✨ DISHWASHER LEAK UNDERNEATH

No video

✨ DISHWASHER LEAK UNDERNEATH - SIMPLE FIX ✨

Рет қаралды 98,034

Scott The Fix-It Guy - Appliance Repair Videos

Күн бұрын

✨ DISHWASHER LEAK UNDERNEATH - SIMPLE FIX ✨
QUICK AND EASY APPLIANCE DIY REPAIR VIDEOS - SAVE BIG $$$ BY FIXING IT YOURSELF✅
CLICK HERE TO ORDER A NEW 10.00 SEAL: amzn.to/3nau8cg
✨ If the video was helpful, remember to give it a Thumbs Up 👍 and consider Subscribing. New videos every Saturday ✨
-Subscribe Here: / @scottthefixitguychannel
🛠- Do You Need Any Additional Help? Become A Member of Our Channel Today and Get LIVE HELP from Scott With Your Appliance Repair. Pick #1 FIX-IT FAN for Just $4.99 and get Text, Zoom, Email or FaceTime Live Help. Non-Members pay $45.00 for Live Help. Just $4.99 for Channel Members. Click Here to Join Today: / @scottthefixitguychannel
-Facebook: / scottthefixitguy
-Twitter: / scottthefixitgy
-Instagram: / scottthefixitguy
-KZfaq Channel: / scottthefixitguychannel
-If My Advice Has Helped You…
Please Click Here To Donate: www.paypal.com...
Donate with Venmo - Click Here:venmo/u/Scott-Flint-1
-GREAT PLACE TO ORDER O.E.M. Genuine Parts for Your Appliance - Click Here: fix.pxf.io/MmrxYY
-Need Expert Appliance Repair Help Today? Click Here:asqme.com/@sco...
-Good Place to Buy Parts: bit.ly/3wD4L5W
-List of Tools used by Scottthefixitguy: • ✨ Scott The Fix-It Guy...
-Need More Expert Help with Your Repair? Click Here To Schedule a 15 Minute Meeting with Me Using Zoom 💻 : calendly.com/s...
Disclaimer:
Because factors beyond the control of Scottthefixitguy, I cannot guarantee against improper use or unauthorized modifications of this information. Scottthefixitguy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Scottthefixitguy recommends safe practices when working on appliances and vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Scottthefixitguy, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Scottthefixitguy.
Thank you 😊
PLEASE HELP TO KEEP THIS SERVICE GOING - THANKS SO MUCH😀
www.paypal.com...
Donate with Venmo - Click Here:venmo/u/Scott-Flint-1
CLICK HERE FOR GREAT DEALS ON APPLIANCE PARTS: bit.ly/3wD4L5W
USE THIS CODE TO GET 10% OFF : M5PV3CLC2X
Please CLICK Here To SUBSCRIBE: / @scottthefixitguychannel
Join Our Channel To Get Access To Perks:😊
/ @scottthefixitguychannel
Check Out Scott’s over 600 Appliance Repair Videos At Our 2nd CHANNEL:
/ @quickandeasy5minuteap...
CHECK OUT OUR NEWEST APPLIANCE REPAIR CHANNEL BY CLICKING HERE: / @fastfreefixes
CLICK HERE TO SEE OUR NEW TESLA 🚘⚡️ CHANNEL:
/ @teslamodel3newowners
NEED MORE EXPERT HELP WITH YOUR REPAIR? CLICK HERE TO SCHEDULE A 30 MINUTE MEETING WITH ME USING FaceTime📲 OR Phone Call☎️ OR Zoom💻 Meeting: calendly.com/s... .
.
CLICK HERE FOR GREAT DEALS ON APPLIANCE PARTS: bit.ly/3wD4L5W
USE THIS CODE TO GET 10% OFF : M5PV3CLC2X .
.
DISCLAIMER: This video or description may contain Amazon affiliate links, which means that if you click on one of the product links and buy the product, I’ll receive a small commission. Thank you for supporting this channel.
Scott The Fix-It Guy *
*
🐔 Check Out Our New Channel Dedicated To Showing How To Raise Your Own Backyard Chickens: / @raisingbackyardchickens ***
***
Scott The Fix-It Guy - Appliance Repair Videos Do you need More Appliance Repair Direct Help from Me? Visit me at:AsqMe.com@ScottTheFixItGu and I'll help you get your appliance working again quickly.

Пікірлер: 127

@user-tj1vp1dk2o 6 ай бұрын

Thank you for the informative video. I thought the dishwasher pan failed, but was the inverter motor grommet. It cost me $7 instead of $700 for a new dishwasher.

@ScottTheFixItGuyChannel 6 ай бұрын

Wow, Great job😊

@chugnuggie8534 3 жыл бұрын

This video and another video of yours saved my dishwasher, twice. The repair guy asked me about 400 for fixing it, my husband said we can buy another one when we have money but I don't want to wash dishes between now and then since everyday I spend almost an hour washing dishes so I decided to fix myself. It's my first time try to fix the DW but because of your great video I was able to fix the leaking problem. I could not get the old gasket off no matter how hard I tried so I just put the new one on top of it and I was able to put the part back and it worked!!! A week later the DW has no water coming in and I did the research, this time I fixed the problem again through your video and I cannot tell you how much I appreciate your help.

@ScottTheFixItGuyChannel 3 жыл бұрын

That is so cool, Thanks so much for your feedback and I’m very proud of you being able to fix it yourself

@chrismemelo4819 3 жыл бұрын

I had a leak for six months but it want enough to investigate until recently. I found your video, ordered from Amazon and just completed the repair. No more leaks! Thank you for providing excellent directions! One note, I did not need to remove the upper spray assembly and was still able to complete access to the grommet.

@davidhirsch4976 2 жыл бұрын

My model is a KDFE104HPS0. This was exactly my issue. Bought the grommet at Amazon. Also bought hook tool at Home Depot. You definitely need the hook tool. I am really glad I followed your instructions completely. It took about 10 minutes and cost (grommet and hook tool set) $17. A service call which I scheduled was $135 excluding any parts. This is a winner! Thanks so much!!!

@ScottTheFixItGuyChannel 2 жыл бұрын

Wow, That is awesome David😊😊😊

@summerc.5369 2 жыл бұрын

Another grateful viewer here! Between yours and Nutty Cool's video, we were able to fix this problem for around $20, including getting the right tool. We thought we were going to have to replace our six-year-old dishwasher. Luckily we found the leak early and our hard wood floor only sustained minimal damage.

@ScottTheFixItGuyChannel 2 жыл бұрын

Nicely done😊😊😊

@elizabethdiaz7137 3 жыл бұрын

Yes! I fixed my dishwasher by following this video!! The comments were very helpful. My old seal was stuck too and carefully separating it from its seat with a blade and then using needles nose pliers to remove it worked. No more leak! Thank you!

@ScottTheFixItGuyChannel 3 жыл бұрын

Nice job Elizabeth 😊

@joecabaleiro9867 2 жыл бұрын

Thank you for a great video! Fixed my problem. A couple of thoughts/ideas. On another site, I they recommended using silcone grease, supposed to make the washer last longer. Also, I live in a neighborhood where lots of these dishwashers are installed. Our next door neighbor had this leak but did not notice it until it damaged their floor. They had to replace entire first floor of their home since could not find matching wood any more - this leak cost them tens of thouhsands! As a result, I installed a water sensor under ours, and it detected the leak almost immediately. No damage for us. I highly recommend installing a water sensor before you have this problem, ours saved us!

@ScottTheFixItGuyChannel 2 жыл бұрын

Great ideas, Thanks for the info.

@pennhigh6863 2 жыл бұрын

Perfect. I had Sears tech come to house for $145 only to tell me I had to buy an entire new pump for $600 b/c they weren't allowed to replace the washer. The tech said they weren't even able to order "just the washer". What? So I did exactly what this video recommended. Bought the washer for 10 bucks off Amazon as well as a hook tool set for 7 bucks. Took me a little fiddling around to take everything apart but was super simple once I got everything apart. Replaced the washer, snapped everything back into place and ran the washer and ZERO LEAKAGE. Thank you for taking the time to film this repair. 17 dollars never better spent!

@ScottTheFixItGuyChannel 2 жыл бұрын

That is very impressive 😊😊😊😊

@infoman111 Жыл бұрын

I'm yet another grateful "customer." Luckily, my dishwasher is exactly the same inside as yours in the video. Every step and all the advice worked exactly as you laid out. I ordered the same little grommet as you did and it fit perfectly. I took the advice of an earlier comment here about using a little rinse aid on the grommet as a lubricant and it popped right in place. Because all the parts involved are plastic, I was hesitant to pull or twist them too hard at first, especially as my dishwasher is now 6 years old and has had constant use. I was afraid that the plastic had become brittle from the water and heat over time. But I followed your instructions on using a flat-head screwdriver to gently push open the clamps. Thanks so much for helping me save hundreds of dollars in repairs.

@ScottTheFixItGuyChannel Жыл бұрын

I love it, thanks so Much for the update😊

@kenmartin1240 4 жыл бұрын

Thanks. Like the previous comment the grommet/washer came apart during extraction. The seal has a tiny spring shape into a hoop embedded in the neoprene(?). There is also a thin metal strip around the perimeter covered by the neoprene. If after washer extraction you see metal lining the recess you’ve nor extracted the entire seal. The new one will not slide into place. All that should be visible is the uniform plastic surface of the rest of the housing. It took some work to get a grip on the metal to pull it out. What finally worked was a very small blade inserted between the metal and the housing wall. I was then able to grasp with some fine needle nose pliers and remove. Cleaned out the recess and the rest was as advertised.

@STEVE-ow5ki Жыл бұрын

Your video saved me the cost and inconvenience or a service call. Thank you!

@ScottTheFixItGuyChannel Жыл бұрын

Thanks Steve, You’re welcome 😊

@alexanderhreyes 2 жыл бұрын

I have a Kitchen-aid DKTM354DSS1. I tried replacing the door gaskets in vain. Then, I found your video and it looked exactly like my problem. Your fix was spot on! I bought the parts from Amazon (using the number on your video). Just want to say THANK YOU. You probably saved me $100's from calling a plumber. I spent

@ScottTheFixItGuyChannel 2 жыл бұрын

I’m very proud of you Alexander😊😊😊

@Carlita819 Жыл бұрын

Great video, thanks so much. Changed the gommet, added teflon around the white plastic and no more leak after 1 year of washing dishes by hand 😂❤👌

@ScottTheFixItGuyChannel Жыл бұрын

Great job Carla❤️😊👍

@aminastevens529 10 ай бұрын

Thank you for asking. I apologize for not letting you know the final outcome. I called in a well-recommended handyman. The new gasket around the door was put in backwords. He turned it around, encouraged me to use the dishwasher a few times during the week. It never leaked again!

@ScottTheFixItGuyChannel 10 ай бұрын

Excellent News👍😊

@blairhiggs9988 Жыл бұрын

This was exactly my issue. Thank you this saved me a lot of money

@ScottTheFixItGuyChannel Жыл бұрын

Thank’s So Much, I’m so glad it worked and saved you time and money😊 I hope you’ll click here to support us by joining our Channel: kzfaq.info/love/7fBqy8806u1r0NpPv_fQ2wjoin You’ll get Live Appliance help when ever you need it. It’s just $5.00

@calvin2516 2 жыл бұрын

You just saved me hundreds of dollars. Thank you.

@afveteran 4 жыл бұрын

Scott, Thanks for the instruction regarding the grommet. My dishwasher isn't 3 years old yet and started leaking gradually over the last 2 months. Now it's happening once a week or so .

@ScottTheFixItGuyChannel 4 жыл бұрын

That’s pretty early. Time for a new grommet.

@afveteran 4 жыл бұрын

@@ScottTheFixItGuyChannel It's just myself, once a week.. I did notice the lower right L would move and that would be a cause of the leak on that side. I ran my finger along the bottom the door and it was wet. I don't want to call a technician yet. It's only happen during that previous mentioned time frame. Thanks for getting back to me Scott.

@davidmichalski7638 Ай бұрын

Thank you!

@ScottTheFixItGuyChannel Ай бұрын

You're welcome!

@bitromp 3 жыл бұрын

Super video! I applauded for $5.00 👏👏

@ScottTheFixItGuyChannel 3 жыл бұрын

Thanks so much😊

@joecaptain3 4 жыл бұрын

Another satisfied customer here. Nice video

@ScottTheFixItGuyChannel 4 жыл бұрын

Excellent , thank you

@samchan8712 2 жыл бұрын

Thanks for the video! Helped a lot. One bit of suggestion... I had to coat the seal with some silicone grease in order to stop the leak completely... without the grease, there were still some small drops and dripping coming through.

@ScottTheFixItGuyChannel 2 жыл бұрын

Good idea Sam👍

@alifournier7742 3 жыл бұрын

you probably just saved me a $500 service call, thank you!!

@Rosepetals116 3 жыл бұрын

Thank so much for this video. I was able to fix my dishwasher myself. Thanks again👍

@ScottTheFixItGuyChannel 3 жыл бұрын

Nice job Rose😊

@bobthebuilder1106 7 ай бұрын

Super helpful video. Just like you I needed to remove the conduit to the upper sprayer in order to access the bad grommet. But unlike your case when I pulled in the old grommet, it piecemealed into a bunch of fragments. After a lot of digging around finally got all the fragments out and installed the new grommet. I did reuse the circular metal spring in the new grommet. I notice that you did not

@az34349 3 жыл бұрын

Super video! I applauded for $10.00 👏👏👏

@ScottTheFixItGuyChannel 3 жыл бұрын

Thanks so much Arthur😊😊😊

@jimkern7922 2 жыл бұрын

I thought I'd try the cheapest and easiest fix first and a new grommet fixed the leak. I bought a replacement grommet from eBay and was kind of surprised that it wasn't softer then the one I replaced. It's a hard rubber and not soft and pliable. The grommet might be as old as the dishwasher, but it stopped the leak for now. One issue I had was that I removed both racks to allow more working room. When I tested it for the first time I didn't replace the racks and water gushed out at the lower edge of the front door. Put top rack in and it didn't leak. I don't know why this is this way, all I know is that it's true. I noticed you left the racks in place and worked around them. I should have taken the hint. Thanks again.

@ScottTheFixItGuyChannel 2 жыл бұрын

Nice job Jim😊👍

@shandusa 3 жыл бұрын

Excellent video. Wander why didn’t you just remove the upper drawer/tray to ease the access to the diverter? Thanks

@ScottTheFixItGuyChannel 3 жыл бұрын

That’s a good idea👍

@hectormeza9533 3 жыл бұрын

Thanks for sharing your video make are job easier because I was about to pull the dishwasher out. Thanks again

@ScottTheFixItGuyChannel 3 жыл бұрын

Nice job Hector

@Flingwing 3 жыл бұрын

Pretty good video. It gave me the tips I needed to complete this simple but needed fix. Keep up the good work, I'll be looking for your vids if any of my other appliances die.

@ScottTheFixItGuyChannel 3 жыл бұрын

Thanks Paul👍

@nicholasp.9241 3 жыл бұрын

Awesome video ! very well done, great job of explaining step by step thank you.

@ScottTheFixItGuyChannel 3 жыл бұрын

Thanks so much😊

@anthonynoel763 4 жыл бұрын

Great help. The seal is $10 and the part is no longer available from the parts supplier. Two points. One, the old grommet was disintegrating so I removed it in pieces. Two, the new grommet is slightly larger making the cover seal tighter. Initially there was a clicking noise until diverter seated properly. Thanks again.

@ScottTheFixItGuyChannel 4 жыл бұрын

Great, thank you

@rachelgarraway5511 2 жыл бұрын

thank you! got it done watching your video!!

@ScottTheFixItGuyChannel 2 жыл бұрын

Nice job Rachel😊

@russmitchell9065 11 ай бұрын

Loved your video and did As explained and replaced the grommet but it is still leaking ... any suggestions?

@ScottTheFixItGuyChannel 11 ай бұрын

Thanks so much Russ, can you try the same procedure but try with a new seal but install it upside down as compared to last seal👍

@Katie26VT 2 жыл бұрын

How do you loosen the clips in the back? I cannot see in the video as the camera points away.

@Simonl77 Жыл бұрын

Hi Scott, very awesome video! I have a question and was wondering if you are able to answer. I noticed the seal you ordered from Amazon didn’t seem to have the inner spring like the original seal had. I saw it on your kitchen counter top. Now did you install the original spring back or if it necessary to even have the spring? Thank you

@ScottTheFixItGuyChannel Жыл бұрын

Can you send that same question to my email at: scottthefixitguy@yahoo.com

@MikeyMac99 Жыл бұрын

Wondering the same thing, as I replaced both my seal and diverter motor and still have a leak. I lost my spring so was wondering if it was necessary as well?

@fosarvian 4 жыл бұрын

I did this repair today. First things first, I tried prying out the grommet using a screw driver...it didn't budge. Went and got the pick tool and it worked like a charm. Second, when I pried out the grommet with the pick tool, the grommet jumped out and fell into the hole at the bottom. I tried fishing it out with the pry tool and then with my finger but it kept getting away from me. This led me to curse, yell and get really upset. I took some time off and realized that the hole it fell into shoots water out to feed the sprayer arms etc. With the sprayer arm and white rotating disk thing off, I turned the machine on until the pump started, opened the dishwasher door and, as expected, the lost grommet had shot out and was resting on one of the heat coils. If you lose the grommet down the hole, do the same thing and don't get upset thinking you'll have the take the machine out to fish it out.

@ScottTheFixItGuyChannel 4 жыл бұрын

Good ifea😂👍

@franciscojaque253 5 жыл бұрын

I enjoy your videos sir!

@ScottTheFixItGuyChannel 5 жыл бұрын

Thanks so much👍😊

@patthomas3399 Жыл бұрын

Q: There was an "O RING" on top of the grommet. See it setting on top of your countertop. Should it be placed on top of the grommet?

@ScottTheFixItGuyChannel Жыл бұрын

You should just put in the new grommet 👍

@Trrrarwtagggageve 4 жыл бұрын

thank you so much for the helpful video

@ScottTheFixItGuyChannel 4 жыл бұрын

You’re welcome 😊

@johncomune5824 5 жыл бұрын

Thanks, this really helpful. When i was removing the grommet a tiny circular spring popped out of somewhere. Do you know where that goes? I noticed it on the counter top in your video, but you didn't mention it.

@An2oine 4 жыл бұрын

It is part of the grommet.

@kcdias9710 3 жыл бұрын

You replied that the spring is part of the grommet, does that mean it is something I should put back into the new grommet or are you saying it is a piece included inside of the new grommet?

@SquatThrust 3 жыл бұрын

Hi. I replaced the grommet as you showed and my leak was fixed. However, since then I hear clicks when the dishwasher runs and it doesn't clean dishes very well. I am wondering if the grommet is too tight (or too deeply seated) and preventing the diverter from spinning the way it should? Should I have greased the grommet and shaft, or maybe used something like WD-40? Excellent video BTW.

@aminastevens529 2 жыл бұрын

Hi Scott. Amina again. I found a youtube showing me how to remove the lower spray arm. The housing under this is a bit different from that in your video. I'll keep working at it. 74 and still going . . .

@ScottTheFixItGuyChannel 2 жыл бұрын

Nice job Amina, did that work?

@aminastevens529 2 жыл бұрын

@@ScottTheFixItGuyChannel Hi Scott. Saw that the leak was coming from the right and left sides of the door rather than underneath. Replaced the door/seal gasket and the plastic gasket for the bottom of the door. A friend made sure the dishwasher was level. Checked the screws on the door to make sure they are tight. Still leaking right and left. I'm flummoxed! Not sure what to do next.

@scottflint7297 2 жыл бұрын

It might be over filling. How high does the water get when it fills?

@aminastevens529 2 жыл бұрын

@@scottflint7297 Hi Scott. The water seems to be collecting in the back of the dishwasher. The machine seems level and the water still leaks from the front.

@scottflint7297 2 жыл бұрын

I think you have a leaky fill valve. It’s letting too much water come in and that’s why it leaks past the seal. Pretty easy to replace. They cost about 30.00.

@mikes51501 Жыл бұрын

Wow, that worked 🤣. I was about to just buy a new dishwasher

@ScottTheFixItGuyChannel Жыл бұрын

Thanks so much Mike😊👍

@user-dl7ji5pr8w 6 ай бұрын

Worked as shown and fixed the leak. However, dropped the socket and it disappeared down into the diverter. Cannot feel it anymore. What issues is this going to cause? How can I get out if needed? Thanks…

@ScottTheFixItGuyChannel 6 ай бұрын

I wonder if you can remove the diverter motor from underneath the dishwasher to get it out?

@pulhey67 3 жыл бұрын

Thanks much

@ScottTheFixItGuyChannel 3 жыл бұрын

You’re welcome👍

@wandameyer5749 Жыл бұрын

As soon as I hook it up to faucet and turn on water it runs out,I dont have it turned on yet just door is closed and locked,just started that after our hard freeze,

@michaelclark6154 2 жыл бұрын

So I replaced my diverter seal and the leak to my dishwasher is now worse. Could it be the diverter motor itself that is faulty?

@ScottTheFixItGuyChannel 2 жыл бұрын

Yikes, Might be good to do it again with a new seal.

@easyhomeschool9031 3 жыл бұрын

Hey Scott! How do I know if this particular seal is what's causing my leak? Sorry if you said that and I missed it...

@ScottTheFixItGuyChannel 3 жыл бұрын

It’s highly likely✨

@pragneshprajapati273 3 жыл бұрын

where to purchase the seal from and thanks for good video.

@michaeldecheser9343 3 жыл бұрын

It seems as though you did not install the metal ring that goes inside the grommet?

@ScottTheFixItGuyChannel 3 жыл бұрын

Hi Michael, That metal ring is part of the old seal and should be removed. The new seal comes with its own metal ring to help expand the seal outwardly.

@rasimamemic1182 3 жыл бұрын

@@ScottTheFixItGuyChannel My old metal ring won’t come out.Where can I buy that hook that you used to take old grommet out.Thanks

@aminastevens529 2 жыл бұрын

Hi Scott. I'm having difficulty removing the lower spray arm from the dishwasher. Pulling up doesn't seem to release it. Its model number KUDC10FXSS5. I called Kitchen Aid and they won't give out that information. Many thanks!

@dtoad5576 10 ай бұрын

What did you end up doing?

@markcarolethompson9459 2 жыл бұрын

At 3:31 there's a metal circular spring next to the new grommet. Where does that go?

@ScottTheFixItGuyChannel 2 жыл бұрын

That’s from the old seal. You need to pull that out before installing the new one.

@sullyprudhomme 3 жыл бұрын

saved me a massive repair bill

@ScottTheFixItGuyChannel 3 жыл бұрын

Excellent, thanks David😊

@learnwithdinosaurs-funscie911 2 жыл бұрын

Do you think it’s coming from the edges of the door?

@Tony_Banana777 5 жыл бұрын

That is what I've done, I replaced the rubber seal, but it is still leaking. And it only stopped after I replaced the deverter motor as well.

@ScottTheFixItGuyChannel 5 жыл бұрын

Very good, Thanks Anton

@paulmuri 3 жыл бұрын

Thanks for letting me know. I might have to do the same

@michaeldecheser9343 3 жыл бұрын

Mine seems to be leaking above where the grommet seats. So, its not the grommet. Water is getting in between the top of the metal rod (that spins) and the stationary plastic rod that contains the metal. Hence, replacement of the entire diverter. I guess it wears out in there. I do have a question as to where to buy the metal clip that sits in the grommet?

@Quintanaroo2117 3 жыл бұрын

Mines leaking when the dishwasher is off. 🤔

@ScottTheFixItGuyChannel 3 жыл бұрын

Hi John, You most likely have a fill valve that is not fully closing when the machine is off allowing some water to leak through. I would replace the fill valve to cure the problem.

@JW-iz6mv Жыл бұрын

My KitchenAid dishwasher started leaking.... Appliance store repairman told me I needed a new $400 motor???

@ScottTheFixItGuyChannel Жыл бұрын

You can just replace the seal in the video for 10.00 and save 390.00👍

@JW-iz6mv Жыл бұрын

@@ScottTheFixItGuyChannel I did not understand how he could determine if I needed a whole motor assembly in less than 5 minutes

@FastFreeFixes Жыл бұрын

Yep, I bet the motor is fine. Just needs that new seal👍

@JW-iz6mv Жыл бұрын

@@FastFreeFixes Yes,but is that seal even available separately for the kitchen aid model KDTE204GPS0 ? I heard the only way you could get a seal was to buy a aftermarket seal their quality was so-so

@FastFreeFixes Жыл бұрын

The aftermarket seal shown in the description is good👍