What wears the clutch quickly?

Рет қаралды 391,480

Күн бұрын

This video will help you understand what methods of driving causes clutch wear and how to drive smoothly without wearing out your clutch prematurely. There are three main components you can wear out, the friction material, the friction shock mechanism and the release (throw out) bearing. This video covers all three components.
Get a competitive quote for your insurance via these links:
Collingwood (up to 35% discount via the link):
www.collingwood.co.uk/learner...
Confused:
www.awin1.com/cread.php?awinm...
The above links are affiliate links and Conquer Driving may receive a small commission if you use them but they will cost you nothing to use. I've done a lot of research and I would recommend these links for trying to find your cheapest policy. Thank you for watching and supporting the channel.
This video is created by an experienced driving instructor, please subscribe to get my latest videos as I upload them to help you pass the UK Driving Test.
Here is my driving school's website:
www.conquerdriving.co.uk
This video is a guide intended to help people who are learning to drive with a driving instructor in the UK, it is by no means a replacement for driving lessons with an appropriately qualified driving instructor.
Laws and driving rules may be different in your country. The makers of this video cannot be held liable for any consequences caused by any information that is in any way inaccurate, misleading or missing. The makers of this video are not liable for any person's driving other than their own, it is the responsibility of the person driving a vehicle to ensure they drive safely and within the law. The makers of this video are also not liable for any person failing a driving test as a result of the information provided in the video.

Пікірлер: 774

@Eatsalot1114 2 жыл бұрын

I’ve been releasing the clutch way too fast and skipping the bite point causing jerky shifts because I was scared to roast it. Thank you for this video explaining that pausing on the bite point for a few seconds when shifting as well as pausing on it to allow it to match revs when downshifting isn’t bad for it and is considered normal wear. Lifesaver man thank you!

@gravemind6536 2 жыл бұрын

Ironically what you were previously doing was actually putting more wear on your clutch. When you release the clutch too quick often refered to as dumping the clutch you are essentially slamming the clutch plate against the flywheel which is spinning at whatever speed you're reving the engine. Smooth operation is what makes clutches last. How long can a clutch last? How long is a piece of string. Some silly racer boy can burn through a clutch in 10000 miles or less than a year and someone else can make that same clutch last 200000 miles and 15 years.

@Eatsalot1114 2 жыл бұрын

@@gravemind6536 exactly I don’t know even know why I didn’t consider the other components of the clutch. You’d think I would’ve put two and two together being so into cars😂

@thekrimsonchin6023 Жыл бұрын

Thank you for this comment bro, I would be in deep shit had I trusted myself on how to use a clutch.

@madebydade305ify Жыл бұрын

At the bite point while holding it for a few seconds, do you give it gas as well or gas after coming out the clutch?

@khisshenrajals.alagappan8351 Жыл бұрын

@@madebydade305ify Normal upshifting, yes very slight gas to make things smoother at the bite point

@FailMachineInc 4 жыл бұрын

Would love a video about owning a car for the first time. Maintenance, care, etc. Cheers.

@ConquerDriving 4 жыл бұрын

I do plan on doing some videos on this topic in the future.

@lexithelexus7377 4 жыл бұрын

yep !

@warrior8154 4 жыл бұрын

Watch ChrisFix about taking care and fixing your own car

@lexithelexus7377 4 жыл бұрын

@@warrior8154 i love his videos !

@warrior8154 4 жыл бұрын

@@lexithelexus7377 me too

@lmnop291 11 ай бұрын

To summarize: you want to keep heat out of the clutch. The clutch’s job is to match your transmission revs with the engines revs using friction. Excessive friction makes it overheat which increases wear. To avoid wear avoid staying on the bite point for over 5 consecutive seconds especially when there is a large difference in speed between the transmisión and the engine. If you ever smell burning make sure to give the vehicle time to cool. And diagnose what causes it so that you can improve. Don’t be scared to use the clutch it’s meant to be used. Yes it’s expensive to replace but it’s even more expensive to replace your transmission. So definitely USE IT. That’s what it’s for.

@InfiltrateIndustries 9 ай бұрын

Thanks

@user-mn8lz7gf6d 9 ай бұрын

"for over 5 consecutive seconds" what. That's a fucking eternity! On the other hand I'm pretty sure I rode the clutch for a bit in stop and go traffic.

@mappies123 7 ай бұрын

@@user-mn8lz7gf6d in stop and go traffic once my car starts to move i immediately clutch in and coast. it's more work on the legs but i assume it'll help to reduce wear on the clutch lol

@alexapirot32 3 ай бұрын

@@mappies123holding tj3 clutch in is bad for your transmission. Just shift into neutral and coast, it's even easier on your legs.

@mappies123 3 ай бұрын

@@alexapirot32 the traffic doesn't stop long enough to justify doing that and i rarely get into heavy traffic so it's honestly not a big deal

@KING0SISQO 4 жыл бұрын

I’ve learnt how not to wear the clutch out the hard way. But I’m better on the clutch for it now. And I agree all of what this guy says.

@ConquerDriving 4 жыл бұрын

I learnt the hard way too. Been through many clutches with learners in my time so I've learn what does and does not wear them.

@gravemind6536 2 жыл бұрын

I think most people especially men drive like total knobheads and generally abuse their cars when young but yeah you soon learn to take care of things. I am yet to replace a clutch and I intend on never having to do so. I have however blown out a tyre from a reckless overtake I learned from that big time it only cost me £50 and 30 minutes of my time but I did it to save 2 minutes. I overtook a tractor on a narrow stretch of road and ended up in the gutter and blew a rear tyre thankfully I was only doing 40mph. The way I drive now is so different, I plan ahead so much and don't focus on speed but instead on the flow of traffic. In a traffic jam I never stop for more than 10 seconds because I just keep the car rolling in 1st gear so by the time I reach traffic thats stopped it starts moving again it pisses people off behind me because they want me to accelerate to a stop quicker but I don't care about them. Honestly anyone speeding about like a nutter in the city is wasting their time you get to the next parked car, traffic light or traffic jam quicker.

@vasts1479 3 жыл бұрын

Young learners are so lucky to have a teacher like him.

@TheAndythomnz 5 ай бұрын

Great video. One additional way to reduce clutch wear is to prefer using the brakes to slow down, rather than changing down gears for engine braking. Both are valid driving techniques but replacing the brake pads will usually (depending on your car) be much cheaper than replacing a clutch, so if we can redirect more of the wear and tear to the brakes rather than clutch, that’s a win in my opinion.

@fredpearson5204 2 жыл бұрын

I've watched a number of videos on clutch use--all of yours are very well done: clear, concise and easy to understand. Not many people teach well--you do. Cheers.

@mikeyjdavo 4 жыл бұрын

Been driving over a year. I drive lutons, transporters and cars hundreds of miles per week in my job. And I'm still learning with your videos. I wish I'd known about you during my lessons instead of the usual ones who explain potential issues but no actual detail or fine tuning. You're doing magnificent with your videos, and I'll be passing your channel to all and sundry. Keep on drivin'.

@ConquerDriving 4 жыл бұрын

Thank you ☺

@chirst5874 7 ай бұрын

I'm sorry that you have to drive in Luton

@mewfuz37 10 ай бұрын

Learned clutch in a 99 miata. First 2-3 weeks were torturously frustrating, but i finally got most of the technique down and its been 99% joy ever since. Miatas are notoriously forgiving to learn on.

@the_irate_juan8462 4 жыл бұрын

There is just some odd satisfying feeling when shifting up the gears and you do it quick enough that you catch the engine rpm on the right time/speed for the next gear and you don't get that jerking nor do you need the clutch to rev-match for you.

@ConquerDriving 4 жыл бұрын

Agreed!

@WeatherManToBe 4 жыл бұрын

It's even better when you perfectly match engine rpm and transmission when down shifting by double clutching. Because of the fluid dynamics, if your selector has a bit of play, your shifter gets sucked into the correct gear as you select it. Feels nice.

@olliebonugli8881 4 жыл бұрын

WeatherManToBe Rev matching by blipping the throttle without double clutching is more satisfying as it’s quicker imo

@WeatherManToBe 4 жыл бұрын

@@olliebonugli8881 just spent the day rev matching with just synchros and it's just not as smooth (and even slower in low gears or cold temperatures). Reminded me why I kept on double clutching lol. I don't know how I spent those couple years not doing it 😂

@varro391 4 жыл бұрын

Sadly, it's annoying to try to do it this way in the US because of the rev hang in modern cars. It's not necessarily bad, but waiting so long for the revs to drop (especially from 1st to 2nd) while everybody else is driving an automatic means you'll be slowing down the traffic behind you.

@melan6969 4 жыл бұрын

My driving has enormously improved thanks to your thorough explanation. I'm grateful

@ConquerDriving 4 жыл бұрын

You're welcome ☺

@franciscoignaciopetrone5679 4 жыл бұрын

This is actually the very first video I've stayed for 17 minutes listening and actually learning something. Good job!

@ConquerDriving 4 жыл бұрын

Thank you!

@benwatkins10xd 4 жыл бұрын

I guess bringing the revs up to 6000rpm then dumping it wont help

@ConquerDriving 4 жыл бұрын

Depends what you're trying to achieve.

@benwatkins10xd 4 жыл бұрын

@@ConquerDriving my guy x

@Alexander_l322 4 жыл бұрын

Doesn't help the driveshalfs or tyres either but its good fun

@VeyronBD 4 жыл бұрын

Mad skids is what is being achived

@chrisofelt6427 4 жыл бұрын

@@VeyronBD what I achieved was two broken spider gears in the diff

@ultiumlabs4899 4 жыл бұрын

the most detail explanation about clutch wear, thanks Richard. really helpful video.

@ConquerDriving 4 жыл бұрын

You're welcome.

@LOLZpersonok 3 жыл бұрын

Well, I'm glad I watched this video. Being a newbie to driving manual, I thought I was wildly abusing my clutch all the time by being inexperienced. Yes, I've mistakenly done some stupid things like absent-mindedly forcing it into reverse without pressing the clutch or dropping it at a high RPM a couple times, but now that I've seen this, the vast majority of the time, I haven't been destroying my clutch, and I certainly haven't overheated it, and I've never smelled it. Makes me feel a little better, because it's frightfully expensive to fix, and that's a terrifying prospect.

@djdelarosa25 5 ай бұрын

This guy is one of the best driving instructors on KZfaq. I'm subscribed for life.

@GhastUnity 4 жыл бұрын

So what I learn is to stop dumping the clutch at every red light and stop sign 👍👍😂

@ConquerDriving 4 жыл бұрын

Good advice that 😉

@Engineer9736 4 жыл бұрын

It’s just childish to dump the clutch

@henrysolomon1875 2 жыл бұрын

Genuinely incredible video. I'm very impressed with your ability to not only teach or explain, but to also show as you do things. Thank you!

@Enzocar97 Жыл бұрын

This is the most informative and life changing lesson I have ever been given on driving a manual. I just wanted to say thank you.

@Homanjer Жыл бұрын

My father taught me all of these things. I've been driving for a couple of years now (4 I believe) and I have always tried to be aware of how I'm driving so I don't put any excessive wear on the clutch. My mother and my sister don't really care and one of the things that they didn't believe, was that the release bearing can wear like that. They always stood on the clutch when at a red light and now the release bearing has been making this horrible noise for the past few months. It's still working, but I'm just waiting for it to fail. At that point the car will be scrapped anyways, if not earlier. Time will tell if the bearing can outlast the car haha

@Longshlongjon22 3 жыл бұрын

Thanks for the info just bought a manual yesterday and drove it home by-myself for over 20 miles . This video definitely going to help me when I drive again

@mr.nemlangeni263 3 жыл бұрын

Your videos helped me a lot with my driving skills.Much love from 🇿🇦

@PizzaIsLife 4 жыл бұрын

Probably the best channel out here for information. Love your work mate, keep it up!

@ConquerDriving 4 жыл бұрын

Thank you

@delciemcwhoopie 2 жыл бұрын

been driving MT for 15 years and still learned a lot from this

@djYuz 3 жыл бұрын

Thank you so much for these videos! After years of driving automatics, I bought a used manual car for cheap with 158K miles on it. After a month of learning in a hilly area, I've embarrassingly worn what was left of the clutch badly and I'm working on getting it replaced. I'll try and keep these in mind.

@abcdefghijklmno1009 2 жыл бұрын

This is EXACTLY the type of video I was looking for. Thank you. Had everything that I needed.

@vikingthedude Жыл бұрын

I've been driving for 7 years and was told about these things, but not down to the details such as "stay below 2k RPM". Definitely gonna learn more from this channel

@mistamaog 11 ай бұрын

Well it depends, if you're on flat roads, staying under 2k is good for efficiency. But going up a hill, you'll want to downshift to be above 3k or maybe even 4k depending on how powerful the car is. Going downhill you'll want to do the same as going uphill, but of course not pressing the accelerator, so you can use engine braking going downhill to not use up your brakes.

@jangajunga7839 3 жыл бұрын

Awesome video, really cleared up lot of mist for me! Keep doing these great educational videos, I love them!

@haks_123 4 жыл бұрын

2:08 i love this guy LOOOL

@ninjak79 3 жыл бұрын

Great videos, enjoyed the clear info all the way from the US. Thanks for all the hard work. Again fantastic work. Wish you were here when I first started learning standard transmission. Thanks!

@ConquerDriving 3 жыл бұрын

Thank you for the recognition 😊

@Sucker4Pain 3 жыл бұрын

The information given is really important because I’m currently struggling with driving manual and I keep stalling out but I hope I don’t break the clutch. Thank you so much

@ConquerDriving 3 жыл бұрын

You're welcome, good luck 🤞

@dariuszskiba8113 6 ай бұрын

Thank you for that video. I've been driving for 18 years now, I've had 4 cars so far and in every one of them, I had clutch problems. Thanks to this vid I know where I made the mistakes.

@Quick_Sa_Fugim 8 ай бұрын

Driver for like 20+ years and I realised that lately I'm often found myself with the foot leaning on the clutch pedal. I will work on it and hope to re-educate myself.

@swapnilkawade2286 4 жыл бұрын

Answers all the questions! Great content!

@scottsfowler 10 ай бұрын

Not sure why I clicked on this video but, you are a natural teacher! Great explanation! I've been driving clutch since I bought a 2003 Honda Civic in 2003, but never really thought about clutch dynamics and usage. I basically just felt if it was correct (smooth without over revving or choking the engine) or not. Glad I've been doing it correctly since I've only had to replace the clutch once in 20 years (yes same civic!!), and that was after the first 4 years when I was learning/intermediate. I'm getting it replaced as I type (maybe that's why I clicked!?) as it is soft now and a bit hard to start without excessive revs on steep hills. Cheers mate!

@MartinBennett-rs6thrasher 3 ай бұрын

Yes, trust your instinct if you have it. No need to get too wrapped up in 'rev matching' (very trendy term it seems currently). Like me you probably learned to drive in cars without a rev counter, no bad thing to develop a 'feel' for driving smoothly.

@bryanguegan4006 4 жыл бұрын

Omg, I learn new things very useful everyday. Thank you!

@ConquerDriving 4 жыл бұрын

You're welcome.

@nikspuri9433 4 жыл бұрын

Thank you for the video mate I was worried about clutch and ways to avoid wear of it Very helpful one mate Cheers

@ConquerDriving 4 жыл бұрын

You're welcome ☺

@micah-c 9 ай бұрын

When I was first learning manual, the guy teaching me always got on me for pushing the clutch pedal in for more then a second or so. It made driving terrible. Videos like these really help me rationalize proper clutch use

@m47kr3nt0n 4 жыл бұрын

Thanks for the video, I'll keep watching if you keep posting. I love you dude.

@ConquerDriving 4 жыл бұрын

Thank you! I'll try and keep posting.

@probalghosh6998 3 жыл бұрын

All your videos are very good mate! Keep going.

@foxymov1 4 жыл бұрын

Great videos mate found them very helpful during my journey.

@ConquerDriving 4 жыл бұрын

I'm happy to hear that!

@DiscipleN2k Жыл бұрын

Watching these videos as I await a very expensive clutch replacement to be completed. I expect my next one to last quite a bit longer after learning all the things I was doing to destroy the old one. Thanks for the great instruction!

@chirst5874 7 ай бұрын

What kind of stuff were you doing before?

@lilycollects 5 ай бұрын

same here 😂

@mekalashay7111 5 ай бұрын

Same! 🤦🏾‍♀️

@halofreak472 4 жыл бұрын

You mention some more advanced techniques to avoid clutch wear, but that you wouldn't explain them in much detail since they can be hard on newer drivers. I really like your style of teaching and would be interested in seeing a video on some advanced techniques with a manual transmission. I've been learning manual after driving an automatic car for some time, and I have found your videos extremely helpful in supplementing my learning and clearing up confusion.

@ConquerDriving 4 жыл бұрын

Thank you, I'll consider such a video.

@KubNotical69 Жыл бұрын

Fixed my shifts from 1st to 2nd thanks for the video

@novy3068 7 ай бұрын

Exactly what I needed to hear and even extra information I would have never known! Wish they taught this stuff here in the US...

@robertmyers3684 4 жыл бұрын

Great videos man, I live in the usa and you’ve been a tremendous help with learning to drive my first manual car

@ConquerDriving 4 жыл бұрын

That makes me happy to hear that. :)

@iiRaptusGaming 3 жыл бұрын

@@markf5314 That's exactly how people told me too and it's so unhelpful. Like no, it literally has nothing to do with how slowly you release it. It's all based on finding the spot where the clutch engages

@gravemind6536 2 жыл бұрын

@@markf5314 That will work in a lot of modern cars now but in older cars where the ECU will not compensate it will not work.

@0MosDefinitely0 Жыл бұрын

Super helpful video as always!

@Mr.Nabil.Belhaj Жыл бұрын

excellent tutorials, very informative explained in details

@aroyece8 2 жыл бұрын

Learning a lot from your videos. Love ❤️ from India...

@nk-he4js Жыл бұрын

this was so helpful bro thank you🙏🏾

@gravityyt4185 4 жыл бұрын

as a young person learning to drive i find these very usefull as i dont really have that much time to practice i only really drive when i have to do something its nice to learn things even though im not in the car

@ConquerDriving 4 жыл бұрын

Learning outside of driving lessons helps you learn a lot mire quickly.

@gravityyt4185 4 жыл бұрын

Conquer Driving agreed i have learnt good deal from KZfaq and just learning how it works in general

@mynamefrank6567 4 жыл бұрын

yo same, remember don't be scared to use the clutch, when I started I was scared of killing the clutch so I tried to use it the least I could, I stalled a lot because I went to slow without pressing the clutch

@ante0012va 4 жыл бұрын

I bought my first car about 3 weeks ago, the clutch is really bad. The bite point is really high up, I thought about adjusting the cable when I found out it was hydraulic. It's a 2001 nissan almera with 120,000 miles on it. I try to keep the clutch alive for as long as possible, this video actually helped. Thanks!

@ConquerDriving 4 жыл бұрын

You're welcome ☺ I hope it lasts a long time. Some cars do just have a high bite point.

@duttybass4693 3 жыл бұрын

Great tips, cheers for the video 👌

@tylermathews2250 5 ай бұрын

Very well explained, Beavo!!

@sghoshranipark 2 жыл бұрын

Not from UK, but your videos helped me a lot 💓

@ronaldperry9103 15 күн бұрын

I just wanted to confirm I’m driving good, thank you!

@domyboji 3 жыл бұрын

Thank you for such a useful video Have had to replace my clutch after a year, d'oh

@habibr4982 4 ай бұрын

@conquerdriving thank you for your help I passed my test first time!

@VSTV1993 4 жыл бұрын

With the spring load in the plate, its okay when past say 2nd gear as it smooths out easier the higher you get up the gears. I found it best just to try and get out of 1st gear as early as possible

@ConquerDriving 4 жыл бұрын

Low gears are more challenging because they have more torque. Low gears multiply torque.

@deepti9127 Жыл бұрын

thank you I wish I was shown this in my lessons more

@Sir_stellius 7 ай бұрын

I have my license for only 7 months, and I drive better than some people who have owned a car longer than me, that is because I have taught myself all these tips you talked about by observing other professional drivers

@jesusvaldes4664 6 ай бұрын

Just replaced my clutch on 2005 Toyota Corolla and when I say it was burned it was burned it literally falling apart but now that it tools me 8 hours of hard labor to do myself non stop I will definitely be driving better Thanks man I learned how to drive standard myself and I definitely mistakes I live inDallas so big city and your tips are fire 🔥 thankyou

@ericdanthon2 4 жыл бұрын

great video. I have owned 3 BMW manual cars as well as a truck for over twenty years and it's the best thing ever here in the US. I look forward to driving my z3 every day. I was self taught and still picked up some great info from your lessons. Now I drive as smoooth as I ever had. I can never do without a manual car.

@ConquerDriving 4 жыл бұрын

I'm so happy the videos have helped :)

@ericdanthon2 4 жыл бұрын

@@ConquerDriving We really do not have training for manual cars in the US at all! You pretty much learn on your own or from a friend. I really enjoy driving my beamer more than ever! I look for reasons to leave the house and drive! Thanks.

@RosaGarcia-pr9hl 10 ай бұрын

Very profesional thank you so much🙂

@starz7618 4 жыл бұрын

Would love a video about how to park in multi-storey car parks and using clutch control there etc!

@ConquerDriving 4 жыл бұрын

It should be the same as my bay parking video and slow speed clutch control video.

@DL-my2kh 3 жыл бұрын

Great video, I like how well you communicate as a teacher. I do have a question about rev-matching for upshifting as you demonstrated around 4:00. For my car, I clutch in for 1->2 but wait quite a while for the revs to drop (through my research on the web, I discovered it's called 'rev hang') but have gotten mixed answers on how to drive with it since I'm new to manual. If I want to get fully into 2 faster, is it acceptable wear to bring the clutch to the bite point quickly after shifting to pull the revs down faster to the point where it matches?

@ConquerDriving 3 жыл бұрын

Yes that's ideal, the clutch doesn't really wear when it's rev matching. Many people confuse clutch rev matching with riding the clutch, as long as the clutch is able to bring the revs down and you don't rev it the clutch will be fine. Watch my video on clutch wear.

@foxii5573 4 жыл бұрын

Great video! Thanks!

@ConquerDriving 4 жыл бұрын

Thank you.

@danielteyehuago1633 3 жыл бұрын

Thanks for sharing it

@joelthomastr 8 ай бұрын

This together with that other video with the pizza slicer has helped me to lose my fixation on friction. I had it in my head that in an ideal world I want to avoid all friction. But rev matching is necessary when changing gears and friction is the precise method the clutch uses to do rev matching. Especially when pulling away, because the drive train is starting at zero and it's friction all the way until it's up to the rpm of the engine.

@LukeNovember 2 жыл бұрын

Very insightful

@Shumayal 4 жыл бұрын

I love your videos. @Ashley Neal has got competition!

@ConquerDriving 4 жыл бұрын

Haha, thank you.

@May-qb3vx Жыл бұрын

I’ve been driving manual since I got my license 8 years ago (I’m American so it’s not near as common a skill here). My stepsister wants to learn to drive manual in my car so thank you so much for helping get together a little to-do list on things to teach her. I want her to start with good habits but since I’ve been doing it so long on my own and have never taught someone else before, I had no clue how to teach it

@johnz199709 2 жыл бұрын

Hey Richard. Really love your videos, they have helped immensely as a new driver. Just wondering if you know of any tests i can do to see if i worn my clutch. I stalled in traffic the other day and tried to do a quick start, but all i did was burn the clutch around 4000 rpm :(. There was a terrible smell for a few minutes and now im worried i may have damaged the clutch since its still in its break-in period for my new car. Thanks again.

@ConquerDriving 2 жыл бұрын

If the revs build but the car doesn't accelerate when the clutch is fully up that means the friction material is worn out.

@hafeezkhaliq7776 2 жыл бұрын

From Canada learned a lot from you may the LORD guide you on the straight path ameen keep up good work

@banton9368 8 ай бұрын

I’ve had a car for about a month and a half now, and I’m glad I searched this 🤣 I’ve basically been riding the clutch at every set of lights I’ve gone through. Probably need to change my driving style 🤣

@rafraf9876 4 жыл бұрын

great video! Love it !!

@ConquerDriving 4 жыл бұрын

Thank you

@kiefershanks4172 Жыл бұрын

I almost never (unless I really need to) get the car going from a stop with extra revs. I find I just don't need to do it with my car ('22 Corolla). I figure that will also help reduce wear. I am pretty much doing what you suggest in the video but I really appreciate the thorough explanation and also showing he kind of wear your clutch has gone through. That was an awesome addition to the video! My car has rev-matching but it defaults to "off" which is good because I like to rev-match manually. It is much more fun and rewarding. Thanks for justifying/reinforcing my clutch habits 👍

@ConquerDriving Жыл бұрын

This video may be of interest: kzfaq.info/get/bejne/i8qEhrVzr9jbZ40.html

@kiefershanks4172 Жыл бұрын

@@ConquerDriving Thanks, I will definitely consider trying your method.

@tazetutu 4 жыл бұрын

Thank you help a lot

@ConquerDriving 4 жыл бұрын

You're welcome

@Nffc97 4 жыл бұрын

Nice video! 👍

@ConquerDriving 4 жыл бұрын

Thank you.

@raymeibaum Жыл бұрын

Thanks!

@senditall152 10 ай бұрын

hope I can learn this.

@thierryvt 4 жыл бұрын

I'm not sure why i'm watching this, I haven't driven in anything with a manual for years... And I don't think i ever will again with hybrids and electric cars becoming more and more popular, especially for company car drivers (which I am). Informative video though, well done.

@ConquerDriving 4 жыл бұрын

Thank you and you're welcome ☺

@mr.t.1237 3 жыл бұрын

Automatics are 4 gays

@samahkhader4453 4 жыл бұрын

thanks . keep on going

@ConquerDriving 4 жыл бұрын

Thank you.

@MechanicsMinute Жыл бұрын

My car has never had a changed clutch and it’s been 24 years from factory with 278k miles, it locked up on me yesterday at a light and I had to shut it off and shift to 2nd and went home all the way in 2nd. I’m not surprised, I think it’s about time for it to get changed out😅

@user-mn8lz7gf6d 9 ай бұрын

It's always a surprise to me how much some people struggle with things that come naturally to me. Still feel like I learned something. I'm usually either driving my own mx-5 with a light flywheel and very light clutch or my grandmas boxer diesel subaru with fairly heavy clutch and enough torque that you don't even need the gas pedal for a smooth start. Every time I get back into my car it feels like I'm about to step through the floor. Needless to say what works on one car doesn't on the other. And the the heavy-ass Outback is still faster...

@Achannel_o 11 ай бұрын

I remember Car Throttle bought a car a few years ago that was on 540,000 miles and I believe it was still on the original clutch they do last quite a while even if you aren’t the smoothest, still it’s good practice

@momxu2521 4 жыл бұрын

Good teacher

@ConquerDriving 4 жыл бұрын

Thank you.

@Jupiter12.000 9 ай бұрын

Good Video

@InclusiveDriving 4 жыл бұрын

Great video, and quite reassuring to me as an instructor! Thanks for your time. Ps I'd like to link to your channel on my website...is that ok?

@ConquerDriving 4 жыл бұрын

Of course you can, thank you.

@Khinh-xq6lx 7 ай бұрын

when you in hill he want you let the car roll back abit and slowly build the rev from there, i felt this help, i been not letting it roll back at all but build rev consistently, short amount of time that does not damage engine

@Khinh-xq6lx 7 ай бұрын

if you have trouble driving manual watch his video you learn something from it, you wish he is your driving teacher from the very start, but you can teach yourself and get some pointers from good videos learn driving manual or any car

@neuideas 4 жыл бұрын

The best I've done so far: 2001 Cavalier, I bought brand new -- I got rid of the car at 15.5 years and 181,000 miles (nearly 300,000 km). At this time, the car had considerable corrosion, but the transmission was still functioning as well as it had when the car was new. The clutch was still factory original. I had zero maintenance or repairs on the transmission or clutch.

@ConquerDriving 4 жыл бұрын

Good car then. Although I thought it was a vectra by 2001.

@z0m123 4 жыл бұрын

That's not a burnt clutch smell, smells like....

@kryzondaan1855 4 жыл бұрын

Depends on the driving you did though. On the motorway, I regularly drive 100 miles without touching the clutch pedal. I've done 200k miles in 2 consecutive cars with no clutch or transmission issues or hardly any issues. My tips, gentle starts, no holding on the bite ever except for 1 second before I move, no reversing up hills where possible I will park further away in preference to this. No pointless shifting forward half a car length in a queue unless other cars need to get the benefit, espevcially on upward hills. And I freewheel down gentle hills in a queue so I don't have to use the clutch to move . It amazes some people the reliability I get out of the whole car, the way many drive theirs makes me cringe, reliability and longevity and influenced significantly by driving style. My clutch felt a bit different a few years ago after having to reverse up a big hill, I told my mechanic who said it was overdue a clutch. 5 years later still no sign of issues.

@neuideas 4 жыл бұрын

@@kryzondaan1855 Mixed driving, probably 70/30 highway/city.

@davidellis8141 4 жыл бұрын

John Cole so did I, not so many miles but 2 clutch cables, same corrosion problem.