Toyota should sell this as a crate engine

This series never disappoints. Giving just enough detail without getting to far in the rabbit hole, good job man..An Audi RS line in the future video would be sick!

How did I catch this video so early. Guess it gives me as good a chance as any, your videos are always very informative yet entertaining to watch, keep up the good work

Great job at explaining everything! This video should save a lot of people from buying the wrong engine for their dream build . There’s a lot great information in this video and awesome animations!

Great episode! It would be awesome to see an episode one day on the Ford 300 straight 6, lots of industrial use and good history.

The 7M is severely underrated, people swap them out for the other engines but they need some love too.

The J engines didn't start from the big bore spacing six cylinders, but as a follow on from the G and S series Four cylinders, which had drastically reduced bore spacings from the 2T, 3T and 18/21/22 R engines to fit in the transverse front drive engine bays, mandated to fit the JDMs maximum 67 inches car width. The Celica XX had the first incarnation of the 3.615 bore spacing engine. It's effectively a mirror imaged six cylinder 3SGE without the Center cylinder bore pitch difference. As an engine, it's strong, but it's still only a narrow bore pitch engine, and it's peak cylinder head flow is way below the larger 1989 onwards Nissan RB26 and the '02-'16 Ford Barra Falcon 4 liter engine. Block strength is limited by oil galley positioning, but it's the way the 2JZE responds to turbo boost that makes this engine such a force. Great video, respect for your energy and sharing the Right Info!

I would also add: The GTE motors are non interference engines. This means that when your timing belt snaps or skips tooth, the pistons don't meet the valves. This is with stock pistons and stock cams of course. There is another significant difference between the GE and The GTE shortblock: the GTE block has two oil feeds on the exhaust side of the block that the GE doesn't have. They can be added tho.

Best thing about the 2JZ It's so perfectly balanced that it doesn't need a lot of strength in the block there's not a lot of shaking To f*** s*** up

Bro.... I gotta say this is one of, if not the best informative videos I have seen yet on the 2Jz. Thank you very much for taking the time to do this. Much appreciated!!!!

Recently found this channel!! Thanks for being so damn informative but not just droning on and on and on. The editing in this video is what kept me watching!! Good information, video clips to help support facts, as well as not falling into the rabbit holes of information that comes along with engine machining!!

Its rare that an amazing youtuber and a super interesting topic cross paths, to form a KZfaq video im genuinely so excited to watch, words can't describe.

Loved the video man. Especially when you added in the over night parts from Japan saying. Would love to see a video on the 1jz and other toyota 90s engines like the 1uz and the rest of that family. Can you do a second version of the videos that go a little more in depth of engine break down. So any Newcomers to the engine world would understand how they work. Would love to see that incorporated into you videos. Good job man this series is a hit.

For the love of god yes I love 2JZ content please feel free to do more

Dont stop this series. You are dropping great knowledge.

these segments are glorious! the details and the animations are super nice too. fire setup for sure

Fantastic content. Love the diagrams and sound clips. Gotta do the AUDI 5 CYLINDER!!!!!

Some of the best content for car fanatics on youtube comes from 337Speed. Thanks for the hard work in making these videos.

Great channel, I just stumbled on it. I’m really enjoying your depth of knowledge. Thank you!

I could never get tired of this channel. Keep going brotha. See u at 250k

You have been killing this series! Could we get a ea888 gen 3 or a gti breakdown? 😂🤘

First off...really enjoy your videos, especially these about the engines!! Now, the following is my wish list: 1) Old school Big Blocks from the Big 3! 426, 427, 428 and 429 2) Old school Small Blocks, 340, 302, 305 and 350 3) 4cyl turbo's compared from Dodge (early and late model) Chevy, Ford, Honda etc. 4) 6cyl Turbo's Barra vs 2jz vs BMW Heck, toss in Mitsubishi's and Nissan's too from the old 300Z and Stealth/GTO.

Watched one video and this channel is under rated like crazy. Loved the vid man!

You did it (uploaded this video ) thats awesome i seen some one requesting this specific engine and there you have it now thanks bud this shall be awesome

Once again another great concise and to the point vid!!!

Dude you’re one of the best youtube car channels I’ve seen you are a gem

Really liking the videos. Would like to see a video on the 6g72 out of the GTO. definintly seen these engines hit 500-700 whp on stock bottom end. Difficult to work on in car but were pretty sturdy engines for the time.

Holy shit you're putting these out quick!

An episode about the n54 would be sick… It‘s my absolute favourite Motor! Love your Videos!

Dude, bro, your channel is top three on youtube imo. Keep it up.

Don’t stop doing these bro, top tier stuff

Great content bro, I really appreciate the effort, all the animations all the details. Much love man❤️‍🔥

BROOO where have you been I've been looking for such a channel IM SO HAPPY TO finally find you this is my second review

There are so many videos on this subject, but this is a great one 👍👍

Hey man I found you a while ago from your build a turbo kit video and I ended up building one along with the help of the turbo forums lol. This is seriously one of the best youtube channels out there for explaining the specs and details and the 'WHY' behind a lot of my questions. Anyway, Was wondering if you were ever going to make vids on bike engines?

Super great video thank you. All this info is on point

Great content hopefully you do the 4g63 soon

My ideal build would still be 2 twin scroll turbochargers on the older GTE w/VVT. Twin scrolls work especially well with variable valve timing and you can do some amazing chit with them, especially as far as launching, anti-lag control etc. they're fun.

I swear you need to do those on podcast forms ! I'd love to listen to all of them at work !

Always love watching your videos. Can’t argue with data

Maybe Ford Barra next?

Simple, huge potential and extremly reliable. That's why it's still the best.

Appreciate the thorough understanding

How badass, he doesn't he even have an outro, keep up the good stuff man you are an absolute legend!

Good vid! Go ahead and do the goat of 4 bangers. The infamous 4g63!!!

I love these Explained episodes so fucking much jesus christ, keep up the great work bro!

Great videos and information you’re putting out! Would love to see a RB motor explained!

Bruh, your videos on engine history are AMAZING! Please keep doing them. I'd love for you to do some videos on dead platforms too, where'd the terrible Cadillac Northstar come from?!

Love your videos! Keep up the good work!

I love this series! Keep them coming

I've been curious about this engine, now I know, you sure know your stuff. TY 👊 😎

Favorite account on tik tok is now my favorite on KZfaq. Love this videos!

love these vids bro

Quite the shock seeing myself in one of your videos, such an honor! Loved this episode, keep up the good work on this series!😀😀

Please make a video on the EJ engines! I think a lot of us would love that Loved the video!

@337 Speed Are you going to cover the motor from the 90's Nissan 300Z's? That would be dope. You do great breakdowns.

would love to see a video about the GT-R’s RB26 and VR38

This is the video we were all waiting for

Could you please compare the 2jz-GTE with the rb26 DETT? Because opinions differ on which engine is more powerful and I think i would be interesting to see a scientific comparision! Also keep up the good work man!

337 has created a monster of a series….

It was the first alternator replacement I’ve ever done. Man one bolt was stuck on the bottom so hard.

Love the content can you do 1 on the 2gfse fe engines?

@337 SPEED can you do a vid on the often forgotten Ford Bara straight 6 please?

this channel is so fire i love it

Subbed the other day, watch everyday since

You should do a video of the barra ford engine and reason why it’s good and also why it didn’t come to America

Just subbed. great channel!!

should do a video on the toyota 1FZ 4.5l. never came factory turbo but head-studs, mls gasket & bigger injectors you'll push 600hp, saudi dune dragsters making 2500hp

I would love to see a video like this for the RB26DETT and 13B-REW

I'm curious where are you getting the 3d models/renders of all the engines you make videos on? I'm in school for 3d animation and would love to get my hands on the files if they exist anywhere.

Say big dawg 🙏🏿 you got the 2JZ, can you do da RB series for da Nissan homies?

I have 2 2jzgte and 3 1jzgte sitting in storage from 2016 when they were cheap 👌

Just subscribed a week ago and these videos are awesome! Would you do a video on Audi engines, specifically their 4.0T engines in the S6/7/8, RS6/7?

you sound like the guy that says your charger with wheels and stickers is not a build. Also this vid was spot on man good quality with the 3d scanned blocks.

Great video!

you should do a video on merc v12s bmw v10s,v8s,lexus/Toyota v8s etc

Nice video! I know it’s not very popular but could you do a video about the Honda’s F Series?

Have a 99 gs300 myself, put stronger rods in the block and turbo’d it, been a reliable daily driver for about 9 months now 700-800whp, Love your vids man keep it up!

Brooo all this time on tiktok I never knew what that sound was until today 4:50

would love to see you do a video on the R34 GT-R

I will say this I had a 7m making 500hp back in early 2000s. Hks head gasket arp head bolts and good to go. I will say the 7m sounded the best out of all of them. Swapping out the intake manifold makes the 7m look much better.

hey how about a video on the volvo white block? or even the redblock?

Thank you

Keep it up homie

I know nothing about engines and I love this series lol

2jz's are great engines to make power on. You can build them to be very stout and make great peak power while having pretty good spool. Its biggest down sides are its length limits chassis design and the engine itself is pretty hefty. It would be very tricky to build a light weight 50/50 balanced car with a 2jz. You'd have to be a chassis wizard and a transaxle would be a must.

As a coyote owner. I felt a lil dirty watching this video. lol. But as a former K24z3 owner. WOOT WOOT!

Anything touched by Yamaha is a work of heart ❤️

Aye do the ford barra straight 6 next

I would absolutely love to see one of these episodes on the VQ/VR series engines from Nissan

6:44 Anybody else notice the wobble in the tire

excellent video 👍

Yeeeh another 2jz video!

Bro you gotta do a vid on the 03/04 Cobra engine

Just wondering if you'll ever do a toyota UZ family video (1/2/3uz) we have some bomb motors too

mitsubishi's saturn series please!!! (4g63t, 4g64) Awesome video nonetheless

Great video may f-sport motor be the LFA next .

Can you do a video on the 1uz family?

Can you do a video on the 3.7 liter mustang v6

Need more rb powers! 💨