Whelen ION TRIO Surface Mount Warning Light

Рет қаралды 9,202

8 жыл бұрын

sirennet.com/store/product/whe...
The Whelen ION TRIO Surface Mount Warning Light is a linear tri-color warning light that includes six red Super-LED, six blue Super-LED, and six white Super-LED installed on a PCB board with a clear optic collimator and clear non-optic lens. The I3SMJC light has an internal flasher with 33 Scan-Lock flash patterns including steady burn with seven Modes of Operation and white override feature. Some flash patterns meet California Title XIII. The I3SMJC also provides a synchronize feature. The hard coated lens provides extended life/luster protection against UV and chemical stresses. The lens has a liquid injected molded silicone gasket to be resistant to water, moisture, dust, and other environmental conditions. The I3SMJC light has a die cast black powder coated surface mount housing. The I3SMJC comes with a 12" unterminated pigtail. Included is a horizontal surface mount kit with mounting hardware.
Feature:
Tri-color warning light with six LEDs of each color.
Internal flasher with 33 Scan-Lock flash patterns including steady burn with seven Modes of Operation and white override feature.
Some flash patterns meet California Title XIII.
Synchronize feature included.
Die cast black powder coated surface mount housing.
Comes with a 12" unterminated pigtail.
Included is a horizontal surface mount kit with mounting hardware.
Specifications:
Voltage: +12 VDC
Size: 1.4375” H x 5.624” W x 1.00” D.
Amp Draw: 1.00 Amps Peak / 0.40 Amps Average
Lens Color: Clear
Whelen Five Year Warranty
I3SMJA, I3SMJC, I3SMKC, I3SMMC

Пікірлер: 32

@benjaminvice6241 6 жыл бұрын

I really love Whelen products.

@SIRENNET 6 жыл бұрын

They're amazing! :)

@brandonh5201 7 жыл бұрын

These things have been out sense 2016? How am I just finding out? And now I seen that there's a dash light Verison.

@lovesiren6008 8 жыл бұрын

very good Light‼︎ I love SIRENNET‼︎

@SIRENNET 8 жыл бұрын

+島村博美 Thank you very much :)

@LeSedici 4 жыл бұрын

@@SIRENNETWhat would be your best recommendation, Whelen Ion or a Feniex Fusion?

@SIRENNET 4 жыл бұрын

@@LeSedici What's your planned application?

@LeSedici 4 жыл бұрын

@@SIRENNET Have a 2019 Scat Pack Dodge Charger, trying to stay low profile so the few lights on it will have to pack a punch. 2 surface mount on the grille, Whelen Par28 drive/warn to replace factory fog lights, 2 surface mount on a front intersection bracket, and 2 surface mount on a rear license plate bracket. Controlled by a Feniex Full Function. Will be combined with typhoon, hammer, and speed turtle 2.0 head/taillight flasher

@SIRENNET 4 жыл бұрын

@@LeSedici Sounds like an awesome project & setup. For the light-heads, granted there's a lot of options, we'd suggest going with any of the following-

@RoyanGreenwood23 8 жыл бұрын

Will Sirennet give us viewers a tour around the shop and a behind the scenes :)

@SIRENNET 8 жыл бұрын

+Royann Greenwood We'll present the idea to our Production Team. You never know :)

@znovosad555 8 жыл бұрын

Is there an interior dash version of this? I like the fact that I could have multiple colors and change them when needed

@SIRENNET 8 жыл бұрын

+znovosad555 Not currently... But you never know what will come this Summer :) The TRIO Dual Avenger would be a great option for front Tri-Color Lighting. sirennet.com/store/product/whelen-avenger-trio-dual-linear-super-led-dash-deck-light

@znovosad555 8 жыл бұрын

+SIRENNET well hopefully they do! It really appeals to the east coast volunteers for sure! In case you go up in officer ranks and go from blue to red. Thanks for the info!

@Bcr3106 7 жыл бұрын

Have you guys done this where it is tied into the reverse light circuit?

@SIRENNET 7 жыл бұрын

We sure have. It works great and really lights things up behind the Vehicle.

@joshuatillinghast6444 5 ай бұрын

So I have noted that white can override for reverse or scene lighting mode. Can I use the red wire as a brake light trigger while wanting blue as my warning color for my POV to the rear? I would love to have it on my FPIU I use for fire calls mounted in the rear window shrouds. Would tie the white and red into factory wires L/R side and the blue would be switched on/off.

@SIRENNET 5 ай бұрын

Yes, you can set Red to steady and wire it into the brake light trigger.

@joshuatillinghast1916 5 ай бұрын

@@SIRENNET Thank you!