Wow, thanks!

Thank you! :)

Gracias. Feliz de ayudar :)

Thank you :)

Thanks Jessie. Good luck with your embroidery.

Thanks Shoeb :) These videos are a small selection from my paid course: www.wilcomtutorials.com I will add more free ones over time.

Im seeling my software digitzng designer for a cheap price

I can digitize for you

All the best. Thank you.

I didn't video it but here is a picture being stitched www.screencast.com/t/8XoYycdin

Hey Alan, I run 750. If you get bird nesting try slowing the machine down or reducing the density along with using a coloured foam that matches the thread colour. Let us all know how you get on.

@@DeanRoscoe and by density you mean the spacing under the stitch values right? I actually have it set at 0.27mm right now, and have tried slowing it down to about 550-500 and still get the same problem, especially around the curved parts on characters as well

@@lilestaban5642 what brand of machine? Try experimenting backing of the density (reducing the stitches). If that works then you need to use coloured foam.

@@DeanRoscoeBarudan machine. and how would you do that? is there a specific way to do that? and we use the same coloured foam as the thread every time we run

@@lilestaban5642 In Wilcom you adjust the stitch spacing or auto spacing value. Try opening up the spacing to what you would use on regular satin embroidery and see if you still get birds nesting. This will allow you to check if it is a density problem or machine/tension/foam issue. I am assuming you have already done the obvious stuff.. change needle, try a new cone of thread, adjust machine tension?

I know I am kinda randomly asking but do anyone know of a good site to watch newly released series online?

@Colby Deandre flixportal xD

thank you, I went there and it seems to work :D I really appreciate it !!

@Colby Deandre glad I could help :D

What happens if you use cotton thread?

I usually have one tie-off stitch because the machines add a couple by default. Check the small stitches setting in Wilcom to make sure that they are not being removed. Also check your machine control panel because most have a filter setting on there as well.

No, rayon thread works better for me

First, change your needle and make sure your machine tension is set correctly. If that doesn't help then increase your stitch density.

Right click onto the empty gray space near your other toolbars, this will popup a window with a list of toolbars that you can enable/disable.

Dean, I did that and the bling toolbar is not there. How do you add the bling without the toolbar? I’m saving up to take the course, trying to stay out of debt 😊

​@@DJGASAP Try resetting the toolbars back to the factory setting. Open the bin folder and double click a file called ResetProfile.BAT

Something strange going on there. Try to use a foam colour that matches your thread, also use a heat gun to shrink the foam that is poking out.

Sure, send me the original artwork and a couple of pictures what Lids have done.

@@DeanRoscoe Sent.

Is Corel installed and registered? I would suggest contacting support at Wilcom America who will be able to assist. I am in the U.K which is a different territory.

@Dean Roscoe I purchased the barudan machine and the software from a person selling because they no longer used it. I contacted Wilcom and Barudan. We already have CorelDraw 8 not 6 so, the program that came with the Wilcom is outdated since it is an earlier version. Would I be able to get the CorelDraw 8 and Wilcom to work together or should I even bother.

The clue is in the title ;)

@@DeanRoscoe you mean wilcom bah

Merci!

Pay someone to do it for you ;)

Hatch is domestic embroidery software. I only use industrial Wilcom embroidery software.

You could probably use Hatch to make these shapes manually. Just make sure to remove the automatic underlay. I believe the collum or "block" tool is the same and then he's just using a single stitch to lay down the straight lines. The numbers of 2mm are stitch length in this program but it could be called stitch density in a different program. It's just how close the stitches are together. You can find that in the object properties area. I use Bernina software and can do what he does here but the names of things are a little different. Bernina software and Hatch are very similar. They are domestic or home-based software for the average user and as a result are more automated and have less manual controls than industrial or Professional software like Wilcom E2.

I'm not sure, the logo was supplied by the customer.

It's an investment because it makes you money.

@@DeanRoscoe No it doesn't. Its a tool. That, with practice, will help you make money. But that still doesnt justify the $1000 price tag.

@@janemasso4105 then try the $12k this one cost full that hes using

@@elevated-apparel Its a waste of money imo try out Embroideryware it has all the features of $12k software for only $89

Practice, practice, practice!

I agree.. is seem overly complicated from all the other videos

Cảm ơn 🙂