I JUST WANNA SAY I LOVE YOY SO MUCH I’m a 17 year old lad starting my own business called bubble trouble and I litteraly would be no where right now if it wasn’t for you almost everything I learnt was from your videos and the results speak themselevss the cars I’ve been doing recently have been so incredibly perfect! Thank you!!!

I dress my tyres with a brush, having tried sponges but prefer the ease of use, application and finish I get from bristles. My preferred product is Autoglym Rubber Plus. I use a decorators plastic paint pot with two compartments, one for the product and another in which to stand the brush after use so the brush isn’t standing in product. It also has a brush hole above each compartment so you can seal the pot and prevent / reduce spillage, and there’s a brush groove in the divider so you can wipe off the excess product. Bought from B & Q, this for me was a game changer. I’m no longer in the trade but still use these products and method on my own cars.

Maguiar's Endurance Tire Gel is my favorite tire dressing. Next is Tire Shine from Turtle Wax.

Been using the CarScope one with their Tyre Ink and never had a bristle fall out.

I still use paint brush with wet look gel in a tub which works well for me 👍👍

As a bit of a hack, I currently used an old shoe shine sponge, which comes with the reservoir into which I dip the sponge (it's also the lid, which keeps the sponge damp) for any tyre solution used. I did used to use the brush and dip method during my professional days though. Back then, I put the solution in the equivalent of a tupperware container to keep any leftover solution.

After trying all sorts of applicators, for the last 4 years I have been using dollar store green scrub sponges on the soft side to apply dressing. It costs 10 cents per sponge and they last a long time. It:s really fast to apply too, about 20 seconds per tire. I don't use a gel. I use Meguiars All season dressing, a liquid dressing that I spray into the sponge. It uses very little product, about 4 sprays per tire so a liter bottle lasts for months in my detailing business. I always use a microfiber towel to wipe down the excess after I am done with all 4 tires. The last thing I want is for the dressing to sling all over the detailed car!

These type of brushes are great for cleaning emblems especially when paired with water spot remover. They are firm enough for scrubbing but delicate enough that they won't scratch...perfect! I use one for dressing leather and I also have one for cleaning around all the buttons and fiddly bits on the dashboard/instrument panel.

I use an old detailing brush and have a small pot or dressing. And use a rag to wipe excess off. Way better than a sponge.

I have the carscope version of this, I have had it about 4 years now all the bristles come away around the outside. To be fair it gets used on my 4x4 tyres… not so good with meguires ultimate, but works well with car pro Perl neat, IW candy, and watery ones like M&K tyre go all over your hands like you say 😂

I bought three of these from Car Scope at the start of Lock Down and have never looked back even giving one to a car detailer as a wee gift. I have never had an issue with hair loss apart from my own head and unless I am changing product I have never rinsed it out. In my opinion the detailing product of the Century.

I use Tenzi Gum Extra high gloss tyre dressing. 1L trigger spray for 18.99. I use half of a yellow car wash sponge to apply. I flip cars for a side hustle and it’s plenty good enough for that. I also apply the same way on my own car.

I love mine, I just spray some Turtle Wax Hybrid Tyre Shine on and then wipe it on the tyre. I do load it up for the first tyre but then use less on the rest

One of the best handling cars ever made right there, the chassis on those are something truly special for an everyday car! Incase you didn’t know :)) I love mine, also with regards to getting the gel on the bottom of the tyres I watched a video on a product that’s designed to go under the wheels so you don’t get your knuckles scraped off I’ll see if I can find the link, maybe you could do a review on them! :)

Meguiars hyperdressing on a sponge applicator works a treat

I’ve been using a paint brush for over 20 years quick and easy

They are good and if you are charging the customer for maintenance or full details then the finish on the tyres makes all the difference

Nice video Dave. I use a cut up jumbo sponge and apply garage therapy's one tyre serum. Have also used it to do the trims on my sister's car which works pretty well.

Ask your wife/ girlfriend/ daughter for any flat top foundation brushes they no longer need and use it for tyre dressing. I would say the shapes are quite similar. (However, Dave's brush has a better handle for tyres)

i found using soft brittles brush for tire works best and time efficient. it cover more space. love all your videos ! from US

"Thank you for sharing such valuable insights! Your videos always inspire and educate me. I appreciate your dedication to creating content that makes a difference. Looking forward to your next upload!"❤

Great demo but the curbing on those rims 😱. Not a millimetre unscuffed 😂

Once again another fantastic and informative video Dave

Thank you for the video Dave. Looks a handy tool for a couple of quid. I'm a total cheapskate and spray Aldi multi surface polish on the tyres and then lightly go round them using an old kitchen sponge 🤣. Gives them a deep satin finish.

Well.. normally I don't give away my personal secrets.. BUT.. I like your channel and I'll give you guy's a freebe.. what I use may shock a few people but here it is.. stoner care trimshine in the spray can. It sprays very accurately and believe it or not, I have tried NEARLY EVERY TIRE DRESSING ON THE MARKET. And I come back to trimshine every time!!! Just haven't found anything better. It isn't over shinny, it does not fling off, dust does not stick to it and it lasts just as long or longer than any iso2 I have tried and best of all it takes me around 15 seconds a wheel or less. And if there happens to be be an area that I oversprayed a little I take a (another secret) tile sponge that I cut into 3 pieces to remove any extra. Or to apply to any tight places I spray it directly on to the sponge.. DON'T BELIEVE ME? give it a try I promise you.. You will switch and never look back..

Bought mine of eBay years ago for about £2 use gyeon tyre dressing thing love the stuff can be applied on wet tyres nice Saturn look lasts about 3weeks,.had AF tyre crème was a pain in the backside for me,started to use perl at there recommended dilution and it’s brilliant also for about 1week then dies of

I've been using the 2 quid Chinese ones, they are holding up very well so far. I find they are better with a gel than a liquid

i have had the Carscope one for a while (zero bristle loss) -- too small to hold and get hand cramps, I'm too old now for fiddly wee tyre brushes. back to large foam hex puck with IW Tyre Coat.

I use a spray tyre and trim dressing if i haven't detailed the wheels I'll just hold it close and spray it on or I'll use a sponge

Hi great video as usual have you tried putting a small amount of the gell in a self seal bag with the brush so it's always charged . As you wear gloves all you do is grab it from the bag and your away.

I still to this day prefer to use a 2” cheap paint brush for tyre dressing as the width goes round the tyre pretty much! I also use auto smart high style from time to time but also use on occasion Maguires tyre gel .

I can recommend using this brush with Carpro DARKSIDE Dave. Not gloopy, nice satin finish and lasts well. Less is more with tyre dressing IMHO

Hi Dave, I use a curved sponge with some Perl sprayed on off eBay 10 for £5. I consider these a desposable item as they get gunked up over time so it’s nice to throw them away after every 5-10 cars use a fresh one.

Reminds me of the Kiwi shoe polish sponges that were a fad years ago

I use a cut in half polishing pad👍

Why dont use a soapbottle that has a pump and fill it up with product. And the nozzle might be easier to jam in to the brush? Just a thought.

I have a applicator sponge, with a hard plastic handle, which is ok but I will give this a try. Maybe using a tin foil tray, like a Yorkshire pudding tray will be good to dip the brush in with product 🤙🏻

great videos with tips i also use 1 of these brushes and find it easier and you can control it better, i not going back to a paint brush

Ive bought two, thiught I'd lost one but i had just hidden it to well, and ive used it with the Soft 99 bkack tyre wax and it works really well nbut tends to clog up a wee bit by the time you've got to the 4th tyre

For God's sake that is not bird but Pterodactyl drops ! Did you ever go to Jurassik Park Dave 🤣! Seems like british bird have hell of a intestinal transit 😆 Ok, back to the brush itself. I'd like to say it really gives you an even finish on the tires, especially if you've got a lot of lettering, grooves or whatnot. Personnaly, I am more a tire hex grip applicator combined with Gyeon Q2 Tire guy, to be honest. Nevertheless, always nice to have a feedback from professionals and car enthusiasts from all around the planet. Cheers mate 😉 Gregg

Watchable content as usual 😊

I like to use an applicator sponge it gives great coverage

Dab!! Dab 4 spots around the tyre, reapply a small amount to the brush and brush it round. Saves product and applies it with more consistency.

Still using one after 25 years

I love my Alien Magic (green bristles) version. It says not to use with solvent based, but with GT Tyre Serum ive not experienced any issues. I do squirt a load of Surfex 10% immediately after, so maybe that helps

Looking forward to a bird poo video. Bird poo is my most hated thing about keeping my black car in good condition. Going off topic there though , back to the tyre applicator , I just use a jumbo cut up sponge with KKD bumper and tyre liquid. I always have to roll the tyres 90 degrees as I always feel the bottom part that is in contact with the ground never gets a proper application.

Dave hello from USA all you need is aqua gloss from superior products in a cheap harbor freight air paint gun and spray away

Do you know what I find best? Using those dishwash sponges, the yellow and green ones. A quid for 12. Works brill with Meguiars endurance

Great video. I considered getting one of the (rebranded makeup) brushes, but decided to stick with my foam applicator, following up with a brush to fill the crooks and nannies. As to the problem of reaching the bottom of the tyres, get yourself some Rimmats.

Its a great little brush and Temu do some decent stuff especially there wash mitts , tried some trye gel which is ok to be fair but there are better products out there for that .

I have had this little thing of a brush for yeeeaars, it's not that fantastic as it seems. Just use whatever you like to dress your tires. This thing won't do anything what so ever better than even a simple microfiber towel

I'm glad you didn't BRUSH this topic under the carpet 😂

Not for wheels but don’t bother buying detailing brushes for inside the car, just buy a cheap set of make-up brushes. Super soft and a much cheaper alternative. 👍

Did you ever do ebooks

Serious question now would you rather use a hand car wash or drive through automatic car wash?

Have tried shaped sponges without much joy. I use a paint brush for preference - would I consider this dedicated brush? Probably not - I’m old and can’t get on my knees to use something like this.

Alright, bud. I almost feel off my chair. I had to put on subs. Your testing bird poo 💩. That should be interesting. Does it matter what birds 🐦 have a poo on your car. Like seabirds would have a real salty diet while woodland birds would be more into berries, etc. You know where I'm coming from Dave. I think this bird poo video needs good investigation because just think where the people with a good motors live. Then you'll have the city slickers different birds could be 2 are more videos. Make sure you keep an eye on what products and over the time duration. That poo can do some serious damage to a high value motor. Great video my friend ❤

I use a mop for my tractor 🚜 tyres 😂

Valet-Pro 1 inch detailing brush. You’ll thank me later! 😉

I used one and it fell apart using Megs tyre gel

😊💪👌

Don't like these tiny little brushes, far too small especially on suv/ 4x4 takes ages and so much product. I've tried them all and still go back to the 2/3" paint brush.

First