Which is the best Toroid?

Рет қаралды 1,378

Күн бұрын

The Poseidon Multiband Vertical from Coffee and Ham Radios is on sale now, link below. In this video I show why we chose the type of toroid we did for this antenna.
Apes video, • Compared: 4:1 UnUn's f...
Purchase here:, coffeeandhamradios.com
👉 ABR Industries: abrind.com/?sld=coffeeandhamr...
Use Code CoffeeHam for 10% off

Пікірлер: 18

@cornbread-KO5RN 4 ай бұрын

😂 glad to see someone out and doing something other than holding the desk down, CHUCK YOU DA MAN 👍

@KN4VA 4 ай бұрын

Thank you Chuck for the testing. I purchased one of the yesterday. I think I have all of the CaHR kits here or on order. I like kits, and I like kits I can use right away. Thank you for all the work you do and the rest of the group as well. 73, Michael - KN4VA

@KK6USYHamRadioAdventures 4 ай бұрын

Hey thanks Michael, I love testing but this one was a lot and I went out a second time to test the 43 toroid and it got dark pretty fast.

@billryland6199 3 ай бұрын

I make my own baluns and ununs using type 43 cores. They work great on the bands I operate - 80 through 15 meters HF. I use mostly 240 size toroids at 100 watts. Anything smaller can overheat. My SWRs are much lower than shown in these tests.

@KK6USYHamRadioAdventures 3 ай бұрын

I tried the 140 -43 and in this antenna they weren't as good overall. This is not a resonant antenna on other antennas we do use the 43 mix with good results.

@MATTHEWPRUESSING-wd7yl 4 ай бұрын

Awesome Really giving the 710 a workout

@MikeN2MAK 4 ай бұрын

I can't say it enough--I appreciate all the testing you have done on this and can't wait to try it out.

@temporarilyoffline 4 ай бұрын

The real world matters! The 43 would have been better for inventory, but making contacts is more important!

@WaynePatrick 14 күн бұрын

Great video Chuck. Seems you guys have this one dialed in. I am curious if it tunes on 30 meters? As CW / digital ops will use 30m too for POTA. Thanks for your dedication.

@AJ9FE 4 ай бұрын

atu goes brrrrrr

@KK6USYHamRadioAdventures 4 ай бұрын

A lot!

@swartzautoman2 4 ай бұрын

This is all way outside of my knowledge. Question: what is the clicking noise when tuning? What is the tuning doing?

@KK6USYHamRadioAdventures 4 ай бұрын

The relays in the radio for the tuner.

@dadlavinder Ай бұрын

The tuning is switching thousands of combinations of inductance and capacitance with hopes of matching the antenna to the desired 50 Ω load. Generally been my experience the longer the tuner has to work to find a match is indicating the antenna is really OFF match for the desired frequency. I agree out in a field setting what matters is “will it tune” but in a home setting with more permanent antenna installations if the tuner has to work that hard you need to better prune your antenna as you are loosing a lot of efficiency by expecting the tuner to do all the work. Always remember maximum energy transfer off the antenna wire is the end goal