Why Is My Dishwasher Leaking?

No video

Why Is My Dishwasher Leaking? | PartSelect.com

Рет қаралды 57,045

PartSelect

Күн бұрын

Пікірлер: 18

@lc5346 Жыл бұрын

This was the most informative video on dishwasher leaks I have ever seen! Thank you!!

@JimBic72 3 жыл бұрын

Steve you are the best! Your methodical approach to diagnosing problems is second to none! I’ve solved many problems under the direction of Steve in KZfaq videos. Amazing!!!!

@LisaMaryification 3 жыл бұрын

The overwhelmed person in the thumbnail looks like me right now. I finally got a leak fixed in my pipes but now my dishwasher is leaking!

@christophe555 5 ай бұрын

Thank you-precise and to the point

@mrslavanderblu Жыл бұрын

Thanks for proving I need to just call the repairman. Ain’t nobody got time fo dat

@Hanfle9580 3 жыл бұрын

You are the best man. Gave me an idea why my dishwasher are leaking. Thank you.

@ClayFranklin 2 жыл бұрын

Thank you very clear lots of ideas

@dalemortensen1825 3 жыл бұрын

Good video, but missed the simplest of causes. Loose screws on the inside of the door.

@nubar5 3 жыл бұрын

Thank you so much for the video. I have diagnosed my issue to be the pump. I removed the motor and checked for any kinks or warn out pieces and found none. When i reconnect everything, the leak continues but it keeps leaking out of the motor itself. PLEASE HELP! i am not sure if i have to replace the entire pump/motor or just need to keep fishing for the problem. Its a 10 yr old Frigidaire Gallery Dishwasher - i saw your other video about the common issues and you nailed my problem. Just cant figure out how to fix it or what to replace before i spend more $ than a new dishwasher. thanks again for your hard work

@jelsol 3 жыл бұрын

Could you elaborate on the float switch assembly please? @ 3:20 "If you verify that the float rises and lowers without any restrictions, you may have a defective float switch..." and @ 3:39 "If the float does not move freely, you'll need to replace the complete float assembly..." So should the float assembly move freely (i.e., without any restrictions) or not?

@joelsch8627 3 жыл бұрын

i noted that too... did u get a reply?

@jshariff786 3 жыл бұрын

@@joelsch8627 I think the idea here is that the water filling the tub makes the plastic portion float upward until the switch is tripped, shutting off the water at a specific water level. If the thing can't rise freely, the switch will never get tripped, and the water won't get turned off. So yes, it should be able to move upward without obstructions. When I push mine upward, I can actually hear the switch being pressed.

@joelsch8627 3 жыл бұрын

@@jshariff786 i just checked again and my plastic round piece is loosse and just slides up freely til it reaches the stop. i do not hear, nor able to feel any kind of a switch being pressed.. hmmm

@bwp.bobsworldpodcastpodcas4844 5 жыл бұрын

Good video

@mikekim5837 2 жыл бұрын

My whirlpool dishwasher leaks at lower right corner and at float after DW running for about half hour. I changed the float switch but DW still leak. At this moment I put two chopping boards between the door and lower rack, the leaking stops for now. I am going to bring GoPro to check. My assumption is the lower spray arm or lower seal might be not good. How do you think?

@regenerativehomesteadwiths2869 2 жыл бұрын

I have whirlpool leaking. Did you discover what the problem was?