Рет қаралды 15,189
The Whelen Legacy SOLO WeCan Lightbar was designed from the rugged extrusion up to maximize the performance of the hottest LED on the market. With a lower profile than the Liberty but with increased intensity puts the Legacy a step ahead of all other lightbars on the market today.
The LED modules in this lightbar use Whelen's Diamond Optix (Patent Pending) linear reflector optic design. The newly designed, high-output one-piece linear combo "Multi-Angled" corner modules produce light forward and rear and at the critical 45° angles. These four combo modules produce 360° of warning signal.
The Legacy works "plug and play" with the CenCom Sapphire or CanTrol controller. A WeCan controller module is supplied for use with other switch centers from the lightbar. One piece UNI-DOME construction with a single sealing point. Each dome slides onto the aluminum extrusion and wraps around all internal components while the wiper seal protects your lightbar from the worst elements. Center divider(s) with LIM (Liquid Injection Molded) wiper seals assure lightbar integrity in all conditions. Hard-coated dome lenses shrug off environmental UV damage from the sun, salt and road chemicals. The Aluminum top shield stays cool to the touch, protects the lightbar from nature's elements such as hail and The Aluminum top shield also provides passive solar radiation to direct heat away from internal components to insure long life and reliability.
This is a Special Order item. Special order items are non-cancelable, non-returnable, and non-refundable. All sales for special order items are final.
Features:
Lower profile than the Liberty but with increased intensity puts the Legacy a step ahead of all other lightbars on the market today.
Height without mounting feet is only 1-5/8 inches.
Diamond Optix (Patent Pending) linear reflector optic design.
Whelen's exclusive Collimator patented design captures, collects and focuses light for unbeaten light output.
Newly designed, high-output one-piece linear combo "Multi-Angled" corner modules produce light forward and rear and at the critical 45° angles.
Optional take-downs are available in 3-LED or 6-LED modules.
Optional alley or DUO+ integrated alley and warning light module ensures no dead spots or gaps, 360° of contiguous light.
Advanced Thermal Design "ATD" reduces the stress on the LEDs themselves, when the dwell time of the LEDs is extended.
Legacy works "plug and play" with the CenCom Sapphire or CanTrol controller.
A WeCan controller module is supplied for use with other switch centers from the lightbar.
Legacy comes standard with a photocell to automatically dim at night and still meet SAE Class I requirements in low power mode.
The I/O board snaps into brackets, and is wired directly to each lighthead to create a clean look and easy serviceability.
One piece UNI-DOME construction with a single sealing point.
Each dome slides onto the aluminum extrusion and wraps around all internal components.
Aluminum top shield stays cool to the touch, protects the lightbar from nature's elements.
Center divider(s) with LIM (Liquid Injection Molded) wiper seals assure lightbar integrity in all conditions.
Hard-coated dome lenses shrug off environmental UV damage from the sun, salt and road chemicals.
Dimensions without feet: 11 5/16" (287mm) Wide x 1 5/8" (41mm) High.
Dimensions with feet: 12 11/16" (322mm) Wide x 3 13/16" (84mm) High.
Standard lengths: 44" (110cm), 48" (123cm) and 54" (136cm).
Whelen Five Year HDP (Heavy-Duty Professional) Warranty on LEDs