I think I learned more in this hour video than any other “get it started” video I’ve ever watched. 556k subscribers, you’ve come a long way.

Just a tip here from somebody that’s had several dentsides and still have a 78 F-150 4x4 short wheel base and a 74 F-350 flat bed. Pull the steering box off the frame and check the frame for cracks. They are known to crack and break where the steering box mounts on the frame especially when they have oversized tires on them. That much play in the steering could very well have a cracked frame.

Im not much of a Ford guy myself Dylan, but Im stoked to see you get Andre out hitting some trails again! This is one Beast of a truck, clearly built for one purpose. You must let it fullfill its purpose once more.

As normally, you produced a great video! Here's a quick make 'em run suggestion. First check the nuts on each end of the heavy wire to the starter. If they're hot, you're losing a lot of energy to resistance. Take the connections apart, and clean them as normal. If it still won't crank fast enough, connect the cable on the starter to the positive of an extra battery or jump pack. The negative of this battery connects to the starter side of the starter solenoid in the truck. This gives you 24 volts to the starter, without damaging any of the stuff in the truck, such as coil, lamps, instruments, etc. It is an old trick, but it works well.

The body style of those will always look great.

Man, I LOVE this video. When I was growin up, my old man had an '80 F350 with the small block 400 in it. I went through SO many of the same issues with that old carbureted engine. I really appreciate the effort you put into givin the ol girl a new life and savin er from sittin in the dirt rustin away. The world needs more people like you. Much love.

You know you're in trouble when "vacuum out the heads" is a required operation. It's a miracle that thing runs at all!

Hard to kill an old FE engine. Glad you didn't give up on it.

That truck is pretty dang KEWL, puts a smile on my face. Great job and God Bless my friend.

There's something about an ol Ford sitting on groundhawgs that gets the heart beating. Looking forward to seeing what you get into with it. And Missouri ain't far from Tennessee if she takes up to much space

My dad had a long bed ford 390 big block 4 speed farm truck and I drove that ole POS every where when I was your age hauling my horses and trailer all over south central and south eastern Kentucky.. Loved it. When we were done w/ it a father an son bought it and restored it completely for the kid first vehicle . The kid brought back to my dads farm to show him and both of them were tickled to death .. Haha ..

Now that's a rig I could really sink my teeth into. She sounds epic! Still sounds down on a lung or maybe one and a half, but with the blow-by, I reckon there are some rings that need to reseat themselves (maybe after the water ingress from being drowned) and if that's the case and they come around, that would certainly help her horsepower and emissions.....but she still sounds great even so. Looking forward to seeing more of this baby when you take her on some 4-wheeling. When she wouldn't start, I kept yelling at the screen for you to check your spark.....and shortly after the starter was replaced, the lightbulb moment occurred! Yeah - funny how such a physically little thing can throw a spanner in the whole "running engine" thing, eh? Been there, done that myself, mate. Even had one of my kids take off with the darn rotor one time because it looked like a cool thing to play with......! Great video, Dylan. All the best.

Right above your head in that gap between the outer roof panel and the inner should be a list of options that was stuffed in there during assembly. It’s not a build sheet but still pretty cool to have if it’s still there.

Can't wait to see how dirty this dog gets! Keep up the great work Dylan!

I like the fact that you're ready to go out of your way to make people happy, taking on other brands than Mopar. I like anything that's old, and variety is good!!!

One thing I absolutely love about the privilege of watching your content, is how excited you get when what your working on finally fires up. I'm the same way!! I get giddy. I get butterflies. I get a headrush when something finally starts. Nice to see I'm not alone 🤣

That is the Size tire I want to put on my Bronco, factory 15' just don't fill up the wheel opening. Short Bed 74 , like the bronco with the truck bed option. Nice

Nothing like the sound of a big block! Awesome find, can’t wait to see more of this on the trails!

Great video! Mystery, suspense, fire -what more could anyone ask for? Looking forward to seeing this one make it back to the mud!

That's pretty cool!! Many people would have given up way too early. This just shows what some determination can do. Hope you get this old girl back in shape, or at least able to see some trail time.

Good to see u bring a good old ford on ur channel

Awesome! Love that you were able to get the old girl goin'. Dude, you seriously need a solvent tank and an ultrasonic tank so you can get your carburetors good and clean. Love watching your videos! I'm definitely watching this project ❤

Outstanding video. Dylan you're an awesome mechanic and make working on older cars/trucks a joy. Thank you!!!!

Great video - Love seeing an old unit like this live again. Couple small suggestions, bring a little bottle of 2 stroke 50:1 mix and use that to prime the carb instead of brake clean - that can cause upper cylinder scoring because oil hasn't made it way up there in a LONG time.

That truck, "Andre" , is absolutely awesome! Fords hate anything less than 12v when trying to crank. Also very finicky about timing. I see yours came with the cracked FE exhaust manifolds from the factory. I love this truck! Can't wait for the next video.

Your videos always bring me peak satisfaction and excitement, from cleaning off rust and crust to the sound of the engine trying to start, this is all I want! And oh boy that beautiful deep rev at 54:16, draws a big smile on my face :D

As someone who is in the process of getting a 1996 f150 roadworthy, I love to see old fords brought back to life, especially this one with its cool factor.

Glad your mum is enjoying her first ever trip outside the Phil’s. Have fun guys🇦🇺🇦🇺👍👍

Can’t wait to see more of this truck! Would love to see it roadworthy again! Any updates on the 58 Plymouth? Awesome content as always!

I enjoyed watching your struggles! Looking forward to seeing what you do next.

Hell yea I can't wait to see more of this old Ford truck. This is one of my favorite truck. Can't wait for more videos on this one. Great job Dylan. 💪🛻

One of my favorite trucks was a BATTERED 79 F-250 "Custom" (which means anything but), school bus yellow, 400 Cleveland-ish, 4 spd. 4" water pipe front bumper. Massive rear step bumper. I found some old used 16.5 white spokes, rusty but free, sandblasted em, and painted them Old Caterpillar Yellow tractor paint, with some well used 33x12.50x16.5 Ground Hawgs. Whatta beast! Bought it for 400, rebuilt the Autolite 2-bl, and sold it for $800. Shoulda kept it!

What a loyal old beast they don’t build them like that anymore built ford tough baby

That’s cool… Can’t wait to see more on this truck. Thanks for another awesome video. 👍🏼

Oh Mr. McCoo! Just watched this episode. I’m 58 years old and it never gets old when someone forgets to install the ignition rotor. I’ve done it MANY times myself and had a laugh. However, it’s always funnier when someone else does it. Well done young man! I love the channel. Keep up the good work.

I think Dylan will be surprised with how many views he’s going to get with this generation Ford truck over his usual mopar stuff. Mopar stuff kicks ass but people really seem to get excited about these fords, myself included

Hello Dylan I love yours videos and it is very entertaining . I love these old junk moving and I'm watching it in 3 :20am right now😂😂😂 btw love from India 🇮🇳

I have a 1980 Ford Bronco with the 351m in it that I've been restoring. I took a break from it for a few months had a kid. I found this video and your channel, you sparked my interest to get back to work it on it again. Thank you.

Dylan, I want to thank you for saving this old Ford. I also want to thank you for something that you did for me on August 26, 2021. I met you at the Madison, Illinois stop on Power Tour and you let me sit in your Challenger and make a video of it. Thank you again for that. A word of caution with this old Ford, though. You should really be mindful jumping the battery from your Ram. It could very well give this old girl secondhand electrical problems jumping from Dodge to Ford. Lol Just kidding, brother. Keep up the excellent work you do and thanks again for bringing us along for the ride.

Can’t wait to see how this banger goes

Wow, what a beautiful find. Been looking for one like that for a while now. Short beds are hard to find these days. If you do find one they want way too much money for it.

Dylan, If you can get this running pretty good. Need to flip this quickly. It’s really rough. Congratulations on the start. And thank you for sharing! 💯

Totally cool. Love to own the '74 (when it's running, passed inspection, and safe! ) Keep plugging.

Looking forward to seeing the future videos on this one! Not enough 4x4 trucks on youtube

Frigging mint

I had a similar experience with a clutch rod back in 1976 or 77 in Fort Wayne IN. Lost half of it on my old Econoline E240 van. Went to a Sears at the Mall and picked up an appropriate sized Turn Buckle to keep driving. Ended up using that Turn Buckle instead of getting an actual clutch rod and drove it for a a few more years until I sold the van.

Try checking the power steering hoses. Mine were shot and it uses a hydroboost like setup to steer. Had to tighten the steering box up and clean 10llbs of mud out of each brake. The parking brake was stuck on a bit

Looking forward to seeing more content on this truck!

That one fought you a little bit. Good job sticking with it! Thanks for sharing

Not too shabby Dylan, had me rollin 🤣 over the rotor left off. It reminded me for a second of ur Christine motor where it ran then lost compression. Looking forward to see what you do with it!!! Bless u brother!!!

I would love to see more of this truck!

Hay you probably need to change the oil and the starter to

Something about this truck, i love it! I was thinking is that an exhaust leak or an engine knock, i think exhaust leak... Great work and happy to hear that there will be more of this truck to come! Have a great week Dylan. Thanks for great content always!

I love those old trucks, I AM so glad you got her to run. That is what I love about you. You don't quite, you save those old vehicles from the crusher . That is why I love to watch your videos. I AM A HUGE huge fan. Mike from Athens, Ohio. GOD BLESS TO YOU AND KEEP UP THE AMAZING WORK YOU DO

I'm pretty sure that this truck is a 78-79 because the early 70s trucks did not have the same grill or square headlights.

It's not voltage it is AMPs you need. The starter motor needs replaced, it is sucking up amps and turning it into heat or shorting but not spinning.

Love the old Ford trucks. My 2 favorite motors were the 4.9L and 7.5L big block. Had both of them in F250 4x4s. Absolute tourqe monsters. Nice job!

Absolutely love that truck, I'm really wanting one myself one day like that can't wait for more on this one man!!

You should definitely use those big spray paint cans (turbo cans?) to paint this at some point would be something people would love to see all painted up!

These are my favorite trucks. My family has had many of these trucks over the years. They are beautiful and tough as nails. This one looks like it had a very rough life. Great content as usual

38.5 inch Ground Hawgs. Had those on my 3/4 ton K5. It was factory but still had the K5 emblem. Those tires will go through some serious mud.

I had a '79 all jacked up like that with a 300 six cylinder in it, with a 4 sp with the granny gear. Great truck!, Same deal, carb issues, hard starting, but got it figured out till one more kid came along. Taught my then 4 year old son to say, "The men ride around in the truck, and the girls stay home to do dishes." Imagine how well that went over. Then mini van time. ah well......keep up the good work, my friend. Enjoy the vids!

Open the throttle blades when you are spraying ether into the carb.

I’m really not surprised you got it running, I mean, after er all, this IS a FORD we’re talking about!! 😊

Love watching your videos lots of car people on youtube but not many of them that do the actual work in detail

I've built and rebuilt a few FE Ford big blocks in my day and the bottom end of these motors are incredibly strong except under extreme race conditions which is why Ford made the side oiler version. Before I went in the service I almost bought one of these 4x4 short bed big block Ford trucks, with a four speed manual with granny low and a four barrel 390 in it. It was in my favorite color of Ford green. As it was I left a few cars at my parents and became a problem when they retired and moved from Ohio to Georgia. My 75 Mustang that had a hi-po 289 swapped into it and my 1966 Mercury Cyclone GT with a 427 four speed manual in it.

Those old FE engines are great. They have enough material between the bores you could bore the 360 125 thousands over and basically make a 428 with the right rings and pistons.

I've been shouting at my laptop for the last 1/2 hr "PULL THE STARTER......PULL THE GODDAMNED STARTER!"

You’ve had a lot of great vehicles on the channel. But this one has to be my favourite by far. I learned how to drive in a 78 when I was 11 years old. Absolutely love that body style Ford!

I don't know about everyone else but I almost get as excited as he does when it finally comes together!! LOL. I love old stuff coming to life and the possibility of it being driven and bombed around in all over again! It's like a second chance after it was abandoned!

Please restore that poor truck it needs A LOT of help. Unless you would like to give it away to me for my first vehicle that me and my dad could work on

I wouldn't be too bad if you could find a new bed for it. Maybe a couple license plates for the floor.

Dylan, remember C.R.A.P. when you are about to fire anything up. It stands for Cap-Rotor-And-Pray ! Tom , formerly of Sevierville now in Idaho.

I am from Mid Tenn and I love your channel and it is AWSOME to see a southern man and a Christian man on here!! So thankful your channel came up on my KZfaq feed. If you ever come close to McMinnville Hollah at me.

anybody else see the spark shoot off at 22:54

Pretty nice, great job saving that 360 from certain death!! Nice truck, love to have her on the farm, take her fishing or hunting! Thanks for the video, God bless you brother!

literally laughed out loud when you held up that rotor button!! Keep up the good work!

The sound those motors make brings me back. Had a buddy who had a 78 F250 with a 351M, 2wd, flatbed, granny 4 speed, and straight pipes coming up through the steel flatbed with tractor flaps. Dude couldn't keep himself from doing burnouts even though that truck wheel hopped SOO bad that it kept breaking rear ends, until we convinced him to put a 1 ton axle under it.

Oil, probably full of sand And the filter is probably blocked up

Bring dependability back again

Fun to watch and yell at you to pull the distributor cap as if you could hear me. That is such a cool truck. Glad you could bring her back to life! .

Not a bad start, thanks for sharing, all the best to you and your loved ones

Bud i had jus ad big of a smile as u did when it started after the plug change those late 70s fords are my favorite trucks

I enjoy getting your video's in my feed, I see old trucks on properties as I'm driving around and I can't help but wonder if they would run, or why they got parked. Lots of great vehicles just left to rot. Keep up the video's.

What a cool truck ❤ That utility rear end from that Dodge pickup you did a couple of months ago would be ace on the back of that, and used as your shop truck/rescue vehicle 👍🏼

That truck has thunderhead 289 written all over it! Go for it!

Dylan has worked on far too many Mopars to think that's how a starter should sound.

That's a 1979 F150. The grill headlights are 79 and the drivers side gas cap is on the bed. The 1977 backwards had the gas tank behind the seat and the gas cap on the cab behind drivers door. I had a 1978 lifted f150 4x4 on 33s, no matter where I drove that truck someone would always try and buy it. It got to the point where we would joke about going to find a buyer for the truck instead of saying I'm going to the grocery store, out to eat, work, etc... Do a complete rebuild, 33s, lift, dark tint windows, you can sell that truck 3 times a day, everyday, lol. Also watch out for death wobble, rebuild 100% of the suspension.

Sounds really good there have a blast on the trails when you get a chance.

Great video. I'm glad you posted. Keep them coming, thanks.

Awesome video Dylan! Love the old Fords. Mine is a 68 F250 but 2WD. It has the 360, C6 auto and top of the line everything (Ranger model). Wouldn’t mind though getting me a truck like yours to go mudding in. Love the content as always. Also, I have a larger, used steering wheel for the truck. It’s not the correct wheel but should fit.

What a thrill to see the ford working, and yes from Argentina, greetings.

It just goes to show that you can't keep and old Ford big block down. And that you did endevoure to perservere and brought her back to life. 😎 🏁

Loving the old Ford…can’t wait to find a will it start old Ford of my own.

At first the engine sounded hopeless, but it actually started up! Nice work dude.

Always love Ford content, my thumbnail is my 75 F150 that's been in the family since August of 1974. Mine has a 390 4bbl and I'm trying to get it back on the road, but I don't have the time or money. I would love to find a dentside 4WD as well.

heck yeah !! i have a 78 f250 that im working right now these rigs are monsters !! love them !

Aw man reminds me of when I try starting my truck, it's the greatest feeling hearing it fire up. Great truck can't wait to see more!

Look forward to see more on this one in the near future! Great video, Thanks!

Great video! I am looking forward to seeing the potential this truck has.