Why Do FAST Drivers HATE Factory Suspension Bushes?

Рет қаралды 19,783

Күн бұрын

Building a fast car? Get $400 OFF the all-inclusive VIP package deal: hpcdmy.co/vipy50
Get 50% off your first Suspension Tuning Fundamentals course: hpcdmy.co/offery50
No competent driver likes a car that moves around under braking and is lazy to turn in or out of a corner for no good reason, so they throw many OEM suspension components in the rubbish bin, including factory rubber bushings. Why?
James Bourn of Powerflex explains that while rubber bushings, aka bushes, provided by the OEM are good at cutting back noise, vibration and harshness (NVH), they are not made to last, nor are they made to perform. They are made to tick the right boxes for the price without compromising handling so much that they get land vehicles with poor safety ratings, as well as lasting just long enough to not be a warranty claim.
For better performance, one alternative is to remove as much compliance as possible using solid bushes, mounts and spherical bearings etc., such as you find in many dedicated motorsport applications. But this, 100% without fail, introduces incredible NVH that is white noise on a race track and permanent hearing loss inflicting, or divorce, territory on the road.
Instead of solid mounts or rubber, we can have our cake and eat it too with polyurethane options instead which offer less compliance than OEM rubber bushes along with a longer lifespan, to the point they come with a lifetime warranty (but only for road and classic car use, NOT the BLACK SERIES aimed at motorsport sadly!), along with levels of NVH that won't give you PTSD from a 12-hour cross country road trip.
On top of that, polyurethane bushes will give you, the driver, more confidence in the vehicle leading to more consistent lap times and pace, making better use of all that time and money it takes to get your car out on track in the first place.
------------------------------------
TIME STAMPS:
0:00 - The Last Thing Many Think Of
0:26 - Rubber OEM Bushings
1:15 - Why OEM Use Rubber
1:58 - NVH Considerations
2:51 - Compliance (Movement) & Solid Bushes
4:10 - Polyurethane Performance
5:02 - Powerflex Bush vs OEM/Factory Bush
5:59 - Deflection Testing Comparisons
6:35 - Less Compliance = More NVH
6:44 - 'Insert' Bushings
7:51 - Inserts Assume Bushes Are Serviceable
8:03 - Wear Over Time
9:07 - Driver Feedback
9:24 - Thank You, James!
10:00 - The More You Know, The Faster You Go!
------------------------------------
FREE LESSONS:
🏎 Want to learn how to EFI an aftermarket ECU like a MoTeC, Haltech, Link, AEM, Syvecs, EMtrom, Maxx, Ecumaster, MegaSquirt, Arduino, MicroSquirt, Holley, FuelTech, ME or something else entirely different? Start with some free lessons right here: hpcdmy.co/EFI101y
💻Start learning how to reflash tune your stock ECU using platforms like HP Tuners, EcuTek, COBB, EFILive, Hondata, ECUFlash, Romraider, WinOLS and more! Sign up for the next free lesson now: hpcdmy.co/hptly
⚠️ Want to learn more about motorsport wiring? Claim your spot in the next FREE lesson: hpcdmy.co/wiringlessonyt
🧰 Learn more about Performance Engine Building by coming along to the next FREE lesson: hpcdmy.co/eby
🔧 Interested in learning how to do your own wheel alignment for the track or street? Start with a free alignment & suspension 101 lesson now: hpcdmy.co/aljyt
🛻 Learn more about performance diesel engine tuning. Start instantly with 4 free lessons: hpcdmy.co/essential-diesel-kn...
------------------------------------
LINKS:
Website and Courses: hpcdmy.co/hpa
Podcast: hpcdmy.co/podcast
Merch (HPA tees & hoodies): hpcdmy.co/merchy
------------------------------------
TAGS:
#highperformanceacademy #powerflex #bushes #powerflexbushes #bushings #bush #polyurethane #suspension #suspensionparts #racecar #auto #automotive #carmods #trackday #datanerd #gofasterwithdata #racecraft #learndriveoptimise #motorsport #buildtunedrive #sema ‪@semashow‬ ‪@PowerflexSuspensionBushes‬

Пікірлер: 68

@hpa101 11 ай бұрын

Building a fast car? Get $400 OFF the all-inclusive VIP package deal: hpcdmy.co/vipy50 Get 50% off your first Suspension Tuning Fundamentals course: hpcdmy.co/offery50 TIME STAMPS: 0:00 - The Last Thing Many Think Of 0:26 - Rubber OEM Bushings 1:15 - Why OEM Use Rubber 1:58 - NVH Considerations 2:51 - Compliance (Movement) & Solid Bushes 4:10 - Polyurethane Performance 5:02 - Powerflex Bush vs OEM/Factory Bush 5:59 - Deflection Testing Comparisons 6:35 - Less Compliance = More NVH 6:44 - 'Insert' Bushings 7:51 - Inserts Assume Bushes Are Serviceable 8:03 - Wear Over Time 9:07 - Driver Feedback 9:24 - Thank You, James! 10:00 - The More You Know, The Faster You Go!

@patx35 11 ай бұрын

I find it amazing that a polyurethane bushing upgrade actually improves ride quality on some vehicles. It makes sense if you think about it. The inner sleeve in a poly bushing can freely rotate, almost like a ball joint. In contrast, rubber in an OE bushing is attached to the inner sleeve, which acts as an additional spring that can send road harshness directly to the chassis. As long as the vehicle doesn't use those weird off-axis bushings, a poly bushing upgrade would allow the suspension to move more freely, and send more road harshness directly to the shock and spring, which are the parts that are supposed to be absorbing road harshness.

@HellaNorCal916 11 ай бұрын

I've always be a big fan of poly bushings. Even in daily driven cars. You can't beat the road feel and predictable driving dynamics of a solid bushing.

@adri1leusha 10 ай бұрын

I've done nothing but bushings, suspension and sway bars and my car (also new wheels and tyres). The result is amazing, drivability is out of this world. I don't have reference laptimes or anything, buy I'm pretty sure I would gain more time on a technical circuit than a stock chassis with a turbo...

@someguy4576 11 ай бұрын

Funny how you guys uploaded this, I was just looking into upgrading to poly bushings. Thanks for these videos, all info and not the usual youtube fluff, loving them!

@hpa101 11 ай бұрын

Our pleasure! Pros and cons for everything but it's nice to have a bit of a middle ground option before you go for solid mounts etc which are great in the right application, but that is not in a vehicle that sees road use for decent lengths of time (as in driving for hours on the open road, not to a local 'hard park' on a Friday night) 😎 - Taz.

@newagetemplar6100 11 ай бұрын

These bushes do have their uses especially with different hardnesses plus they are easier to install and maintain. Just be aware that there are cheap nasty ones out there too . I did have a customer once that purchased a cheap 5 link kit for a MK1 escort against my recommendation. Less than a year later the ‘so called ‘ polyurethane bushes had gone hard and broke up literally leaving 10mm of play . Power flex have been going for decades and although i generally have no need for their products , they do use high grade polyurethane for their bushes therefore it would make sense to buy theirs / quality ones . Ideal for suspension, gearbox and diff mounts etc but polyurethane does melt if close to an exhaust manifold and is not sometimes suitable. I have seen several e36’s melt aftermarket engine mounts on the exhaust side. Any race car I build I personally go for natural rubber engine mounts and the same chassis mount setup as a proper gp4 escort / World Cup x member , a far better way . If you do go aftermarket engine mounts make sure they will stand the temperature. Fitted a few powerflex suspension bushes in the past and never had any issues so thumbs up from me 👍

@derekcable 11 ай бұрын

Years ago fitted poly bushes all round on a Mk2 16v Golf,drove like a go kart afterwards with no extra noise or vibration. On my present car I have poly inserts on the dog bone and gearbox mount with a bit of vibration on idle but not once the revs rise a bit.

@gordowg1wg145 11 ай бұрын

Old school trick was to tape the voids off and fill them with RTV or, for firmer results, a 2-part polymer mix. Of course, that was before the aftermarket started opening up one's options.

@spooler7828 11 ай бұрын

Just yanked mine out and install SPL spherical bearings in everything. I drove a car with them first and was quite impressed. Very little noise/vibration. Transmission or Diff bushing poly bushing 100%.

@jackweta 11 ай бұрын

When your pushing on track having the rear toeing out unpredictably is a pucka

@overdrive39 11 ай бұрын

The issue I have with Poly bushings are the life span is not liftime they degrade down to crumbs after a while.

@marc9283 11 ай бұрын

Good point with the inserts! I own a Fiesta ST and i see many people throw on Powerflex inserts on their engine mounts which are just broken. Many people dont understand how these work.

@ryanmalin 11 ай бұрын

i used to have poly bushings and engine mounts made from hockey pucks. NVH was a bit much but it handled great

@roadracing3 11 ай бұрын

Some production cars come with sealed rose joints/sphericals and it's a big step down to replace them with poly. Rose joints/sphericals are going to be a much better choice everywhere else if you want zero deflection and bind. I run away from poly except for anti roll bar mounts.

@sexyfacenation 11 ай бұрын

What cars are you talking about?

@roadracing3 11 ай бұрын

@@sexyfacenation Some suspension points on Gen5 and Gen6 Camaros use sealed rose joints. Using poly here is a step down when it comes to cornering perfection.

@injecttuning 11 ай бұрын

Great information

@PANTYEATR1 11 ай бұрын

Great video. I've always been a fan of polyurethane bushings. They sharpen a dull suspension💪

@slfrules1 11 ай бұрын

I've only used Energy Suspension poly bushings but i was surprised at how quickly they degrade. After 25k they were packed enough to fall out of their homes when i took the arms down. Second set pack in a little quicker and caught debris between the bushes and arms clearancing the aluminium. IMO Delrend

@gothicpagan.666 11 ай бұрын

Years gone by bushings for race cars were made from a phosphorous bronze type material with a grease point. This type of bushing or a spherical joint has a tendency to crack the chassis locally to the mounting points, it's the main cause of chassis failure, after driver error.🙂

@byloyuripka9624 11 ай бұрын

that seems like a hard dance, you can make an unbreakable car by attaching four wheels to a solid block of iron, but that weighs a bit id imagine. so you have to pare as much away as possible, soft bushings seems like a good solution

@gothicpagan.666 11 ай бұрын

@@byloyuripka9624 Yes in reality with a production based chassis, their are so many compromises that a tiny amount of suspension deflection isn't going to affect your lap times. With a single seater it's more critical, but then the average single seater driver is at a different level to a club level saloon pilot.

@guilhermeg345 11 ай бұрын

I've had powerflex bushes and still do, the dogbone mount for my car although they claimed no increased vibration, the engine vibrated at idle which was annoying, felt like a 20 year old car, everyone complained that my car was vibrating so it wasn't just me. I still use top strut mounts as they lower the car 10mm more and the rubber ones don't last 6 months due to it being lowered but yeah there's no miracles regarding nvh, you can feel everything even the crossing stripes. It also wear out the headlight projectors supports so now they vibrate at every road imperfection.

@hpa101 11 ай бұрын

Cheers for sharing your experience! Shame about the NVH expectations not being met with that particular application. What series did you go for? I think most people are happy to accept a bit more in the name of performance but it all depends on the expectations that are set right, noting how many different options there are too 😎 - Taz.

@guilhermeg345 11 ай бұрын

@@hpa101 I went for the normal purple series. On the dogbone mount was 70A (red) and the strut mounts 80A (purple).

@daneprostamo-brown6552 11 ай бұрын

Hey mate, decreasing the compliance with a stiffer poly bush will always increase the resonant frequency of a system assuming other variables are kept the same. If you increase your idle rpm slightly you may find the issue is resolved. An engine is always best operated above the resonant frequency of the combined system. This can often be observed by looking at a washing machine spin up. Usually it resonates at lower spin speed but stabilises above such resonant frequency. Also misfires can cause similar vibration problems because the car fires at lower frequency which approaches the engine mount and motor resonant frequency. 👍🏽

@guilhermeg345 11 ай бұрын

@@daneprostamo-brown6552 you're right but I didn't know better at the time and got carried by people's feedback. Powerflex themselves claimed no increased nvh, they don't mention that on their website anymore. I even checked the dogbone mount again and they changed the design a bit but I wouldn't risk again. I only remember the absolute nightmare it was to remove, one of the two pieces rotated due to the vibrations and I couldn't pull it out since it was bolted inside the subframe there was no space to fit more than a screwdriver. I had to melt it to take it out.

@richardclarke207 11 ай бұрын

I think the one thing people forget poly bushes vs oem rubber, is the rubber needs zero maintenance whatsoever, however poly defo needs maintenance, cleaning and lubricants are so important to how long the poly bush will last. Amount of customers that come with copper grease all over the bushes and moan about how rubbish they are…😅

@BjornFSE 11 ай бұрын

Interesting..... RE to Spherical bushings, Is there a way to Extend the Lifespan of them ? I've had Poly Bushings in the past that have worn down over time (no not Powerfex but other brand), Our Caribbean roads do tend to be aggressive on vehicles... this has left me to wonder if the stiffer poly bushes would be best for the rougher roads... but I will say steering response and handling definitely gets a huge improvement by going Poly.

@daanyl 11 ай бұрын

one of the best mods 👍especially if you got an older car. just changed all the balljoints and bushes on my type r and its amazing

@Takeitlightly6 11 ай бұрын

Ok ok ok stop because of these free sessions i am learning so much i hvent logged into class for many years.

@hpa101 11 ай бұрын

hahaha great problems to have right! 😂 An interview like this is a long way off a course, but we're glad to be in a position where we can do them and don't plan to stop any time soon (WTAC is a month away 😎) - Taz.

@mmusic142 10 ай бұрын

Do this bushings add stress to the chassis?

@bb1ben 11 ай бұрын

I have been warned that polyurathane does not deflect enough for some bushing locations and will tear and wear out extremely quickly, such as a lower inner control arm bushing on a double wishbone suspension since it deflects in 2 axis. Wonder if there is any truth to that. Havent had an issue with mine in that location yet

@guilhermeg345 11 ай бұрын

It depends on the durometer but yeah I've seen cracked control arms as the bushing doesn't deflect enough.

@baribari600 11 ай бұрын

With some cars like the FD RX-7, you can't just go willy-nilly and replace everything with urethane or plastic, since some of the OEM bushings aren't really bushings at all. Powerflex makes a few bushings for the FD that shouldn't be replaced with anything but spherical bushings or OEM / Mazdaspeed parts. Superflex doesn't make this mistake.

@TotoGeenen 10 ай бұрын

Can you elaborate further on this?

@baribari600 10 ай бұрын

@@TotoGeenen Some OEM bushings are actually spherical bearings covered in rubber. Changing these to urethane would cause the suspension to bind.

@tthams73 10 ай бұрын

OEM’s use rubber purely due to the initial ride quality. Road noise, vibrations…. Period. Poly is NOT going to cost an OE any more $$$ than rubber. Like you said; They order in the millions! They can pretty much name their price. In addition, in the demo example; the rubber bush is permanently bonded to the part. This is not required with poly which would actually lower costs.

@alundrasrt 11 ай бұрын

What is the maintenance of poly bushing, seems grease not tend to stick on those surface. Can I use lithium grease, wish is more viscous, please?

@hpa101 11 ай бұрын

They are supplied with PTFE/Silicone bush assembly grease otherwise Powerflex state their bushes are maintenance-free. We didn't have a chance to get into that in the interview, so might be worth asking them for some more information and feedback from others using them in the same manner you plan to on that front. Note the lifetime warranty doesn't apply to the motorsport-targeted products sadly, but there isn't much on a race car you expect to last forever either to be fair so not really a deal breaker for those with reason to look into poly bushes in the first place - Taz.

@alundrasrt 11 ай бұрын

@@hpa101 Thanks.

@frankpeutz9106 11 ай бұрын

I missed the maintenance topic in the presentation. my experience is that pu buses need regular maintenance (at least every 2 years for street use and every year for track use). I also have bad experience with the use of PU at engine and gearbox mounting points.

@bajkerjohnvolta 11 ай бұрын

Did someone have squeaking problems with Powerflex bushings. I really want to upgrade to poly, cause i am drive who notices every chage in suspension and it makes me mad. So please share ure experiences Thank you.

@ghostwrench2292 8 ай бұрын

I recently went full poly (Powerflex and SuperPro) on my suspension - control arms front and rear, swaybar bushings, steering rack bushing and rear upper shock mounts are all poly. To be fair, I also installed coilovers at the same time so I cannot completely credit the poly bushings for the transformation in how my car handles. My car, a Mini Cooper (R53) is known for go cart handling and I can say my car is extremely responsive in steering inputs and is an absolute pleasure to throw into corners. With regards to NVH, I do have some squeaks to track down but I suspect the rear upper shock mounts are the culprit because although I did grease them, I was a bit light on applying grease there compared to everywhere else. Other than that, I am very happy with my suspension now and I do think polyurethane bushings are a worthwhile modification.

@bajkerjohnvolta 8 ай бұрын

@@ghostwrench2292 wow. Thank you for repply :D

@woocash2139 11 ай бұрын

What about pu creep deformation?

@hpa101 11 ай бұрын

Not something we discussed sadly. Not sure if there is a study directly comparing PU creep to natural and synthetic rubber specifically. Maybe throw a link up if you find one otherwise that would be a great topic to bring up next time we visit any kind of bushing material comparisons for sure 😎 - Taz.

@user-nh8rr7oi6l 10 ай бұрын

Зачетное видео

@Remenschneider 11 ай бұрын

If you are talking bushings, you need to be talking elastokinematics! It's a huge part of the suspension setup of a stock vehicle.

@mm6705 11 ай бұрын

just an FYI do NOT use polyurethane for your bushings. They are not self lubricating, and will very shortly, if not immediately begin binding. They will still bind even with regular greasing via correctly installed grease fittings. You are supposed to use DELRIN or similar oil impregnated plastic that is self lubricating, and iirc stainless inner sleeves for a permanent solution. This will make all your car's joints very low resistance, as the delrin acts as a bearing. This is actually something that you will need to respring your car for, as the oem (or maybe you are replacing seized poly bushings) have quite a lot of built in resistance with reduce the spring rates needed on the corners. There are many ways to fuck this installation up, so be patient. Oh, and most cars don't have someone making the bushings as a kit, so you'll need to get them custom made. If you are driving a Miata...you are in luck! Someone makes kits!

@petereacmen716 11 ай бұрын

“Poly bushes are great” -Poly bush manufacturer. Poly has its place in some applications but most times it ends up being a downgrade IMO

@treeplusplus 11 ай бұрын

this channel is called high performance academy. Because poly bushes offer greater performance

@dreednlb 11 ай бұрын

"The Last Thing Many Thing Of"

@hpa101 11 ай бұрын

#allofthethings I don't know why, but that is a typo I make very often along with 'don't' instead of 'done'. In my defence, even Grammarly (which I often don't use but did this time) also missed that 😂 Thanks for pointing it out so I could fix it, appreciate it - Taz.

@flyonbyya 9 ай бұрын

Likely below is true… If I’m an enthusiast…poly yes If not….no

@jesvans 11 ай бұрын

bushes ? =

@hpa101 11 ай бұрын

Yep! Aka bushings 🌳 We draw the line at calling them shrubs, just FYI - Taz.

@gordowg1wg145 11 ай бұрын

Small trees for the bigger ones.

@cannaroe1213 11 ай бұрын

There's something going on with my suspension's shrubbery

@jesvans 11 ай бұрын

@@hpa101 well, the Brit's often call things different names than Americans*. so i didn't know if this was one of them. and, i was joking with you 🙂 *and they drive on the wrong side of the road, lol

@DavidLagendijk 10 ай бұрын

polyurethane is crap. It is just plain stupid to create friction in the mountingpoints of your suspension. Go spherical or leave Rubber in. The whole power flex hype is just marketing. It is cheap ass crap.

@ghostwrench2292 8 ай бұрын

My experience in installing polyurethane bushings is that friction is significantly reduced. Control arm bushings articulate on a steel sleeve within the polyurethane bushing. It allows the component to move easier in the direction it is supposed to move and at the same time it resists component movement in directions the component is not supposed to move which allows the suspension to do its job more effectively.

@DavidLagendijk 8 ай бұрын

@@ghostwrench2292 back to school.

@cannaroe1213 11 ай бұрын

The hardest part about getting poly bushes is finding all the right bush sizes AND the right durometer. You should always buy your new poly bushes all at once, from someone who knows what car they're going on. With all the model years its often harder than it sounds. Obviously you can go stiffer or softer from there peicemeal, but i've seen some friends DIY their bushes from day 1, as they transitioned from rubber, and their cars always sound like that autistic pinball piano machine video. EDIT: kzfaq.info/get/bejne/f9yFiJub1KjGYYU.html

@hpa101 11 ай бұрын

Still, has to be easier than building whatever the hell you call that machine you linked to. That's pretty wild, and super intriguing 😂 All at once is a great tip though, and yes sizing can be tricky until you have the part in your hand/can measure. Whenever there is any uncertainness between an A and B of something I haven't actually pulled off the car yet I just get both and return the one/s I don't need rather than pulling it off and then ordering while you're vehicle is immobile. Most part suppliers are 100% OK with you doing this unless something is an indent order, which is fair. Bit of a tangent sorry, happy Tuesday! - Taz.

@cannaroe1213 11 ай бұрын

@@hpa101 Not a tangent at all, that's absolutely spot on. Size-anxiety was an issue for me, VW T4 changed bush sizings the year my model was built from 35mm to 40mm, and best I could do was guesstimate the ID from the OD. If I'd just bought both i'd have finished the project a year earlier :D All the best mate