Will It Run and Drive?

Рет қаралды 1,630

2 жыл бұрын

The last thing I needed was one more car added to the fleet but one more #turbocoupe cant hurt anything.
Checkout the online store for merch at:
gearjammershop.com
#2300gearjammer
#willitrun

Пікірлер: 45

@CHVLKiD 2 жыл бұрын

But hey….that’s a win at the end of the day 👍🏻👌🏼. I think everyday should be that fun🤣

@2300gearjammer 2 жыл бұрын

Based on the condition of that TC I have a feeling it's going to get crazier

@Hoppysjunkyardrally 2 жыл бұрын

Drill battery/jump pack on the window motor wires.. 1 way it goes up reverse wires it goes down. This was a awesome video

@2300gearjammer 2 жыл бұрын

😂 thanks I tried that once it was back at the shop and neither side worked

@Hoppysjunkyardrally 2 жыл бұрын

@@2300gearjammer I also recommend a hammer.. works every time! 😄

@2300gearjammer 2 жыл бұрын

😂🤣😭 I tried the hammer first. They run but I guess he borrow some of the tracks that connect them to the window.

@chuckhammer7862 2 жыл бұрын

Wow, Heard that cranking noise many times before, it sounds so close.

@2300gearjammer 2 жыл бұрын

That's the point where you start talking to it trying to convince it to run 😂

@boss30268able 2 жыл бұрын

The money $ exchange lol

@2300gearjammer 2 жыл бұрын

😂💰💰💰

@kennethcraig1719 2 жыл бұрын

Whoever sold you that car for $2 ripped you off !

@2300gearjammer 2 жыл бұрын

😂😂 I'm just glad I got let out of it

@kingsautonspeed 2 жыл бұрын

Fox Thunderbirds rule! Thank you for all the killer videos 👏👏

@2300gearjammer 2 жыл бұрын

Me and Trevor had a debate. I prefer 83-86 front ends but he think 87-88 TC is the best.

@homegrowncustomsandautorep9737 2 жыл бұрын

Dude best idea ever!!! I've done a fuel pump in some dudes driveway after I gave hime 500 and drove home on some t-tags!

@2300gearjammer 2 жыл бұрын

I did exactly that many years ago too and that's where I got the idea. I hoped it wouldve been that simple 😂

@homegrowncustomsandautorep9737 2 жыл бұрын

@@2300gearjammer Murphy's law

@2300gearjammer 2 жыл бұрын

🤣 especially if I'm sitting inside it.

@delcorick9967 2 жыл бұрын

Hey, progress made! Got it atleast to start n idle same day of getting it, probly needs head gasket from way it sounds,. I had an 88 turbo coupe 5 spd long time ago and that head is very heavy, but simple job though,, cool video!

@2300gearjammer 2 жыл бұрын

No doubt on that cylinder head being heavy 😂 I really forgot how much I liked these cars. I'll need to do a nice one soon.

@scrappyclappedoutfoxbody4174 2 жыл бұрын

That battery said 3/22. You’re splurging

@2300gearjammer 2 жыл бұрын

😂 my wife upped my allowance for day

@thundertc88 2 жыл бұрын

You know I’m loving the thunderbird content! Is that a rod knock?!?

@2300gearjammer 2 жыл бұрын

🐎🦅🦅🦅🏆

@thundertc88 2 жыл бұрын

@@2300gearjammer it sounded better when you gave it more throttle. Keep it pinned and you’ll be fine. 👍

@2300gearjammer 2 жыл бұрын

😂😂😂 I'm not opposed to trying that

@young11984 2 жыл бұрын

Sounded like mine when it spit the head gasket out between 2&3, little rough idle, occasional spit back thru the intake and exhaust but clean at about 1500 freespinning and 3000 up under WOT. Hit it with a 50shot one night and took out the gasket between 3&4 lol, still ran and drove it home though. Come to find out the distributor had moved and had 20* initial so that 50shot was a little hot🤣

@2300gearjammer 2 жыл бұрын

😂😂 that's 100% something would do

@wvragtopsestep2165 2 жыл бұрын

Yup typical "Road kill " fashion best laid plans go to pot .

@2300gearjammer 2 жыл бұрын

And yet I've never seen a single episode. 😂

@kilgree 2 жыл бұрын

Sounds like it has some main knock.

@2300gearjammer 2 жыл бұрын

😂 and more

@abrlynn88 2 жыл бұрын

How did you wire that IRCM?.. I NEED TO KNOW!!..

@2300gearjammer 2 жыл бұрын

I'd never done it before this. I found an internal diagram and it shows a relay just like a normal 5pin. I just jumped across pins 30 & 87

@trevorhoward6115 2 жыл бұрын

Currently trying to find a 2.3 turbo block. want to build a 2.3 for my 96 ranger! i have no idea what im doing lol, 100% youtube mechanic here.

@2300gearjammer 2 жыл бұрын

😂 well the best advice I can give is a whole lot of the stuff I do here is for a laugh. So if you doubt something make sure you put it in the comments.

@eltalleratomico7751 2 жыл бұрын

Im doing the exact same thing lol Same year and everything i got the block already just need the expensive stuff now

@trevorhoward6115 2 жыл бұрын

@@eltalleratomico7751 Im having a hard time finding a block, i can always just drill and tap a hole in a regular block if i have to i guess. The truck has a good motor, only 89,000 miles, i have no idea how long itll take me to build an engine so i dont really want to pull mine and it sit for month.

@eltalleratomico7751 2 жыл бұрын

@@trevorhoward6115 yeah i would run that motor till its dead it still has tons of life left the one in my truck is still going strong at 200k i wanna have the new one ready before it blows tho lol

@trevorhoward6115 2 жыл бұрын

@@eltalleratomico7751 oh man, no more than i drive it would take me 15 years to hit 200k miles LOL. I bought the truck to kinda have fun with, acually getting ready to paint it myself.(never painted anything in my life) should be interesting

@79beans347 2 жыл бұрын

Heck yeah man at least you got it going in a day and that alone made it worth the 2 bucks that you paid for it and it would be really cool if you...... Read more

@2300gearjammer 2 жыл бұрын

🤣🤣🤣

@79beans347 2 жыл бұрын

@@2300gearjammer 🤣😂🤣 I gotcha!!! How many times did ya try and click on it ? I bet you thought that your phone wasn't working right 😂🤣😂🤣

@2300gearjammer 2 жыл бұрын

@@79beans347 I only tried it 42 times so you didn't really get me