Why get the M12 Fuel Compact Bandsaw? (...instead of M18)

No video

Why get the M12 Fuel Compact Bandsaw? (...instead of M18)

Рет қаралды 3,626

Rusty Rock Woodcraft

Күн бұрын

Пікірлер: 16

@trevfindley5704 29 күн бұрын

Great review. I've been thinking about getting one of these, but am a little concerned about whether it would be hard to achieve a nice square cut with it being totally free hand. It's a shame none of these seem to have a simple cut-off stand attachment, however with the light weight of the tool, and the led shadow guide (which i wasn't aware of before watching this video) - i think it should be easy to get the knack of neat cuts. I just hope this isn't going to end up being a tool that punishes me for being left handed... 😂

@tomwilson5822 10 ай бұрын

You have just helped me make choice 👍

@rustyrockwoodcraft 10 ай бұрын

Glad I could help - it's a good tool for the use.

@Johnny-xy7en 6 ай бұрын

Very good demonstration

@rustyrockwoodcraft 5 ай бұрын

Thank you. I get more use from this saw then I thought I would. It's easy to grab for a quick cutoff of most anything in the shop.

@nathanielc7368 Ай бұрын

Mine doesn’t wanna turn the blade at all and it’s brand new

@PatricesProjects 6 ай бұрын

I wish i had need for a tool like that.

@rustyrockwoodcraft 6 ай бұрын

I didn't think I would use it as much as I do. It's nice to have a quick cutting option for anything that fits in the opening. Much easier than grabbing a hacksaw.

@onikwa 4 ай бұрын

Everyone online in recent years are complaining about the blades, how they are only good for a few cuts even in easy stuff like EMT, the weld snapping, blade teeth burning out, etc. How are your blades holding up?

@rustyrockwoodcraft 4 ай бұрын

I would agree, they aren't a durable as I'd hoped. I replaced one after about 30 cuts. I bought a 3 pack and so far, still have two left. I found that if you don't push the blade too hard through the material, it lasts longer.

@yungdro1972 8 ай бұрын

My next purchase. Nice demo. Like and sub.

@rustyrockwoodcraft 8 ай бұрын

Awesome! Thank you!

@davidsantos9715 5 ай бұрын

would this have the power to, with the proper blade, to cut lets say 3/4in or 1in black iron pipe?

@rustyrockwoodcraft 4 ай бұрын

I haven't tested that, but if I do, I'll post the result here. I've used it to cut 1/16th inch plate steel and thicker c-channel, but I have broken a blade by pushing it too hard.

@Wendy-Davis 9 ай бұрын

Have you cut threaded rod with it? I use an angle grinder with a cutting blade, but am looking for a better solution.

@rustyrockwoodcraft 9 ай бұрын

Yes I have. Also an 1/8" steel bar. Just let the saw do the work and don't push the blade. If it overheats, the weld seam on the blade won't last as long.