rds The 6.5 prc finally stacked groups at 200 rds I had mixed results with testing Barnes LRX and sierra gamechangers TGK Followed both barrel manufacturers break in procedures Stick with it some bores just need some shots , I pulled most of my proverbial hair out with mostly the same situation you have experienced Good luck
@VictoryVic-m7d
@VictoryVic-m7d 19 күн бұрын
Interesting to see a custom rifle like this be moody. I have a Ruger No1 A Light Sporter 7x57. Barrel band sling mount, similar setup to yours. Factory Ruger barrel. Mine was VERY load sensitive 3-4MOA (140gr to 160gr) shooter before some tireless handloading tighten it up to 1MOA with 120gr bullets. My best reloads are the 120gr Barnes TTSX or Nosler BT. I can't get 160gr anything to shoot much better than 2MOA. I'm really surprised to see what is basically a new rifle struggle like my late 1970's Ruger. I wouldn't have expected that even with the quirks of the falling block action.
@troy9477
@troy9477 19 күн бұрын
From ehat i know about rifles, my first thought is forend pressure, as you mentioned at the end. That assumes the bases and rings are snug and properly torqued. It would be worth trying a couple of different bullets as well, including cup and core. With the bullets you are using, would it be worth experimenting with seating depth? I assune you know the throat dimensions, and would know how much you can vary the seating depth and OAL. Might have to work up loads with different powder also, which may be hepful given the often spotty availability these days. Never hurts to have good loads with more than one powder. I am sure you know all this, but sometimes it helps to hear it from another source. Thanks for showing the good and the bad. I would venture to guess 1.25 moa is achievable with that design, and maybe a little better. Those 160's compare favorably with 180 gr 30-06, and should be adequate for almost everything down here. I recently saw the video where you and Joseph had the 160 A Frame go through the maple log in a 7mm-08, and nothing else did. Hope you get good results with that rifle. Looking forward to the followup videos.
@anthonygendron9737
@anthonygendron9737 19 күн бұрын
See isn’t that nice to see the speed of the projectile in front of you. I’m happy to see your stepping up to the modern world.
@BorealEDC
@BorealEDC 19 күн бұрын
Beautiful rifle Ron. I wouldn't mess with the firearm itself, just yet. Really work through your hand loads, try different powders, and different charge weights, find a node that barrel likes. I recently struggled with this on my new M70, and I went back to basics and sure enough found a load that gun loves.
@wilberfifer5563
@wilberfifer5563 19 күн бұрын
Thanks Ron, I'm having some of the same issues.
@bobscruggs8886
@bobscruggs8886 16 күн бұрын
I use to own a Ruger # 1 270 cal with hand loads the best group was like 3 / 3 1/2 inch groups, sold it !
@Rangitatahunter
@Rangitatahunter 19 күн бұрын
Minute of shotgun is always a little disappointing from a high $ rifle… time to try some load development with different powders & or send it back to the builder to prove it / fix it?
@Rattletrap-xs8il
@Rattletrap-xs8il 19 күн бұрын
first thing I check with erratic accuracy of an unknown rifle, Is the crown OK? What is the twist of the barrel? Is the barrel clean?
@travisweldmaster7815
@travisweldmaster7815 19 күн бұрын
Aside from cleanliness, what you said will NEVER CHANGE, if it did shoot...it should still the barrel isn't changing rifling
@phild9813
@phild9813 18 күн бұрын
Crown could certainly change if it were damaged.
@calvinwebb3980
@calvinwebb3980 19 күн бұрын
I have an old marlin 336 in 30/30 , my main hunting rifle. If I switch from one type bullet to another I temporarily lose accuracy . For instance going from hornady interlock round nose to ftx . If I go ahead and shoot several rounds the accuracy comes right back. I’m no expert but this has been my experience. I was really glad when I figured this out . Hope this helps
@scottearnst8152
@scottearnst8152 19 күн бұрын
1/2” groups? You can do it!!!! I think and have developed this thinking from listening to you and putting it to the test, scrubbed barrel and shooting hammer or Barnes, then the more I shoot same bullet , the barrel magically shoots that bullet better(somebody explain that magic🤷‍♂️). Also any bullet change to a barrel after its broke in for an all cooper bullet, then I’m back to square one with group size. I believe the fuss is worth the terminal ballistics of the all cooper wonders! Thanks for the great content
@glockparaastra
@glockparaastra 19 күн бұрын
With hand loads I have my CZ 557 7X64 Brenneke shooting sub 1/4 MOA at 100m with a 12X scope. It’s my only wood stock dedicated hunting rifle. I’m never happy unless I get min 1/4 MOA out of any of my rifles but I mostly do bench rest target shooting. Point is, with the right bullet, case, and powder that beauty of yours should shoot 1/4MOA. Just takes time. Good luck!
@gildasguerin
@gildasguerin 19 күн бұрын
Ah ah 😂 ahem…
@kodiakkeith
@kodiakkeith 15 күн бұрын
I have a Ruger #1 in 7x57 that had similar problems. I even went so far as to have it smithed with a screw inside the forearm to adjust upward pressure on the barrel, with little result. I was only shooting the standard 140 grain factory loads, but one day I saw some S&B 175 grainers on sale and they shot great! The Ruger, and perhaps your falling block, have a fast twist rate for long slugs. It was that simple. The Federal 175 grain also groups well. I don't know if twist rate vs bullet length is particularly an issue only with 7x57 or peculiar to falling block actions. Either way, I just stick with heavy slugs and it's a great shooter, though not MOA even with those. It's just "good enough."
@michaelhill6451
@michaelhill6451 19 күн бұрын
Yikes! Those were some wild groups. I have to wonder if the scope/rings/base are on there solid. If they are, the scope might be the culprit. The only time I had something shoot as wildly as this was when I was shooting a 12 ga slug gun and the rail came loose.
@roblowe9283
@roblowe9283 19 күн бұрын
Keep up the good work !!!!!
@danietheron9978
@danietheron9978 19 күн бұрын
The 140gr Acubond personaly I will load for this rifle, check on quickload for a rough load and work from there.
@Q_Sertorius
@Q_Sertorius 18 күн бұрын
I don’t understand why Ron always seems to be short on ammo and reuses old targets. If I was shooting a $10k rifle, I’d have 200 cartridges from the same lot on hand to test it out.
@user-jh6cr4sl1t
@user-jh6cr4sl1t 7 күн бұрын
What I have Seen in the passt is, when I changed from lead to copper, it needed 4-5 shots with the new bullet until the rifle grouped well again.
@drocfox9771
@drocfox9771 19 күн бұрын
I find it’s usually the ammo with powder becoming more difficult to get. It changes the velocity and point of impact. Just ask hornady
@andrewduarte8938
@andrewduarte8938 19 күн бұрын
It looks like the scope ring is touching the objective end at the taper. Slide the scope forward a hair and see if it changes
@davidfornkahl8374
@davidfornkahl8374 19 күн бұрын
Ron, you just have to face facts! Some rifle barrels just like certain bullets/ certain weight bullets. I have some that favor flat base over boattails.
@Buddha-of8fk
@Buddha-of8fk 4 күн бұрын
Most accuracy issues are solved at the reloading bench. Just takes time and some aggravation.
@edupdike-ed4qj
@edupdike-ed4qj 19 күн бұрын
Hey Ron I noticed it looks like your shooting up hill. And the way you have your rear support bag on the angled bottom of the stock. Before the bullet leaves the barrel, the recoil would make your shots consitantly high. I've recently learned that long distance shooters use stocks with a flat bottom thats parallel to the barrel. I would also recheck the scope mount as well.
@Lixmathing
@Lixmathing 19 күн бұрын
Hey Ron, I would love to see you do some 5 round groups.. I think it would be nice if everyone started getting back to 5rnd groups Keep up the great work!!
@dwaynemeyers5610
@dwaynemeyers5610 19 күн бұрын
Who T great video by far one of the best explanations in dailing in a scope
@dhooter
@dhooter 19 күн бұрын
Dude shot a dang horse
@jaydunbar7538
@jaydunbar7538 19 күн бұрын
He shot a zebra, not the same animal. While related they really are very different animals.
@charlesmccoy5857
@charlesmccoy5857 19 күн бұрын
LOL
@dpwhitaker7088
@dpwhitaker7088 19 күн бұрын
@@charlesmccoy5857 😁
@portersorensen8814
@portersorensen8814 19 күн бұрын
+1 to jaydunbar7538. That being said even if they were the same, other cultures do not see horses the way they are seen in the US
@theowenssailingdiary5239
@theowenssailingdiary5239 19 күн бұрын
@@jaydunbar7538 really? You so slow you didn't realise he was kidding?
@G53X0Y0Z0
@G53X0Y0Z0 16 күн бұрын
I don't take a bench with me when I go hunting and conditions are not always optimum, so I personally want a rifle that shoots twice as good as I expect to shoot in the field. I prefer 5 shot groups, it gives a truer picture of what a gun will do time after time. Those are my thoughts. Beautiful looking rifle too.
@tlloyd9325
@tlloyd9325 19 күн бұрын
So many variables going on. In my experience I have only found two different bullets that shoot same poi. The Sierra Game King and Barnes TSX will shoot to the same point with the same exact loads, I.e. bullet weight, powder, and primer but with 0.30” off the lands Barnes and 0.10” with the Sierra. I do moly coat everything. Yes messy but it works for ME.
@backcountrylifemagazine6912
@backcountrylifemagazine6912 17 күн бұрын
Ruger No.1 (and some clones), notoriously shoot erratically due to forearm “lump” which touches the barrel. It’s a relatively easy fix to grind that lump out, free-float and glass bed that fore end. Rifling twist rate, relative to bullet weight can be an issue too. Heavy bullets require faster twist. I’m my opinion MOST factory rifles have too slow of a twist rate, for the commonly available loads.
@Sageofthe16
@Sageofthe16 19 күн бұрын
scope is where id look. find one you trust😊
@craiglacount89
@craiglacount89 17 күн бұрын
Very interesting and I’m sure frustrating. As I have mentioned in comments on previous videos I have a No. 1 in 7x57 and I created my load using 140 grain TTSX bullets, it shoots .75” to 1” groups. I recently bought some 150 grain scirocco’s and created a new load for them and got them shooting groups equal to the TTSX’s. When I shoot them together at the range the group size remain good but of course the point of impact is different. I think it’s a similar situation to what you have but I’m not seeing the accuracy issue. I hope that you’re able to resolve the problem and that you update us on what you find. Good luck my friend.
@williamkaiser8067
@williamkaiser8067 18 күн бұрын
Mercy sakes, what a gorgeous chunk of wood!
@matthewvassoff5736
@matthewvassoff5736 19 күн бұрын
My pa taught us boys to load "matrix's" pick a bullet and load it at several variations of speed. Shoot 2-3 of each and log their accuracy. Check the bore after each volley and keep notes on fouling, and review the data for your best choice of speed per bullet mfr.
@noahhorinek
@noahhorinek 19 күн бұрын
I'm only a bit into the video, but I spotted an immediate mistake. With Hammers it's recommended that you scrub your bore to bare metal before shooting them. Something about how their copper and design doesn't go well with other copper and fouling patterns, blah blah. I'll edit this when I finish the video. Yeah, you figured it out. Good on you Ron.
@matthewvassoff5736
@matthewvassoff5736 19 күн бұрын
I use Barnes XLC 165 in my 7x57 with no issues.other than needing a sharp knife😂
@noahhorinek
@noahhorinek 19 күн бұрын
@@matthewvassoff5736 good for you, Matthew, but I do not know how that applies to my comment. Hammer Bullets always shoot better if they’re the only bullet that has touched the rifling within that cleaning span.
@edwardabrams4972
@edwardabrams4972 19 күн бұрын
@@noahhorinekyou are correct and Ron knows this but doesn’t follow his own advise🤔😳🤣
@robertroundtree9471
@robertroundtree9471 19 күн бұрын
Hay Ron They got this new gag-it called a spotting scope. Amazing new device that lets you check your target from your shooting position. Maybe you should try one !
@Sageofthe16
@Sageofthe16 19 күн бұрын
he said he likes exercise. give him a break
@RonSpomerOutdoors-Podcast
@RonSpomerOutdoors-Podcast 19 күн бұрын
My wife enjoys the spotting scope view. I like the exercise.
@glockparaastra
@glockparaastra 19 күн бұрын
How are you cleaning? Iosso bore paste and Iosso nylon bore brush will do it. Or Thorro Clean. I’d try Lapua brass and a different powder. Perhaps a lighter TTSX.
@billhatcher2984
@billhatcher2984 19 күн бұрын
If you are ever without coper cleaner all you need is an ammonia window cleaner if it's really bad you can plug the bore and let it soak for a couple hours or even overnite
@michaelwhisman345
@michaelwhisman345 19 күн бұрын
I think you’re on the right track with the 2 loads not liking working together. I think if you gonna switch between the 2 your gonna have to scrub the barrel
@retired-pipefitter
@retired-pipefitter 19 күн бұрын
How too prove your custom $10,000 rifle isn’t as accurate as a $1,000 off the shelf rifle! It’s a shame
@Squizzle-56
@Squizzle-56 19 күн бұрын
I would say $500!
@retired-pipefitter
@retired-pipefitter 19 күн бұрын
@@Squizzle-56 your probably right!
@edwardabrams4972
@edwardabrams4972 19 күн бұрын
It’s not the rifle it’s the nut behind the recoil pad🤔😳🤣 60+ years of reloading hunting and collecting hundreds of rifles and it’s so funny when we don’t follow our own advise🤔😳 Ron Never use 2 different types of ammo on a hunt it’s a recipe for failure! Good news you didn’t get attacked or killed by some wild animal so I guess you live to learn another day!
@user-po9hy9th7w
@user-po9hy9th7w 18 күн бұрын
@@retired-pipefitter $200
@flintrichards945
@flintrichards945 17 күн бұрын
I have a old 7x57 mauser that is a laser with the old 175 gr. Load I have used it on everything.
@bekkerbosbeer3453
@bekkerbosbeer3453 19 күн бұрын
Ron try 173/175 gr factory ammo Sellior and Bellot or PPu...
@JAEUFM
@JAEUFM 19 күн бұрын
My ignorant thought, it could be that this particular rifle is super finicky about the ammo going through it. It might be, that you have not found the ammo brand, bullet type, weight, that it will prefer?
@barrysanders9946
@barrysanders9946 19 күн бұрын
Tell me about your bench. Looks very stable. Thanks
@michaelwilson9986
@michaelwilson9986 19 күн бұрын
This should be good.. Am typing this before watching btw. I hope you can in doing this get an ideal If its the barrel fouling worse with 1 over the other,n affecting the accuracy of the other. Ran into that with Barnes X n Orginals while didnt have an accuracy issue as others did.. Did have to clean bore a bit more often to keep it.. Wish was keeping notes back then as well as do now.Agree with what Ya mentioned . Carry on. N God Bless Ya n Yours
@michaelwilson9986
@michaelwilson9986 19 күн бұрын
After Watching...I believe your on the right track here.. I think if you have n wish the Northforks might want to retry them as gonna be doing with the Hammers. I think if they shot well before Africa they should now. I dont think pressure on it but not worked with that type of single shot.. I have noticed on H&R one has to be consistent with where front forend is supported maybe something for yours. I do think WIND is an issue for accuracy here..noticed it during 3006 week.. Not saying it is but a gust as you fire can very well play havoc with a group.Notice the tree behind ya light moving to full shake ,You would know more about that than any of us however. I also hope ya sint done with the 06s IF YOU ARE SEND TO ME I WILL WRING EM OUT..😂 Carry On Sir Well Done
@davidfornkahl8374
@davidfornkahl8374 19 күн бұрын
In one of Elmer Keiths articles in an old Guns and Ammo magazine, i remember him tslking about those type of rifles. Some gave good accuracy, some didnt. It seemed he had a fix for it but i cant remember what it was. Maybe someone out there remembers.
@user-jn8js8uh9p
@user-jn8js8uh9p 19 күн бұрын
Ron Cowell makes a nice front rist for about 150 dollars it has a level built into and the front bag opens and closes to help hold the for end
@drewriggs812
@drewriggs812 19 күн бұрын
Did taking off the sling change the barrel harmonics?
@1boortzfan
@1boortzfan 19 күн бұрын
I can tell you from my own experience with my Ruger #1 in .308 how you ride that front bag is most important. If you go back and look at your own video you'll see that point of the firearm on the front changes from shot. Mine likes to rest way back towards the rear of the rifle.
@francoisbm6785
@francoisbm6785 18 күн бұрын
if the thing was shooting before I would change the scope, check mounts and rings alignment etc before modifying the rifle.
@Alan.livingston
@Alan.livingston 19 күн бұрын
What you need to do is strip the rifle down and throw everything but the action in the bin. Once you have your action in hand you need to call all your sponsors and use the parts they send you to rebuild it into a total custom rifle in a completely different caliber. Hey presto, it'll shoot one third MOA and you can buy yourself an ice cream with all those sponsor bucks.
@thatsthewayitgoes9
@thatsthewayitgoes9 19 күн бұрын
Great cartridge 7x57mm .
@andrewteal3016
@andrewteal3016 18 күн бұрын
With the way things are today - I struggle with the idea that "you need to find ammo it likes" when something's putting up shotgun groups. I get finding ammo it likes to get from 1.5 moa down or something like that but ammo today is too consistent, bullets and powders are too consistent, brass is too good, barrel makers too good and machine tooling too consistent for ammo to be the "reason" a rifle shoots like a 12 ga choked IC. (on average compared to 30 years ago)
@ricktaylor5744
@ricktaylor5744 19 күн бұрын
Beautiful rifle Ron , it looks like you may have had a little bit of trouble closing the action ? Maybe you should size your brass a bit more?
@kurtgrates4964
@kurtgrates4964 19 күн бұрын
Sometimes the problem is staring back at you in the mirror!
@marktaylor8263
@marktaylor8263 19 күн бұрын
I don't see how two different bullet weights, different powder & charge can perform the same. The bullet coefficients are different, flight is going to be different along with speeds. Ron, help me out.
@PassivePortfolios
@PassivePortfolios 17 күн бұрын
If I was going on an expensive hunting trip, I'd take one kind of ammo, the one which is the most reliable and accurate in my rife. I would not mess around with two different loads, especially different bullet weights and bullet composition. All copper bullets are notoriously fickle on accuracy.
@davewinter2688
@davewinter2688 18 күн бұрын
Randy Selby and others have videos about accuracy problems in Ruger #1’s caused by the way the forearms are attached to those falling block rifle barrels. I know there are multiple other factors to consider but that might be something to look at. If know this video is about using and promoting a particular manufacturers new style bullets but if I had the money to hunt in Africa and was using a 7x57 (which I would not be afraid of) I’d stick with the long proven 175 grain bullets for even the largest plains game. As Dr Kevin “Doctari” Robertson says the 7x57 “just works”. The 7x57 has been made even better today with bullets like the Nosler Partitions and Long Range Accubond bullets. I’d also stick with Mauser ‘98 or Winchester M70 controlled round feed action rifles. Happy hunting boys and girls!😊
@Dundee_7777
@Dundee_7777 19 күн бұрын
howdy Ron, know you are probably a busy guy and don't have much time to respond but here goes. (going to be a long comment ) I live down in KY after I got out of the army, but I was raised in IL. I know darn Yankee lol, but I'm a southerner at heart. Point being is that rifle hunting for deer and such was illegal where I grew up until last year or so. However, now that I live in a less communistic state I can rifle hunt for my deer/hog and the wife and I wouldn't mind going on a guided hunt in the future. She will always be a die hard fan of her 1975 Winchester 94, but I have always loved my bolt actions and scopes. So I decided on buying a 1965 Winchester model 70 chambered in 30-06 with a 4x savage scope. beautiful gun and it shoots great. Problem is that it doesn't fit me well. My fingers are too long for where the trigger is at and the angle of the grip makes for an awkward time readying my piece. So I have decided to sell it (posted on gunbroker if anyone is interested) and look for a different rifle. I was able to handle a variety of different guns and I think I have settled on a 1980's model Remington 700 BDL chambered in 30-06 with a Leopold 3x9x50 scope. But here are my questions... 1. Are the old Remington 700's the great rifles they are said to be? 2.Are they very accurate? 3. Is 30-06 the best choice for an all round hunting/ ranch rifle 4. What scope mag is best for medium to big game hunting 5. What is your recommendation for a rifle company that puts care into making their guns. Good wood, actions, etcetera
@MarkGee-rp6ye
@MarkGee-rp6ye 19 күн бұрын
I'm not Ron, but I'll give you my 2 cents worth. 1. I've had a 1983 model 700 in 30-06 for over 40 years. The action is strong and simple, with a very weather-resistant bluing. I consider it a great rifle. 2. With my handloads, it shoots 3/4" 100 yard groups. 3. Three great deer cartridges are .270, .280, and 30-06. It would take several lifetimes of deer hunting to determine which is the better of the 3. 4. It has a Leupold 2.5-10x40 scope, which is nearly always set to 2.5 x. Your 3-9 is very good. 5. I also love my Weatherby Accumark in 6.5-300. Synthetic stock (no wood), heavy stainless fluted barrel, 9 lug lockup, 54 deg bolt lift, superb trigger, also shoots 3/4" groups, but a bit pricey (a little less than $2000).
@jussi6905
@jussi6905 19 күн бұрын
I got forrester copper foam, can you investigate barrel cu cleaning
@chipsterb4946
@chipsterb4946 19 күн бұрын
It shot well in Africa except for one shot. It shoots poorly no matter what after traveling back home. Something happened on the way home. Scope, rings, action screw, wood expansion…
@MrPh30
@MrPh30 19 күн бұрын
@@chipsterb4946 wood warping may be one of the ones to,look into,as that can happen . When you mention it i remember reading about a Norwegian guy that experienced the same with a Sako rifle down in SA ,when he came back home it shot just weird,,took it to stock maker,and a much wood removed,and replaced with bedding .
@sbacsigadget
@sbacsigadget 19 күн бұрын
If the manufacturer of the rifle test shot the rifle for accuracy, by any chance did they supply a case and the load they used to achieve their accuracy. I may even cerresafe the chamber and throat dimensions, tight bore or a little bit loose.
@aymanitani4212
@aymanitani4212 19 күн бұрын
It’s you man it is you !
@clayweston1790
@clayweston1790 19 күн бұрын
Is it normal for a falling block system to not extract the case? The way Ron has to stuff around to get the case out would make me not use that rifle at all.
@RonSpomerOutdoors-Podcast
@RonSpomerOutdoors-Podcast 19 күн бұрын
It works fine when I'm not trying to catch the brass, Clay. Falling blocks are not the smoothest to operate on a bench.
@edwardabrams4972
@edwardabrams4972 19 күн бұрын
When going to Africa it’s best to take old Betsy that has been tried and proven over a rifle that doesn’t have any track record yet! Just my 60+ years of reloading hunting and collecting about 2,500 rifles over the years so many failures as well as success in breaking in a new rifle 😂
@KingLoopie1
@KingLoopie1 19 күн бұрын
I'm thinking harmonics. Different bullets, different weight. Or does that rifle just like to be held off hand and not off of the bench?
@kevincraig6407
@kevincraig6407 19 күн бұрын
think you need to strap it down to a led sled, eliminate the variables.
@ronladuke7235
@ronladuke7235 19 күн бұрын
I have seen that many times when the heavier bullets shoot higher on the target. Always thought it might be due to the higher recoil?
@jfess1911
@jfess1911 19 күн бұрын
Possibly, but relatively thin barrels like this vibrate quite a bit. That means the muzzle can be pointed slightly differently when the bullet leaves, depending on the load. It is really not uncommon for different loads to group several inches apart. I tend to prefer heavier barrels, mainly to minimize this and make it easier to get an accurate load. It is sometimes possible to get a thin-barreled rifle to group well, it just takes more work.
@Iceaxehikes
@Iceaxehikes 19 күн бұрын
It seems like the projectiles themselves are the problem. Seeing it shoot so well with the Hammers and all. Is it possible it's just a bad batch of bullets?
@Lucysdad66
@Lucysdad66 19 күн бұрын
Is that the same scope you were doing the testing on the 308 with?
@m444ss
@m444ss 13 күн бұрын
It looks like you're shooting uphill. does that change point of impact relative to zero vs when shooting level?
@georgerowlands5100
@georgerowlands5100 14 күн бұрын
I may be wrong but could it be altitude or not,as i shoot air rifle was told that at different altitude the power levels can change so could your rifle do the same? Ron like i said i could be wrong
@johnl5974
@johnl5974 19 күн бұрын
What bench are you shooting off of?
@jamescampbell9533
@jamescampbell9533 19 күн бұрын
Might give some thought about operator. Ha!
@RonSpomerOutdoors-Podcast
@RonSpomerOutdoors-Podcast 19 күн бұрын
The operator has thought about the operator for more than 50 years and has that part figured out. I shot with another rifle the other day (same bench set up) a .441"., several sub MOA groups with a variety of loads. I try to call my shots to within an 1/8 MOA.
@jamescampbell9533
@jamescampbell9533 19 күн бұрын
@@RonSpomerOutdoors-Podcast I’m 74 this year and have lost a step or two myself but I’m still schooling the young guns at the range. I won’t make to Africa but at least we get to watch. How about writing a book on Your Safaris.
@lyndonhamby7432
@lyndonhamby7432 18 күн бұрын
Sorry Ron. That gun would be for sale. It sure pretty though
@JeffandLeslie
@JeffandLeslie 19 күн бұрын
did the builder send a test target with the rifle? If so, what loading did they shoot it with. Assuming the test target group was satisfactory, duplicating that load would be a good place to start and see if you can duplicate the results. It may be worthwhile to send it back to ParkWest (spelling?) to see if they can sort it out or give you some info. I would surely expect a custom / semi-custom rifle to perform better than that. On my Sharps, I did shave a few thousandths off of the stock where it meets the barrel. A piece of notebook paper will not fit in the gap but upon close inspection there is a gap. Prussian blue does not transfer. Also, where the screws attach the stock to the barrel, I punched out a couple card wads (about .010" thick) to go between the stock and the barrel to act as kind of a buffer. Hard to truly free float the forestock on a single shot so minimize the contact points. Hope you get it sorted out
@paulx2777
@paulx2777 15 күн бұрын
Is the scope loose?
@jsummers-uk6gk
@jsummers-uk6gk 19 күн бұрын
How about the altitude differences between Africa and Idaho????
@andyjonathan2486
@andyjonathan2486 19 күн бұрын
Have someone else who you trust has solid fundamentals shoot the rifle. See if it’s you or the rifle/load.
@livingintheLight.
@livingintheLight. 19 күн бұрын
I figured you seized the block
Weatherby M307 - Accuracy Test
18:22
Ron Spomer Outdoors
Рет қаралды 38 М.
375 H&H vs 338 Win Mag | Ballistics Comparison
28:13
Ron Spomer Outdoors
Рет қаралды 297 М.
🤔Какой Орган самый длинный ? #shorts
00:42
Nastya and SeanDoesMagic
00:16
Nastya
Рет қаралды 29 МЛН
路飞被小孩吓到了#海贼王#路飞
00:41
路飞与唐舞桐
Рет қаралды 83 МЛН
Punt Gun vs Bulletproof Glass (200,000 FPS ft. The Slow Mo Guys)
16:14
Kentucky Ballistics
Рет қаралды 1 МЛН
Eps. 354: Bear Advice With A Master Alaskan Guide
50:34
Ron Spomer Outdoors - Podcast
Рет қаралды 463 М.
RELOADoc -  Considering reloading? Please🙏 watch this.
11:59
Reload OC
Рет қаралды 4,1 М.
Is Fast Twist 270 Win. Really Better?
23:32
Ron Spomer Outdoors
Рет қаралды 159 М.
One of the BEST HUNTING RIFLES Most Can Afford!
27:49
Guided
Рет қаралды 60 М.
The TRUTH About Hunting in Africa
27:37
Ron Spomer Outdoors
Рет қаралды 43 М.
POINT OF IMPACT SHIFTS: The Ugly Truth
25:21
Desert Dog Outdoors
Рет қаралды 41 М.
Is The 7 PRC Really Better Than The 7 Rem Mag?
25:50
Ron Spomer Outdoors
Рет қаралды 206 М.
9mm vs 40 vs 45: Can’t Believe The Results
13:26
Banana Ballistics
Рет қаралды 602 М.
100% Smooth Skills
0:35
L7 Football
Рет қаралды 15 МЛН