When & How To Use The HP Foot & Plate

Рет қаралды 87,586

5 жыл бұрын

Janome's HP Foot & Plate will give you that scant 1/4" you've always wanted. This foot is great for making Half-Square-Triangles, Curved Piecing, and Edge Stitching!
To learn more about Stitch Plates and Bobbin Cases: • Tips + Tricks: Bobbin ...
To learn more about Auto Pivot: • When & How To Use Auto...
To learn more about AcuFeed Feet: • Janome AcuFeed Foot Op...
To learn more, visit: www.janome.com/

Пікірлер: 111

@TheKjoy85 Ай бұрын

I'm a quilter and I can see how helpful these feet and plate could be for both my piecing and the quilting process.

@annasipinski2468 3 жыл бұрын

Thank you This is sooo needed during Covid times as sellers are not able to provide in person instructions for new machines. New machines have so many options and we need to fully utilize them to get great results making our projects! Thank you! Looking forward to other online tutorials! Anna

@barbo1106 Жыл бұрын

Great tutorial! Thank you so much. 🙂 I'm so glad to find tutorials for my machine--I will make more time to build my confidence with these tutorials. It's easier for me to learn by watching and listening.

@kathybarry2556 2 жыл бұрын

Thanks for this tutorial, very informative. My machine doesn't have the HP plate, but I'd love to have it, it looks great. I know the MC6700P has it too, I love that machine, I'd love to have it, even though I love my MC 8200 QCP too. If I could, I'd get the 6700 in a heartbeat and have both of them and would love them both ☺

@karendarrall2196 2 жыл бұрын

Great tutorial, you give a very relaxed and confident lesson - I feel my quilting will go to the next level with this interesting in-depth exploration into the HP plate etc, thank you.

@lucilleball5970 5 жыл бұрын

This is the first I have heard and seen the HP2 foot. And I found it very helpful watching you use both of these feet. I will have to use the HP foot for my piecing now. Thank you again Miriam, love these video tutorials.... Claudia

@patfrontuto5342 5 жыл бұрын

Hi, I just noticed your name, and I live in Jamestown, NY where everything is about Lucille Ball! I ordered the HP2 foot for my 15000 to quilt with now. I hope you enjoy it with your HP plate and Happy sewing. Love your name!😀

@lesliesieburth1227 Жыл бұрын

Nice video, but it was not clear (to me) what is meant by the "inside" of the foot, and it seemed like that phrase first referred to the outer edge of the foot (away from the needle), and then at the end of the video to the edge of the foot nearest the needle. Please clear up my confusion!

@maryscarnecchia984 Жыл бұрын

Thank you for this fabulous tutorial! You explained everything so clear!

@suebean3873 3 жыл бұрын

Thank you for that. Very informative. So easy to listen to!

@debjacobson9800 4 жыл бұрын

Thank you Miriam 🔷

@jackieremis6533 2 жыл бұрын

Great Video! Please do a few videos using the accufeed on fabrics such as cork or vinyl for those of us who are Bag Makers. THANKS

@marionbartley214 Жыл бұрын

Thank you for this tutorial It was very informative.

@joyrussell3081 4 жыл бұрын

Nice demo, looks easy to operate.

@ishaggydiggitydog 2 жыл бұрын

Seems nicely made

@rochellenowik9875 6 ай бұрын

great presentation of info

@RobinSpindt Жыл бұрын

Thank you

@donnadailey5062 4 жыл бұрын

What is the best source to purchase the HP 2 foot? Does the plate come with the foot or is there a separate purchase? And what is the MSRP? Can't wait to try this out. Thanks for a great tutorial. Such a pleasant voice, appreciate your being straight to the point. :)

@anneericsson8755 4 ай бұрын

Great tutorial. I would love a how to on the machines embroidery to make labels not using an embroidery machine. Hope that makes sense.

@nanmckee54 2 жыл бұрын

Great video! Can I use both of these HP feet on my Janome 7700?

@macolemarn 4 жыл бұрын

Do the feed dogs (on the upper main screen) need to be put on? No videos I’ve seen have addressed the settings on the home screen. Thank you in advance.

@eleanorevans6786 Жыл бұрын

I understand more about the HP2 foot and plate. The 1/4 inch foot seems great. I hope it is scant. Thanks

@sewforthandsewon 2 ай бұрын

Thank you! You're the best! ❤🦋

@JanomeJAI 2 ай бұрын

You are so welcome!

@dwighthill58 5 жыл бұрын

Thanks Miriam, like your videos, please make tutorials on the quilt maker pro 18 longarm. I purchased mine in Arkansas when you were here Nov. 2017 and love it. There are so many things that it will do, but I probably have not discovered a lot of them. I certainly would like to know that I am not missing any really cool and helpful things it is capable of doing.

@JanomeJAI 5 жыл бұрын

We are so glad you are enjoying the videos. Visit our QMP 18 playlist to learn about the machine and it's many features: kzfaq.info/sun/PLkFx1RN-5WIE_bdnvgGCLR0K66Cp5rqo9 You may also find some techniques that we used on the QMP 16 helpful: kzfaq.info/sun/PLkFx1RN-5WIED4GMPDSMzbfQRYIKemTQU

@gailbuda1636 5 жыл бұрын

Keep

@gailbuda1636 5 жыл бұрын

Doing more videos, please.

@jeanniet1947 5 жыл бұрын

Ive been trying to get his foot for yonks! Where can i get it and how much, im in the uk

@john_andresen 8 ай бұрын

Is it possible to use the needle threader in HP mood?

@adelenepless3935 5 жыл бұрын

Will the HP feet and plate work with the 11000?

@cherylkaupp423 4 жыл бұрын

Does the HP/HP2 system work on the MC14000? Even the Janome site doesn't list it as compatible with the MC1400. Thanks!

@patfrontuto5342 5 жыл бұрын

I just ordered my Hp2 foot since I have been piecing with the plate and the foot that comes with the plate.

@arleneemrick2794 3 жыл бұрын

Can u use this hp plate on the Janome 6650 machine

@debbiebrandt5278 3 жыл бұрын

How do you set your stitch length for straight line quilting

@sherryseitz1889 5 жыл бұрын

Will the Hp Plate and foot work on the Skyline 7

@vickijeanne9958 3 жыл бұрын

I've heard to only use purple point needles for quilting! Do you recommend these as well? Thank you!

@PsychicKathleen 3 жыл бұрын

I just started using my HP2 foot but I cannot press the accufeed button my the cpu - it will only allow you to press this button IF you have one of the regular stitch plates attached. Do you have any suggestions? Also what I find is that there is a big space between the HP2 and the HP plate underneath - it doesn't "grab" the fabric right away. Do you have any suggestions about this too? Thanks!

@fransak2723 10 ай бұрын

I love your earrings!

@shellyspackman738 2 жыл бұрын

Will the HP plate & foot work with the MC 9900?

@brendatravis4361 3 жыл бұрын

I was wondering if you have any idea why I can't set my machine, the Horizon 9400, to stop in the 'needle up' position (which I learned how to do in another of your videos) when using my HP feet? I had it set, but when I changed to the HP foot and plate it cancelled that setting. I went to the 'Common Settings' and it is no longer an option.

@carolelliott9150 3 жыл бұрын

Does this work like the walking foot or replace it? I don’t like the walking foot because it is awkward and you can’t see what you’re doing. I need alternative

@debraewing2859 4 жыл бұрын

Is this just for 9 mm Janomes? Or for 7 mm Janomes too?

@carolwhittingham4693 5 ай бұрын

Hi trying to see jersey with twin needles but threads tangle please advise on Janome J3-24

@karlettamyers2133 2 жыл бұрын

I just bought this machine. I was using the the HP plate and foot. All of a sudden the foot came apart. The pin just fell out. Who do I contact to have it replaced?

@LMC-jk2yp 4 жыл бұрын

Is an HP needle plate and HP presser foot available for the Skyline S7?

@elisabethwink2298 5 жыл бұрын

What is the hole to the right of the hp foot for? It would be 1/8 away to the right of the needle on the foot

@carolynnecp 4 жыл бұрын

From memory, if you accidentally put it on without the right foot plate, the normal needle position takes it through that hole so it doesn't break the needle.

@claremcgill2490 3 жыл бұрын

Thanks for your video, can this foot and plate be used on the Atelier (Skyline) 6? Thanks, Clare.

@xanthanmum 2 жыл бұрын

I'd like to know the answer to this also. I can see it can be used with the Skyline S9 which is also 9mm.

@kathybarry2556 Жыл бұрын

The Skyline 6 is similar to my machine, the mc8200qcpse, which is not compatible with the HP plate, so probably not. I think the machines that can use it are the mc6700p, the horizon mc9450, the continental m7, and the latest one, the m17. There may be other models but I can’t think of them. Another machine that can also use it even though it’s not standard with it, is the mc6650, the one with the beautiful red panel on it. That machine will take it, you just have to buy it separately. I don’t think this is well known. I saw it on a Janome Canada video about this machine. Hope this helps

@xanthanmum Жыл бұрын

@@kathybarry2556 thanks for responding Kathy :) Happy sewing

@nurunnisafuad185 3 жыл бұрын

I have a straight stitch plate that comes with the S9 to be used when embroidering. Is this plate similar to the HP plate ? Can I use it together with the HP foot?

@JanomeJAI 3 жыл бұрын

No, the straight stitch needle plate cannot be used with the HP foot. That foot can ONLY be used with the HP plate.

@DebFlem Жыл бұрын

There is a software update you can do on the S9 to be able to use the HP plate and the HP feet. You can access the update on the Janome Global page.

@nurunnisafuad185 Жыл бұрын

@@DebFlem thank you 🙏

@terrymast3371 2 жыл бұрын

Are there other presser feet that fir the HP2 shank.? Especially one with a edge guide?

@JanomeJAI 2 жыл бұрын

Terry, we do not manufacture an edge guide foot with the HP2 shank at this time. There is a 1/4 guide foot available for the dual-feed AcuFeed system. Please see your local Janome dealer to try it out and purchase. Happy Sewing!

@kuldipkaurkalsi923 Жыл бұрын

😅very beautiful

@kbray78me 2 жыл бұрын

These video are wonderful I have the 9450 and sews beautiful till I try and use the HP plate and foot then it’s a hot mess..stitches are way to loose . I have re thread both top and Bobbi and nothing seems to help..and idea what I’m doing wrong I hope you see this comment..thank you

@Lgemmellca Жыл бұрын

Hi - I haven’t seen anyone else reply to your message, and I purposely read through the comments to see if anyone had the same issue I had. My solution to the loose tension issue is to manually increase the tension. I imagine there are lots of machines out there that weren’t “set” properly, with the tension set very low. Good luck!

@CindyWal 3 жыл бұрын

I am using my HP foot with pieces.cut by my Accuquilt Go Big. Because the dog ears are already cut off, I need an exact 1/4" seam. Do you have any tips for getting an exact 1/4" seam? Thank!!

@JanomeJAI 3 жыл бұрын

Yes! Please read this article written by our national spokesperson, Kimberly Einmo! www.kimberlyeinmo.com/the-elusive-scant-1-4-seam-defined-and-conquered

@sherryseitz1889 5 жыл бұрын

What glue do you use for glue basting? Thank you.

@Lynda5876 4 жыл бұрын

Hi Sherry, I just discovered glue basting. I love it for bindings. I use Elmer's SCHOOL glue (must be "school", not "glue all"). I pour it in a bottle with a fine tip. I bought the bottle here: smile.amazon.com/gp/product/B00EZSY5XQ/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

@robinkinley6851 3 жыл бұрын

I like the smaller glue pens like the ones used by Fons and Porter or Bohin. I do a lot of bindings and find I have more control with these...

@debladue4481 5 жыл бұрын

Will this fit an 8200QCP?

@kathybarry2556 2 жыл бұрын

Unfortunately not, the machine isn't compatible with it. I have the 8200 too.

@phyllisjeffrey6843 3 жыл бұрын

Does this foot fit janome horizon memory craft 8200QCP thank you

@kathybarry2556 2 жыл бұрын

No unfortunately, this machine isn't compatible with the HP plate or foot, I have this machine too, I love it but sometimes I wish I could use the HP plate...

@trishcraig723 Жыл бұрын

No idea if any of this works with my machine. Would love to know just what models it works with.

@JanomeJAI Жыл бұрын

Hello Trish - here's a link to our website that lists the machines that can use the HP foot at this time with one addition - the Continental M17! Happy Sewing - www.janome.com/accessories/sewing-machine-feet/hp-needle-plate-and-foot-set/

@JanomeJAI Жыл бұрын

In addition, here's more information about the HP plate: www.janome.com/accessories/sewing-machine-feet/hp-needle-plate2/

@lamarlatrell5045 2 жыл бұрын

I have the mc 6700p and the HD9 and now i realize that none of my hd9 feet can be used with this plate

@meldumas8868 3 жыл бұрын

Can this be used with the QCP8200 machine?

@kathybarry2556 2 жыл бұрын

Unfortunately it is not compatible. I have this machine too.

@incogniko636 Жыл бұрын

I have a janome skyline s7 ,can I use the hp foot with the plates I have, neither of them say hp on them , thanks Linda

@JanomeJAI Жыл бұрын

Linda, the Skyline S7 is not compatible with the HP Professional Grade Foot and Needleplate system. Your machine comes standard with the regular zig-zag needleplate, and the straight-stitch needleplate as an option.

@deborawoodyard296 3 жыл бұрын

Can the HP2 foot be used on a Janome MC6650? Thank you

@barbaraprice7811 Жыл бұрын

Can I use the HP foot and plate on my Janome MC 8900 QCP?

@JanomeJAI Жыл бұрын

Barbara, unfortunately the Memory Craft 8900 model does not have an HP foot or plate as an optional accessory.

@patriciawelden1456 Жыл бұрын

How can I use the HP foot and plate on my Janome Memory Craft 8200 QCP special edition ?

@JanomeJAI Жыл бұрын

Patricia, the HP foot and plate are not optional accessories for the 8900 QCP model.

@debbiemesser202 2 ай бұрын

I am a bit confused what is the "inside of the foot" ? so I line it up in the opening of the foot but against the edge ?

@JanomeJAI 2 ай бұрын

To clarify, line up the raw edge of the fabric with the precise right outside edge of the HP foot to achieve a scant 1/4" seam.

@gloriadalgleish1437 3 ай бұрын

It there a simlar foot that would work with my 8900 horizon qcp memory craft machine

@JanomeJAI 3 ай бұрын

It depends on what you're trying to do. If you want a narrow foot, consider the single AcuFeed VD foot.

@Louyou2 3 ай бұрын

Does it work with Jan o m e 6600p

@JanomeJAI 3 ай бұрын

We are sorry, but this set is not compatible with the MC6600P

@gloriadalgleish1437 2 жыл бұрын

Will the hp foot fit janome 8900 horizon QCP MACHINE

@kathybarry2556 2 жыл бұрын

It probably won't, I have the 8200 qcp which is very similar and the HP plate is not compatible with it

@gloriadalgleish1437 Жыл бұрын

@@kathybarry2556 thank you for the feed back Gloria Dalgleish

@juanitaacevedo4011 4 жыл бұрын

I am a little bit confused.. does the hp plate and foot do a straight quarter inch or a scant quarter inch???

@juliethompson1370 4 жыл бұрын

Juanita Acevedo scant

@Bandaid17 Жыл бұрын

What machine are you using? It links like a Skyline model. I am so disappointed that the HP foot was not available for my S 9. Will that be available soon?

@JanomeJAI Жыл бұрын

Vikki, there is an HP foot and plate available for the Skyline S9. Your dealer can contact us regarding availability if it is currently out of stock. They can contact our sales department who can give them a general eta to your part of the country. Happy Sewing!

@Bandaid17 Жыл бұрын

@@JanomeJAI I went to Pocono Sew and Vac in Stroudsburg PA where they tried the plate on their Skyline 9 to make sure and it did not fit so they declined to sell the foot and plate to me. Maybe you know something they don’t? I would love to have that combo for piecing.

@JanomeJAI Жыл бұрын

@@Bandaid17 Vikki the Skyline S9 does have the HP foot and Plate as an optional accessory. The plates vary depending on which model they are for - for example, the plate for the Continental M7 or 17 are different than the HP Needle Plates for the S9. We recommend making sure they have the proper plate for your machine, and apologize for any confusion.

@Bandaid17 Жыл бұрын

@@JanomeJAI Thank you. Will pursue with my dealer (they are really very good) I’m sure they will get it for me!!

@kristindevargas8374 4 жыл бұрын

I tried to purchase a set in Australia and was told the HP Plate does not work on the S7 machine. Something to to do with the S7 not recognising teh sensor on the HP plate. It's rather disappointing. It would be helpful if you could provide a list of what Janome machines it actually works with .

@VickysCottageCrafts 4 жыл бұрын

I have an S7 after some research I did buy the HP foot (not the accufeed foot one) And use it with my straight stitch plate that comes with the S7....this then allows you to only use the straight stitch setting....you do have to be cautious....I will find the link to the lady that posted it about the S7....I have been sewing this past week with it....and it’s beautiful! My stitches are amazing.

@VickysCottageCrafts 4 жыл бұрын

Kristin De Vargas kzfaq.info/get/bejne/hr5jfrhmq521hGg.html

@VickysCottageCrafts 4 жыл бұрын

Kristin De Vargas kzfaq.info/get/bejne/mNCmmtt-u5a6hJs.html

@diannaskillen845 3 жыл бұрын

If I don’t use a starter fabric my work gets sucked down - very frustrating sometimes. I have the horizon.

@RN-ij6fd 3 ай бұрын

Will it work for 8900

@JanomeJAI 3 ай бұрын

The HP Foot and Needleplate are not optional accessories for the MC8900. For more information on which accessories fit your machine, please see the machine's page on Janome.com at www.janome.com/machines/sewing/mc8900/. Happy Sewing!