WHITE OAK VANITIES: PT 2 VENEER doors

Рет қаралды 11,613

2 жыл бұрын

Thanks for checking in! Follow along as I continue the white oak vanities in this edge of your seat finish. Making the veneer doors out of white oak, classic core plywood.
Instagram: cabinet_wise
#cabinetry
#cabinets
#howto
#diy
#maker
#customcabinetry
#bathroomvanity
#whiteoak
#veneer
#veneerdoor
#plywood

Пікірлер: 35

@samyouledelmadani 8 ай бұрын

Very cool👌

@ignatiusjk 6 ай бұрын

Excellent job, nice attention to detail.

@kylapowell9750 Жыл бұрын

Beautiful!!!

@cabinetwise Жыл бұрын

Thank you

@BingSwimJoper 2 жыл бұрын

You make it look so easy - beautiful end result

@cabinetwise 2 жыл бұрын

Much appreciated. Thank you !

@bonitaassassin9862 Жыл бұрын

amazing

@cabinetwise Жыл бұрын

Thank you !

@BigmoRivera Жыл бұрын

Great Job Nicely Done😉👍🏽🪚📐🔨✏️ Great Idea With Pencil Mark For Wood Grain To Keep It The Same Consistencies

@cabinetwise Жыл бұрын

Thanks ! Glad your liking the vids ! More coming soon

@Dominic-nk8lc 6 ай бұрын

Hey thanks for the video, just made kitchen cabinet with Birch plywood 3/4” used white oak outside, do you think I should leave Birch unfinished or finish it ..if finish it with what !!? Clear code bc I don't want to paint it . Thx

@Benmeglei1 5 ай бұрын

Hi Richard quick question, when you calculate the gap between two doors or drawers, do undersize the lengths to take into account for the edge banding thickness or does the edge band just bite into the 1/4 gap. Hope this makes sense

@dougwells8463 Жыл бұрын

Watched this video again, just love your level of craftsmanship. Generally are flush inset cabinets quite a bit more costly vs. standard face frame cabinets like these? Flush inset drawers just look so elegant.

@cabinetwise Жыл бұрын

Thanks ! Appreciate the support . I’ve got a lot going on behind the scenes and once I’m set up in a new space I’m planning to release a new vid each week ! Yes the flush inset involves more labor so more expensive since i scribe fit each front into the opening for a perfect fit .

@bowerscustomwoodworkingllc 2 жыл бұрын

The grain matching looks great! You have a super well equipped space, is there any machines you would add given the opportunity?

@cabinetwise 2 жыл бұрын

Thank you! Yes it all gets the job done . Certainly would add a large drum sander and possibly a dovetail machine. Also a larger planer. There’s always more you can buy for sure .

@paullasko2023 Жыл бұрын

I'd love to know more about your choice of sheet goods for both carcasses, drawers, and doors. For e.g. grade, panel core, thickness, and species for both paint grade and stain grade application.

@cabinetwise 2 ай бұрын

For the carcass we use c2 maple ply veneer core . For the doors we use A1 white oak with a classic core . All 3/4 thick . Even if it’s paint grade we would use an A1 for anything outside the cabinet . It finishes smoother than the c2 , which we only use for interiors . So for paint grade we’d use maple a1 and often times for doors if this style just using 3/4 mdf with maple edge banding . Which paints up nice . We wouldn’t paint white oak bc you’d see the prominent grain through the paint .

@LandonSugar 5 ай бұрын

Great video. What does your finishing process look like if you were to do a clear coat on this vanity? I've heard sealing with de-waxed shellac and then apply water based poly. But would like to know your thoughts! Thanks.

@cabinetwise 2 ай бұрын

I’m not the best person to ask about finishing . I send all my work to my local finisher as it saves me time and allows me to move to the next project quickly . He sprays mostly with conversion varnish . That being said this white oak with a clear coat does look nice !

@mrtrader4628 2 жыл бұрын

Just came to your page, but very good a bit fast for us new wood worker but thanks. Need more steps and reasons why you do a few things the way you do them. but I will be keeping you on my list.

@cabinetwise Жыл бұрын

Thanks ! I hope to get better at making videos over time . I dabbled in a making a few a while back but I then took some time off due to lack of time but a new vid comes out tomorrow I hope people will see an improvement over my last stuff .

@winnielim5565 2 ай бұрын

Love your video! I would like to know where you can get a white oak A1 plywood from?

@cabinetwise 2 ай бұрын

Thanks ! We source from a local company called Moore newton hardwoods

@thejoeldanger 2 жыл бұрын

Dig the videos! What got you into cabinet making as a business?

@cabinetwise 2 жыл бұрын

Thanks ! Glad to hear it . A close friend of my family became a mentor to me after high school and he taught me all about the trade . I took to it pretty quick and it was at a time (back in 2004 ) when there was so much work. I had been working for him in the summers even before graduating high school and after graduating went right to work and never looked back . Even in the recession of 08 we remained busy throughout my early years and it’s never really slowed down. Can’t imagine doing anything else .

@aidenkashi6110 Жыл бұрын

How long did this whole piece take to build?

@SR-te2db Жыл бұрын

Hey how do you choose plywood that doesn't give off that barberpole effect when stained?

@cabinetwise Жыл бұрын

I just make sure it’s a premium grade material and select carefully . It helps that there were stained pretty dark too. The color looked very even and consistent but yes that’s something to watch out for .

@dougwells8463 Жыл бұрын

Where are you located?

@cabinetwise Жыл бұрын

In the east San Francisco Bay Area, California

@allsurf Жыл бұрын

Staining white oak dark. Noooooo! Lol

@winnielim5565 3 ай бұрын

@@cabinetwise Bay Area where is your shop?

@pattiamaya4671 Жыл бұрын

I am having a hard time paying at the minimum 700.00 for an MDF 60" Vanity and I don't want to pay $2.5K for a vanity in a vacation home. I know I could make the carcass and LOVE the feet but am worried about the drawers. It looks amazing. Would love to see the final image.