Which subwoofer output is best? Direct from Head Unit or DSP?

Рет қаралды 142,497

2 жыл бұрын

When we include a Digital Signal Processor in a car audio system that has an aftermarket head unit there can be some confusion on where it is best to get the subwoofer signal from for your subwoofer amplifiers. Do we use the connections on the head unit? Or on the DSP? Or both? How does signal routing through the DSP work and which subwoofer level controller should we use? On the DSP or on the subwoofer amplifier? Let's discuss!
Need a compact subwoofer amplifier with amazing sounding output? Check out the AudioControl ACM-1.300! Learn more here: www.audiocontrol.com/car-audio/power-amplifiers/acm-1300/
A special thanks to AudioControl for being a monthly channel sponsor!
🔊 Want more? Check out these links:
✅Car Audio Tutorial Library: bit.ly/CAFlearn
✅ FREE weekly training program: bit.ly/CAFlist
✅ Box Designs, BUILD YOUR OWN BOX!: bit.ly/CAFdesigns
✅Join the CAF Patreon Member Team: bit.ly/CAFpatreon
🔊🔊🔊 FULL VIDEO SERIES PLAYLISTS:🔊🔊🔊
- Ported Downfiring Subwoofer Build: bit.ly/CAFdownfire
- Dad's Sound Quality Daily Driver Build: bit.ly/CAFdadsSQ
- SEMA F150 Subwoofer Box Build: bit.ly/CAFf150
- LOUD Wrangler Build - bit.ly/CAFloudwrangler
- SQ Grand Cherokee Build - bit.ly/CAFgrandcherokee
- Stealth Hidden Bass SQ Build - bit.ly/CAFstealthaudio
Here at Car Audio Fabrication I teach you how to Master Car Audio in an effort to Design, Build, and Install your ideal car audio system. Whether you are a hardcore basshead or a HiFi focused audiophile I would love to have you subscribe and join our community!
--SUBSCRIBE--
kzfaq.info
--LET'S CONNECT!-
Website: www.caraudiofabrication.com/
Facebook: caraudiofabrication/
Instagram: @caraudiofab
Snapchat: @caraudiofab
Music:
Switch It Up - KZfaq Audio Library
Licensed under Creative Commons: By Attribution 3.0
Use of information from this video is at your own risk. You MUST view the full disclaimer here: www.caraudiofabrication.com/disclaimer
Car Audio Fabrication - Master Car Audio - Design, Build, Install

Пікірлер: 261

@2006gtobob 2 жыл бұрын

Life seemed so much simpler back in the early 90's for a basic install/swap! The flexibility of today's equipment is amazing! And...can be confusing, at first, for old farts like me!

@derekfreeman3562 Жыл бұрын

Just a bass and treble know was so simple

@markschultz1606 Жыл бұрын

HUA.

@jamescorfield534 9 ай бұрын

Yeah man I’d like a head unit that has clean signal. My kenwood Exlon is weird. There’s no simple signal to start from too many other option instead

@skippyboy88 7 ай бұрын

I remember when the zap board was cutting edge technology haha . Old school zapco amps and hifonic Orion and zeus

@andrescervantes5510 2 жыл бұрын

Dude Mark is such a beast.. literally anything I can think to ask he’ll answer it in any of his videos..

@SuburbanBBQ 2 жыл бұрын

Timely video ... I was just thinking about this last night while planning my system. Great info as always!

@denniswalker1640 2 жыл бұрын

Yeah all my amps I run in full range, and let my dsp do , all my tunes and crossover setting!!!

@Aftermathaudiott 2 жыл бұрын

How would you incorporate an epicenter within this exact set up?

@ATCDave1 2 жыл бұрын

Mark, another great video. Your explanation is clear and concise - well done!

@CarAudioFabrication 2 жыл бұрын

Glad you liked it! Thanks for watching and Happy Holidays!

@jiriza84641 10 ай бұрын

For me it's best to have the DSP do all the work. That is the best option IMO.

@SpinningwrencheswithJ 3 ай бұрын

Would you set the stereo unit to flat? And make all the adjustments in the DSP?

@jiriza84641 3 ай бұрын

@@SpinningwrencheswithJ yes, the stereo will not control anything the DSP is the overall control.

@SpinningwrencheswithJ 3 ай бұрын

@@jiriza84641 oh man…oh man…I’m a in my 40’s and I’m also a bass head but I’ve never messed with technology like this…a little overwhelming for sure brother.!!

@jiriza84641 3 ай бұрын

@@SpinningwrencheswithJ you'll still get the frequency from the rca's in and use the amp or DSP with the volume knob. Also, I hear you I like my sound as well, and bass when needed.

@jeremywartella9712 2 жыл бұрын

Got that DM810 on it'sway, can not wait to get it hooked up.

@ericshaw7859 6 ай бұрын

I agree that keeping fade ability on the stock deck is beneficial and worth running the extra set of rcas for. Great explaination of the ideal setup.

@KvnWlsn 2 жыл бұрын

I have a Kenwood Excelon DMX-706S that I run directly into my MiniDSP DSP and then to my amps. Before I had the DSP I would control all of the eq, phasing, time alignment and crossover settings from my head unit and it was cool but the DSP is way more powerful and adjustable plus it offers me the ability to make different presets so I can have a preset for sound quality and one for SPL. I can also add a preset for when someone else is driving and make it so that person cannot cause damage to my system even if they were to crank everything to max level because they are now being controlled by the DSP. The flexibility and features of a DSP cannot be matched!

@KvnWlsn Жыл бұрын

@kychristell1779heck no! But sometimes my mechanic may need to test drive it so I have a preset that actually disables my sub output and increases the high-pass to my mids and highs so that they are less likely to be damaged by someone turning the volume up too much.

@digginglow 2 жыл бұрын

This was a good video. this question is a big topic glad you made it.

@jeffh2125 Ай бұрын

That was very helpful. Thank you

@jordancouncil5583 Жыл бұрын

Thank you. For sharing your knowledge.

@marksalisbury1132 2 жыл бұрын

thank you for explaining that. i did not know what you just taught me.

@ganeshnarayan5505 2 жыл бұрын

Another great video Mark

@kswis 2 жыл бұрын

My dm-608 had a short but prior I channeled all 4 amps through the dsp. Def sounded A F-TON better. Now that it's just from the HU it stands out far more than when I first installed it a couple yrs ago

@odeanhuslin2858 2 жыл бұрын

Thanks for this info, question if I am using a dm 810 do I still need an epicenter for the subs and do I still have to use a preamp?

@MaXimus666789 2 жыл бұрын

I presume you could also then choose a "cheaper" headunit with less audio out options and let the DSP do the work if you were planning to have a DSP. Given headunit prices are sky high or out of stock.

@CarAudioFabrication 2 жыл бұрын

As long as the signal out of the head unit is clean and 20-20k then yes this could potentially allow you to pick something with less pre-outs as you can create what is needed via the DSP. Good observation!

@bsmbB 2 жыл бұрын

I would look for something high a quality playback. You cant usually upgrade the signal out typically it only gets "worse" from the signal source

@KvnWlsn 2 жыл бұрын

@MaXimus666789 I would still look for a head unit that is of high quality for the main purpose of having the cleanest signal possible. A DSP is a powerful tool that can do a lot but unless it comes with a line driver built in your signal is only going to be as good and as clean as what's coming from the head unit which is why I chose the Kenwood Excelon DMX-706S for my system. It has a clean and clear signal even at maximum volume with no distortion so as long as I set the gains on my amps correctly I never have to worry about blowing any speakers or even listening fatigue which can happen when listening to a "dirty" signal.

@thatguywiththeSV 2 жыл бұрын

I like sky high car audio

@ekimandersom4478 5 ай бұрын

Other than for radio, you don’t need a headunit at all, just buy a flac player or use the bluetooth directly in the dsp

@JesseMartinez-if2tw Жыл бұрын

Awesome video.. thnkyou

@sicklifedesigns 2 жыл бұрын

Awesome thanks ! 🔥

@PoppaTInstall Жыл бұрын

Since the DSP is feeding the signal to the amp would you still set the crossover on the amp or just set it to full pass? Active system.

@davidlunsford6155 2 жыл бұрын

So would you also want to use the output on the 4 channel amp? Or stay with the HU sub output?

@REVOanything 2 жыл бұрын

I use the Head unit to control the subwoofer volume. Still letting the DSP doing crossover and time alignments for the front rear and sub.

@joaoguimaraes31 Жыл бұрын

Really nice content! I usually dont run the back speakers from an amplifier, I have the impression it messes with the music stage of the system. Would you recomend PA them or just leave hooked to the main unit? I usually only drive with one passenger

@davidschmidt8367 2 жыл бұрын

Mark, when bought my current car I went to install a new HU and my amp and sub set up from the old car. This is when I found out about the factory amp for the mids. I used the regular output from the head unit to the factory amp. Should I have used the pre-out for the front and rear instead? I did eventually have to go into my sound settings and turn down the gain for the front and rear channels to improve the sound quality. If you need more info just ask. Thanks for vids!

@surround1969 2 жыл бұрын

Thank you mark for all your efforts.. I have a question: How can I implement and wire a center speaker 🔈 for my car which doesn’t has one , what type of speaker to use and how to wire it .. please I need details

@suprafan2jz 2 жыл бұрын

This has been on my mind a lot lately. Would you lose any signal "strength" by using only 2 rcs inputs? I've decided to bypass my factory HU. Tomorrow I'm installing a 2.1 volt USB dac out of my phone into a LC1i line driver and then to the DSP. I tried a SoundblasterX G6 dac/amp as a line driver and the very low sub frequencies were way stronger. Hoping this Dragonfly Red usb dac can do the same with less bulk.

@Oscar_Hdz 2 жыл бұрын

Quick question! For the “Output configuration” for a subwoofer would you select “Mono” or leave it as stereo output? I have the DM608 and have my subwoofer RCA’s going into channels 3/4 stereo of the input section and out of channels 5/6 stereo of the output section.

@richardr5888 2 жыл бұрын

I have the DM810. I use RCA line out 9 and 10 linked to the left and right on my mono sub amp. Is this OK, or should I just use just one of the mono lines from the DM810 with a "Y" adapter to the JL RD1500/1's left and right? Any pros or cons? Always wondered about that

@djinspector1 2 жыл бұрын

Hi Mark, can you make a video that shows the order of operation from the head unit to the dsp with multiple amps. I'm building a system from scratch and I want to go with 2 sets of highs, 2 sets of mids and 4 subs. Do I need the 10 channel dsp from audio control? That's what I'm looking at.

@evisorator123 2 жыл бұрын

Hey Mark, One thing I was wondering is when you make the front rca work as the “sub” preouts aswell what happens if you fade the signal to just the rear like in your example for the kids. Would that also cut off your subwoofer since the signal has now been turned down??

@LividLeon 2 жыл бұрын

Can you sum the front and rear channel input to increase voltage output or doing that would muddy the sound.

@kavindugilshan 2 жыл бұрын

Hello !! Do you know how manufacturers connected the center speaker in to the 4 channel amplifier ?? My car has a center speaker but original headunit has only 4 channels ??

@thefergchannel 2 жыл бұрын

I have the same setup but why didn’t you use channels 9+10 to output to the subwoofer amp? Instead you used the 7+8? Thanks for the explanation

@ZarieTudiskava 2 жыл бұрын

I really need to get a new head unit, any budget ones that I should take a look at? Need one that has outputs for mids and highs too, my current dinosaur Pioneer HU only has sub outputs

@druedemars9051 2 жыл бұрын

So noob question if you run all 3 sets trying to keep the fade option. Can you still run all your speakers to one amp from the dsp? And then your subs to another amp?

@gldmembr6132 2 жыл бұрын

When would you change the voltage output on the dsp from 5v to 10v ?

@themoneyshower502 Жыл бұрын

Would you rather use an external LOC to covert high speaker inputs or get an amp with built in function which accepts high level speaker inputs?

@realpowermotion6235 2 жыл бұрын

So im confused on the whole thing with component speakers and the wiring for those with the dsp do the tweeters and mids near separate rca lines and if so where would they go ?

@jurelwow 2 жыл бұрын

could yo do a setup on dodge and ram steering wheel controls , 2 wire, jack, restance and rams what? i have not gotten this to work yet in my 2019 ram promaster city i am useing a dmh-1500nex which does not show in settings, the steering wheel control settings. any help is awsome thank you! happy new years.

@ThaHammieJaassee 2 жыл бұрын

Sooo I have a question if you have a head unit with 2.5v pre outs and you hook it up to a sound processor will you get a better voltage signal going to the amps?

@troygodwin6915 2 жыл бұрын

Will I still need the audiocontrol matrix to boost the input signal if I'm using the audiocontrol dm-810 and if so will the matrix go in front of the dsp or behind it to the amplifiers?

@rakeshbalamkar3403 2 жыл бұрын

Hello sir I have a helix v8 dsp amplifier And head unit is oem Should i use hi lo converter to give input to dsp amp or just use hi level speaker signal input to dsp amplifier? Plz help me

@dutchiethaboss 2 жыл бұрын

I literally was thinking about this today. THANK YOU!! I appreciate you elaborating this topic especially for me. I’m always “experimenting” & end up having to either go back and fix something or replace something. So again, thanks a lot Mark 🙏🏾

@MyNameIssaSimon 2 жыл бұрын

Do headunits save the crossover settings when disconnecting the battery?

@indica_dogo868 7 ай бұрын

My son has an s10 with a pioneer head unit, an amplified 8" sub and a small amp with a dsp built in for the front and rear speakers. The head unit only has one set of outputs. We're wondering if it would be best to use the dsp app, the built in crossover settings on the sub or the head unit to tune the system? The rca's go from the head unit to the mids and highs amp then from the amp to the amplified sub.

@danr355 2 жыл бұрын

If my head unit is only 2 volts on the rca outputs for the front and rear speakers. Can a dsp increase that voltage. And what is a good voltage output for a sub rca?

@Harvz78 2 жыл бұрын

Hey Mark, where should I put the Epicenter after or before the DSP?????

@acemage1116 2 жыл бұрын

So if i get it right, if we are to use fade front/rear, and sub is connected to front. You would turn sub down along with front if you fade onto rear channel? So basically always connect sub to sub to sub when using a dsp and your hu got a sub output?

@jose-yz7le 2 жыл бұрын

Hey man so I got a pioneer as well is their any specific way way the channels in the back of the head unit are supposed to go cause it starts at FL FR RR RL would FL be 1st channel or FR ?

@loudspl1182 Жыл бұрын

have watched this over and over if u used all three f/r/s or just front and sub, would u not put the sub from radio to the mono input on dsp instead of stereo where u have them

@brandonhadden 2 жыл бұрын

Do you have a video showing your recommendation for a beginner set up for router router table and what bits to get first? If not could you do one please

@meverickjnphilip9885 2 жыл бұрын

Can I use a rca bass knob with the rca signal from dsp to amp

@wtfbenny 2 жыл бұрын

I have a question; what if I use the sub out of my 9887 direct to amplifier, effectively freeing up 2 channels on my dsp408 processor. Would I need to increase the TA/delay on the sub outputs coming directly from the HU to accommodate whatever latency in the DSP? Just a cheap way to get 10 active channels for me without going Helix or MiniDSP

@bsmbB 2 жыл бұрын

Through a d series amp/dsp (audiocontrol) and the epicenter is the best way👍🏼👍🏼

@brunom1280 2 жыл бұрын

I've set up the dsp and mids and highs are working but no output is coming from subwoofer. Any ideas?

@tcorley7477 2 жыл бұрын

So does a say audio control EQ do kind of the same thing but not digitally??

@youngJuss 2 жыл бұрын

My problem is from time to time when I have my hu up to the highest clean volume no clipping my dsp will either stop play sound until I turn off and back on or sometimes it will just make a loud screech sound until I turn it off

@SecretSquirrel8888 2 жыл бұрын

Awesome info and channel! So, using connection from the DSP to AMP, we make the frequency settings on DSP side, then do we do anything on Low Pass on the amp side? (I.e. leave it wide open or mirror the setting on DSP or doesn't matter?) Still need to set the gain?

@ryanjames2962 2 жыл бұрын

Technically it doesn’t matter… BUT, to be safe yes I personally would match the DSP, if you ever altered something on the DSP by mistake then it would be a backup so that the wrong signal wasn’t sent to the subwoofer. This is more of an issue with mids and highs, but the same principle would still stand

@ndiggadee2663 2 жыл бұрын

I've noticed now some of the Chinese aftermarket head units that are direct replacement have DSP software built into them have you had any experience with this new technology? Love your videos btw. Have had alpine F1 set up previous and alpines processor which required a laptop and RTA for the shop to set up

@Technotranceism 2 жыл бұрын

I like the audio control DSP, however I don't like having to rely on the computer software necessary for tuning. It would be nice if it had an app with Bluetooth for phone connection to make adjustments as well.

@darryndewar 2 жыл бұрын

Like with the AC-BT24 and the DM-RTA app?

@Technotranceism 2 жыл бұрын

@@darryndewar Ah I see said the blind man to the blind boy with the saw.

@CarAudioFabrication 2 жыл бұрын

The DM-RTA app is for the DM-RTA. But yes you could add a AC-BT24 and tune via a mobile device with the DM Smart DSP app

@jonclemons8463 2 жыл бұрын

Is there one for your phone?

@Technotranceism 2 жыл бұрын

@@jonclemons8463 apparently it can be adapted so

@ginoavila2085 Жыл бұрын

I love this video man but I have a question can I still use my epicenter? And how can it be conect

@alanshayler941 2 жыл бұрын

Question. I have a Honda 2021 that I cannot change the head unit on (yet) it has a factory 8 channel amp front mid high and centre, rear full range and sub with factory subwoofer in the boot can I use the high lvl wires to that sub to run into an aftermarket amp to get a better sub in the boot

@wadebuck69 2 жыл бұрын

What would be your advice if an audiocontrol epicenter was added into the mix? I currently have a pioneer avh-3500nex and run front and rear rca straight to audiocontrol dm-608 and sub rca to epicenter then to dm-608. The crossover settings for subwoofer on head unit are set as high as can go to feed epicenter as much signal range possible. So I end up with 3 control knobs one for sub amp, one for epicenter, and the dm-608 knob I have set to control my midrange from 400Hz-2800Hz. I run 3 amps a sub amp, a 4 channel for mid bass and midrange and another 4 channel for 2 sets of tweeters. The sub amp is NVX VAD2700.1, mid bass mid range amp CT Sounds CT150.4D, and tweeters powered by CT Sounds CT80.4D. In your opinion do I have the setup done right? If not any advice or suggestions are welcomed as this is my first build that is 100% done by me and I learned by sifting through youtube videos(a lot of CAF ones so thank you for that) and online forums so I realize that there is so much that I don't know but want to learn. Keep the outstanding videos coming and thank you

@DJShellingz 2 жыл бұрын

I would bridge mid and bass just to not feel like I'm leaving something out ...so basically id have all 3 bands going to the DSP instead of just the highs and mids, because I feel like im leaving something out

@ericfulmer2546 2 жыл бұрын

In my current situation W/ my Factory Bose system. I have 8 Speakers. I have 2 Front Tweeters, 2 front doors, 2 Back Door and 2 Rear Back. It looks like the 4 front are connected together and the Same with the Rears. So I only have 4 pairs coming out of the factory Amp. When connecting a DSP W/ Amplifiers like the AC D-5.1300 would you recommend leaving the Speakers connected the way they are, or would it be better to have them all separated?? Thanks

@antoniogaxiola4569 Жыл бұрын

Hi Mark. Is an excelent video. Thanks. But, how to connect a Epicenter using a DSP too?

@KingEdward317 Жыл бұрын

I would hook my amp to aux pre out on my head unit correct?

@Dee4657 9 ай бұрын

Hey man I love your vids but I really need help I don’t have audio control I have after market head unit and a prv dsp for a 5 channel to my doors and a nvx eq to sub amp and I’m getting high frequencies from my subs than I want. Adjusting my eq make everything get louder not jus my bass and I only have my sub woofer hooked to it! Any insights would greatly appreciated

@nbbasrutten3267 2 ай бұрын

Can I just use a single Digital Coaxial cable for full range signal to the DSP? Is the Coaxial cable better than toslink?

@lylegoodluck Жыл бұрын

I just ordered a epicenter micro. It asked for full range signal. Are aftermarket sub out puts full range until I turn on the sub crossover on the head unit? Or would I have to put a Y spliter on one of my rcas to get signal to my epicenter?

@niteryder414 2 жыл бұрын

Is buying a audiocontrol matrix worth the money if you have a head unit with 4v pre outs. And what do the audiocontrol matrix do for that price point. Please help.

@tootsy5238 2 жыл бұрын

Factory head unit sub out to mono amp? Or amplifier line outs into mono amplifier? ... don't have a DSP but have 2 options and I don't know what is best.

@kevincampo750 Жыл бұрын

Can I use a audiocontrol epicenter with this application if yes where is the best place to install

@fatality_don7813 Жыл бұрын

Hey bro can you show a video of how to tune the bass and mids trough an prv DSP please

@jrcampos1321 Жыл бұрын

Might be a dumb question but if I use a DSP I wouldn’t need a bass restorer? Can that just be done with a DSP or would I need both?

@TheBaz568 2 жыл бұрын

Love the video! I had a question, is it fine to configure time alignment and speaker levels on my headunit, and perhaps a little bit of eq too. While doing the bulk of the eq adjustment on the dsp. (My dsp does not support a remote to change presets) I drive with passengers in my vehicle half the time, and I love being able to quickly adjust the listening position (which sets the time alignment and speaker level based on the number of passengers) on my headunit without an app or a computer. I want to have the best possible listening experience in the drivers seat, but quickly change to a very good experience if passengers are in the vehicle. So I’m happy if the dsp is optimized for the drivers seat, and the headunit can be used for quick tuning.

@Bobcatspiritdude 2 жыл бұрын

That makes sense to me 💪😎👍

@CodeDisease 3 ай бұрын

what does it mean if my xav-ax3200 doesnt output anything through the subwoofer output, with it disabled and enabled (its not the amp)

@spike9194 2 жыл бұрын

Just out of curiosity what if you had like 4 sets of speakers front, 4 speakers back including 8" midrange, 6'5" component set in the doors then lets say like a small coaxial in like kickpanel or dash front and same type of a speaker behind the rear passenger area each side, plus a subwoofer in the trunk as in a lot of wires 2 amps front and rear how would you go about connecting those.

@mildaudiophile3879 2 жыл бұрын

They also make 6 channel rcas. I would use the sub out on the headunit. Yea it’s cool to use the dsp but definitely redundancy.

@Bkalldayy314 2 жыл бұрын

Came out just in time I’m planning on using my head unit jvc kw-z1000w to my ac d6.1200 to my sub amp sfb-1000d to power 2 jl10tw3-d4 subs

@charliesmith2432 2 жыл бұрын

Great video only wish best way of implementing a epic center in there BEST Way

@rdc7622 Жыл бұрын

Do most stereo company's/installers know how to do all this, including using the mic to tune a DSP system?

@lstephenson247 2 жыл бұрын

Trying decide on my next build what amps to use. JL XD or Audio Control?

@CarAudioFabrication 2 жыл бұрын

Both are super solid and work great!

@chris198004 Жыл бұрын

i find that depending on what music im listening to that sub settings are constantly having to be changed. volume and crossover point. is it just me? would removing that option from the deck cause this to be a problem for many?

@Jesse123xd 2 жыл бұрын

I have a pioneer 7600nex, should I get a DSP for my subs?

@MrKKUT1984 2 жыл бұрын

To be honest the last system I had I always changed my crossover settings on my subs depending on what type of music I was listening to. Buts that's just me, I listen to all kinds of music

@nrsktrading1286 10 ай бұрын

can you suggest a cheap and best DSP for my FIAT Punto EVO sports diesel, India? Pl if you can.

@zeus.edwards2662 2 жыл бұрын

i like to run 3 RCA's front, rear n sub to the processor, keep the setting on the deck flat and tune the DSP, that way when i want to adjust a song like it needs a little more of something or less i can use the setting on the deck cause at the end of the day we all listen to different genres of music and not all music is recorded correctly. so the deck/head unit is to make minor adjustments, that way when the DSP is set you always have the flexibility to still tweak from the head unit individually. Its the same like using a Preamp, example a head unit that have front rear and sub , you got 2 amps one for mids and highs and one for sub , then using 2 preamps makes more sense, front output from head unit to one preamp and sub output from head unit to next preamp, now you have setting for mids and higs alone and with the sub you can adjust for bass alone and as it runs through from the front and read signal the settings for front on the deck is added adjustments to make as with the sub setting on the head unit , maximizing everything, and this can be done in many ways as long as you know what front-rear or sub will be powering, With the processor its easier as long as you got everything dial in and less equipment, with more than one preamp you can always adjust on the fly.

@curtisstratton8390 2 жыл бұрын

First of all, I'm very sorry that certain people make fun of you, in my opinion they are jealous. Lol, I really appreciate your explanation of everything you do, I can tell you really care about your work. I really like audio as well and at first I thought I just wanted it as loud as possible but I soon realized it is a proper balance of high, mid and low frequency.

@CarAudioFabrication 2 жыл бұрын

Happy to have you here! Here on this channel we are all about building people up and helping them on their path. No one is perfect, I'm certainly not and I still have tons more to learn. Learning every day!

@curtisstratton8390 2 жыл бұрын

Sorry this is supposed to be included in first post, due to unannounced guests lol. Anyway, I'm happy that you really want to be the best at anything you do. In my opinion I believe you would make a wonderful teacher. Thanks for being yourself. Thanks Curtis Stratton

@curtisstratton8390 2 жыл бұрын

@@CarAudioFabrication I didn't see this till now and I agree no one is perfect but we can strive to be better and you my friend definitely have that positive energy about yourself. I've noticed that " a lot of professional people are quick to call others people out of name". I definitely appreciate you as a professional. Sincerely Curtis Stratton.

@david029014 6 ай бұрын

is the audio control dm 610 and dm 810 still good in 2024? or is there something better???

@tomasexteriors 2 жыл бұрын

Epicenter... 💎 One way

@MFDANIEL2 2 жыл бұрын

I don't why but I had all 3 outputs, left and right from behind the headunit going to the every imput channels on my DM608. Then on my output I had all three input sources enabled and highlighted in blue on every output channel.

@dennislinner7074 2 жыл бұрын

Would this bypass the H/U set up also work with an Audison AP8.9 & AP1D system? I'm about to order my system and Audison is the route I'm going. I haven't installed a system like this since my teenage years... about 30 years now :( If I bypass the head unit sub-out go directly into the AP8.9 bit (which is where I plan on connecting the DRC), would the software that Audison provides to control the DSP allow me to split the input frequencies to share with the sub out from the DSP amp to the mono block?

@plebegamer824 2 жыл бұрын

Can i connect a epicenter to the dsp?

@codyparnell 2 жыл бұрын

where would you hook up an epicenter in this chain?

@sbeezynukka 2 жыл бұрын

I just use dual controllers, the DRC-205 and my subs amp controller gives me granular control

@rishisonoo7997 2 жыл бұрын

Very informative video. I have a Pioneer DEX-P99rs as the head unit in my system. Do I still need a DSP. What can a DSP do for me?

@beardedforlife3740 2 жыл бұрын

Depends on how good you want it to sound. A DSP will allow you to tune each speaker individually meaning you can set crossover points, do time alignment, and equalizer settings on each speaker separately. Not to mention you can choose what type of filter to use and the slope of that filter for each speaker. As far as I know there isn't a head unit out that will allow for individual control of each speaker. With that being said you don't have to use a DSP if you like the sound you already have using the settings on your head unit

@eddietelles6039 2 жыл бұрын

Have you ever used the audiocontrol dqdx signal processor and epicenter together and would you install in your system ?

@tomasexteriors 2 жыл бұрын

Good question@eddie Telles

@CarAudioFabrication 2 жыл бұрын

Good question for a future video!

@62dobie 2 жыл бұрын

@@CarAudioFabrication, did you ever do this video suggestion? I have a installation coming soon. I was thinking about adding the epicenter.

@62dobie 2 жыл бұрын

@@CarAudioFabrication, My build is very similar. Pioneer DMH-W4660NEX head unit with Sirius HD kit, Metra Dash Kit 95-7628bhg and Maestro ADS-MRR for steering wheel/front & backup camera controls, Custom SlamPanda Raider Nation Bass Knob w/led's, Panda Cub for four DS18 Bullet Tweeters on a JP48 amp, four D4S Pro Audio 6.5 v2’s mids on a JP234, 2 Nightshades v5’s 12in's on a SALT 8, 5.5 qubic feet box by Gately Audio tuned to 32hz, 80ah of Lithium by Underground Power, XS Super Cap under the hood, Dual Volt Meter in dash for Lithium and alternator, 250amp high power Alternator by Power bastards, Big 4 install, SoundSkin Pro Plus Sound Deadening, doors, headliner, floor and hatch,, SMD Copper Fused Distribution Blocks, OFC RCA’s from KnuKonceptz, OFC 4 gauge Sky High Speaker Wire, a whole lot of OFC 0 gauge Sky High Wiring and colored heat shrink wrap. System Tuning will be at -8db. This is my set up going in June 1. I'd like to add an Epicenter. Is it necessary?