No video
What you need to do a Z20LET / Z20LEH (VXR/GSI) to a Corsa C
Рет қаралды 37,491
Күн бұрынYo guys!
Welcome to my channel.
Thank you all for the support and I can't wait for you all to see the upcoming content!
Apologies for the lack of content provided but I'm back!
I'm setting up a donation page for my project cars. I'd really appreciate if you could donate, it doesn't matter the amount as I'm willing to also use my own money on doing these projects as I know you guys will love to see the full ins and outs, in every detail of these projects!
Email - Anthonyhak@yahoo.co.uk
Instagram - _anthonyhak
TikTok - _anthonyhak
PayPal - www.paypal.com...
All donations given will go toward the channel and the channel ONLY, as well as investing my own money as well.
@jorritkooistra1624 2 жыл бұрын
You can run full Astra hubs on a Combo/Corsa C. I did that on my Z20LET Combo. It all bolts up if you use the right bits. Running Astra hubs is better and safer as there are no conversion hubs required, only stock parts. The you can also use Astra coilovers for the front, Astra brakes etc.
@TheVerseCity 2 жыл бұрын
can also run Meriva 1.7 cdti hubs/knuckles for 5 stud and use corsa coilovers. The 1.7 cdti hubs are suited for f23 and have the same strut mounting as corsa C where as astra is wider. Running the astra ones is a cheap way to get it running, abs and speed sensor loom need modding to run astra hubs, ball joint from astra, tie rod needs modifying to put the astra tie rod end on and the speed sensor doesn't read correctly on the astra setup. Also means you have to run a mix-match of suspension with the astra setup.
@jorritkooistra1624 2 жыл бұрын
@@TheVerseCity No you can run all Astra running gear without issues and without mixing and matching. Speed reads correctly to. Only have to solder the ABS loom. You can use a factory tie rod end to if you know which one to use. At 100kmh on the speedo the GPS reads 97. So same as per factory. The ABS works fine too with Astra hubs on the Combo.
@TheVerseCity 2 жыл бұрын
@@jorritkooistra1624 No, I didn't say you cant run the astra running gear, but most people dont wany mismatched suspension... You have to use astra tie rod end and astra ball joint if you dont want to bodge it on.
@jorritkooistra1624 2 жыл бұрын
@@TheVerseCity No bodging required, there are factory parts available that bolt straight in. And its not mismatched as I already mentioned its all Astra running gear. As per factory, bolts straight on
@MrLoopynutter Жыл бұрын
Hi, I want to do this conversion to my combo, what parts are needed to make astra knuckles fit?
@adamcartlidge8891 3 жыл бұрын
Fuel lines on the rail should be piped up the other way round. Return to to tank is the one with the steel pipe on already(fuel ref side of the rail. And feed is the other one that goes straight in to the fuel rail.
@petermport Жыл бұрын
Use the 1.7 cdti knuckles with cavalier bearing and hubs, straight fit if zero machined parts that weaken the hubs, If you google "corsa c rally hubs" I wrote a how to a few years ago with part numbers etc
@nirmalpindoria9406 Жыл бұрын
Yes bro, I'm currently in the process of starting a z20 conversation. Using your videos as a guide as it's my first build. Hopefully we can keep in touch, I may need your expertise lol
@Zoomb1kes Жыл бұрын
Thank you bro just message me on Instagram anthonyhak_
@jacksrcat 3 жыл бұрын
The hubs are cav hubs what have been machined down by a company in Leicestershire, the proper way to go is 1.7cdti knuckles which fit the bigger cav bearings and hubs. The conversion hubs are cav hubs what have the large 2.0 driveshaft splines but have been machined down to fit a standard corsa wheel bearing and knuckle, they’re pretty dangerous as the thinner part snaps when the wheel bearing starts to go.
@Zoomb1kes 3 жыл бұрын
Thank you
@petermport Жыл бұрын
I wrote the how to on the corsa-c forum on how to use cdti hubs and cavalier bearing and hubs, If you google "corsa c rally hubs" it will come up
@huskyte6105 2 жыл бұрын
Brilliant vid mate , your valuable info would cut many hours of head scratching out of such a build.....well done 👌
@Zoomb1kes 2 жыл бұрын
Thank you mate 👌
@IoannisNtentopoulos 2 жыл бұрын
what an amazing video m8, thank you ! seems till now everyone was like "yeah, its like witchcraft to pull something like that" etc etc ... ur video is straight forward and explains everything ! Again, thank you for your effort and your "insider information" :)
@Zoomb1kes 2 жыл бұрын
Thank you mate I appreciate it
@jcsonone Жыл бұрын
Nice video. Earned a sub from me. With being a Z20leh corsa c owner
@Zoomb1kes Жыл бұрын
Thank you I appreciate it brother
@Zoomb1kes Жыл бұрын
I will be back filming soon I'm going to do a z20 corsa d video at some point and hopefully I can get it to work 😅
@RG-go2oz 3 жыл бұрын
Very nice work bro. Deffo earned a sub!
@Zoomb1kes 3 жыл бұрын
Thank you
@patrickdeehan2512 3 жыл бұрын
Great vid good information and presentation. Keep up the good work .
@Zoomb1kes 3 жыл бұрын
Thank you 😊
@iainwilson7836 3 жыл бұрын
I’ve got a full Astra vxr and looking to get the engine put into a corsa C. I would let wherever I take it keep the rest of the Astra also 👍🏻
@timbecks81 5 ай бұрын
Hello mate, stumbled on ya vid, was wondering if u finished this build or not, as il be interested to see it come together, all the best mate 👍
@Zoomb1kes 5 ай бұрын
No mate but I will do 1 soon I've built loads
@justtest9925 2 ай бұрын
Great video can you list all parts in comments please I’ve got a 1.2 and looking to put a z20let in it
@rickyharrison4431 Жыл бұрын
I'm pretty sure but worth checking but early meriva vxr is 4 stud if I remember correctly loved the video mate
@Zoomb1kes Жыл бұрын
Thank you bro
@Josephch11 3 жыл бұрын
Nice video, I’ve heard the corsa c / combo 1.7 diesel hubs are a direct fit to the driveshafts as well, I’ve got a combo c Petrol here that I’m converting!
@Zoomb1kes 3 жыл бұрын
Thank you mate that's good to know I have a diesel corss might give it a try
@mkdundee4785 2 жыл бұрын
Need this video but for a corsa b
@avayaguru6679 3 жыл бұрын
Really nice video, mate.
@Zoomb1kes 2 жыл бұрын
Thank you
@matthewmorton3333 2 жыл бұрын
Alfa Mito hubs are 4 stud✌️
@DarraghCAE86 3 ай бұрын
Need one of these videos for Corsa B…anyone know is there one?
@2KXMKR 2 жыл бұрын
Great video mate very informative. I've had a 1ltr for years and I'm just now starting to think of doing something silly with it. What are your thoughts on the Z20LET vs B204 debate? I've heard the Z20LET is the more expensive route but the B204 is just as rewarding getting up to 350bhp from a stock engine with a turbo upgrade. Cheers.
@Zoomb1kes 2 жыл бұрын
Thank you mate, I've heard people run 500bhp on these b204 but unfortunately I don't really know them engines
@totalgroundscareltd2884 2 жыл бұрын
Have you got a guide for a conversation on a 1.7cdti ? It seems alot of the parts are from a 1.7 so wasnt sure if that would be easier. Using 1.7 box and hubs and stuff
@Zoomb1kes 2 жыл бұрын
Chnage the fuel tank to a petrol tank the diesel plug should plug straight into the petrol pump no problem Chnage the fuel lines to a petrol lines Then you just need to fit a z20 engine as you should already have a f23 gearbox Use the z20 ecu, key chip and transponder All the gearbox related stuff is already there hubs shafts ect so that's all fine its just the engine use the 1.7 starter motor alternator cable to the battery on the z20 engine other then that the guide is the same
@jordanmynett7007 2 жыл бұрын
What kind of price do you reckon it would be ?
@jamie2502 Жыл бұрын
Hiya how do you go about the purge vent valve that the gsi have
@Zoomb1kes Жыл бұрын
Of the top of my head I'm sure the corsa 1 is the same
@jasonsoobramoney3243 7 ай бұрын
Will this work on a utility
@ridertwix5755 3 жыл бұрын
Hi. The conversion hub is from a Astra f , Vectra a and Calibra 2.0l 90251816 326184 is all the Same one.
@Zoomb1kes 3 жыл бұрын
thank you
@michaeljames6434 3 жыл бұрын
Hi great video you say you can use the 1.0 or 1.2 ecu were can I get the map flashed over to it
@Zoomb1kes 3 жыл бұрын
Hello mate you can get a mapping company to do it or someone from vauxhall to do it
@Viking-Home-Mechanics Ай бұрын
I have a 1.7 combo, I would like todo this conversion does it work the same as the corsa set up as there the same front end?
@Zoomb1kes Ай бұрын
@Viking-Home-Mechanics yeah but you would need the z20 ecu
@Viking-Home-Mechanics Ай бұрын
@@Zoomb1kes ok tidy cheers mate I will get the plan rolling
@Zoomb1kes Ай бұрын
@@Viking-Home-Mechanics and I think people use a corsa fuel tank also have a look online though
@Viking-Home-Mechanics Ай бұрын
@@Zoomb1kes thanks mate I’ll check that out
@apostolis633 2 жыл бұрын
Do one for the astra g my bro!
@Zoomb1kes 2 жыл бұрын
I will be honest I'm not to sure about the g but I would assume it will be similar if anything easier is it a petrol
@Realbadmanye Жыл бұрын
U can run 4 stud meriva hubs,f23 box out meriva,with meriva shafts all fits proper
@mikechapman8810 8 күн бұрын
Hi! sorry for the google translation...do you have the connection diagram for the engine harness? and did you modify the accelerator pedal? thank you! and nice job
@Zoomb1kes 8 күн бұрын
@mikechapman8810 Hi if you have the corsa with the z12 or z10 xep you just need to use the standard corsa starter motor and alternator part of the loom the rest of the car is just the standard z20 loom
@mikechapman8810 8 күн бұрын
@@Zoomb1kes ok thanks you! at the time I swapped a z20 for a 1.8 gsi and the original accelerator pedal didn't work but suddenly with the 1l and 1.2l it's easier
@Zoomb1kes 8 күн бұрын
@mikechapman8810 yes that's correct the z20 ecu and the xep exu are the same
@mikechapman8810 8 күн бұрын
@@Zoomb1kes ok! thank you for your help! and so you didn't post a video of the Corsa to finish?
@Zoomb1kes 8 күн бұрын
@mikechapman8810 yeah the only 1 that didn't get finished
@kjaques1 2 жыл бұрын
Amazing video really helpful thankyou. Can I ask where you got your handbrake cables from for the SRI rear disc.conversion? Almost impossible it seems as dual lines wont fit centre section for 1.7 di diesel conversion. Many thanks.
@Zoomb1kes 2 жыл бұрын
I use the 1.8 Sri hand brake cable
@kjaques1 2 жыл бұрын
@@Zoomb1kes Ive got an early 2002 1.7 di Corsa and the handbrake brackets on the actual car are different its seems. Axles set up superb though. Many thanks.
@Zoomb1kes 2 жыл бұрын
@@kjaques1 oh sorry you need the whole 1.8 Sri axle there hard to find or make custome brackets
@williamdoyle7539 Жыл бұрын
Do the Astra gsi drive shafts work for the Z20let and f23 with the hubs u mentioned ?
@MrLoopynutter Жыл бұрын
Hey great video, I'm thinking about doing this conversion to a 1.4 petrol combo, do you know if zafira gsi parts can be used instead of astra ones? If they'll fit the same then I might buy a complete car so I get everything in one package, astra gsi's are harder to find and more pricey, thanks
@stevenframe317 2 жыл бұрын
Is there any wiring needing or is plug and play with the 1.0 or 1.2 dash looms ?
@Zoomb1kes 2 жыл бұрын
You plug the standard 2.0 loom Into the standard 1.0 / 1.2 ecu then it would require a map to make it run
@martingeorgiev4176 2 жыл бұрын
Mine is corsa c 1.2 75hp, and almost of the people told me with this engine you can't do anything, that mean i must change the whole engine if i want to do 200hp for example ?
@jln1 2 жыл бұрын
Obviously a 1.2 pushing 75 will need swapped or turboed if you want more power
@stevenhargreaves1436 2 жыл бұрын
How did you get your temperature gauge to Work
@Zoomb1kes 2 жыл бұрын
Once the ecu is mapped it will work
@nigelwals7448 2 жыл бұрын
Im searching someone who knows what you need to swap a Z20LET in a astra g ! Do u know by any chance?! I was think to but a zafira to swap everything over but idk if u can use the engine mounts and harness
@Zoomb1kes 2 жыл бұрын
I don't know 100% but as far as I'm aware the fuel return lines would already be there and hubs won't need to be changed I could be wrong but it's just swapping the engine over with the original z20let mounts but get a z20let ecu with transponder ect
@eazygfx4815 2 жыл бұрын
You said Z20LET Driveshafts, noe just to make sure. I’m buying a Z20LET + F23 out of a Zafira, comes with driveshafts so i can just use these? I thought i needed driveshafts out of a astra
@Zoomb1kes 2 жыл бұрын
It doesn't matter the zafira gearbox has a longer 5th gear but is the same gearbox but the driveshafts are the same for the f23
@eazygfx4815 2 жыл бұрын
@@Zoomb1kes awesome! Thank you!
@Burgstaller007 3 жыл бұрын
Hello there mate,thanks for the gr8 video..I thumbed it up an prescribed to stay in the loop! I've got 1.2sxi corsa c but I haven't got garage or expertise to convert my car to 20 zlet. If I buy all the parts required for the conversion, can you recommend any places that will be happy to do the conversion and do a gr8 job of it?
@Zoomb1kes 3 жыл бұрын
Hello I can do the conversion where are you based?
@mrussell4131 2 жыл бұрын
@@Zoomb1kes hi m8 I have a 1.4 sri how much do you charge to convert ?
@Zoomb1kes 2 жыл бұрын
@@mrussell4131 hello do you have all the parts ? Message me on Instagram anthonyhak_
@nastyham5302 2 жыл бұрын
What's the rough cost of a garage doing this minus the cost of the new engine?
@Zoomb1kes 2 жыл бұрын
All garages labour rate are different mate
@RecklessGenesis 2 жыл бұрын
I got a qeustion , I build in a z20let in my 1.6 . I bought engine bay loom , internal loom , all wiring is now z20let inside and out . engine is in . But now my starter motor wont even turn when i turn the ignition switch . i litterlay converted everything i can . when i hook the starter up the battery it works . so its not the starter . and my electric windows stopped working for some reason . im fucked ....
@Zoomb1kes 2 жыл бұрын
When you turn the key are you getting power to the relay ?
@RecklessGenesis 2 жыл бұрын
@@Zoomb1kes i tested the starter motor striaght on the battery with a separate wire , it would spin without expanding the Gear ( they do that with only power ) . My Friend would sit in the car turn the key so the extender pushed the Gear into the flywheel . Then it cranked ... Possible i bought a bad loom for under the Hood ?
@Zoomb1kes 2 жыл бұрын
@@RecklessGenesis possibly yes but it's hard for me to try help you with out having a look my self do you have a good earth
@RecklessGenesis 2 жыл бұрын
@@Zoomb1kes i rekon , since all other things work . Exept the Windows . They stopped also after putting in the new loom , checked the fuses also . I wont give up but its a pain in the head 🙈
@Zoomb1kes 2 жыл бұрын
@@RecklessGenesis hmmm 🤔🤔
@craigbailey2535 3 жыл бұрын
What did u do about alternater as it catches on the body of the car
@Zoomb1kes 3 жыл бұрын
It should just miss have you pulled the engine foward
@lummy321 6 ай бұрын
Is this similar with the corsa d?
@Zoomb1kes 6 ай бұрын
No nothing near the same 😭
@Comitis840 2 жыл бұрын
Does this also apply to the 1.8 Z18XE GSI/SRI ? I was wondering what would be more rewarding. Turboing the 1.8 for abot 4000 Euros at Dbilas Dynamics, or buy a good Z20LET for about 3000 Euros, plus all the other stuff. Moneywise, it would make no difference, but I think a Z18XE Turbo would be more genuine, as it came with the sporty GSI version. But a Z20LET would be cool for getting more power. Im kinda unsure.
@Zoomb1kes 2 жыл бұрын
Wouldn't know tbf
@LexTNeville Жыл бұрын
Just go for the Dbilas inlet mani for Z18 and remap, then spend the savings on handling parts and trackdays. You'll get 160 reliable NA horses.
@Suttybutty 3 жыл бұрын
Hi mate just read that you can do the conversion ?
@Zoomb1kes 3 жыл бұрын
Hello yes I can
@Suttybutty 3 жыл бұрын
@@Zoomb1kes where about a you based mate and what kind of price we looking at cheers
@Zoomb1kes 3 жыл бұрын
@@Suttybutty I'm based in Bracknell rg121rl message me on Instagram mate @Anthonyhak_
@gasman5697 2 жыл бұрын
Great video. Was wondering if I could contact you personally to talk about a project iv just started. It sounds like you are the man with Corsa c conversion. Advice greatly appreciated
@Zoomb1kes 2 жыл бұрын
Yeah no problem hit me up on instagram anthonyhak_
@gasman5697 2 жыл бұрын
Than you for the very fast reply. Unfortunately I'm a bit of a technophobe and not on social media is there any other way of contacting you
@gasman5697 2 жыл бұрын
Basically I have a corsa c van 1.7di Isuzu and have bought a zafira with z20leh all running nice car. With the plan on having a rapid work van like in the rs turbo fiesta vans back in the day.
@Zoomb1kes 2 жыл бұрын
@@gasman5697 the only thing extra you need to do it use a petrol corsa c fuel tank
@Zoomb1kes 2 жыл бұрын
@@gasman5697 and change all the fuel lines
@amber-leaf-kieth 2 жыл бұрын
What alternator should be on the z20let in a corsa c conversion please ? Tia ✌👌
@Zoomb1kes 2 жыл бұрын
Standard gsi z20let alternator
@amber-leaf-kieth 2 жыл бұрын
@@Zoomb1kes thank you! is that the 100 amp one yeah I've bought one half built an it needs it replaced an just didn't know if that was the one off the z20let..
@Zoomb1kes 2 жыл бұрын
@@amber-leaf-kieth yeah 100amp or 120amp will be fine
@amber-leaf-kieth 2 жыл бұрын
Another quick question mate my corsa has the z20let ecu an clocks don't work do I need the a corsa ecu for them to work thanks
@Zoomb1kes 2 жыл бұрын
@@amber-leaf-kieth good question not 100% sure on that I would just use the standard corsa ecu with a map
@tanakacraig3195 3 жыл бұрын
I can’t find my idle control valve wiring on my Z20le ,can u help me out ?
@Zoomb1kes 3 жыл бұрын
What's app me
@michaelcordes 3 жыл бұрын
Will this be the same for a z16ler? I have a Corsa car answer to put the engine in a Corsa c. Any advice would be greatly appreciated
@Zoomb1kes 3 жыл бұрын
As far as I'm aware you can run the f23 box on that engine it's just a different engine mount and different ecu
@michaelcordes 3 жыл бұрын
Thanks for getting back to me so many people claim to know but seeing your work I can tell you know what your talking about. I've got the complete vxr to use as a donor. Just wanted to be sure before I rip it to pieces
@Zoomb1kes 3 жыл бұрын
I'm 90% sure because the 16ler has a m32 box 6 speed and the z20let/leh is the same gearbox and you can change the box to a f23 5 speed you just need to change the flywheel and clutch kit so if that can be changed the block set up on the ler must be the same sort of set up just needs the let ecu or of its a 1.2 corsa you can probably use the same ecu just need a let map
@Zoomb1kes 3 жыл бұрын
And use the ler engine mount everything else will be the same on the video
@nickstapper1468 Жыл бұрын
Where can i find your build?
@Zoomb1kes Жыл бұрын
Hasn't been started yet
@nickstapper1468 Жыл бұрын
@@Zoomb1kes keep us updated man! Im curious how much work it really is!
@cdent_tuning6396 3 жыл бұрын
Iv got a 1.6 astra g with z20let in it would i be able to use everythink from the astra to convert to corsa or would i still need mounts
@Zoomb1kes 3 жыл бұрын
You would have most of it tbf it's just the rear gearbox mount you need
@cdent_tuning6396 3 жыл бұрын
@@Zoomb1kes cheers mate
@krissimpson8162 2 жыл бұрын
Is everything the same as on Corsa b aswel?
@Zoomb1kes 2 жыл бұрын
I don't think so mate no
@krissimpson8162 2 жыл бұрын
Do you know of any videos with as much info as yours on the b?
@Zoomb1kes 2 жыл бұрын
@@krissimpson8162 I'm afraid not mate maybe someone in the comments can help you
@ImForm1 Жыл бұрын
Hi I’m just away to do a z20let swap in my Corsa c 1.2, what looms do I need to use, will I have to get ones made up or can I use z20let looms?
@Zoomb1kes Жыл бұрын
Z20let mate
@ImForm1 Жыл бұрын
@@Zoomb1kes is is just engine looms I need to change or all of them from inside car aswel?
@Zoomb1kes Жыл бұрын
@@ImForm1 just the engine
@ImForm1 Жыл бұрын
@@Zoomb1kes okay thankss
@ImForm1 Жыл бұрын
@@Zoomb1kes hi sorry is it the fuse box loom?
@sebestyendavid1977 3 жыл бұрын
The 1.2 twinport makes a difference in case of wiring or the same as the 1.2?
@Zoomb1kes 3 жыл бұрын
It's the same mate
@sebestyendavid1977 3 жыл бұрын
thank you, i searched for it everywhere
@nicolaeparaschiv6599 2 жыл бұрын
De ce porți mască
@Zoomb1kes 2 жыл бұрын
I don't understand sorry
@raephluckins8587 3 жыл бұрын
🤙🏻🤙🏻
@Zoomb1kes 3 жыл бұрын
🤟
@leary1051 3 жыл бұрын
How much would you charge for this conversion? Been wanting to z20 or 1.8 mine. But no room in my workshop due to all the minis. No room to do a conversion
@Zoomb1kes 3 жыл бұрын
Hello erm there's not really a set price it's done by the hour
@leary1051 3 жыл бұрын
@@Zoomb1kes everyone has a price
@leary1051 3 жыл бұрын
@@joey8313 not when its being turbocharged🤌🏼.
@thefreedomguyuk 3 жыл бұрын
@@joey8313 If the 1.8 is healthy, the Corsa isn't slow at all.
@luigibutoi7238 2 жыл бұрын
@@Zoomb1kes do u think u can put a z20 in a corsa D 2008 ? Im really interested in that swap uno
@GhostTrader37 3 жыл бұрын
What drive shafts are they???
@Zoomb1kes 3 жыл бұрын
Standard gsi/vxr shafts
@GhostTrader37 3 жыл бұрын
@@Zoomb1kes thanks, im just about to start removing my 1.2 engine... z20 of to rnd for a build and map
@Zoomb1kes 3 жыл бұрын
That sounds good 👌 show me once it's done
@Zoomb1kes 3 жыл бұрын
@R FX yeah instagram _antec
@mwpriem 3 жыл бұрын
Can you use a F23 gearbox from a corsa c 1.7cdti
@JD_Understeers 3 жыл бұрын
Yes bolts straight onto the engine I believe
@mwpriem 3 жыл бұрын
@@JD_Understeers will the gear ratio's be a problem?
@JD_Understeers 3 жыл бұрын
@@mwpriem diesel ratios are longer than the petrol ones, the Astra GSI one is often thought to be the best ratio and is the one in using, zafira gsi has the shortest ratio but a lot of people use the diesel ones as they’re a bit cheaper, and the ratios won’t make a massive difference in a small light car with the power from the z20 engine. The only f23 box you can’t use is the one from the z22se as it has a different bell housing
@mwpriem 3 жыл бұрын
@@JD_Understeers thanx for the reply.
@JD_Understeers 3 жыл бұрын
@@mwpriem no worries, any more questions you can message me on Instagram @project_z20_c and i can try and help you out
@michaelcordes 3 жыл бұрын
Corsa vxr*
@scotty1004 Жыл бұрын
What happened to this build mate ?
@Zoomb1kes Жыл бұрын
It got sold mate due to new job but it might return just finding a corsa
Fabiosa Best Lifehacks
Рет қаралды 20 МЛН
Mechanical Nightmare
Рет қаралды 754 М.
OFFICIALLY GASSED - OG
Рет қаралды 88 М.