WHY WAS THIS RETURNED? 2015 Dodge Ram 2500 5.7 'BAD' Engine Teardown

  Рет қаралды 390,072

I Do Cars

I Do Cars

8 ай бұрын

To peruse our parts inventory and parts cars please visit www.Importapart.com or email us at Importapartsales@gmail.com for part inquiries.
If this is the very first teardown you've found on this channel, here are some of my favorites:
Dodge Ram 8.0L V10 • 8 LITERS OF DESTRUCTIO...
Ford 6.8L 3V V10 • FORD 6.8L 3V V10 TEARD...
Dodge Viper V10 • This Dodge Viper V10 E...
Mercedes AMG V8 • Mercedes M156 6.2L AMG...
Today we dig into a 5.7L Hemi from a 2015 Dodge Ram 2500. This was an engine that was sold at a local auto salvage yard and then returned as defective. Unfortunately I didn't get any details like mileage, or reason for return. These are pretty expensive engines (Around 3500-4000 dollars) which generally means there's a high demand for them. Lets figure out what went wrong with this one.
The 5.7 Hemi had a few iterations throughout the years but this is one of the latest offerings making 383hp and 400ft lbs of torque. Overall I think these engines are fairly reliable but certain operating environments and quickly lead to problems. They do run quite well and aren't particular hard to work on which is nice.
Why am I doing this? I own a full service auto salvage yard in the Saint Louis Missouri area called Importapart. Part of our model includes buying core or bad engines and dismantling them to salvage the good parts from while recycling the rest. We do not rebuild engines, merely supply parts to those who do.
I hope you enjoyed this video, as always, I love all of the comments, feedback and even the criticism.
Catch you on the next one!
-Eric

Пікірлер: 982
@TheMeganBerg
@TheMeganBerg 8 ай бұрын
😂😂🙈 now i know why you were so sweaty. Not from watching cops
@deplorablelibertarian
@deplorablelibertarian 8 ай бұрын
Cuz’ I know that cops doesn’t start till 4!
@BlueSteel331
@BlueSteel331 8 ай бұрын
your mom watches cops. 🤣
@johnkonc1100
@johnkonc1100 3 ай бұрын
​@@deplorablelibertarianffffffffffffffffffffffff
@mikewoolie5153
@mikewoolie5153 Ай бұрын
...
@Josb_Bluebird2143
@Josb_Bluebird2143 8 ай бұрын
The “Whoever invented the red locking tabs, I hope McDonald’s gets your order wrong” had me lol!
@ahseaton8353
@ahseaton8353 8 ай бұрын
Worst curse ever!
@patrickmorrissey2271
@patrickmorrissey2271 8 ай бұрын
That is a true classic..... I was cracking up.... What a horrible curse, omg... That's the worst, isn't it?? You get home, or you get back to work, you open that bag, and it's not your order.... And the sad trombone plays.... Ugh, I hate that....
@randomstuff159
@randomstuff159 8 ай бұрын
fr tho those locking tabs are hell esp if you break them from trying to crack them open
@brentworls8509
@brentworls8509 7 ай бұрын
I mustv'e invented these.
@DavidJackson-fb4ix
@DavidJackson-fb4ix 7 ай бұрын
Wouldn't a worse curse be that i hope chick-fil-a gets your order wrong
@fuse8052
@fuse8052 8 ай бұрын
I see you dislike the red lock tabs as much as I do. Your preparation for dipstick removal skit was hilarious!
@jimrossabrena7955
@jimrossabrena7955 8 ай бұрын
Did you see a few videos back when he used the forklift to remove the dipstick tube?
@fuse8052
@fuse8052 8 ай бұрын
@@jimrossabrena7955 I'm sure I watched it. Remembering it is another story
@alberteinstein3078
@alberteinstein3078 8 ай бұрын
​@@fuse8052how do you remember if you dislike the red lock tabs then Genius.
@samholdsworth420
@samholdsworth420 8 ай бұрын
Not a skit sadly😢
@yeahitskimmel
@yeahitskimmel 8 ай бұрын
​@@alberteinstein3078once you've experienced them on a plug that already has impossible access you never forget
@basshead993
@basshead993 8 ай бұрын
I work on ambulances for my local fire dept., all of the ambulances are 6.4 hemi powered. On average, at 60k miles they wipe a lobe off the cam. Every ambulance has had at least one engine replacement or been rebuilt. These engines despise idle hours because of low idle oil pressure.
@1976axerhand
@1976axerhand 8 ай бұрын
I heard it's because they designed the cam to high and does not get enough oil to lube it at low rpm?
@snek9353
@snek9353 8 ай бұрын
Low idle oil pressure? They use 0W40 and have fast idle capability right? How can they have low idle oil pressure?
@johnlanser1951
@johnlanser1951 8 ай бұрын
Because of idling horror stories I don't idle at all. Always moving if my car is on. But I have heard 2016 and up hemis got a lot better with this issue. Also helps of you don't have MDS. My car is a manual so no MDS.
@snek9353
@snek9353 8 ай бұрын
@@johnlanser1951 The engine in this vid didn't have MDS, it has nothing to do with it.
@TestECull
@TestECull 8 ай бұрын
Which just shows they're a shitty engine, because the LA and RB series V8s from before them didn't have this problem despite the cam being in the same exact spot.....nor did the old hemis from the 1950s when V8s in general were still pretty new to MOPAR. This is also not a new occurrence for chrysler these days. Anyone remember the 2.7 V6s in the Sebrings and Intrepids around the turn of the 21st and how they would fail catastrophically due to poor oiling regardless of maintenance history?
@allanwallace9375
@allanwallace9375 8 ай бұрын
Love your sense of humour Eric.. The combination of mild slapstick, self deprecation and Ironic Sarcasm is just brilliant, and works to a global audience. Wishing you all the success in the world for an excellent channel.
@mkpi1110
@mkpi1110 8 ай бұрын
I have a 2017 5.7 with 290,000 km and I stick to 7500km oil changes and she's been a dream to own!
@Devlins10
@Devlins10 3 ай бұрын
Synthetic? 5w 20?
@Chris_de_S
@Chris_de_S 28 күн бұрын
Enjoy the fuel bills dude?
@peterwilding1203
@peterwilding1203 8 ай бұрын
Gold medal for dipstick removal!
@Kiham80
@Kiham80 8 ай бұрын
The only thing missing was some 80s pop-rock and the training montage would have been complete!
@tylernottayler
@tylernottayler 14 күн бұрын
those head bolts cracking when you loosen them gets me every time its so satisfying
@CrazyPetez
@CrazyPetez 8 ай бұрын
Eric, your weekend engine tear down videos are the best part of You Tube. “I hope McDonald’s gets your order wrong”😄😄😄
@ouch1011
@ouch1011 8 ай бұрын
This engine is a perfect example of why you don’t just put a cam and lifters in these things when they flatten the cam. It scatters metal *everywhere* in the engine. Back when these engines were still relatively new and the cam/lifter failures weren’t as well known, the shop I worked at would put cams and lifters in these (and LS’s). They all either had repeat cam/lifter or bearing failures within a year or 2 later. Imagine dumping a couple table spoons of powdered hardened steel into your oil fill tube. That’s basically what happens when the cam and lifters fail.
@Dowell318
@Dowell318 6 ай бұрын
So then what's the proper way to handle it when the cam gets flattened? Complete tear down and rebuild?
@TheNugler
@TheNugler 3 ай бұрын
@@Dowell318 Chrysler recommends replacing the entire engine.
@litz13
@litz13 8 ай бұрын
Note the 2019 date on the oil filter - this engine was essentially destroyed and pulled only four years into its life.
@PhOeNiXpIoLe
@PhOeNiXpIoLe 8 ай бұрын
That would’ve been the last time the oil was changed, could’ve ran on the same oil and filter for a year or more judging by the varnish throughout the motor, it probably only saw two or three oil changes it’s entire service life. Not good for any engine but the HEMIs absolutely don’t tolerate it at all.
@devintariel3769
@devintariel3769 6 ай бұрын
​@@PhOeNiXpIoLeindeed. I doubt it was just long distance commuter miles either which would've been better.
@FrankyRedEyes
@FrankyRedEyes 8 ай бұрын
Clear proof that training pays off!! Nicely done my friend !! 😂
@Skeeter69420
@Skeeter69420 8 ай бұрын
Saturday engine tear down time after working on cars all day. Thanks for all the great videos.
@unavailablenumbers
@unavailablenumbers 8 ай бұрын
Cams on these are really hard to pull when they get wiped like this. The cam bearings might not LOOK worn, but if you really check, they're almost always warped. Thankfully the block has enough strength there that it doesn't really matter. Despite everything it's been through, this motor's definitely a very good builder as-is. Probably doesn't even need to go 010. I'd estimate mileage at 150-200k or above. I don't think they drove it much after the lifter failed fully. Also, I'd hang onto that crank. It's very serviceable, and despite being the cast one? 4893356AA is on permanent 6+ week backorder, and I don't know any source for them at all.
@jamesmedina2062
@jamesmedina2062 8 ай бұрын
Why no cams available? Who makes em?
@DL101ca
@DL101ca 7 ай бұрын
​@@jamesmedina2062cams are available, cranks aren't.
@donovanhebert8291
@donovanhebert8291 8 ай бұрын
This looks like a classic case of high idle time on a Hemi. If you avoid idling the engine, the lifter issues are mostly non-existent. As someone else rightly pointed out, low oil pressure on the top end at idle is the culprit. There is a "fix" that is preventative. The oil pump from the 6.2L Hemi can be used to generate higher oil pressure as the gear has more teeth to generate more pressure across the RPM range. It is also a direct bolt on swap. Otherwise the best course of action is to avoid idle. Personally, I have this exact engine in my 2015 Ram 1500 Limited. I have not done the oil pump swap, but I only let the engine warm up for no more than 5min before I start driving, and I often shut it off in drive-thrus or anything longer than a stop light. Hope this helps any owners out there!
@chrisbradley3224
@chrisbradley3224 7 ай бұрын
How does Chrysler not consider idle oiling in the design of a truck engine? Truly mind boggling.
@richarddubois5529
@richarddubois5529 7 ай бұрын
Just look at the name on the truck...
@Spookiekoon69
@Spookiekoon69 4 ай бұрын
Must be miserable having to worry about that
@donovanhebert8291
@donovanhebert8291 4 ай бұрын
@@Spookiekoon69 I hear ya. I can say that for me, it isnt too bad. I just turn off the key anytime Im going to be sitting for somewhere more than just a couple of minutes. The thing is that I would be doing this anyway to save gas, so it really isnt that big of a deal.
@1gbayfisher
@1gbayfisher 3 ай бұрын
You must be ahhd or have major anxiety.... I would not tolerate having to worry about that... Not acceptable. You are far too tolerant5 of bad engineering.
@capt.graybeard
@capt.graybeard 8 ай бұрын
There's nothing I like more than having a cup of coffee and watching you doing engine autopsy, however being the old fat and retired and watching you a young man do calisthenics in the middle of it, well I almost choked on my breakfast. That was quite a humorous add-on to this video. Keep up the good work! Your videos are my Sunday morning ritual as my wife and I enjoy breakfast.
@JamesBrown-gf6sc
@JamesBrown-gf6sc 8 ай бұрын
That was savage wishing the wrong mc Donald's order 😂😭 love you videos man, this is what I truly look forward to on my saturdays
@theassetStu
@theassetStu 8 ай бұрын
I'm here for the teardowns... And you great style... Enjoy this sooooo much
@wjye
@wjye 8 ай бұрын
Great work sir. Love watching these, I find these tear downs to be super satisfying.
@masonkeller3584
@masonkeller3584 7 ай бұрын
Chrysler most likely make the 5.7's and 6.4's with an oil pump just good enough to last 100k miles before blowing up in order to keep people buying another vehicle every few years. Splash lubrication is a thing of the 60's. no modern v configuration engine is relaying on crankshaft run off to lubricate the cam. in my opinion the reason they fail is due to a sub-par oil pump that does not provide enough oil flow (volume) at idle. upgrading to a hellcat or Melling high VOLUME (not pressure) oil pump would most likely be the best way to prevent camshaft failure... great video btw. always interesting to see how these engines are made.
@user-ck2oy3xv9h
@user-ck2oy3xv9h 6 ай бұрын
Good, straightforward approach to any teardown.. and good humor... from a 30yr Master Tech who still learns from everyone
@walrus1206
@walrus1206 7 ай бұрын
Thanks for your nice channel Eric. You're a cool dude and I really enjoy watching these vids. Greets from Scandinavia!
@Cnightz
@Cnightz 8 ай бұрын
I have waited all week for this video. THANK YOU for feeding my addiction.
@63Imp283
@63Imp283 8 ай бұрын
Eric and Blue your the only channel I can watch 30mins! Keep up the great work!
@Tim-Foo
@Tim-Foo Ай бұрын
I really like the sound effects, the uh-oh, high pitched voiceovers and of course the dry humor. Thanks
@G-regular503
@G-regular503 8 ай бұрын
This episode actually made this grumpy guy laugh out loud a couple times. Thank you!!! Good stuff as always sir 😂😂😂😂
@peterblacklin9174
@peterblacklin9174 8 ай бұрын
Your photography of the ports is getting much better. I have never seen a cam that bad. Another great video. Thank you.
@jeffdayman8183
@jeffdayman8183 8 ай бұрын
Saw a few Chev 305 's with the cams made of cheese instead of iron back in the late 70's early 80's. They were that bad or worse. But this one was real bad all right! Cheers!
@robertcochran7103
@robertcochran7103 8 ай бұрын
Thank you for posting this excellent video. I really liked your preparation for removing the dipstick.
@FlySafe1000
@FlySafe1000 Ай бұрын
Man, love your videios; I always learn alot. Keep up the great work brother.
@Haloedgears360
@Haloedgears360 8 ай бұрын
Recently discovered the channel and have been loving the episode binge through all your engine teardowns as they are super interesting and you add some great dry humor to the experience. Would love to see a 3.8L V6 from one of the New Edge Mustangs.
@oldcarnocar
@oldcarnocar 8 ай бұрын
id like to see a 4.6 2v from the mustang
@patturnbow8761
@patturnbow8761 8 ай бұрын
Another great tear down. Always look forward to these. I can see Mrs. B has been making you go to the gym to train for the dip stick removal...😂
@marathoner43
@marathoner43 8 ай бұрын
The dipstick tube workout was classic. Thanks as always for my Saturday night entertainment.
@allenbeaulieu7077
@allenbeaulieu7077 8 ай бұрын
For a minute, I thought I was watching boot camp! Good warmup for pulling the dipstick tube. Great video!
@faceless3239
@faceless3239 8 ай бұрын
this was probably one of the most chaotic teardowns yet! loved it.
@DL101ca
@DL101ca 7 ай бұрын
What? This engine turned freely and all bearings were in OK shape for the most part. Where exactly did you see the chaos? The 2 failed lifters ?
@faceless3239
@faceless3239 7 ай бұрын
@@DL101ca not talking about the engine genius.
@Flies2FLL
@Flies2FLL 8 ай бұрын
Eric, when you show a Hemi, you should flip the head over and compare it to a Chevy LS head so that people understand the difference between the Stellantis Hemi and the General Motors LS heads. I bet most people don't understand the difference, though the pictures would show how it is night and day....
@erikkovacs3097
@erikkovacs3097 8 ай бұрын
I believe the HEMI was designed under Daimler Chrysler well before Stalantis bought Chrysler.
@billmyke746
@billmyke746 8 ай бұрын
​@@erikkovacs3097 Definitely a Chrysler Hemi.
@hughmann1537
@hughmann1537 8 ай бұрын
Today's HEMIs aren't really true HEMIs. The heads have been swapped for a more traditional look. So comparing an LS with one of these 5.7 heads, will look rather similar. Want a TRUE HEMI, source out an Original.
@regisphilbinsscrotum6631
@regisphilbinsscrotum6631 8 ай бұрын
​@@hughmann1537bruh,not even close to the same as an ls.heart shaped combustion chamber,inline valves vs. the hemi,oval combustion chamber, opposed valves,not to mention the dual rocker shafts
@hughmann1537
@hughmann1537 8 ай бұрын
@regisphilbinsscrotum6631 ...I was talking about the combustion chamber itself. They're not true HEMIs in the 3rd gens. ...more of a marketing ruse. So, calm down.
@AbbStar1989
@AbbStar1989 8 ай бұрын
Love this channel. Here for the support.
@CJBERMUDEZ23
@CJBERMUDEZ23 Ай бұрын
awesome breakdown my guy 🤘🏽😎
@carson2000_
@carson2000_ 8 ай бұрын
The dipstick segment was hilarious! Love your videos Eric, been watching for a little while now!
@module79l28
@module79l28 8 ай бұрын
28:35 - Eric, you need to get some sort of basket that you can hang from the engine in front of the cylinders to catch the flying pistons, either an individual basket that you can change from cylinder to cylinder or one that'll cover all of them. I know, I know, it removes the entertainment factor that is watching pistons flying out of the cylinders in slow motion but it can prevent damage when the pistons are good, like in this case. It's just an idea. 🙂
@conrasm
@conrasm 8 ай бұрын
Or maybe one of those moving blankets from HF on the floor for a soft landing.
@18Macallan
@18Macallan 8 ай бұрын
This was a funny teardown! Thank you Eric! 👍
@wilbready
@wilbready 6 ай бұрын
FORSHADOWING! I watched this video when you posted it a month ago and thought it was a shame. Fast forward to yesterday and my beloved, well maintained 2012 Ram 1500 Laramie 4x4 dropped a lifter and now I need a camshaft! The sound was different than the “Hemi tick”. I immediately limped it home and had it towed to the dealership for extended warranty repair. Now, I’m watching this again to see what and where for my own piece of mind. Thank you so much, Eric! ~WilPaul
@robertsoria9293
@robertsoria9293 4 ай бұрын
How many miles on it when it failed? 🫡🫡🫡
@DDE_ADDICT
@DDE_ADDICT 8 ай бұрын
Grab a beer sit back and enjoy the show.
@rs3unos
@rs3unos 8 ай бұрын
A - I dunno if I happen to like the dipstick skits or the water pump skits more. I think those are both forever my favorites. B - Seen it a few times. Although I'm no mopar tech. I've just seen it from few of my friends with 2500's and 1500's.
@tally5k339
@tally5k339 8 ай бұрын
One of the highlights of my weekend. Thanks for another great teardown, but holy cow that cam and lifter wear made we wince 😬
@BiggRanger
@BiggRanger 8 ай бұрын
Can you please take apart some of the variable valve timing phasers? It would be neat to see how they look inside.
@DL101ca
@DL101ca 7 ай бұрын
They explode into pieces once the one screw holding the spring in place is taken off...
@pauldietz1325
@pauldietz1325 8 ай бұрын
"What do you think of the water pump?" "Big fan."
@johnelliott7375
@johnelliott7375 8 ай бұрын
Eric, I have to say that I can remember when you tore apart a old motor it was going to be a work out because everything was cast iron or steel. I am sure you have tore apart a few old school motors . Have a great Sunday and thank you for sharing this with me. Enjoyable video as always, I will Thank you again.
@jacobhosler1982
@jacobhosler1982 8 ай бұрын
12:14 I don't think you notice how the left most cylinder didn't move, when the others did move.😮😂
@budlanctot3060
@budlanctot3060 8 ай бұрын
Because the pistons move at different speeds. They "dwell" at the top & bottom of each stroke..Think about it.
@mahcooharper9577
@mahcooharper9577 8 ай бұрын
I was exhausted just watching you limber up for the dipstick tube, no way i could have fought it afyer that. Another great vid, thankyou Eric.
@AgustinCruz-zr1tc
@AgustinCruz-zr1tc 8 ай бұрын
This is my first KZfaq comment! Just had to let you know that I was cracking up at your pre workout before pulling the dipstick. 😂😂 keep them coming
@jeffb2592
@jeffb2592 5 ай бұрын
Great video! I learned a lot from all of them so far. Thanks!
@johnmoore8599
@johnmoore8599 8 ай бұрын
Glad you prepped for the dipstick removal Olympic event!
@prevost8686
@prevost8686 8 ай бұрын
Those steel head gaskets will slice you to the bone if you’re careless about removing them. I learned that life lesson last week. You’re never too old to learn something new 😂.
@cliffordcullen1687
@cliffordcullen1687 8 ай бұрын
Oow wow wow 😂
@Rospajother
@Rospajother 5 ай бұрын
Great video, my 5.7 has 200k miles, I appreciate seeing what’s inside the engines, thank you
@bonose12
@bonose12 8 ай бұрын
Dipstick likey! Well done and we appreciate you!
@09corvettezr1
@09corvettezr1 8 ай бұрын
I would like to thank you Eric for getting around to one of these as I drive a ‘14 Ram 1500 with one of these engines, though as I am totally aware of the issue, I take much better care of mine. Mobil 1 full synthetic 5W20 and a Wix 57060XP every ~9000km’s(5600mi) and the old filter cut open afterwards. The factory recommended oil change interval is about 15000km’s(9300mi). It’s nice to see how the worn cam lobes and ruined lifters translates to metal in the pan, which then translates to bearing damage. My truck has about 187000km’s(116000mi) on it now. It has had a mild tick from the engine for about the last 60000-80000km’s(37000-50000mi). The tick is almost inaudible when the truck is hot, and fully inaudible off of idle. The tick came on all at once but hasn’t gotten any worse in that time, and the truck runs fine and has never had a CEL or a misfire. A lifter failure of this sort wouldn’t take that long to manifest IMO. A few oil changes ago I pulled the oil pan and windage tray(easy on a RWD truck) to inspect the camshaft and lifter wheels as best I could, I saw nothing of note, and cleaning the oil pan turned up
@snek9353
@snek9353 8 ай бұрын
Put in some Redline oil, the tick will likely go away.
@otkrivenje0
@otkrivenje0 8 ай бұрын
I put in my 6.4 10w50 for the last 60.000km(as soon as the warrenty got out), its now on 180.000km, charger rt, and it doesn't have any weird sound, and i don't leave the car idle or anything like that. Not to mention that i drive it like i stole it.
@09corvettezr1
@09corvettezr1 8 ай бұрын
@@snek9353 will take that into consideration
@DeltaSierra426
@DeltaSierra426 8 ай бұрын
Yeah, my 2018 Ram 1500 manual says do not go over 10,000 miles for an oil change under any circumstances. Interestingly, it drops down to 8,000 miles for 2500 and 3500. Hopefully owners realize that's with full synthethic oil and not conventional, but for some reason this isn't mentioned in the manual. In any case, looks like the 3rd gen Hemi's with MDS (circa '05 and later) definitely need to be taken care of on oil changes. Kind of crazy though that some can go 250-300K miles without this problem and some get it by ~50K miles. Makes one wonder if QA/QC wasn't controlled so tight by the cam manufacturer, doesn't it??
@DeltaSierra426
@DeltaSierra426 3 ай бұрын
@@trainshot17I appreciate those details. I don't know the detail but have been hearing that Mobil 1 dropped quality in recent years, so I don't find that surprising. I used to be a big fan. As for the Pennzoil full synthetic that FCA dealers have been using for years, I don't have any concern with that... or should I bump it up to their Platinum product? I do think this issue isn't as common as the internet makes it seem to be. I'm thinking it's a QA/QC issue from the cam supplier.
@starbuck1776
@starbuck1776 8 ай бұрын
My 2005 5.7 L Ram had 300k miles on the clock when I donated it off. It’s still running fine. Good synthetic oil and 99% highway miles probably is why it lasted me so long 😃
@alexgrindnshine2522
@alexgrindnshine2522 8 ай бұрын
Saw plenty of them with 250k plus miles and ran great. No oil leaks to boot.
@WarriorsPhoto
@WarriorsPhoto 7 ай бұрын
Good video sir. I am surprised by some of your findings. Hopefully Dodge engineers learn from others findings.
@RicoCantrell
@RicoCantrell 8 ай бұрын
Cracking me up today brother.
@robwebster1098
@robwebster1098 8 ай бұрын
Just started, but as an owner of a 14 charger rt I predict cam and lifter issues Edit: 15:42 called it 😂 26:40 called it 😂😂
@snek9353
@snek9353 8 ай бұрын
You know what to do with yours though right?
@robwebster1098
@robwebster1098 8 ай бұрын
@snek9353 oh yeah I know! I'm planning on a supercharger next year and those are definitely the things getting replaced
@snek9353
@snek9353 8 ай бұрын
@@robwebster1098 Assuming you mean lifters, not what I was getting at, use a 5W30 with more ZDDP, check your oil level often, and up your idle RPM with AC on.
@daviddrew4082
@daviddrew4082 8 ай бұрын
FINALLY!!!
@adsconlabouring
@adsconlabouring 3 ай бұрын
Love your work coming from Australia.
@wglnaeclipse8715
@wglnaeclipse8715 8 ай бұрын
Tonight's final score: Gravity 3:0 Eric Entertaining and informative teardown as always!
@ajnowell8508
@ajnowell8508 7 ай бұрын
Y’know, I hear a lot of bad stuff about the 5.7 Hemi. I have a 2003 Hemi with 300,000 miles on my original engine. I really truly think it’s attributed to routine maintenance and perhaps a stroke of luck, she’s been used like every Hemi should, loud and proud. But she still trucks along perfectly.
@movingearth3726
@movingearth3726 7 ай бұрын
I have a 06 hemi with 240,000 miles the car got totaled mind you it’s been tuned hot beat the snot out of it we pulled the motor out in a different 300c and she still lives with over 280,000 hard beaten miles no issues …. Yet I believe when they are babied that’s when they have issues just saying
@Giovanni_Adventures
@Giovanni_Adventures 7 ай бұрын
My 2003 Hemi has 270,000 orginal motor and trans. An i don't baby it either, been pulling a 7000lb travel trailer for the last 3 year all around united states. Its been to 38 states and a few multible times.
@rodx5571
@rodx5571 7 ай бұрын
When they went to MDS system (multiple displacement system, or the cylinder deactivation) is when they turned to sh*t. Chevrolet has same issues with the system. Difference is the redesigned hemi oiling system that accommodates this system has issues with starving some parts of the engine. Then lifters fail. When the lifters fail (on hemi its the needle bearings in the lifter roller) its pure oil starvation. So older Hemi's have a much better track record. Its the transmissions in the older ones that were the problem. Engines lasted fine.
@ajnowell8508
@ajnowell8508 7 ай бұрын
@@rodx5571 exactly, with the new oil desperation it starves the cam at idle and the lifters start to chew it up causing the Hemi tick, it’s fucking stupid that they would ruin such a good engine with the mds
@Giovanni_Adventures
@Giovanni_Adventures 7 ай бұрын
@@rodx5571 i would agree, some people say because you idle to much. What is concider lots of idle time, if your in traffic? I live in Souther California so you know i'm spending lots of time in traffic, i have been towing a travel trailer and hooking and unhooking trailer i just let it idle plus for simple stops or if wife runs into stores i let it idle. This is before i even heard of people saying don't idle. 2003 Hemi (No MDS) 270,000 oringinal miles on motor and trans. But also on the trans when towing i'll lock out OD so its not constantly hunting for gears.
@mr_mongo7228
@mr_mongo7228 8 ай бұрын
Ahh the Hemi Tick strikes again! It looked like a good core that could be rebuildable since they are a dying breed. Poorly maintained but it is a good buildable engine to someone.
@DaveImagery
@DaveImagery 8 ай бұрын
Love your channel bro!
@Baked-as-Bread
@Baked-as-Bread 8 ай бұрын
my favorite part of saturday nights now that toonami is dead! in all seriousness i love your videos. keep it up.
@RangerX5
@RangerX5 8 ай бұрын
That was probably the loosest engine on this channel recently...Good to know how to take mine apart if the time came.
@bborkzilla
@bborkzilla 8 ай бұрын
I miss my old bug. It had exactly one wire running back to the engine.
@glenbenton4855
@glenbenton4855 8 ай бұрын
I was thinking the same thing haha. Not the bug part, but that harness seems like a nightmare of problems
@snek9353
@snek9353 8 ай бұрын
3 if you count the starter.
@cliffordcullen1687
@cliffordcullen1687 8 ай бұрын
🤣🤣🤣😊
@jnucci1
@jnucci1 8 ай бұрын
A couple of years back, I almost bought a used '17 with this engine. I'm happy that I didn't!
@peterterry398
@peterterry398 4 ай бұрын
I enjoyed watching this !!
@dewmontjerkins9886
@dewmontjerkins9886 7 ай бұрын
One could speculate all day on what causes these cam wipeouts on the Hemi. I personally think its due to the zinc being removed from motor oil. The newer Silverado trucks are doing this also.
@biggestbog
@biggestbog 5 ай бұрын
GM trucks wipe out cams due to faulty lifter design. Nothing to do with oil on GM trucks
@cameronswan8646
@cameronswan8646 5 ай бұрын
It's oil pressure. At idle and low RPMs it doesn't get enough oil to the cams and lifters. Some people swap out the oil pump for the higher pressure one from the hellcat Hemi. Seems to solve it. Crap design. Chrysler's gonna Chrysler.
@pauldietz1325
@pauldietz1325 8 ай бұрын
That Miata's windshield looks distressingly like it was broken by the driver's head.
@user-dc2kg2hm8c
@user-dc2kg2hm8c 8 ай бұрын
I'm still learning watching videos on YT. Can someone explain why idling on the Miata or any other engines is BAD?
@RobYeates
@RobYeates 8 ай бұрын
Or airbag..
@POVwithRC
@POVwithRC 8 ай бұрын
​@@user-dc2kg2hm8cGenerally long idle does not provide adequate lubrication to the upper cylinders, camshafts etc etc.
@billinhouston3291
@billinhouston3291 7 ай бұрын
mmmm hmmm, that looks like a head print to me... :(
@billinhouston3291
@billinhouston3291 7 ай бұрын
@@user-dc2kg2hm8c in addition to what roving cyclops said, the engines tend to get pretty hot at idle.
@bartonbeck3199
@bartonbeck3199 8 ай бұрын
Great tear down!
@peterkruse788
@peterkruse788 3 ай бұрын
Fun tear down ! Nice to see a turner
@fluxfirax5.56
@fluxfirax5.56 8 ай бұрын
I have a 2004 5.7. I bought it with 187k. I'm now at 273k. Runs like a top. Maintainable if you change your oil and give her some cleaner every once in a while. The moral of the story is that youdo your maintenance.
@snek9353
@snek9353 8 ай бұрын
Keep up with your cooling system maintenance, the risk with those early hemis is dropping seats from overheating them.
@Chris_de_S
@Chris_de_S 28 күн бұрын
What the hell is a cleaner? I have a 20 year old Toyota V6 - never touch the engine.
@PhOeNiXpIoLe
@PhOeNiXpIoLe 8 ай бұрын
Kind of redemption for the last 5.7 HEMI on this channel, they’re actually pretty stout all considering, seems like the suffer a lot from shotty maintenance more than anything. Thanks for this video 😊
@cliffordcullen1687
@cliffordcullen1687 8 ай бұрын
Yep, out of all the late Hemi engines, the 5.7 seems to be the trooper. I’ve seen some with a lot of mileage (200,000 plus) and still running great.
@270eman
@270eman 7 ай бұрын
Idle time kills them. The fleet vehicles that sit an idle all day don't make it past 80k miles.
@user-xg8yy7yl1d
@user-xg8yy7yl1d 7 ай бұрын
The cylinder deactivation 5.7 are totally garbage. The 5.7 with regular lifters and rods are stout enough for a post 1990s engine
@Giovanni_Adventures
@Giovanni_Adventures 7 ай бұрын
​@@user-xg8yy7yl1di agrea my 2003 Hemi is before the deactivation and its still going strong with 270,000 oringinal miles and the last 3 years pulling a 7000lb. Travel trailer. Thats kinda one reason im waiting for the new Hurricane motor, i don't care for the 5.7 deactivation.
@robertsoria9293
@robertsoria9293 4 ай бұрын
​@@Giovanni_Adventureslook up truck central on here.... he has over 225k on his hemi 2019. Im at 72k with my 19
@ZAPATTUBE
@ZAPATTUBE 6 ай бұрын
Wow, you Really know motors. Great video!!!
@remingtonwingmaster6929
@remingtonwingmaster6929 8 ай бұрын
loved the workout clip before pulling the dipstick.
@mongo228
@mongo228 8 ай бұрын
Thank you for tearing down this 5.7. I have a 2019; runs strong as an ox for now, but who knows what the future holds? Having seen the tear-down, I have a pretty good idea of what to expect should I need to dig into mine.
@riccocool
@riccocool 8 ай бұрын
18 here after 15 years of 6.2s mostly
@snek9353
@snek9353 8 ай бұрын
Preventing this issue is all about the oil, 5w30, zddp, and check the level often.
@jmcghouly4515
@jmcghouly4515 8 ай бұрын
@@snek9353the 5.7L uses 5W20 😂
@snek9353
@snek9353 8 ай бұрын
@@jmcghouly4515 That's what they tell you to put in yes, but it's not what's best.
@jmcghouly4515
@jmcghouly4515 8 ай бұрын
@@snek9353idk bro, sounds like it’s just asking for that hemi tick, I think they recommend the lower viscosity oil to prevent the lifters from chewing themselves apart. I guess if you don’t have Mds that’s fine but anyone with Mds should probably just use the recommended oil.
@aaronmays5156
@aaronmays5156 8 ай бұрын
Mc D’s will get his order wrong, why should he be any different than everyone else!
@bobp5356
@bobp5356 8 ай бұрын
Great video. You were pumping out those push ups. Impressive. 😅
@peterandersen6533
@peterandersen6533 5 ай бұрын
I enjoyed your engine 5.7 teardown. Now retired, certified in light and semi tractor engines. My last years were as an oil and gas consultant overseas onshore/offshore. I have a hemi Jeep, but I've never had to see inside the hemi engines. Hopefully, mine will last a while. Good video!
@johnm.harper773
@johnm.harper773 4 ай бұрын
Do you think we would be better to run 5W30 syn oil help save these engines instead of the 0W-20 oil that the dealer put in them! Ar
@Markingfoil320
@Markingfoil320 8 ай бұрын
I would love to see a Volkswagen W 12 (from a pheaton not the Bentley motor)
@ryanbrochu3336
@ryanbrochu3336 8 ай бұрын
Or the W8 from a Passat.
@steelio5
@steelio5 8 ай бұрын
One thing I’ve noticed about almost every tear down….. evidence of using cheap, unbranded gas and cheap oil filters.
@keithzatkalik5805
@keithzatkalik5805 8 ай бұрын
T he only way to start a Sunday morning eating breakfast drink coffee and watch you teardown a engine.
@terrywebb8636
@terrywebb8636 6 ай бұрын
Nice information video, my wife and I own a 2020 Dodge Ram 2500 with a 5.4 hemi with 120+ K on it, you said it best, you have to stay on top change the oil 3-5 k miles. Had to replace the rear main at 98k,the transmission had to come out so changed the seals, gasket and filter done it all. Saved the best for last, bought the truck new 3yrs 36k, 36,086k the water pump goes out 1,928 $ out of pocket.
@user-fk2mp5xh4s
@user-fk2mp5xh4s 6 ай бұрын
Yup, my water pump went out right after the warranty expired as well.
@2tooful
@2tooful 17 күн бұрын
Does a 5.4 hemi exist? 😒 really?
@markvietti
@markvietti 8 ай бұрын
I have 425,000 miles on the same hemi... never been apart.
@hokie9910
@hokie9910 8 ай бұрын
I’ve never seen that kind of mileage out of these engines. What’s your secret?
@thomassabia5750
@thomassabia5750 8 ай бұрын
Maybe he doesn't idle it alot
@riccocool
@riccocool 8 ай бұрын
​@@thomassabia5750one time a buddy came to lunch with me. I went to start the truck and said oh look- it's already running. 7:30-12:10 idling.
@snek9353
@snek9353 8 ай бұрын
That is impressive.
@peterblatt1962
@peterblatt1962 8 ай бұрын
A regular viewer of yours, I tell folks this is an educational channel, Would like to see an old "F" head pulled apart,,, Ive rebuild a few over the years and they are interestingly different, Yet the same as you know,
@snek9353
@snek9353 8 ай бұрын
F-head, as in an old Jeep hurricane?
@upsidedowndog1256
@upsidedowndog1256 8 ай бұрын
Forbiden glitter is my new favorite term. I work on aircraft engines....
@cliffordkiehl3959
@cliffordkiehl3959 8 ай бұрын
Good pushups. You're in good shape. I haven't been able to do a pushup in years.
@SPAZTICCYTOPLASM
@SPAZTICCYTOPLASM 8 ай бұрын
The hemi is a good engine but emission/economy regulations kill them. To keep idle emissions down, they're idling pretty low down to 500-600 rpm often, which is really low. To keep it idling that low or help it idle that low, the oil pressure at idle is under 20 psi. This wouldn't be a problem in MOST engines, but the hemi also mounts the camshaft really high up in the block (this is for performance and a great design for a pushrod engine) if you look at the heads the valves are across from each other instead of next to like say an LS, that's great for performance but that means the camshaft and more importantly lifters don't have gravity helping get oil all the way down on where lifter rides the cam compared to a lower in the block arrangement. The MDS system only kills them because it usually makes them burn oil, and the MDS system likes to starve the rest of the engine when it's not running. It's poor implementation. To make a good reliable hemi: Delete MDS (with plugs and cam and lifters not software), add a higher volume oil pump (not high pressure) increase idle to 750 or about 25psi oil pressure (software is the proper way but you can also do some janky stuff). The downside is you lose about 4-5mpg which i think is about a thousand dollars in gas yearly. I have several customers who i rebuilt their motors for and they're well past where the hemi tick would have showed up. One of them has a work truck that has 340k km since my motor was swapped in.
@firstlast---
@firstlast--- 8 ай бұрын
5mpg loss on an already inefficient engine is an immense loss in efficiency
@snek9353
@snek9353 8 ай бұрын
Some of this is right, some is wrong. There's no lack of oil to the lifters, the LS has the same high cam and lifter angle. And it has nothing to do with MDS. If you pay attention this engine doesn't have MDS. Also if these theories were true then these issues would be present in the older hemi engines, but didn't really start until 2011. The pre-09 hemis even have a smaller oil pump. Low idle oil pressure and RPM is an issue, but the cause to focus on is the 5W20 oil spec and the lack of an oil cooler. Hot 5W20 combined with a low idle RPM is a killer. Put in 5W30, keep the oil from overheating, and change some idle RPM settings a little and they have fantastic idle oil pressure. The key idle setting to change is with the AC on, idling with AC on means hot oil.
@alexgrindnshine2522
@alexgrindnshine2522 8 ай бұрын
@@snek9353you have come to the same conclusion as me. The oil weights our to thin. LS and the new Ford 7.3L pushrod engines have the same lifter problems all running Thin oil and long intervals. I like your recommendations.
@snek9353
@snek9353 8 ай бұрын
@@alexgrindnshine2522 Thanks, there's also a big one I didn't mention there. Run an oil with more ZDDP(zinc), ZDDP is a key ingredient in preventing this kind of damage and modern oils have less of it. They took out the ZDDP because it can damage catalytic converters if the oil is burned and makes it into the exhaust. So instead of doing crazy things like IDK not burning oil. They took out the ZDDP so all our engines wear out sooner. I personally use Redline High Performance 0W30 which is not only a great oil but has a lot of ZDDP. However it's pretty pricey stuff so not for everyone. But we should all do what we can to get the ZDDP we need and there's other ways to get it.
@nn-dj2nu
@nn-dj2nu 2 ай бұрын
i have a 1996 thunderbird with the 4.6, and a 1993 f150 with the 5.8, both them idle really low like around 600rpm, but i never had a problem with either of them, and they're old high millage engines now, and never wiped out a camshaft like the dodges do.
@dertmatyui
@dertmatyui 8 ай бұрын
WE WANT MALICE!
@yourmomlovespenis
@yourmomlovespenis 8 ай бұрын
In the palace?
@mattcrain6893
@mattcrain6893 8 ай бұрын
Actually rather see tear downs like this. That way I know what junk engines to stay away from.
@concernedcitizen780
@concernedcitizen780 8 ай бұрын
Malice in the palace
@michaelskinner896
@michaelskinner896 8 ай бұрын
OMG, the training exercise and dipstick removal routine was hilarious! You should consider being a part-time comedian.
@REDLINERUNNER
@REDLINERUNNER 8 ай бұрын
The workout to pull the dipstick tube? HILARIOUS!!
@Doctor_Strange_Love
@Doctor_Strange_Love 8 ай бұрын
I’m here for the malice
@user-om8tx2hf8k
@user-om8tx2hf8k 8 ай бұрын
I enjoyed your Jerry Lewis routine.
@stevelacker358
@stevelacker358 8 ай бұрын
Somewhere in the 2000’s the industry completely forgot how to make decent cams and lifters. Flat tappet, roller, aftermarket, OEM, LS, HEMI….. they all fail way more than a good old 1990s 5.2/5.9 Magnum roller cam and lifter set or a 1960s/70s flat tappet SRT from any engine (almost never, except that one run of smallblock Chevies in the late 70s with a batch of bad cams)
@andrecampbell691
@andrecampbell691 8 ай бұрын
Exhaust manifolds never come apart in the truck that easy. 😢
@mentorofarisia371
@mentorofarisia371 8 ай бұрын
Maybe add pull-ups to your pre-dipstick workout. :) Another great vid, my friend. Love your humor.
PETROL vs DIESEL Engines - An in-depth COMPARISON
26:38
driving 4 answers
Рет қаралды 3,1 МЛН
MEU IRMÃO FICOU FAMOSO
00:52
Matheus Kriwat
Рет қаралды 15 МЛН
She ruined my dominos! 😭 Cool train tool helps me #gadget
00:40
Go Gizmo!
Рет қаралды 54 МЛН
The BEST Prevention For Hemi Lifter Failure! (In My Opinion)
39:21
Reignited - Cycle and Automotive
Рет қаралды 256 М.
I bought an UNUSED 70-year old ROLLS-ROYCE crate engine!  How bad could it be?
1:37:54
Pacific Northwest Hillbilly
Рет қаралды 2 МЛН
5.7 HEMI Lifter Failure Could this FIX the lifter issue FOREVER?
26:05
Reignited - Cycle and Automotive
Рет қаралды 641 М.
Дорох и алкобайк
0:55
Разгон
Рет қаралды 1,2 МЛН
Biggest Exclavator Construction Machine🙄
0:43
zias
Рет қаралды 6 МЛН
Truck flipped? no problem | 6x6 Tatra Truck Trial Mohelnice 2024 Team no. 422
0:56
Привезли САМУЮ ГРЯЗНУЮ BMW НА МОЙКУ #shorts
0:23
РЕЖУ ВСЕ
Рет қаралды 1,8 МЛН
Делай ПРАВИЛЬНО #дневник #стройка #excavator ✔
0:13
ДНЕВНИК ЭКСКАВАТОРЩИКА
Рет қаралды 1,8 МЛН