YOU CAN MAKE IT (Bathroom vanity cabinet *part 1*)

YOU CAN MAKE IT (Bathroom vanity cabinet part 1)

Рет қаралды 48,237

2 жыл бұрын

Follow along as I built this 112” built in bathroom vanity for a client . It’s paint grade alder , bead inset with solid slab doors .
Thanks for watching !!
.
.
#cabinetmaking #customcabinetry #bathroomvanity #cabinetbuild #cabinetshop #tutorial #howto #cabinetmaker #cabinets #cabinet #workshop #skillshare #woodworking

Пікірлер: 114

@jkirby-vd1wm 11 ай бұрын

The bead detail on the face frame is a nice touch. Also I have seen were the false front panels have tilted out for smaller items.

@thanksididitmyself 8 ай бұрын

Thanks for sharing how you milled the bead! I love the idea of having the detail on the face frame and not on the cabinet door itself.

@SableSunsets Жыл бұрын

Such an awesome channel. I guess if you did more trendy KZfaq woodworking you would have 1 million subs but I think you blow away other channels. Cabinetry is a great useful skill and profession. You do it well sir!

@cabinetwise Жыл бұрын

Really appreciate this comment ! It will keep me motivate haha . I can only be myself don’t want to copy what any one’s else does. I do want to provide value so hopefully Ill keep improving in the way I show what I do. People will either watch or they won’t 🤷🏼‍♂️

@marenrjensen Жыл бұрын

Love this long-form type of content on cabinetmaking. Great work!

@brewted 2 жыл бұрын

Love your hinge drilling machine

@billjensen7832 9 ай бұрын

You do a great job and I appreciate the instruction and the entertainment. I also like that you don't have a million dollars of shop equipment to make your crafts. Thank you and cheers from Wisconsin.

@MarceneiroFDS Жыл бұрын

Wonderful job man!! I know what it takes to make a video of what you do everyday, it is an another full-time job by itself!!! Not easy at all and as you said is all about the audience engagement. The apreciations a side, I am an entusiast of the cabinet making from plywood, natural finish, stained, painted or mixed finish. The simeple yet delicate metal and hard wood furnitures are a good combinations too. Thanks again!

@Markw8480 Жыл бұрын

Crazy shop!!!cabinets everywhere

@MarksmansWoodshop 2 жыл бұрын

That was truly impressive, I learned so much from this video! I can't thank you enough for sharing this information and providing us with encouragement to try it ourselves! Seriously looking forward to the next installment!!

@cabinetwise 2 жыл бұрын

That means a lot Jason thanks ! Feels good to hear bc I always feel like I could have been more clear about something and wonder how I come across

@hasbollahhasbol3834 Жыл бұрын

Tqvm..hasil kerja yang sangat bagus.

@rafemaxwell4143 2 жыл бұрын

Nice work man. Cool oldschool cabinet shop

@cabinetwise 2 жыл бұрын

Thanks! Yes definitely old school and I like it that way. It’s all I know

@jennylester3013 Жыл бұрын

very nice thank you

@troydonavon4165 2 жыл бұрын

Solid work!!!!

@cabinetwise 2 жыл бұрын

Thank you !

@atillaserdar8988 10 ай бұрын

wow bro

@kathytegreene1562 Жыл бұрын

Stunning!

@cabinetwise Жыл бұрын

Thank you

@letsbuilditworkshop3193 2 жыл бұрын

Amazing!!

@cabinetwise 2 жыл бұрын

Thank you! Glad you enjoyed It

@marlonorantes8137 9 ай бұрын

A DIYer doesn’t have all those machines. Can you consider making a simple frame/cabinet with common tools? I did splurge on a nice table saw.

@lifenlunacy5833 2 жыл бұрын

This is a beautiful cabinet

@cabinetwise Жыл бұрын

Thank you !

@christiantierno3309 2 жыл бұрын

You do great work brotha. As someone who has only been in the full time game for less then 2 years and it’s really interesting to watch, learn and hopefully implement new Tactics into my shop. Keep up the great work!

@cabinetwise 2 жыл бұрын

Thanks !! Your already farther along than I was 2 years in . Keep up the great work !

@allsurf Жыл бұрын

Nice work. I’ve been at it for 22 years and do this the same way except I don’t make my own bone molding lol. 🤙🏼

@peteswope5384 2 жыл бұрын

Great video, Learned so much in both technique and design. Really liked the bead detail around the doors and drawers. Thanks please make more.

@cabinetwise 2 жыл бұрын

Thanks so much. Glad it was helpful. I’ve been surprised by the amount of people watching . I had zero subs when I made this . I guess I do have to make more now haha . As soon as im caught up on some projects im in the middle of I will.

@trevorholman3119 2 жыл бұрын

Would love to see all kinds of cabinet techniques. Drawer and door styles, etc. Just they way you've done some assembly work I haven't seen done before, very cool.

@cabinetwise 2 жыл бұрын

Thanks so much ! Love to see the feedback. I didn’t know what to expect when I make this vid as I had zero subs and now it’s starting to grow so as soon as I’m caught up on my current work load I’ll be making more .

@edwinvelasquez9179 2 жыл бұрын

You earned my subscription. I like all your videos keep it coming

@cabinetwise 2 жыл бұрын

Thank you ! Means a lot! Finally have new vid posting today . Going to try to keep them regular

@rive242 2 жыл бұрын

Rich- what a great video! Thank you for taking what was obviously a lot of time to create and edit this video. Will you do a video about the scribe fitting of the doors and drawers? Also, will there be a video about the cabinet skirt? This looks absolutely fantastic (the build and video).

@cabinetwise 2 жыл бұрын

Yes ! That will be part 2 coming soon! Thanks so much . Glad you liked it .

@socalteakjriley2038 Жыл бұрын

Woah Dane Cook makes cabinet videos on KZfaq. Great job 👌

@cabinetwise Жыл бұрын

😂

@michaelny6692 2 жыл бұрын

Stay encouraged to be encouragement for all who you influence. Me likes your work!!! Stay motivated!

@cabinetwise 2 жыл бұрын

Thank you! I need to hear that bc I’ve been really running on the ragged edge lately trying to keep up with a huge work load . Can definitely get to you. Almost through it and more vids will be coming. Hoping to get better at this .

@jar944 2 жыл бұрын

Always interesting to see how others do things. I do just about everything differently. One thing that I did find interesting was that you flush the partitions to the drawer side. I always flush them to the hinge side(really a 1/8 or 3mm reveal) to avoid seeing any blocking.

@cabinetwise 2 жыл бұрын

Definitely is interesting. Yeah I’ve seen people doing all kinds of ways and I wouldn’t say this is the best way just how I was taught in the interest of doing it quickly . The goal was always making the best product in the quickest time . Now I’m so practiced at this method I can do it very fast without really thinking about it at all . As for the blocks that’s probably a good call about not seeing them , I just always flushed out the drawer bank bc it needs no extra space in there and that’s less filler strips I need to put in for the slides .

@harpreetsingh1371 2 жыл бұрын

you are great buddy you will grow for sure on youtube

@cabinetwise 2 жыл бұрын

Thank you . That means a lot . I’m still trying to figure it all out from a content perspective as I’m a novice doing this. Hoping to find a groove and schedule soon where I can balance this and still keep up with my insane work load without getting behind!

@3Dgifts 24 күн бұрын

Thumbs up, love the work, but I got seasick with those camera moves 🤢 I actually need to build something similar. Great inspiration.

@cabinetwise 24 күн бұрын

Thanks appreciate that . I do need tone that back . I try to make it feel fast paced so people don’t click off haha . I’ve just uploaded a new vid I’d be curious if you think I’ve dialed it back enough or if i still need to go further in my path to stability .

@3Dgifts 24 күн бұрын

@@cabinetwise I’ll check it out. Great work and love the helper 😅

@cabinetwise 24 күн бұрын

@@3Dgifts appreciate it ! Haha yes he’s still around doing his part

@3Dgifts 24 күн бұрын

@@cabinetwise That looks like a gorgeous piece you’re building. I will have to watch it with my coffee in the am 😃 Yes, scale it back about another 80%, slower transitions. Great the way you show the plans and explain everything, then going to execution. I’m glad I found your channel. You do nice work. AND please don’t take the comment in a negative way, I want to see your channel blow up with subscribers. See you around. PS, give the helper a cookie 🍪

@cabinetwise 24 күн бұрын

@3Dgifts haha will do , thanks ! No worries about that I do like to know where I can improve because at the end of the day I just want the best result , Appreciate the support !

@thomasforselius3961 2 жыл бұрын

You sir earned another sub. Very nice video!

@cabinetwise 2 жыл бұрын

Thank you! I hope to get better at this over time . I’ve just been backed up lately with a huge work load but more vids to come !

@thomasforselius3961 2 жыл бұрын

@@cabinetwise don't burn out though man! Don't spoil us at the cost of your business or well-being :) Best wishes from Sweden

@LoveAngelesMusic 2 жыл бұрын

Very cool. More mulder!

@cabinetwise 2 жыл бұрын

Thanks .. he did complain about not getting enough screen time .

@deanowright359 6 ай бұрын

Great video ! Not long at all

@kenbingham2044 2 жыл бұрын

Nicely done. I am a newby and I appreciate the time you took to explain what you did. One question: what type of biscuit joiner attachment are you using?

@cabinetwise 2 жыл бұрын

Thanks glad you like the vid . It’s just a simple old Black and decker . Nothing special. Lots of old tools around here

@Indycrr 2 жыл бұрын

I really like how clean the face frame is. That has to be one heavy beast of a vanity at 9 feet. Wrestling that upstairs to install doesn’t sound fun at all.

@cabinetwise 2 жыл бұрын

Thanks !! Yes very heavy

@jeffshackleford3152 Жыл бұрын

That is what the laborers are for. Just make sure you teach them stuff as their reward for wrestling that thing up the stairs.

@bmiller2 Жыл бұрын

Great video! Would love more details on how you do the actual bead strip. Profile of the bit, do you run it two ways ?

@cabinetwise Жыл бұрын

Thanks ! Glad you liked it . Posting a new vid tomorrow finally . First in months. It’s a 1/4” bead with 1/8” of flat below it. .it’s run once then ripped down to size on the table saw. If you message me on Instagram I can send you a picture of the bit if you’d like @Richin_cabinetry .

@johnmclarty3201 2 жыл бұрын

Great Video. Do you have a video of the finished project with however you painted/stained?

@cabinetwise 2 жыл бұрын

Thank you! I’ll do a walk through vid over at the site when it’s all finished over there . It’s a whole project with a kitchen , media center, laundry room … It has been installed and I did just post it on my Instagram. @Richin_cabinetry ..It was painted Benjamin Moore origami white

@jkirby-vd1wm 11 ай бұрын

Would be great to put a couple charging ports in the drawer for the toothbrushes

@janicetribbiani7535 2 жыл бұрын

That was a bit nerve wracking before you used the push stick. 😬

@jamesmkoenig Жыл бұрын

Very nice. What wood did you use for drawer sides? Is that maple plywood with edge banding? Hard to tell. Good work btw

@cabinetwise Жыл бұрын

Thanks , yes we offer different drawer options at different price points , these ones are maple plywood edge banded , we also do hardwood maple sides for dovetail drawers

@JOIHIINI 7 ай бұрын

Hey sorry. These may sound like stupid questions but im just trying to educate myself as best as i can through youtube lol. What exactly do the joiner and the plainer do to the wood that makes them essential? Ive done a lot of finishing carpentry in a bunch of my houses and installed a good 15 kitchens and have built some pretty cool stuff over the years but have never needed to work with wood with such precision. Im trying to make something one off for my bathroom and want it to be stain grade. I know people will probably tell me im dumb for asking this but honestly if ya dont ask ya dont find out and i dont do carpentry for a living... if u could plz help me or point me in the right direction id appreciate it so much cuz i wanna build sometning with beaded inset and this is as close to my vision as possible. 😅

@delfordchaffin5617 2 жыл бұрын

Very nice! What brand/model were those door hinges? Thanks!

@cabinetwise 2 жыл бұрын

Thanks ! The hinges are BLUM

@stanleyphan6107 8 ай бұрын

Please add links or model numbers for these inset door hinges and plates. Thank you

@crownmoldingbyspectaculart941 Жыл бұрын

Enjoyed your video. Just curious why you prefer alder instead of poplar?

@cabinetwise Жыл бұрын

Thanks ! It’s more durable than poplar. Poplar Is a little softer

@biglav6048 Жыл бұрын

Great content! Curious, why use alder vice poplar or even maple if it's paint grade?

@prestonfeivor5488 Жыл бұрын

density of the wood is the biggest reason. I hate poplar, dents if you flick it hard enough lol

@cabinetwise Жыл бұрын

Alder just because it’s so easy to work with and sands quicker than maple . We do use maple upon request when people want a harder wood. Since it’s custom work we do , really it’s whatever the client wants. Very much agree about poplar being too soft

@elyseruben4143 2 жыл бұрын

Just curious why you didn't use 1 side prefinished maple plywood as this saves alot of time in the finishing process. The expense is off set by the amount of time spent finishing, both for the walls and the backs? Also I assume that this vanity is going in between 2 walls because of the way you installed the back pieces? No dado to catch the backs?

@cabinetwise 2 жыл бұрын

This is really just how I was taught. Not necessarily best way. It may not be a good method for everyone. The way we have the business set up , we build with all unfinished materials then send to our finisher who first sprays all the interiors clear conversion varnish. I do rabbit the finished ends but usually not the unfinished ones . I’ve found the staples adequate to hold the back securely on but to each their own. Often I need to get these done quick and this works ..never had a back fall or break off in 20 years .

@hectorocasio3288 Жыл бұрын

I work in a cabinet shop full time and this is the way with the backs for production makes it easy to square quickly and no fuse with groves we have more joinery cut in are cabinets but that’s because of cnc

@DsHardWoodCreations 2 жыл бұрын

Subscribed to ya

@cabinetwise 2 жыл бұрын

Thanks !!

@Djvickers20 2 жыл бұрын

you need to get a cnc machine with the mozaik software. it would pay for itself pretty quick. but very good work.

@cabinetwise 2 жыл бұрын

Definitely! Although all that seems intimidating to me 😂 I need to learn some new ways perhaps.

@zaphod6998 2 жыл бұрын

Speck Yeah!!

@cabinetwise 2 жыл бұрын

Fancy seeing you here . Right on ! Thanks for stopping by !

@williammcrae3177 2 жыл бұрын

You could definitely use one or more scissor lift tables to improve the ergonomics of your operation🙂

@cabinetwise 2 жыл бұрын

That would be awesome

@user-ps2rs9kb7h 2 ай бұрын

Richard, In your under pressure video you stained the inside of your cabinets and painted the face frames after assembly. How did you do that? Also, do you have a place for your contact info?

@cabinetwise 2 ай бұрын

Hi . Our standard practice is to either stain or paint the face of the cabinets . (The face frames and the doors) . the interior is maple, which is sprayed with a clear coat . The interiors are sprayed clear first . Then it’s masked off and the faces are then stained or painted . Hope that makes sense . Contact is Richard@cabinetwiseshop.com Also on Instagram cabinet_wise

@nancywilliams8954 Жыл бұрын

Great video? What is the width of each face frame piece?

@cabinetwise Жыл бұрын

Thanks ! New vid coming out tomorrow . 1.25”

@b1j 5 ай бұрын

Great summary and narrative. I cringed when you pushed that 1x2 over the jointer with your fingers. Don’t do that.

@stevendemarcus1321 2 ай бұрын

Oh heavens. This man has built more cabinets then most have ran a single power tool. I think he’s Ok…

@jeffshackleford3152 Жыл бұрын

I assume you do not do enough beaded inset to get a haunch cutter?

@cabinetwise Жыл бұрын

Exactly. . I did one bead inset job in the past year. Around here everyone mostly wants full overlay shaker or slab style cabinets the past couple years

@jeffshackleford3152 Жыл бұрын

It is the same here, I just happened to work at the beaded inset and super high end custom stuff shop for my area. I have to say I got very lucky with that being the first shop I worked in because I did not pick up any bad habits other than being too meticulous for things I shouldn't be meticulous on.

@cabinetwise Жыл бұрын

Nice , yes well said . It’s an interesting topic. Im actually pretty meticulous too by nature and was actually trained at one point by a very meticulous craftsman who’s name is also Jeff.. later on got to the point of learning to run the business and now owning my own shop, I’ve had to balance that urge with speed and practicality to survive . Not letting perfect be the enemy of progress as one person I heard say it . No doubt if I had unlimited time to make furniture I’d do many things a lot differently!

@eapc74 Жыл бұрын

What kind of bead did you use?

@cabinetwise Жыл бұрын

Custom milled 1/4” bead

@ianmelencio5752 Жыл бұрын

What is name of the router bit? Tnx

@cabinetwise Жыл бұрын

It’s called a traditional beading router bit. This one is 3/16” r

@victorskunk4441 2 жыл бұрын

You could have used more staples on the back and why not more pocket holes on the frame. What happen to glue and craftsmanship putting wood together. Screws tells me of an inferior (easy way out) product. That is all you need nowadays to built a cabinet a couple of big machines and a screwdriver.

@williammcrae3177 2 жыл бұрын

I think this type of construction is adequate in these times as most kitchens & bathrooms are remodelled ~ every 10 years unlike the good old days when multi generations enjoyed the craftsmanship of the past.

@cabinetwise 2 жыл бұрын

You do make a good point and that’s an especially important mindset in furniture making . This is production cabinetry. It’s just the nature of the beast. To stay in business you have to move fast so it’s the less glamorous way for sure . I do hope to have more time in the future for some fine furniture making though .

@cabinetwise 2 жыл бұрын

@@williammcrae3177 it definitely would seem that way and maybe there’s more than meets the eye but our cabinets have been built this way for 3 decades and we have customers from 20 yrs ago who say they are as solid as new. But I’m definitely always looking to improve.

@leolm1141 4 ай бұрын

POSEIDON

@jerrytaliercio9087 Жыл бұрын

You can make it? Don’t have those machines.

@cabinetwise Жыл бұрын

Fair enough . Although this can actually all be done with far simpler tools in a basic garage setup with the same principles applied . But yes certain tools are required.

@restholzjunkie 2 жыл бұрын

I cannot see the Video until the end. I will not see flying fingers, bones and spreading blood when you work on the Tablesaw. As a professional you should consider to use Pushsticks and build a dustcollection or dust hood over the blades to prevent from getting your hands too close to the blades. These kind of videos are too dangerous to teach makers. The most worse idea in addition to this is wearing gloves that get hit by the blade and pulling it into the blade. The headline to your Videos should be changed into "How NOT to..."

@cabinetwise 2 жыл бұрын

Good points . I’ve probably become too comfortable in nearly 20 years of doing this. Also when I made this I had zero subs . Had no idea this many would even see it haha. Definitely will take this in consideration for future videos.

@garrrhudson 2 жыл бұрын

Yeah I agree on the safety. Great work and information, really enjoyed the vid but I’ve no idea how you haven’t lost a digit or 2 over the years 😱Even your push stick is too small to be considered “safe” 😂