THIS is what an informative video should be...good detailed information with no BS. Wonderful job!

We nave a suburban home and my son bought the Z345R. Nice mower with a 42in cut. I purchased the trailer hitch kit and the 10P trailer for the mower. Did not think the trailer would get much use but it has been handy to have around this spring. Your JD mower videos are the best.

I've already got a deposit on my new Z330R that should be arriving at my dealer around Thanksgiving. I was on the fence between John Deere and Toro but Toro is doing nothing new on the Timecutter whereas John Deere will now have a stronger frame (2.5" x 2" front, 1.5" x 2" sides), wider tires, Kawasaki engine, 1' axle EZT-DD hydro, dial control for deck height, LED lights (front & side), eliminated the parking brake lever (uses lap bar position like Toro to set brake) improved throttle control, hour meter, foot pedal deck lift, 20" cut & sewn seat w/ logo, accents & armrests, 250lb. tow hitch (without needing bumper kit), new floor pan design for access below, and optional available mulch control kit and a Power Flow Material Collection bagger for the 48A &54A 10ga. 3 blade deck, which is now painted green instead of yellow! Hope you get to show these to us before mine shows up at the dealer!

I got 355R coming today. Thanks for the help buddy.

The way I understand it from my John Deere dealer is you can only get a bagger system on the 42" deck not on the 48 or 54. In my area of the country a lot of people bag but it doesn't seem That common in other areas.

You do a great job on your videos, I wish y’all were closer to me!

Very good information found here. The 3 series r models sound like they'd be nice for a startup lawn care guy.

Man knows his product.

Thank you very much for the clear explanation. I just ordered a z365r based on your video.

One servicing note that bewilders me about my new X345R... The oil filter, in relation to the mower deck placement, is an engineering blunder. The little dinky (half-size) oil filter sits back a foot from the deck lip, which will certainly be a pain, and make a mess when it comes off. A larger gap between the filter and frame would have given us a better space to hand form a trough for any oil to follow.

Hi Brent I’ve been watching your vids for awhile now and I ended up buying a s130

Excellent video. Thanks for explaining in detail the E/M/R differences.

Good info. If you could do one for 2023 that’d be great.

I just ordered a Z345R . 4 weeks till delivery through my JD Dealer

This is overview of deck sizes and seats, would like more information about how far the blades can throw and engine power. Which better for hilly yards, or yards with lots of trees and roots, which better for 4-5 acres.

Great video Brent! Lots of great information! John Deere does give you options to choose from! Thanks for sharing! Have a great and awesome day!

I bought the Z335E and I love it perfect for the house

I've been watching your videos for awhile and find them informative but I have a question. Would it be beneficial to add to the videos information about what each series of mower is designed to cut in acreage? Perhaps it would be helpful before we even go into the dealer to already have an idea? Thanks!

Brent, am i able to upgrade me z335e seat from the one it comes with to the highback one with armrests your showing?

Can you do a video installing a bagger on a Z335E?

Great video. Thanks for the tips

Good video Brent!

Anyone you could get I looked for mine for a month a John Deere Z345M I wanted the R but the M was the only one I could find in the state of Washington,Picked it up last week It was a 6-hour trip to go get it I've already purchased the mulch control the kick pedal and z-glide for the front of it I will take it to my local dealer on Friday to make sure Home Depot put it together correctly because the tracking is way off and pick up a set of floor mats for it at the same time

What are the pros of more horsepower and displacement? Better cut quality and dispersion of clippings? Can cut through thicker, or wet grass?

I have a question. I have a John Deere z335e and I have to change the 4 front bushings. I see that they are made of plastic. My question is that it only has that and it does not have ball boxes.

I'm 6 foot 5 and chubby and the big struggle for me with zero turns is most of them the steering arms don't clear my legs. looks like to me these arms are already at the highest adjustment level. be nice to see more clearance in the lower trim levels for guys like me most mowers are very tight for big guys :(

I hope you made an error because I just bought a Z355E 48 in and the picture showed arm rests.

What about the z315e ?? I just bought it yesterday brand new

Would a Z365R be good for also pulling sweeper, roller, poly-cart, de-thatcher, and aerator attachments?

Do you have a recommendation about the mulching kit for these. I’m looking at getting a 355 or 365R. Seems people are having issues with the plastic kit. Is there a metal kit available like for older models??

Brent are you doing the "Mow an acre series" this year?

Question; the mulch control that's on the z365r. When you open the chute it looks like the two innermost blades are still isolated and mulching all the time and that only the outer blade is able to dispense grass? I ask this because sometimes I mow higher grass that has a hard time drying out from last nights dew or shower,but I also would like the convenience of closing the chute around cars,neighbors property, and occasionally flowerbeds and such. Would the mulch control suit my needs or would it just get block up trying to constantly mulch?

I have a question I just purchased a bigger home with a 1 acre lot thinking of buying a zero turn over a tractor. My question is I am about 6'2 340 lbs pounds I never seen a big guy operating a zero turn would I fit comfortable

Hello. I’m going to buy Z335E. How good is it? Is it worth it or better to buy Torro or Ariens? I have 1/4 acre yard with some obstacles but don’t want to use self propelled mover

The drain hole needs to be larger. It has a hard time keeping up with me while I mow.

Hi Brent I just ordered the z355r and is it a big difference between the regular engine and the ELS engine?

can you but an bagger on this mower or no

1"x1.5" steel frame? Why did JD do this? Looks skimpy compared to the models of other manufacturers at same or less price point.

hey brent its hunter

Half a oil change blaaaaaaa!

Never buy a zero turn mower with a stamped deck.