Which is Faster, Well that Depends Stihl 661 or 500i?

Рет қаралды 69,369

4 ай бұрын

New Stihl MS661 vs My Favorite MS500i, Sawing up some big oak at the wood yard cleaning up and organizing. #stihl #smallbusiness #sidehustle
Our Website: www.outdoorswiththemorgans.com
Our FaceBook Page / outdoorswiththemorgans
Our Instagram outdoorswiththe...
Our Amazon Affiliate Store www.amazon.com/shop/influence...
Our Address: Outdoors with the Morgans
P.O. Box 2140
Cranberry Twp. Pa 16066
Partners and Sponsors
Kubota USA www.kubotausa.com
Wolfe Ridge Log Splitters www.wolferidgemfg.com
Stihl www.stihlusa.com
OUR EQUIPMENT LIST
Kubota KX-057-5 Excavator
Kubota SVL 97-2 Skid Loader
Kubota MX 5400 Utility Tractor
Kubota LX4020 Tractor
Wolfe Ridge Pro 28C Commercial Log Splitter
Woodmizer LT50 Sawmill
Split Force SF 11/16 Self Propelled Log Splitter
Split-Fire 4209 Log Splitter on Excavator
Kubota SideKick UTV
Polaris Sporstman 850 4 wheeler

Пікірлер: 254

@wolfpack4128 4 ай бұрын

I got the thank you letter you guys sent. I wasn't expecting that! You guys must spend so much time each week just responding to your viewers. I've been watching you guys for years and it is no wonder your audience keeps growing. You really do go the extra mile. Thanks again Mike, Melissa, Hunter and Daughter Eva for the thoughtful thank you card!

@Laughinghawg 4 ай бұрын

Mike, I'm not a tree guy, I'm not a wood guy, I'm not a firewood guy, I'm a Commercial Lending guy. The 2 in 1 sharpener changed my life! I've nicknamed mine the "Mr. Idiot-proof" because it can make most idiots look like a pro sharpening guy!

@lonniechartrand 4 ай бұрын

The 2 in 1 sharpener works so well because it also addresses the chain RAKERS which are over looked when hand filing. Rakers should be about .025 below the teeth.

@davidmorse8432 4 ай бұрын

@@lonniechartrand Thanks for the information Lonnie. I never knew what that specification was just arbitrarily dropped mine down. They have a gauge that you can place over the tooth to check it. Never used it though.

@eddiehenrard5251 4 ай бұрын

Mike, your sharpening test was objectively conclusive; hand sharpening isn’t really as effective as the combo’ tool. I rediscovered it too last year & use nothing else!

@SwimCoach8 4 ай бұрын

I know this was a video and sound quality can vary but the 661 sounded like it wasn't taching up as fast on the second (pine) cut. Almost like it wasn't quite warmed up. In the oak it was screaming. The pine sounded like it was stumbling, just a little. Finally, when you find a sharpening jig that works on your chain....Protect it with your life. My dad bought a jig, for his Echo, that some one recommended. It looked janky as crap, but it worked like magic. 30 years old and I'm still using it today. A couple over seas companies are copying it today, but it's no where near as nice as the older version. It has a file you crank as you slide it back and forth over the teeth. File looks like its carbide or diamond. Still cuts as good as it did 30 years ago????

@jimm874 4 ай бұрын

Yes, to me it sounded like it was running rich. Was a big difference when it was cutting the hardwood. I think should test them again in the softwood when the 661 gets over the flu, lol.

@Z-Bart 4 ай бұрын

Good morning. Winter's back here in NE Uzebeckasota. -10F. Birds are fed, stove is fed, life is good.

@dereksmith1803 4 ай бұрын

I have the big 330 gal IBC totes for sale for $35 each. The cages are all like new, but they had chemicals used to make vinyl siding, so I wouldn't reuse the tanks. I'm in the Kansas City area for anyone interested.

@PatriotUpNorth 4 ай бұрын

Outdoors with the Morgan’s and Arms family homestead are the 2 best content creators out there! Thanks Mike!

@beckyumphrey2626 4 ай бұрын

Arms has turned into a hunting channel.

@handlaidtrack 4 ай бұрын

Good morning from SE Wisco. Ran 661 a lot. I love using it, even on smaller wood. Simply a beast of a saw. Speed and power.

@williamrizzo1285 4 ай бұрын

Good morning Morgans and good people. A beautiful 79° in the Florida Keys this morning. Two more weeks, and we head North to the Villages. Lol .

@tommyordoyne7461 4 ай бұрын

Good morning from Upstate South Carolina. Comments to follow viewing. Have a productive day.

@05xlt 4 ай бұрын

I just acquired a 661 to compliment my 462. I purchased it with the 36” light bar for a big 4’ elm that needed to come down at a friends house. I’ve only got a couple hours on it, but man is it a beast! I first learned of that 2n1 sharpener on one of your videos, I e been using it ever since. 2-3 swipes per tooth and a chain is ready to go again. Saves time and really gets a lot of life out of a chain. I’m not sure what id do without it!

@ishure8849 4 ай бұрын

G'day Mike, I'd say you're spot on with your analogy, Ironhorse talks about the bore and stroke combination on the 066/661 variants and refers to them as tree eaters. I purchased my first unit in 1994 my second the following year and the 660 a few years ago, they advise a 25 inch bar for Oz conditions I have a 28 on mine and it's noticeably slower in big logs, I've been asking them to inject the 661 for a couple of years now they test their saws here so I keep asking the dealer fingers crossed 👍.

@matthewsims359 4 ай бұрын

The 2 n 1 is the only way i can sharpen a chain. I just cant seem to get any better with the file. I have tried and tried. The 2 n 1 is the ticket for me. Im glad you introduced it to me. Stay safe everybody

@richardbrowne1679 4 ай бұрын

Good Morning Morgan Family 🌞- Have a Wonderful and Blessed Day 🤠. I think your assessment of the 500i and 661 is correct. Great video 👍

@Jeff-zk6dk 4 ай бұрын

Love the sounds of stihl saws especially buzzing through a big oak I got 3 stihl's and they never disappoint keep the video's rolling and can't wait for some from west Virginia🇺🇸🇺🇸🇺🇸

@jasongallaher2501 4 ай бұрын

Hey Mike. I really enjoy your channel. I noticed a difference in the sound of the 661 from hardwood to soft. Sounds like it slightly fouled the plug or something. I replayed it twice, sounds like it not opening up on the Pine. Have a great day!

@appoutfeed 4 ай бұрын

Yup, that 2-in-1 sharpener is legit. Mike, you might consider throwing a Max Flo air filter on the 500i. I suspect that the 500i air filter is the achilles heel for that saw. I really like the filtration (plus the performance gain) of the Max Flo filter on mine. I also think it will be less expensive to run over the life of the saw. Cheers!

@luisrodriquez6358 4 ай бұрын

Good morning Mike, great comparison video of these two saws. I really like how detailed you are when comparing chainsaws. I not a wood guy by any means, but I have used chainsaws when I was young. I am a retired butcher/meatcutter, by spent 46 years in the industry with two years in the United States Army. I am a loyal follower of your channel here for ten years.

@2020Tundra 4 ай бұрын

Mike, I’ve got that same exact MS661 and you’re right; it’s a beast… and it’s heavy!! I recently decided to take off the 36” bar and purchased a Light 28” bar with a skip-tooth chain. Just that change made a noticeable weight difference along with better balance. Unfortunately, I have not tried out the new combination yet.

@BirdYoumans 4 ай бұрын

I'm a music man and even tho somewhat retired I still make music for my youtube channel. But my second love is wood. I think I like your channel because I get to experience cutting wood that I would never be able to get now at my age. It's always interesting when you get new equipment to see how technology advances over time. I do enjoy your channel!

@fricknjeep 4 ай бұрын

hi there have a old 66 nice old saw , nothing like a big block , i found most the time the dogs are in the log so the weight lessons , i also like the 2 in one sharper. best to all john

@user-bn3ti3lj9g 4 ай бұрын

I have several big Stihl saws & I just got tired of having to pull stat them & maintain them so now I use a GOPROW electric saw soooooo much easer & faster!

@davidmorse8432 4 ай бұрын

Hello! 😊 My "go-to" saw is the Stihl 462. It is super fast and easy to start. I use a dremel tool with a diamond bit to sharpen chains with excellent results.

@danbaker3525 4 ай бұрын

I use a dremel and the regular bits they sell at Lowe’s and for speed you can’t beat it gets my saws cutting great - if I don’t mind how fast I get it done I’ll go with hand file Buckin style haha getting the raker height correct is really the key

@davidmorse8432 4 ай бұрын

@@danbaker3525 Hi Dan, I started out with those regular stone type bits but they don't hold their shape and get smaller with use. I checked online and got some 7/32" bits that are diamond impregnated. They last a really long time, maintain their diameter and even do a better job. Check it out. You can lower the rakers with them too if needed.

@johnsadler8637 4 ай бұрын

Hey David!

@davidmorse8432 4 ай бұрын

@@johnsadler8637 Hi John!

@rickgianotti-jx3xo 4 ай бұрын

Mike, I have been using that Stihl chain sharpener tool for the last 2 years and it is one of the best tools invented. I have been cutting wood for 30 years. It is simple, fast & efficient. Love it.

@brucealvarez9263 4 ай бұрын

I have one of the Stihl sharpeners for my MS 180 and a different brand/size for my Echo Timberwolf. Yes they work great, especially for the person who doesn't need to sharpen often enough to get really good with a single file. Plus, no need to file the rakers separately.

@paulfrew6291 4 ай бұрын

Hi Mike and all I have a 661 had it for 6 years now love it

@shanehumphrey4827 4 ай бұрын

Holy crap. 363,000 subs !!! You are set for life !!!! No wonder Mellissa stays in now !!! Well gotta like that eh!!! Nice to see

@finpainter1 4 ай бұрын

Good morning. 661 sounds like a race car .

@dirtgreaseoutdoorpeace6637 4 ай бұрын

Nice Mike. Had to be something with the chain on the 661 in the pine. That thing is an animal in oak! Wow. We also love the Stihl jig. Just make sure you don’t push down , it will take the raker down too much. I try to push into the tooth. Thanks

@donaldhanger9807 4 ай бұрын

Thanks for your information on the big boy saws really enjoyed. Thanks for all your information very very informative.

@sandypidgeon4343 4 ай бұрын

All I use is the 2 in 1 file....takes the guess work out of raker height. Three swipes on each tooth on both sides - easy-peasey. GOD Bless

@jeffhennings6579 4 ай бұрын

Nice video I got to try the 500I few weeks ago wow I love it

@damoose1829 4 ай бұрын

I love the 661 for the bigger stuff. Sold one last summer w/36" bar. Was fun to set it up. It sounds like it has a Race cam in it when it Idles..

@lindnova 4 ай бұрын

I need to get me a 500i; I really like what you are showing with that saw. Have a 661 and it is great in big hardwood felling, bucking or milling, but heavy for normal work. I get a lot done with my 461 and 362 cutting firewood.

@lawrencelipon8673 4 ай бұрын

👍👍👍👍👍👌Very interesting and comparison videos were excellent side by side great camera work and editing very slick and made it easier to understand !!!

@brianhildom9372 4 ай бұрын

Hi Mike, good video as always. I have the 2 in 1 sharpener for all my saw chains, they are fool proof. It's mostly because of the rakers if you hand file and don't knock the rakers down it won't cut as well. That 661 is a beast I don't think the pine loads it enough, you can hear it four stroke. Just a old guys opinion!

@greglancaster1079 4 ай бұрын

I think the lightest one would win in my book being they are close to being fast. Also, looks like Levi has been very busy filling up the shed. You will need to resupply him so he can fill the last bin! Great job all!

@kearnsey64 4 ай бұрын

Excited to see the lumber from the saw logs!

@st7650 4 ай бұрын

Love the MS661C I have a 36 inch light bar on my saw thing is a wonderful saw I use it as my felling saw. The MS881 is just too heavy for a felling saw but I’m sure it would work great for a saw mill. Thanks for the post always love your Stihl reviews

@RockhillfarmYT 3 ай бұрын

I’ve done this comparison a couple times. I’ve done it on Bigwood and Smallwood. My 500. I does have a bark box but they come out the same for me. Mine was actually a 660 not a 661

@TheWoodsmanMilling 4 ай бұрын

I run a 661 with a 41" bar, full chisel full comp chain, barkbox muffler, 3 point felling dogs, and maxflow air filter. My latest tree was a 41" wide white oak that was leaning over a barn. I've been running that saw since 2019, and it has never let me down. I've also got an 881 with 47", 59", and 84" bars and chains. I still need to buy a roll of full chisel skip tooth .404 chain, but I do have a roll of granberg ripping chain for the .404 pitch bars/sprockets. Also, your thinking on the cut speed in hardwood vs softwood is correct.

@johns4584 4 ай бұрын

I have one of the 2 in 1 sharpeners too, and although it's a little awkward to get used to it does a nice job. I always have it when I cut along with a few other files, I still like the round file for quick in use touch ups though. If I can clamp the bar in my sharpening vise, the 2 in 1 is hard to beat for the semi skilled.

@impalaman4546 4 ай бұрын

Great video Mike thanks for sharing remember i always say if it not a still its not a deal

@frankzabotsky3237 4 ай бұрын

Mike thanks for showing that still 2n1 sharpener. Will check it out. Frank

@davidmonnin2792 4 ай бұрын

Would agree with your hypothesis on 500i vs 660 differences in hard and soft woods.

@bradleymcclintock7771 4 ай бұрын

Nice saw Mike good comparison.

@floydferguson5366 4 ай бұрын

Great video!

@pfzator 4 ай бұрын

Good afternoon Mike! Love any of your comparison videos! Not sure this has been mentioned yet, but what about a metal detector to locate the position of metal in the logs. I realize you wont need it mich, but its nerve racking guessing where the metal will be in the wood. Even an inexpensive detector will find an object 8inches deep. You're also spending time and/or money on the chain. Just my two cents for the day😊. Paul for CT

@runtimmytimer 4 ай бұрын

My 661 is getting ported as I type. The 661 will be faster in both types of wood after porting. It’s amazing what a good port job does to a power saw.

@1944chevytruck 4 ай бұрын

good job!...Hi Buckin!

@charlesperry1051 4 ай бұрын

Interesting saw comparison. I don't cut a ton of wood and will stick to my Stihl Farmboss (026) with 24 inch bar. It is about 20 years old but still starts and runs like a champ.

@redmonna 4 ай бұрын

Good morning Morgan family from Troy, OH! 🇺🇸

@briantownsend9148 4 ай бұрын

Hey your not to far from me lol I’m over around Greenville / Union city Ohio area

@russellbowman8051 4 ай бұрын

Both Are Very Nice Saws!! I Think I Would Settle With The 500 and Go For The Lighter Of The Two!! Keep Smiling On!! 😅👍👊❤️

@thomasnewcamp5563 4 ай бұрын

The girls in gods country got a LT70 yesterday

@beckyumphrey2626 4 ай бұрын

It is a demo.

@liljoeii6091 4 ай бұрын

AWESOME VIDEO THANK YOU FOR THE VIDEO

@jamesmoore768 4 ай бұрын

Have a Day Morgans! God Bless You all!😊🙏❤️

@realairplane261 4 ай бұрын

“Project Farm” does an excellent job of demonstrating a variety of saws.

@OUTDOORS55 4 ай бұрын

Lol sure. He does homeowner saws😂

@realairplane261 4 ай бұрын

So, what is so funny about that. No bias demonstrations that produce honest results.

@finnyasfinn0510 4 ай бұрын

Good Morning from Central blizzardy New York

@Duncangonefishin 4 ай бұрын

Top of the morning to y'all ! Have a great day, and hello from beautiful British Columbia.

@thomasstrout1738 4 ай бұрын

cold and very windy in NH this morning.

@bradleymcclintock7771 4 ай бұрын

We got about 4 Inches of snow where I live in Northern New Hampshire 😮

@johnviewer2305 4 ай бұрын

Like Buckin Billy said...with the 661...Stand up and buck...

@oldmanfred8676 4 ай бұрын

Love the smell of Red Oak in the Morning!😊

@davidmorse8432 4 ай бұрын

Hi Fred, Where have you been?

@oldmanfred8676 4 ай бұрын

@@davidmorse8432, Sick with a 7mm kidney stone and two urinary infections for five weeks David, No Bueno! I am recovering but still have some of the getting up in the night symptoms.

@brichm03 4 ай бұрын

Good morning from Michigan!

@oldmanfred8676 4 ай бұрын

Michigan boy here too!😊

@johnevans4015 4 ай бұрын

Now Mike you have the best saw the 66

@jasonpeterson9276 4 ай бұрын

I got 1 066 and 3 of 661's and got 2 of the 088's.. i love em all.. the 088 tho will kill your hearing unless ya use plugs and muffs..

@michaelhuffer9966 4 ай бұрын

Had a 660saw,went through wood like butter, fast saw. 😊😊

@fmeach7711 4 ай бұрын

Mike I expected some Dueling Chainsaw music? You are right that 661 is a beast. I couldn't lug it around for long but the 500i is a pretty sweet saw itself.

@wernerwittmann-hn7qv 4 ай бұрын

Hello Mike, I really enjoy your videos, I used to burn wood when I lived in Iowa for many winters but down here in Florida we don't need fire wood, maybe farther up north. Can you show in one of you videos how to use that chain sharpener. Thank You

@macdawg6403 4 ай бұрын

Nice Vid!

@chuckpreston4981 4 ай бұрын

The MS661 is a low revving saw, topping out at around 10,000 RPM while the 501I is a much higher revving saw topping out around 13,000. This information comes from Tim O'Bryant (Cotontop3 on KZfaq). He's been working with saws most of his life - both as a logger and now as a professional arborist. You are right in that the torque of the 661 will prevail in hardwood, while the higher chain speed of the 500I will chew through soft wood quicker.

@michaelmullins1290 4 ай бұрын

The best saw is the one that's running. Quote from Chris, from In the Woodyard.

@mitchjones2821 4 ай бұрын

When we got our company 500i we ran it with a 25” bar and standard full chisel chain vs my personal 660 with a 36” bar and “full skip” chain. We cut an ash log that was 24”. Both of us rockin the dogs trying to win. The 500i won by about 7-8 seconds. Obviously all because of the bar and chain set ups, but we were still very impressed. I wouldn’t of chosen that bar and chain set up on my 660 for that tree but it was already on it and prior to the race I only had to make a felling cut and one bucking cut. I had done the rest of the tree with my 201T from our lift. We raced them a few days later with matching bars and new chains and our results were similar in the ash as your results in the red oak.

@davidmorse8432 4 ай бұрын

What is the idea about a skip tooth chain. Fewer teeth means slower cutting but maybe it has to do with wood cuttings clogging up the kerf when the log is very large. What is your take on that?

@mitchjones2821 4 ай бұрын

@@davidmorse8432 longer bar so it’s less teeth cutting at a time means a faster cut. Think of how hard a normal bar (say 20”) and saw works to cut an 8” log, then put it in a 20” log. You flew through the 8” because you rpm’s and chain speed were higher with only 3 teeth cutting at a time. It also help you push the saw into you dogs which helps with fatigue. A normal long bar chain would stall the saw out.

@davidmorse8432 4 ай бұрын

@@mitchjones2821 Ok, I get it now. Thanks for the explanation. 👍

@SMITTY19722 4 ай бұрын

Morning outdoors fam👋👋

@user-bn3ti3lj9g 4 ай бұрын

16 to 20 inch bar is all I need!

@PaRoughandTumble 4 ай бұрын

All I use now to sharpen my saws is the Stihl 2 in 1 sharper. Hands down best sharper I've ever used.

@johnferguson7057 4 ай бұрын

In the redwood, I could hear you feathering the throttle in the 661.

@peteatthefarm4459 4 ай бұрын

Good Morning Mike from cold and windy ontario..... Pete 🇨🇦

@davidmorse8432 4 ай бұрын

Hi Pete, 57° F here this morning with light rain.

@badcat4707 4 ай бұрын

Good morning Pete 😸

@peteatthefarm4459 4 ай бұрын

@davidmorse8432 hey David, trade you, don't think we are getting past 32 today, might even snow a bit...

@peteatthefarm4459 4 ай бұрын

@@badcat4707morning BadCat... I would like the warm weather to return....

@stephendobie5013 4 ай бұрын

Good morning Pete...from cool and snowy Alberta....Steve

@default9740 4 ай бұрын

Love my 500i, running it here in New Zealand on green willow with a 25” bar. Run a Dewalt Flexvolt saw with an 18” bar beside it for limbing etc (saves my back in multiple ways). Interesting to see how the 661 compares: can’t say I would love that extra weight.

@dmorgan28 4 ай бұрын

That was a very interesting comparison. I’ve run those big saws and I just love Stihl chainsaws. I do love that 661 but that 500i is a nice saw!👍❤️

@toddpacheco4748 4 ай бұрын

Mike,it’s going to be go real quick with Levi helping you out with getting the slabs and boards off the woodmizer 😮😊❤

@jeffsimon3336 4 ай бұрын

Mike, consider taking that white oak that is split and quarter sawing it. It would be perfect for that. We have 1/4 sawn white oak floors we love them.

@davidbehnke4417 4 ай бұрын

That oak is hard on chains ..but great firewood…nothing better than a Sthil I nave a 1992 026 that still runs after all these years.

@erniecesana7496 4 ай бұрын

The 500i has a little whip at the end of bar being fuel injection and I consider that saw to be a little more dangerous for kick back.Back in my younger days I never felt that with the 088 magnum stihl.Jonsered 2095 turbo 6.8 cubic inch had a special feature while being pinched would accelerate.I haven't been using the Husqvarna 3120xp but have a 3/8s chain on it.I have some work for the 880 magnum but that has 404 and also use the 2188 jonsered

@peterwilliams2824 4 ай бұрын

I agree with the torque vs. hardwoods and speed vs. softwoods. What is run time on a chain between sharpening, without hitting metal?

@JBROWN3830 4 ай бұрын

Hey Mike, when are you gonna do more work at the cabin? I bet it’s beautiful up there already. Take care.

@LongBinh70 4 ай бұрын

There are SO many YT videos of "MS500i verses (fill in the blank)". Reminds me of the old Western movies where the young guns are always out to try their best against the gunslinger with the reputation. Many of those "tests" are so obviously fixed for the favorite to win: favorite gets worked hard leveraging against the dogs, Stihl cuts with just the weight of the saw. SEE, SEE! MY SAW IS BETTER! So sick of it. Good job staying objective, Matt. That said, although I really like my 500i (I should - I had it on order for over a year), after watching this video I need to dust off the 661C that only has two tanks of fuel through it to do the majority of my hardwood bucking. I had been ignoring it, mostly because of it's weight. I can't imagine how those loggers in the PNW hump those things up and down the steep hills all day!

@critical-thought 4 ай бұрын

Thanks for doing that comparison. Ot does indeed seem to be a choice between 3 lb vs a few seconds per cut. I’m not a production cutter, so I think I will take the 3 pounds. Click, $$$, buzzzz.

@d.m_7779 4 ай бұрын

Both Are Great saws but that fuel Injection is still Crazy lightweight and fast. So try a Max Flow Filter and bark box on the 500i vs Stock 661 to See a difference in hardwood Grettings ✌️

@johngrossbohlin7582 4 ай бұрын

It's not an either or scenario.... You need an assortment of saws to cope with varying conditions. I have MS170, MS261, MS461 and MS661 Stihl saws and they each have their place!

@bryanhighfield8856 4 ай бұрын

I have a Husqvarna 592xp, would be an interesting comparison to the 661 in both hard & soft wood.

@chadcollier250 4 ай бұрын

The 661 will shine in the bigger wood. If you were planning on running the 25” bar on the 661 you could put a 8 pin sprocket on it but you will most likely run the bigger bar anyway.

@glennmoore3764 4 ай бұрын

I agree with you

@mrtime1945 4 ай бұрын

Speed and everything is great. My question I how are they on fuel and bar chain oil consumption?😊

@PatrickCPalmer 4 ай бұрын

Another great video, thanks Mike. 👴🏻👍🏻

@sidbrowning9211 4 ай бұрын

I think the chain type, is different for a soft wood, verses hardwood! I worked at Carlton Chain Company for a few years and we has different tooth structure for different wood!

@TheKajunkat 4 ай бұрын

the Stihl 2 in 1 was a rebranded Pferd sharpener. It will save you a few bucks if you can put up with blue instead of orange.

@OUTDOORS55 4 ай бұрын

I think the 661 was running rich for some reason in the pine.

@henryoppermann134 4 ай бұрын

In listening to the tune for the 661 on the red pine it was running rich so not optimally running, since it is also new it needs a couple more tank full of gas run thru it…then compare it and let’s see if the 500 is still faster….she’s a beast but the weight really will wear you out on a full day of woodwork.

@williamkonecheck9239 4 ай бұрын

Years ago a still dealer told me hp per inch of chain or theoretically same power head a 16 in bar can cut a 32 in log with 2 cuts faster than a 32 in bar (1 cut) same power head) I dunno!