The MicroGard appears to be a much better buy than the PPE. As a side note, having worked as a Customs officer, all imported merchandise is required by law to be marked with the country of origin. If a Customs inspector had uncovered this shipment during an inspection, he would have blocked its entry into the country until each individual filter was marked with a country of origin label.
@WhipCityWrencher9 ай бұрын
Thanks, I didnt know that👍
@RicArmstrong9 ай бұрын
Ive been using the Microgard Select for a couple years now and its a fantastic filter. Probably my favorite one now.
@hosepipe8 ай бұрын
I emailed PPE asking where their filters are made. This is what they emailed back. "That is a complicated question, since the materials are source and made in different country varying on the filter, They are made overseas but most of the media is from Europe while most of the body of the filters are made in Asia"
@WhipCityWrencher8 ай бұрын
Thanks, probably Chinese made then.
@gunjunky1877 ай бұрын
I like MicroGard Select filters. They are the only filter I plan on using.
@jeffkortsch82769 ай бұрын
The PPE filter has one unique feature - the internal magnet. Other than that, it isn't worth $19 more than the MicroGard. It is good to see coil springs (my preference) on both filters. Of the two, I'd take the MicroGard.
@WhipCityWrencher9 ай бұрын
Thanks, Jeff👍
@TonicofSonic9 ай бұрын
The magnet is perfect for forming little bundles of joy for clogging things up.
@danbrenneman12409 ай бұрын
Hi Pete! Great video as always. An interesting note is the fact that all the silicone gasketed filters seem to come from Vietnam 🤔 We received a shipment of NAPA golds the other day at work...Only one box made in Vietnam and they all had silicone gaskets with no mention on the packaging. The made in Mexicos all had nitrile rubber. Just an interesting finding I wanted to share.
@WhipCityWrencher9 ай бұрын
Hi Dan, I've noticed that too about the gaskets, Thanks for Sharing👍
@johnm64559 ай бұрын
Thanks, Whip! Looks like maybe PPE needed the extra $20 to pay their marketing dept. Neat and tidy construction, which is nice to see in this day and age, but they’re asking Ferrari prices for a Honda Accord.
@WhipCityWrencher9 ай бұрын
You're Welcome John👍
@sudsycloud65309 ай бұрын
The PPE isn't bad, but that price is killer. I've exclusively switched to Microgard Select after seeing the trash we've been getting from anything owned by Mann-Hummel or Champ. Between your vids and my own analysis they are very well built and very consistent. They tick all of the boxes except the base-end bypass. I've even gone as far as finding filter numbers close to what fits on my quad, diesel tractor, Generac, and zero-turn after seeing what the Wix filters for them look like inside. Thanks for the vid.
@WhipCityWrencher9 ай бұрын
You're Welcome! Thanks👍
@vincentrobinette15079 ай бұрын
MicroGard for the win...My primary criteria is the filter media, and I'm surprised how close the media area was between the two filters. Better media + lower price = win for MicroGard!
@faxmen099 ай бұрын
You're spot on Whip about the PPE 10um statement. Without a % meaningless. The throw away magnet in the dome, kinda gimmicky. And no coo, though a guess says China. Decently made filter but not for $30. O'R MSL a much better value and the clear choice between the two. But I'm with you on looking for a made in USA filter first. Fram Endurance or Purolator Boss, Napa Platinum, even a Purolator P1 ok too imo. Thanks for video.
@WhipCityWrencher9 ай бұрын
You're Welcome faxmen09, Thanks👍
@johng.49599 ай бұрын
I really like the Microgard filters. Switched over from Wix/Napa filters. Excellent construction. Very well made filters.
@WhipCityWrencher9 ай бұрын
► Find the cheapest gas in your area. www.gasbuddy.com/home ► Thanks For Watching and Please hit the 👍 button! I try and make an oil filter inspection video every Friday on this KZfaq channel, Thank You!
@frankc11749 ай бұрын
Them microguard filters are very nice.
@kensimpson81339 ай бұрын
Both look like they would be great filters, but for the money, it is hard to beat the MicroGard.
@timkis649 ай бұрын
on filter brands with the bypass on the end opposite the opening, i usually put a "donut magnet on the end to catch any metal that may be washed off the media during bypass.believe it or not, there is a visual amount of magnetic powder attached to the magnet that wouldve went thru engine on bypass, such as cold starts.even at 3500 intervals.you can learn alot from a cut open used filter.
@PapiDoesIt9 ай бұрын
Either one of those would be welcome under my hood. I've noticed a lot of Vietnam filters have silicon gaskets.
@user-fw6xr3ue2q9 ай бұрын
At least the box says fuel filter 😂
@WhipCityWrencher9 ай бұрын
Yep, I don't know what that's all about. LOL😊
@scottymoondogjakubin47669 ай бұрын
I like the microgaurd filter way better ! The PPE is just more like a $10 filter with a $20 magnet ! LOL ! 😛
@MarkSmith-cz3by6 ай бұрын
In all fairness, a high temperature rated magnet that can withstand up to 300° without losing its magnetism is very expensive
@raykirchdorfer54529 ай бұрын
Like the fact that the ppe filter has a magnet
@daewooparts9 ай бұрын
🦃Could have used one of those filters to filter all the disgusting oil in the turkey gravy yesterday at my brothers wife's Thanksgiving dinner, it reminded me of used motor oil at the bottom of the pan before they made gravy with it .🍗....😁
@WhipCityWrencher9 ай бұрын
😮LOL
@andrewanderson14369 ай бұрын
Microguard for the win. Have you cut open any of the STP filters yet. Maybe I just haven't found those videos yet. Anyway hope you had a great turkey day.
@WhipCityWrencher9 ай бұрын
Thanks! Yes, I had a great Turkey Day. Here are a couple links to some STP oil filters I opened. kzfaq.info/get/bejne/hdllh6-bm8yyhqc.html&ab_channel=WhipCityWrencher kzfaq.info/get/bejne/m5qfid130bS8aYU.html&ab_channel=WhipCityWrencher
@kimmillard94453 ай бұрын
Things I like about both filters. The silicone O-Ring might be the tie-breaker for me in favor of the MicroGard Select. Don't see that every day, even on the top-of-the-line filters.
@softwaresignals9 ай бұрын
On the subject of just putting a neodymium cheap magnet on the outside (1 to 3 small ones) of an oil filter, it's not a bad idea. Dome end is probably better since flow is much slower there. Harbor Freight will sell you 6 for $3, so cheap. ... or Amazon, Hobby Lobby, they seem easy to get.
@WhipCityWrencher9 ай бұрын
👍
@TonicofSonic9 ай бұрын
Without proper testing you are more likely to bundle all the metal together so they can come loose together and raise hell.
@softwaresignals9 ай бұрын
@@TonicofSonic Magnets are on the dirty side of the oil filter anyway. Oil filter will catch any bigger chunks over 25 microns in size if the external magnet dropped off, which it probably won't. Strong neodymium magnets stay put.
@MarkSmith-cz3by6 ай бұрын
You can’t just use any neodynium magnet because the normal oil temperatures will cause a cheap neodymium magnet to lose its magnetism and release all the particles back to the oil so you must use a high temperature 300° plus rated magnet, and those are expensive
@softwaresignals6 ай бұрын
@@MarkSmith-cz3by The magnet's coercivity is not so bad when it's attached to iron (filter housing, outside). Most losses in physics experiments are for a magnet in free air. .... And the temperature doesn't get too high with all that air and metal conductivity around it either. You'd be OK with the cheapie neodymiums here, but, you're right, temperature can matter! Test: If they fall off, or simply don't stick to the outside of the oil filter anymore with good force, then that is a sign they have taken too many hot trips. I'll check to see if the one small disc neodymium I have on the dome end of the oil filter is still "got it goin' on" with force. Good points. Can't know til we try it out, and the results will be obvious. (People have reported they stay on and don't get weak, as far as I've heard.)
@bradbyers75058 ай бұрын
Good job, Whip. Sometimes I wish I could design my own custom filter, but for now the MicroGard gets my vote. The magnet is a nice feature though. Thanks again for the thorough autopsy.
@WhipCityWrencher8 ай бұрын
You're Welcome Brad👍
@AJmx27020019 ай бұрын
Not a huge fan of the PPE but it is a nice filter and if i was going to spend that i would opt for a Donaldson or Cat Filter . It drives me nuts on these diesel forums with the Amsoil and PPE filters that have a cult like following. And it seems like PPE goes out of their way to hide who makes their filters . I am really glad to see you shared this since its whats on the inside as to what makes it work
@WhipCityWrencher9 ай бұрын
Thanks, AJ👍
@raykirchdorfer54529 ай бұрын
I think all filters should have magnet
@anish-799 ай бұрын
Bigger doesn't Generally mean better. MicroGard better built inside and filter media is almost same. Compare it to OEM AC DELCO oil filter to see which one is better.
@ellalamont69438 ай бұрын
YaY to John! Another great comparison! Have a Great Week! 👍😊
@WhipCityWrencher8 ай бұрын
Thanks, Ella Have a great week also👍😊
@ellalamont69438 ай бұрын
@@WhipCityWrencher Thanks! 😊
@dcm1f39 ай бұрын
I'll still with Fram and Purolator. I bet they filter 10 microns better than that PPE filter also.
@Johncourt4099 ай бұрын
If I’m not mistaken both of these filters are made in Vietnam. The Microguard is the same as the STP extended life at AutoZone and also the Premium guard extended life filters. They are great filters as I’ve used the Premium guard on my car and they have always held up very well. I’d be willing to bet it’s the same media in both filters.
@dwendt449 ай бұрын
The magnet, any magnet, would magnetize the whole filter canister. Not a problem just something to know.
@SimpleTastyFood20249 ай бұрын
Good job Pete, another great review! Hope you had a nice Thanksgiving also. God bless 🙂. Merri :)
@WhipCityWrencher9 ай бұрын
Thanks, Merri Thanksgiving was great, Thanks! Have a great Weeekend👍
@boskiles23699 ай бұрын
Another good one 👍 full watch
@WhipCityWrencher9 ай бұрын
Thanks, Bo👍
@BW-kv9wj9 ай бұрын
Just remember, always choose a filter that has a synthetic media that looks like a thick white soft cotton material. Don’t buy the synthetic blends that are pink or Orange and look like paper. I prefer the Napa Platinum.
@jonathannance50869 ай бұрын
Thanks, Pete, for another informative video and John for the donation. I am going to go with the MicroGard for the win. The lack of filtering efficiency ratings and the high price for a simple magnet by PPE is not worth it. Lack of transparency and a non synthetic filter media for $30 bucks, pass.
@WhipCityWrencher9 ай бұрын
You're Welcome Jonathan👍 Thanks!
@markwarnberg95049 ай бұрын
10 microns!!! Oil will be going through the by-pass....and at $30!!!!!!
@kbeg1329 ай бұрын
The Microfarad filter looks like a well made filter that is readily available at a good price. Awesome video as always! I hope you had a nice Thanksgiving
@WhipCityWrencher9 ай бұрын
Hi Kevin Hope you had a nice Thanksgiving as well, Thanks👍
@memopadilla59319 ай бұрын
@@WhipCityWrencher Happy Thanksgiving Whipper.. Also I was wondering if you could save that Microgard/Premium Guard adbv AND outer gasket and burn them both to see if they are really silicone.. Some people think they are lying and using red nitrile.
@WhipCityWrencher9 ай бұрын
@@memopadilla5931 Happy Thanksgiving! I'll try and make a video of that test soon, Thanks!👍
@doublej97179 ай бұрын
@@memopadilla5931great suggestion, they do have a much brighter color than most brands!
@memopadilla59319 ай бұрын
@@WhipCityWrencher Thank you Whip.. I really appreciate that !
@TargaWheels9 ай бұрын
Happy Thanksgiving!!👍
@WhipCityWrencher9 ай бұрын
Happy Thanksgiving👍
@ronaldlaw53269 ай бұрын
Great job 👍
@WhipCityWrencher9 ай бұрын
Thanks, Ronald👍
@frankmercer70099 ай бұрын
This is a case of "You don't get what you pay for." Looks like the PPP is not worth the extra cost.
@joesolo99469 ай бұрын
Definitely if you're down on your luck, the microgard would last a vehicle 20,000 miles. Microgard seems to check all the boxes. Me, I going to stick to my Super Tech ST filters.. Appreciate all your videos, thanks!!
@WhipCityWrencher9 ай бұрын
You're Welcome Joe👍 Thanks!
@ginog50378 ай бұрын
Great video, spending more doesn't always pay off. I'm curious to know with the 10 micron, what's the bypass spring/pressure. Will it be running on its bypass mostly? Merry Christmas to you and your family...
@WhipCityWrencher8 ай бұрын
Sorry, I don't know the bypass valve setting. Not published. Merry Christmas🎄
@YukonHawk18 ай бұрын
Great video.
@WhipCityWrencher8 ай бұрын
Thanks, Paul👍
@dwendt449 ай бұрын
Most all Asian made filters have toe plastic covering on the business end.
@drumtwo4seven9 ай бұрын
YOU'RE RIGHT PPE OVERPRICED ID GO WITH MADE IN THE USA 🇺🇲 INTERESTING REVIEW, AS ALWAYS 👍
@STREETFIGHTER506 ай бұрын
Can almost buy 3 MicroGard Selects for 1 of those. Hahaha it’s an easy decision for me!😂
@cskiles3189 ай бұрын
Happy Black Friday friend. Watching now 👍
@WhipCityWrencher9 ай бұрын
Thanks, Christina👍
@frederickbooth79709 ай бұрын
Did all my shopping before Black Friday! Less crowds & traffic. The stores I go to gave me a good $$ anyway.
@user-fw6xr3ue2q9 ай бұрын
Ones a fuel filter
@WhipCityWrencher9 ай бұрын
It says so on the box but it's not. LOL
@MrTakeone519 ай бұрын
Just my opinion but I like the micro guard
@PurpleDreki9 ай бұрын
Good morning, sir! I had a decent Thanksgiving!
@WhipCityWrencher9 ай бұрын
Good Morning, Thanks👍
@mimelio9 ай бұрын
WOW That PPE is way way over priced !!
@s60t5M9 ай бұрын
The PPE also a fuel filter? I noticed the box says fuel filter on one side
@WhipCityWrencher9 ай бұрын
I don't know why it says that, this is an oil filter. LOL😊
@user-qb3vi5kk3t10 күн бұрын
If not the microgard select filter then the fram endurance filter is the way to go
@jamescaron64659 ай бұрын
The PPE looks like a nice filter but really, $30? The microguard looks like it's equal in every way except in volume and that magnet, which I think is a gimmick. I mean really, if my engine is throwing metal shards, I got bigger problems. Further, many engines have aluminum in them so a magnet is not going to do much. And the media and gasket are nicer on the microguard. Never had much experience of the microguard but they look pretty good! Hope you had a nice thanksgiving, too Pete!!
@WhipCityWrencher9 ай бұрын
Thanks, Jim I had a great Thanksgiving😊
@freedomliberty76119 ай бұрын
Great job Pete
@WhipCityWrencher9 ай бұрын
Thanks Dwayne👍
@sirmister44119 ай бұрын
Micro guard for the win. Pepe for the most over priced unknown no info filter
@frederickbooth79709 ай бұрын
The PPE filter looks to us to have a 10 for the month. Would never use a filter that does not say where it was made!
@playstation2bigs9 ай бұрын
Would you recommend Amsoil OE oil for Toyota dual vvti ?
@jamescaron64659 ай бұрын
I've used them in the past, They are a nice filter but not worth the money. I use Purolater PureOnes on my wife's matrix with the VVT now. Nicer and less money.
@playstation2bigs9 ай бұрын
@@jamescaron6465 amsoil oil okay to use? Or way overpriced and overrated?
@WhipCityWrencher9 ай бұрын
Oil or Filter? I've never used Amsoil oil, but I do like Pennzoil Platinum oil, my engine seems to run quieter with that oil.
@jamescaron64659 ай бұрын
@@WhipCityWrencher I do use the Oil Pete, it's a great oil, so is Pennzoil. In fact Project farm did a head to head of about 10 oils and rated them 1 and 2 overall. The Amsoil filters are way overpriced for what you get.
@WhipCityWrencher9 ай бұрын
@@jamescaron6465 I saw those Project Farm videos, good stuff! Yep, the Amsoil oil filter is basically the same as the Fram Endurance oil filters, both Champ Made.😊😊
@timkis649 ай бұрын
i guess legally they can put 10 microns on the package, even if its 1% efficeint.kind of lile a synthetic blend oil, what 3% synthetic? for 4 extra dollars a quart?
@WhipCityWrencher9 ай бұрын
Yep, Exactly
@user-sf7kl9uh7k8 ай бұрын
95% profit
@prevost86869 ай бұрын
👍
@sweetpadre9 ай бұрын
Do you open big truck oil filters? I'll be glad to send you one if you put it up on stage.
@WhipCityWrencher9 ай бұрын
Sure, I've opened some big diesel oil filters, send me an email to, Poker4me007@gmail.com
@missysass18069 ай бұрын
Like 32 👍
@aaronatwood92989 ай бұрын
The marketing wank is strong with the PPE filter. It looks like its a China or Thailand filter. With the nasty Mann filters we've seen that just look a mess of glue or zero care about filter quality... Even a the fram and champ struggle. Those Vietnam filters always seem to come out good every time.
@daewooparts9 ай бұрын
Calling BS on the PPE ,for both the filtration #'s & it's lacking the country of origin! ....& being overpriced
@WhipCityWrencher9 ай бұрын
Thanks Mark👍
@jamesyarbrough47776 ай бұрын
id use a proselect.
@armedprophet33219 ай бұрын
I would be worried about an oil filter that filters down to 10 microns creating some oil starvation, remember that oil DOES have to be pumped thru the filter. If it didn’t create an issue or possible issue I am sure Amsoil would make one that filters down to that level.
@WhipCityWrencher9 ай бұрын
True, you want a filter that has a decent micron rating without too much restriction. 99% at 20 -30 microns seems to be an average number. JMHO btw, Amsoil doesn't make oil filters, Champ Labs makes them for Amsoil, check out this link.www.rvandplaya.com/who-makes-amsoil-oil-filters/
@armedprophet33219 ай бұрын
@@WhipCityWrencher THANKS ! I just read that article you sent, excellent read. I knew that Amsoil didn’t directly produce their own filter but always wondered who actually made them. I just always felt that Amsoil wouldn’t pair a crappy filter with their oil products because too much is on the line in terms of reputation for them.
@WhipCityWrencher8 ай бұрын
@@armedprophet3321 You're Welcome👍
@morenothing4u9 күн бұрын
I would bet you it's probably 10 micron at 50%.
@oviss59465 ай бұрын
That is fuel filter 😂😂😂
@johnadrain13566 ай бұрын
Looking at the filter medium under a microscope is meaningless.You need to test the filters filtration capabilities. Using a magnet that isn’t designed to withstand the temperatures of the oil is worthless.Standard magnets degrade significantly when they are exposed to heat. Also using a magnet to magnetize the filter canister makes the magnet less effective.Using a silicon gasket at the sealing surface doesn’t provide as robust a seal and could fail during high oil pressures. .
@WhipCityWrencher6 ай бұрын
I don't think the microscope picture is meaningless. I can look at two microscope pics. and tell you which one will filter better and which one will allow a better flow.