WHY Polymaker is the BEST 3D printing filament company?
Рет қаралды 41,755
Күн бұрынPolymaker is the OFFICIAL sponsor of our content and the most amazing 3D printer filament company on the planet! This is a little behind the scenes chat on how and why I chose Polymaker to sponsor our 3D printing content.
Some of the links below may be affiliate links where we may be compensated for your using them! Thank you for your support!
Polymaker
loyal.ms/polymaker (aff)
LM Sparkle Green
loyal.ms/LMSparkleGreen
LM Discord
loyal.ms/discord
Polymaker Discord
discord.polymaker.com
#3dprinting #3dprinter #polymaker
@Polymaker 6 ай бұрын
WHY the LM Show is the BEST 3d printing show? ;) First of all, Loyal is an incredibly creative and talented content creator. Starting with a dream a few years back of making 3d printing fun for everyone, he built an incredible show which is now followed by thousands of people seeking for fun, exciting, engaging and educative content. Supporting by his team (family) and through his hard work (literally day and night) Loyal has achieved an important objective which align with Polymaker's: Bring 3D printing to mainstream. And it doesn't stop there the synergy we have built with the LM Show allowed the development of an incredible community willing to support each other, welcome new comers and use 3D printing technology to bring fun and happiness to the world and make it a better place. The special and growing synergy between companies, creators and the community is what makes our industry special and unique.
@asaraphym802 6 ай бұрын
I love Polymaker filament! Always recommend it to all my friends....also much love!! the LM show as well! its always my go to 3d Channel
@genemaster74 6 ай бұрын
i have heard Polymaker from other U.S. based KZfaqrs and they rave about it, but i live in Australia and its hard to find! And when you do, its 1 of this 2 of that and a home loan to buy it. Thats been my experience in the last few yrs here downunder. So its no-name stuff for me, our isolation makes this hobby hard sometimes. But hope to try some one day . Cheers from A M8 Downunder. p.s. my 50th on the 4th of jan and i hope for another 50🤔
@jonny445boy 5 ай бұрын
your marble PLA is absolutely my favorite for statues!!!!!!!!!
@jessicaalvis7063 16 күн бұрын
Do you also sell to the european market? I want to try this :D
@brandondick52 6 ай бұрын
As an engineer I love that polymaker has good data on the properties of every filament they make. Their material comparison tool makes it incredibly easy to choose the right filament for functional parts
@LoyalMoses 6 ай бұрын
Yes! That is one of the most attractive aspects of their business!
@xilni_yt 6 ай бұрын
I agree, I wish they'd go ahead and add profiles for Prusa Slicer to their downloads page.
@datatodatatodata 4 ай бұрын
We use their filament at work. I've been reverse engineering and then refining parts for a few years now and thanks to the material data I was able to put one of my managers at east with that I do for a part I've recently resigned.
@perniculous 4 ай бұрын
I see these channels where people have tons of filament just on the shelf. Makes me think of how some people are like “you gotta dry pla for 24 hrs” and the other who are like “I store my pla in the pool out back.”
@LoyalMoses 4 ай бұрын
Hahaha! It’s true, so much misinformation and blame on things that aren’t true.
@perniculous 4 ай бұрын
I'm pretty new, so I'm trying to wade through the information scattered about. My first lesson: do my best to ignore the freakin' jerkbags found on the FB and reddit groups! @@LoyalMoses
@damaylaphoenix1155 2 ай бұрын
im new to 3d printing, are you saying you don't have to dry Pla before printing? what about petg?
@CaptainVVV Ай бұрын
@@damaylaphoenix1155 Ask 1000 people and you'll get 1000 responses, so here's my personal experience which may not match 999 other people's experiences. I have a lot of PLA and PLA+ from dozens of different brands. I have NEVER dried PLA filament, and it all prints flawlessly on a dozen different machines. The spool I'm printing this very second has been opened for at least 2 years, and it's humid where I am. The only problems I've had when printing PLA were due to user error. In other words, me, I messed something up. (Also I once got some whack no-name-brand filament which didn't print. All name brand filaments print well, don't get unbranded stuff off Temu or Wish.) HOWEVER, that's talking about PLA. When talking about PETG, I still have never dried any of it, but I will admit that fresh PETG prints better. So do you NEED to dry it? No, you can print it either way, but a dry spool will definitely print more cleanly. If you're going to use the spool over the course of a few days you'll be fine, it doesn't absorb water that quickly. TPU absorbs water fast. You can print a fresh spool fine but if you're storing it for more than a day it needs to be in a vacuum sealed bag with desiccant, or you'll need to run it through a dryer if you don't. PA (Nylon) is the final boss, this stuff absorbs water faster than you can get it off the spool. If you live it a dry climate you'll probably be fine, if you live in a humid environment you'll need to run it straight from a filament dryer into the printer. TLDR: PLA no drying needed ever, PETG drying not needed but it'll help your prints, TPU drying/storing recommended, PA Drying absolutely required
@TheOtherPlayer 14 күн бұрын
@@damaylaphoenix1155PLA is not very hygroscopic, PETG is a bit more sensitive to moisture as it is more hygroscopic, so moisture in the filament will cause blobs and with PETG being stickier it can cause compounding issues.
@lacroserocks 6 ай бұрын
Waiting for the government mandated addiction warnings on filament lol
@LoyalMoses 6 ай бұрын
haha! So true!
@worshaw 6 ай бұрын
@@LoyalMosessince we are talking about warnings and such, what do you do to maintain air quality in your printing area? It would be great to get a manufacturers input on that as well.
@86Carrera911 6 ай бұрын
I had never used Polymaker prior to winning a spool of it from your show. Since then, I think I've won 3 or 4 more times, and I've purchased more than 30 spools. It's basically become the one I use, unless they don't have the color I'm looking for. Thanks for turning me onto them!!
@LoyalMoses 6 ай бұрын
Hey!!! Thank you for this comment! I really appreciate it. It feel so good.
@TweadyYT 6 ай бұрын
@@LoyalMoses When comes the review to the Artillery Sidewinder X4? :D
@stevehorvat69 6 ай бұрын
Glad I found your channel. Your info is great. My first printer, the Bambu A1 is arriving any day now. Wasn’t sure on which filament to buy first and was actually going to try some of Bambu’s. Will definitely give this a try. Thanks.
@LoyalMoses 6 ай бұрын
How exciting and thank you! Congratulations, you will LOVE IT!
@Walt1119 6 ай бұрын
Great video and great story!!! Thanks so much for sharing with us!! I do use Polymaker also...
@LoyalMoses 6 ай бұрын
Thank you! I really wanted to share this outside of our Twitch show. Polymaker is an amazing company and more people need to know.
@tonbarcinas6341 3 ай бұрын
Thanks to your KZfaq video, we just found a cost effective means of ordering fillament. We are now big fans!
@LoyalMoses 3 ай бұрын
Great to hear!
@clane3211 4 ай бұрын
Thank you for the video. I'm very happy that I come across this channel. I'm new to 3d printing and was trying to figure out what filament would be good to use. I'm a fan of any company that great and responsive customer service. I'm going to start buying Polymaker.
@LoyalMoses 2 ай бұрын
Thank you!
@deanaduffey1260 6 ай бұрын
I absolutely love Polymaker PLA Pro. It is the only one I buy, just got a 5kg roll. Prints like a dream. I did not know you did a Halloween drive too, I am excited to do the Xmas drive this year. I will have to go search past Halloween drives. Love your channel!!!!
@LoyalMoses 6 ай бұрын
Fantastic! And thank you so much! Can't wait for us to start the next print drive!
@delsbro 6 ай бұрын
I have won a couple spools of Polymaker from LM! And have now bought alot more! Its so easy to print with, and prints consistently! Plus LM has a great show! Definitely someone I would love to meet someday!
@LoyalMoses 6 ай бұрын
Congratulations! Thank you for the kind words!
@billstauver5927 2 ай бұрын
Just started 3D printing a couple months ago. I started with a cheap Ender 3 I bought on Amazon, but it was a bit noisy and very slow. I decided to pull the trigger on a passive upgrade and got the Bambu Labs P1S. I have been trough about a dozen different filaments, some of which had breaks etc. Some of which I was never able to give a fair shot because I didn't know about keeping your filament sealed and would open every roll because it looked awesome. Having learned so much in a couple months I have found this channel to be a HUGE help. My filament addiction has grown and still looks cool stacked up in the boxes. I have found that AceAddity has been working very well for me and at $14.00 a KG it does what I would expect. They seem fairly limited in colors though. I didn't even know about Polymaker until now. It is only a few more dollars a roll and seems to have a massive PLA selection. Thank you for all of your input and I look forward to your future videos!
@LoyalMoses 2 ай бұрын
Well, welcome to 3D printing! Congrats! And thank you, I absolutely love to share my passions and these replies give me a boost! I love to hear that you are stockpiling some filaments! LOVE IT!
@theshenanigator154 6 ай бұрын
I won a roll from you the week i bought my 3d printer. Polymaker has been by far the best Filament i use! The LM sparkle green is AMAZING! Thanks for sharing the story!!
@LoyalMoses 6 ай бұрын
Pretty darn cool! Thank you so much for being here and supporting!
@AndrewWorkshop 6 ай бұрын
Just got some Polymaker LW for a project where I needed some weights savings, seems like good stuff. Was nice that I could just order from Amazon.
@LoyalMoses 6 ай бұрын
Awesome!
@almarma 6 ай бұрын
Also Polymaker came to rescue when 3D Printing General’s channel was closed by KZfaq and, at least during the back and forth they sponsored him to try to help him survive. They won my heart with that move and they’re now permanent members of my stock whenever I need decorative prints despite it’s not that easy to buy it here in Norway (because of price mainly)
@Draculla21 6 ай бұрын
That whole situation is how I found polymaker in the first place. 3D print general FDE is my all time favorite stuff
@LoyalMoses 6 ай бұрын
Yes, that is a HUGE deal!
@LoyalMoses 6 ай бұрын
AWESOME!
@FilamentStories 6 ай бұрын
Filament addiction? Guilty here too. I just love filament; all different colors, types and brands. I completely agree with you about PolyTerra being a fantastic filament. When I first found it i bought every color they had just after getting my first spool of it. Such a great company too with super nice folks. 5000 spools?! Filament tour, filament tour!! Great video. -Courtney
@LoyalMoses 6 ай бұрын
So much awesome filament in the last couple of years! Love it.
@timha4102 5 ай бұрын
This is interesting because I‘ve printed with dozens and dozens of different brands and filaments without really taking notes or anything but I developed a feeling that I’ve had the best experience with Polymaker filaments.
@LoyalMoses 5 ай бұрын
It’s an awesome product!
@Luptonium 6 ай бұрын
Yeah, I remember winning it a year ago. Was great stuff. Have bought a lot since. And as you, and Mrs. LM know won quite a bit as well.
@LoyalMoses 6 ай бұрын
Almost a year!
@dedchkn 6 ай бұрын
I have been using them since I started in late 2020. I very rarely use other brands unless I need very low-cost boxes of 2 or 4 spools in white, gray, and black for prototypes and drafts.
@LoyalMoses 5 ай бұрын
Such good filament! Amazing company!
@Krendro 4 ай бұрын
I just spent my whole weekend printing some of their PETG and I must say they will be my go to from now on. Now I’ll have to try their PLA and see how I like it and if it’s anything like the PETG I’m sure I’ll be purchasing them exclusively.
@LoyalMoses 4 ай бұрын
That's great to hear! Try the PLA Pro! You will LOVE it too!
@YourBuddyDinec 6 ай бұрын
I'm literally in the process of putting up more shelves in the room for polymaker storage right now! 😁
@LoyalMoses 6 ай бұрын
YES DINEC! MORE FILAMENT! 😁
@FilurenNo1 6 ай бұрын
Never tried polymaker filament before. But that LM-green looked awesome! Just discovered 3D-printing a couple a months ago and your videos and twitch channel helped me a lot how to think about my own goales with 3D-printing. Mostly use basic colours right now and I'm a little afraid to know what brand to trust? And some of the other branded 1kg 25$ spools of basic pla-filament that I orderd are really bad! Orderd some of them in bulk because I thoght I was smart and it became the opposite. Still trying to find a good filamentbrand with nice coulurs that not just becomes waste +25% of the time. For a newbie it's a bit of a jungle. Keep up the good work!
@LoyalMoses 6 ай бұрын
Thank you! Welcome. Well, if you come and watch my live shows and hang out in our discord, you'll get to see all of the cool stuff and be able to ask questions and see for yourself what we do with different filaments, brands, printers, etc! We'd love to have you and help!
@cheeseasmyweakness Ай бұрын
How cool. I’m definitely checking all this out. Already tried an amazing purple from them. The only brand where the color was really the color.
@LoyalMoses Ай бұрын
Awesome!
@billwiththeb 6 ай бұрын
Just getting into 3d printing..haven't tried poly maker yet but sure would try some out.
@LoyalMoses 6 ай бұрын
Welcome! 💜
@robertpearson1981 2 ай бұрын
I'm ordering that sparkle green tonight I've never used polymaker so I'm taking your advice and trying it
@LoyalMoses 2 ай бұрын
Thank you!!! 💜 I’m so positive you’ll have the same experience I do! 🔥
@nighcore 6 ай бұрын
I have been printing for 7 years and never used Polymaker filament until around October 2022 when I came across an LM Show stream. Of course the chance at free filament had me locked, and Loyal is pretty entertaining too I guess. ;) I won a spool and eventually many more through the Friday night print races. These events quickly led me to joining both the LM Show and the Polymaker discords. My current inventory of filament is around 500+ spools, with almost 300 of those being strictly @Polymaker . I am working towards the full collection. Nic has been nothing short of amazing towards this community and having the chance to work with him on projects in 2023 showed me even more of what kind of person he is. While there are many great filaments out there, the quality, vast catalog of colors, and their involvement with their commuity is what puts Polymaker on top! So thank you @Loyal Moses for the introduction and enabling my addiction also! Can't wait to see what 2024 brings!
@LoyalMoses 6 ай бұрын
Wow! What a wonderful comment! Very kind and I am so happy that you mentioned Nic. He deserves so much credit for what we have in this community. I’d love to share this comment on Twitter! Thank you for everything that you do for our community and me and my family! 💜 Print races will return!!!
@nighcore 6 ай бұрын
@@LoyalMoses You are more than welcome to share!
@dirtyredwitdacat7074 3 ай бұрын
I new to 3D printer and decided I might just order some from here cause I really don’t know which filment to order. You have an new sub
@LoyalMoses 2 ай бұрын
Thank you!
@Senbonzakura776 6 ай бұрын
Cool vid. Well, I've never tried Polymaker, but now I intend to give it a shot. I'm looking over their site and see the PolyLite CosPLA. I'll probably order some to try on this kit I'm about to print.
@LoyalMoses 6 ай бұрын
Thank you! You'll have a wonderful experience for sure. Let me know how you like it!
@robhaynes6173 6 ай бұрын
Which version is the best for making display helmets. It’s display only so it doesn’t have to take a cosplay beating. It just needs to print nice and sand/paint well.
@LoyalMoses 5 ай бұрын
Their CosPLA is pretty epic!
@user-qf3uw7cp4o 6 ай бұрын
I love that lm sparkle green. I never used poly maker filament yet, but man that looks nice
@LoyalMoses 6 ай бұрын
Thank you! It’s such a good looking filament, I’m so proud of it!
@WhyplayGaming 6 ай бұрын
I love poly maker been using them on my Ultimaker for years but now I have a new bambu, so currently trying out there filliment, but I may start going back to Polly maker
@LoyalMoses 6 ай бұрын
This is awesome to hear!
@SpannMagoo 6 ай бұрын
Polymaker filament truly is amazing stuff. I got my first spool of it from Loyal and since that spool I have increased my private stock to almost 80 spools and I would say 70-80% of it is Polymaker now.
@LoyalMoses 6 ай бұрын
80 spools!? OH MY GOSH! That is crazy how fast you stocked up on filament! WOW!
@Tacomaster-lq2ik 5 ай бұрын
I’m getting a Bambu lab A1 and I might have to eventually try this filament
@LoyalMoses 5 ай бұрын
That’s awesome! 🔥
@AroundTampaBay 6 ай бұрын
i dont even have a printer yet and i have gone and looked at your filament multiple times and close to just buying to buy it. thank you for the great content. man i want a printer but totally lost to what to pull the trigger on. so many options and so many people with different views its hard to know what should really matter. and i know its my decision end the end. Ive thought about getting used but dont know. Maybe you could do a video on used printers and if worth it.
@LoyalMoses 6 ай бұрын
Awe! That it just awesome, and I really appreciate that. Join our discord! Tons of good info. loyal.ms/discord
@baljazz 4 ай бұрын
What i really want is a test plate of all their colors. Wish companies offered these out. Would help a lot when trying to find out the right color.
@LoyalMoses 4 ай бұрын
Some companies do!
@LordWiseWolf 6 ай бұрын
Love Polymaker cause I love the matte finish. It just has a unique look for my projects. Then saw 3D print generals flat dark earth, and about to order your color for my first helmet when my P1P with the AMS gets here Friday. What’s the best way to use their filament with the AMS?
@LoyalMoses 6 ай бұрын
OH! Thank you for your support, that means a lot! I just put the spools straight in the AMS, they work great!
@michaelpecor8803 Ай бұрын
Polymaker is amazing. Practically everything I use comes from them😊
@LoyalMoses Ай бұрын
Yes they are!
@NWGR 4 ай бұрын
Awesome stories. I'll tune into your streams too. 👍
@LoyalMoses 4 ай бұрын
Thank you! Say hi, make sure to get my attention, remind me that you are from YT! Join our discord too!
@NWGR 4 ай бұрын
@@LoyalMoses Will do!
@Microbus 6 ай бұрын
I love Polymaker! Loyal Moses and the LM Show are the absolute best!
@LoyalMoses 6 ай бұрын
Thank you Microbus! You are so kind! 💜
@arthurtorricer4544 6 ай бұрын
Do all the rolls come with cardboard? Does it work will with the AMS for x1c and the A1 MINI? It should work fine with my 1st printer the snapmaker J1. I would love to try Polymaker
@LoyalMoses 6 ай бұрын
Yes, they've switched over to cardboard spools, and they work fine in my AMSs. Never had an issue, I just make sure to blow air into the AMS to keep carboard dust out. You can also print hub covers if you are concerned and spool weights too if that ever becomes a problem for you.
@arthurtorricer4544 6 ай бұрын
@LoyalMoses I have many left over plastics spool holders from bambu labs..they just don't have the QR codes. Hey Maybe Polymaker can come up with some kinda of QR scan code which could be work with AMS?
@genemaster74 6 ай бұрын
G'day to you, Loyal Moses. Ive only joined your little corner of the internet recently, and im finding it a quite informative. This vid on polymaker has been the hundredth time ive heard of them from all my U.S. Makers, but ive tried to get some locally and its in small amounts with a hefty price too. So ill stick with my no-name brands and maybe on day i can get some. From A M8 Downunder
@LoyalMoses 5 ай бұрын
Welcome and thank you!!!
@achillecalabria-nf6wg 6 ай бұрын
i havent used polymaker yet but im now looking forward to trying it.
@LoyalMoses 6 ай бұрын
Fantastic! You’ll love it!
@achillecalabria-nf6wg 6 ай бұрын
@@LoyalMoses great thank you
@ThePrintHouse 6 ай бұрын
I was always curious how you got a spool! Great story!!
@LoyalMoses 6 ай бұрын
Thank you!
@battousaid1 6 ай бұрын
Some of my best prints are done with polymaker filament didn’t know about them until I seen your stream I highly recommend Polymaker absolutely some of the best if not the best filament out there. And gotta love the creepy starfish 😂
@LoyalMoses 6 ай бұрын
DAVID! Good filament matters and we are spoiled with Polymaker for sure! Thank you for the Starfish, you and Mark knocked it out of the park!
@battousaid1 6 ай бұрын
It was a fun project to work on. And completely agree with be spoiled with polymaker filament
@ChrisGTCG 6 ай бұрын
Loved the hearing the background story
@LoyalMoses 5 ай бұрын
Thanks Chris!
@Spencer1609751 6 ай бұрын
Wow they have Polysonic PLA. Now I have to try it out Thank you!
@LoyalMoses 6 ай бұрын
Yes, high speed! Amazing stuff!
@Spencer1609751 6 ай бұрын
@@LoyalMoses My Neptune 4 Pro should like it!
@TheToonamiRevolution 6 ай бұрын
I have only just started looking into Polymaker as a filament option as I usually only used Paramount 3D filament. It prints BEAUTIFULLY and has tons of colors. It is however not a very responsive company, I will have to really put them head to head and see if I become a convert.
@LoyalMoses 6 ай бұрын
Try it!
@tokin420nchokin 4 ай бұрын
It is good, every time i get polymaker stuff it just works. Their abs is fire also the gfN is good too.
@alexhalterman5278 10 күн бұрын
Do the factory spooks work in the bamboo ams?
@LoyalMoses 5 күн бұрын
Yes!
@damaylaphoenix1155 2 ай бұрын
do you have to dry Pla or petg before printing?
@LoyalMoses 2 ай бұрын
No, we have very low humidity up here.
@ypsiprepper 5 ай бұрын
I haven't used Polymaker filament yet. Have always used Esun. Which of Polymaker's CF would be good to use? I just bought the K1C and have never printer in CF before.
@LoyalMoses 5 ай бұрын
PLA CF would be great to try first!
@ypsiprepper 5 ай бұрын
@@LoyalMoses Thanks. I'll check it out.
@Johncoffee2002 6 ай бұрын
Hallo Loyal Moses. I have a quick question: I'm interested in building a filament storage shelf as you have. Can you quickly describe it ? Maybe with the STL File for the angle brackets? I assume you've used simply plastic laminated chipboard as the shelf. But how did you secure the filament spools and how do you install the LED strip? Thanks a lot !
@LoyalMoses 6 ай бұрын
Yes, home depot shelves by Rubbermaid, and the light strips are attached with the adhesive backing and they act as the bumper to prevent the filament from rolling off the shelf. On the underside I added some double sided clear sticky tape to help keep them on!
@Johncoffee2002 6 ай бұрын
Great - thanks a lot@@LoyalMoses
@nefariouscj9791 4 ай бұрын
@1:55 You know One Two Feet?!? Thats amazing! lol (The song)
@kenkirkeby4054 5 ай бұрын
I'm going to try Polymaker for a while. I've been an ESun PLA + fan for quite a bit, but the color consistency between rolls has been terrible. I don't do a lot of painting so I rely on colors matching.
@LoyalMoses 5 ай бұрын
Awesome! eSun makes great stuff! I also don’t paint!
@kelbybueckert8434 6 ай бұрын
i like polymaker filament but i can only buy it on sale in canada its a bit out of my budge but when ever i can find a role on amazon for around 20 i but a few
@LoyalMoses 6 ай бұрын
At $20, get it whenever you can!
@glennsgarageshop 3 ай бұрын
Polymaker is my absolute favorite filament, but .... I just purchased a Bambu Lab X1C with the AMS and I've had nothing but problems with the cardboard spools. I even printed their spool covers and still had problems. Any suggestions to solve this problem? I got so frustrated I just ordered a bunch of Bambu Lab's Matte PLA. I'd love to go back to Polymaker if I could find an EASY solution to this. Hey Polymaker ... why don't you use plastic spools?
@LoyalMoses 3 ай бұрын
First congrats! Did you figure out why?!
@kevin349 6 ай бұрын
Im in South Australia downunder and use and love Polymaker
@LoyalMoses 6 ай бұрын
Awesome!
@layeredwork 6 ай бұрын
I love their filament, too. Maybe this is the reason why Bambu Lab has it as an (only) option in their firmware besides their own filament.
@LoyalMoses 6 ай бұрын
You notice that too?!
@layeredwork 6 ай бұрын
@@LoyalMoses Yeah, right from the start when I bought my X1C a year ago. However, what I really miss from many other filament manufacturers are refill spools. I really like the Bambu concept. It saves resources and is much more sustainable than always buying complete spools.
@boggisthecat 6 ай бұрын
@@layeredwork ESUN have done refill spools for quite a while now. Not sure if they were the first to offer this, but they were before Bambu Lab.
@shadowminor 6 ай бұрын
Little question. Is it better to buy direct or amazon. Or does it not really matter. I see that some of the prices can vary. Like the LM filament is $5 a roll more on amazon.
@LoyalMoses 5 ай бұрын
I think whichever is best for you! Shipping is the same speed for both!
@Kimberlymogan 6 ай бұрын
That “mistake” pink is my favorite color. I call it Coral
@andrewbelcher 6 ай бұрын
Would love to try Playmaker but already have a load of filament, how do I go about trying to win a free spool?
@LoyalMoses 6 ай бұрын
I know that feeling of having a lot of filament! 😆 Join our discord and then hang out with us on our live shows! loyal.ms/discord twitch.tv/loyalmoses on Mondays, Wednesdays and Fridays at 5 PM Pacific
@lostinseale 5 ай бұрын
I hope you’re right, because I just ordered a load of poly maker filament because of you. I’ve purchased almost exclusively Overture for the last four years.
@LoyalMoses 5 ай бұрын
I am positive you’ll have a similar experience to mine! Amazing quality.
@terpcj 6 ай бұрын
OK. You sold me. Like many who've gone through many kgs of filament over the years, I've settled into my preferred brands. While Polymaker was on my radar, I've yet to get a spool of different types to try. Based on your enthusiasm and Polymaker's attention to users, on my next filament order, I'll drop in some Polymaker as well and see if it'll work for me.
@LoyalMoses 6 ай бұрын
I think you'll love it!
@jessicaalvis7063 16 күн бұрын
Does Polymaker have an eu warehouse? I really want to try this :)
@LoyalMoses 16 күн бұрын
I believe so, but I don’t know for sure! What does their website say for shipping options?
@SeriesDmusic 6 ай бұрын
How does this stack up against Creality hyper pla? I’ve been wanting to try another but not really sure.
@LoyalMoses 6 ай бұрын
Ah, that hyper PLA is cool stuff! Polymaker has SonicPLA which is their high speed PLA, really good!
@nmaparicio 3 ай бұрын
@Polymaker i've got a Bambu X1C with AMS... and i'd loveto try Polyterra or even Polylite but card spool aren't the best for the AMS... Btw.. where to buy Polymaker in europe?
@LoyalMoses 3 ай бұрын
Cardboard spools work great in the AMS.
@3dpathfinder 6 ай бұрын
Well I had to try my first PolyMaker so grabbed 2 rolls of the Lm Sparkle Green
@LoyalMoses 6 ай бұрын
WHAT!? That is awesome! Thank you! ! !
@mikecrane2782 6 ай бұрын
I use Extrudr filaments for some materials that are unique, shipping can be expensive but they do offer free shipping after you buy three reels or so, and every now and again you get discount codes.
@LoyalMoses 5 ай бұрын
Awesome!
@markbaugus6389 6 ай бұрын
I am trying to decide which printer to buy. Size is my no. 1, no. 2 I would like to print in cf and nylon as well as PLA. I like the idea of multiple colors, however it is not required. I like much about the Bambu Labs CF but don’t like the amount of waste it produces in color change and is just barely large enough for my prints. I saw many of your videos and would be okay with an open air system like the sidewinder max or the Neptune 4 plus. Not sure if they will successfully print nylon. I am an engineer so I could build an enclosure and add the heat and ventilation easily if the rest of the materials would handle it. Speed is very important to me as well. I notice the Sidewinder has a new 4 pro coming out but there is no mention of a max version at this time. The sidewinder and Neptune do not have WiFi which looks to be on the new Sidewinder 4 pro. I plan on having my 3d printer setup in my outside building. Being able to print WiFi would be very advantageous. What would your suggestion be. I am still determining my budget if I get one of the less expensive models then I would just spend the additional budget on picking up some additional filament.
@LoyalMoses 5 ай бұрын
If you want nylon, you’ll need an enclosure. Have you considered larger industrial machines?
@kylependygraft2023 6 ай бұрын
I love using polymaker filaments. I just wish I could find their filaments in Dual and triple color along with multi color. I use a lot of Silk finish filaments. Unfortunately I am not able to support polymaker either due to color availability and price. Amazon offers so many colors, bands and free 2 day shipping that I have to save money and time where I can. I would love to come across this color pallet from Polymaker to see what I might be missing.
@LoyalMoses 6 ай бұрын
Yes, the dual and triple extrusions are crazy cool! Polymaker has some duals in both polyterra and silk!
@kylependygraft2023 6 ай бұрын
@@LoyalMoses I guess I have just over looked them.
@AndrewAHayes 6 ай бұрын
When I bought my X1 Carbon I bought 5 rolls of Polyterra and I love it, what I don't like is the cardboard spools and having to print rims for them. My go to filament before the X1 Carbon was Ziro, you get a quality mylar coated re-sealale bag, a card to write print notes on and a sample of their more exotic filaments, the windings are the best I have ever seen and it prints amazingly, I have much less trouble with their spool than the Polymaker one.
@LoyalMoses 5 ай бұрын
I’ve not printed rims for mine at all!
@TheSinzia 6 ай бұрын
I wish there was more Polymaker in Microcenter. I know that a lot of the Inland stuff is rebranded Polymaker, but it would still be nice to have the full offering local and in-store.
@LoyalMoses 6 ай бұрын
I bet that has to be in the works! I would love to see Polymaker everywhere! Even Walmart!
@EriconYouTube22 2 ай бұрын
Is overture polymaker? Or are they separate?
@LoyalMoses 2 ай бұрын
I think that’s just a rumor.
@joedaugherty9533 5 ай бұрын
Here in Taiwan it’s expensive to get filament, but I do get polymaker from a printer manufacturer close to my house and I absolutely love it and how consistent it prints, but I’m still very limited in quantity I can get
@LoyalMoses 5 ай бұрын
Sorry to hear that it is expensive there!
@landkpall7268 6 ай бұрын
I’m new to 3d printing and have been buying filament based on how cheap it is. As a result, I have to deal with filament breaks, tangles and inconsistent color. I’m going to try Polymaker based on your recommendation. If you are right, it will save me money and just as important, time.
@LoyalMoses 6 ай бұрын
I really think you should! They are an incredible company, and if you EVER have a problem, let them know and they will absolutely take care of you.
@TweadyYT 6 ай бұрын
When comes the video to the Artillery Sidewinder X4? :D
@LoyalMoses 6 ай бұрын
Soon!
@FATSNAIL-FPV 6 ай бұрын
so... pla... great.. how is their TPU 95A like? great vid btw! happy new year!
@LoyalMoses 6 ай бұрын
Polymaker's TPU?! They have one of the best selections.
@quentinbusuttil2760 6 ай бұрын
Although I love Polyterra, you can’t compare it with the Extrudr Greentech that you mention at the beginning (first that comes to mind, Polyterra is PLA regarding temperature resistance while greentech pro will resist over 100C
@LoyalMoses 5 ай бұрын
You can definitely compare it! It all depends on what you are comparing it for.
@buildersmark 6 ай бұрын
Its nightmare fuel Starry Fish!!! I wish I'd used the right version of lime green on that project... still fun though. Polymaker is definitely the go to filament! Sparkle Drk Green & the Sparkle Drk Blue were awesome colors.
@LoyalMoses 6 ай бұрын
You and David crushed that print! SO AWESOME!
@buildersmark 6 ай бұрын
@@LoyalMoses what I should consider is sending David a couple of spools of SDG & SDB then we do it again in those colors. Maybe something that can be given away on stream.
@zulmohd8810 5 ай бұрын
I LOVE IT😊
@CraftifyPrints420 5 ай бұрын
Think I'll give polymaker a shot. I like the pokemon stls they have been posting! I wanna try the lava red but I don't want pink 😂 hope it's not a issue anymore but first order will go in today for a couple of colors.
@LoyalMoses 5 ай бұрын
Haha! Nah, they got that fixed! 😆
@badwolfcustomairbrushingde1432 6 ай бұрын
Have not tried Polymaker. Curious to see how it preforms. How can I get your loyal filament. Amazon?
@LoyalMoses 5 ай бұрын
Try it! You’ll love it! You can get my filament on Amazon or loyal.ms/LMSparkleGreen
@dancoon7653 6 ай бұрын
I'd love to try some but they don't ship directly to the UK (frustrating) and it's soooo expensive on Amazon, even if it is good I can't justify paying over double what I'm currently paying for a roll of PLA. 3DJake sell it but they are actually based in the EU so we run the risk of getting hit with import taxes that put the price up. If you could talk them into selling directly in the UK eith all the ott import costs then I'd snap it up in a heartbeat.
@LoyalMoses 6 ай бұрын
I know, it's tough, some places make it hard for companies to get their products there.
@leedissel8808 6 ай бұрын
Total newbie here!! Just waiting on my new Bambu combo..I would love to enter for a free sample...
@LoyalMoses 6 ай бұрын
Congratulations!!! Get over to our discord and hang out with us when we are live on twitch!!!
@orozcocris93 6 ай бұрын
are their spools ams compatible?
@LoyalMoses 6 ай бұрын
I use them in the AMS no problems.
@MsJellyfan 6 ай бұрын
same issue with SUNLU PETG Orange and Red...now, neon orange and soft pink instead of dark cherry red.
@LoyalMoses 6 ай бұрын
Oh no, just inconsistent color batching?
@MsJellyfan 6 ай бұрын
@@LoyalMoses the red they changed "officially" after my request if they changed the color...red was amazing...i´m not to red...but that almost bloody elegant red...now a "creamy rose" but the orange i got and asked, they denied the changes. the orange is also grat like there (neon)green pet g but i used the old orange a lot, really a slightly transluscent fruity orange! my favorite petg color. Really not great, especally if you have to provide colors to customers............
@danielwolman 6 ай бұрын
why is it better than bambu labs filament? im new to 3d printing and have a p1s and an ams so have just been buying the bambu filament
@LoyalMoses 6 ай бұрын
Polymaker has an amazing R&D department and is on the front lines of innovation, quality and standards for our industry! Give it a try, also Bambu filament is INCREDIBLE too!
@rebootnut 3 ай бұрын
Based off this video, I became a Polymaker fanboy. Their PLA's & PETG's are excellent & virtually trouble-free.
@LoyalMoses 3 ай бұрын
That’s awesome to hear! I am 100% sincere with how I feel about them and the amazing things they do for our community and industry! Thank you for sharing this!
@423carter 6 ай бұрын
I'm still new to 3d printing but all I've used is Sunlu PLA + filament and love it. I'm scared to spend money on any other kind because I don't want it to be bad and a waste of money.
@LoyalMoses 5 ай бұрын
You won’t go wrong trying it!
@uujims3762 6 ай бұрын
Try duramic pla+ at 260c. It’s prints decent but it’s super strong. Other then temperature resistance it’s proboaly stronger then abs and petg combined
@LoyalMoses 6 ай бұрын
Great tip!
@Enkis_rage 3 ай бұрын
Hopefully, they will add RFID Chips to the rolls and make the spools better suited to AMS systems. It's not an absolute necessity, but it would be a very nice quality of life improvement. Especially considering most printers are moving this direction or playing with liquid color reservoirs that color a base material as it's extruded, which will still most likely be RFID connected color tanks.
@LoyalMoses 2 ай бұрын
Would be cool!
@DL-nw2vz 5 ай бұрын
Love polymaker!
@GT-po6by 6 ай бұрын
Okay okay I find a place to buy and try
@LoyalMoses 6 ай бұрын
:-)
@1975murf 6 ай бұрын
Love Polymaker! Bought my first printer about 8 months ago and didn’t have a lot of filament. Upgraded to a Bambu and for ease of use and mixing and matching colours/materials I knew I was going to need to choose. After weeks of adding filament to various carts, letting it sit, and then starting all over again, I finally decided on PolyTerra for my first big stock up because it prints beautifully and has a gorgeous range of colours! PolyLite will be next!
@LoyalMoses 5 ай бұрын
Fantastic!!!
@CheekyHeeler 6 ай бұрын
Hi. My name is Elijah and I'm addicted to filament. It's been 5 days since my last order and 10 minutes since adding more to my Amazon wishlist. When someone posts on Facebook to show off their print, everyone in the comments is asking for the STL and I'm asking for filament names
@LoyalMoses 5 ай бұрын
Haha
@Joeybagofdonuts123 6 ай бұрын
im sold bro. just ordered 5 spools lol
@LoyalMoses 5 ай бұрын
Boom! Congrats and thank you!
@vramxn7793 6 ай бұрын
sounds like great filament, but why is it two or three times the price as the competition for less of the speed? (speed pla pro)
@LoyalMoses 6 ай бұрын
What filament is two or three times cheaper?! Polymaker is the highest quality of filament at VERY competitive pricing.
@vramxn7793 6 ай бұрын
@@LoyalMoses elegoo's rapid pla plus, is less than half the cost of the speed pla pro, and it prints faster
@legendaryshadow6428 3 ай бұрын
is polymaker US only?
@LoyalMoses 3 ай бұрын
Worldwide!
@therick0996 6 ай бұрын
Polymaker is fantastic! For basic black, I like Sunlu (due to cost + quality), but for everything else, Polymaker all the way
@LoyalMoses 5 ай бұрын
Thanks for sharing!
@asm2750 6 ай бұрын
I still need to try polymaker, I use a ton of protopasta since it has always been consistent for me. How are Polymakers ABS and ASA filaments?
@LoyalMoses 6 ай бұрын
Protopasta makes AMAZING filament! I've always referred to them as a boutique filament company, and Blood of My Enemies is my favorite!
@Quinnebaug 4 ай бұрын
Don't get their PETG it's so bad
Small Batch Factory
Рет қаралды 83 М.
CNC Kitchen
Рет қаралды 181 М.
CNC Kitchen
Рет қаралды 1,9 МЛН
PRINTING PERSPECTIVE
Рет қаралды 256 М.
Inter Link
Рет қаралды 1,3 МЛН
i-shoppers обзоры
Рет қаралды 839 М.
EG Axternal
Рет қаралды 1,6 МЛН