This is the first time to track with the new channel format. I had a blast and cant wait to do more like this.....but maybe go a little faster next time. #2300gearjammer #turboranger #Hellcat
Пікірлер: 89
@CHVLKiD2 жыл бұрын
Great day at the track, brightened up my day for sure and no automatic swap. Shifting gears definitely makes it more fun 🤩
@2300gearjammer2 жыл бұрын
😂 you know it!
@justinfahnestock5067 Жыл бұрын
Love the ranger videos I have A 97 2.3L 5-speed ranger That I would love to Turbo.. Wish you had a video install it from When it was Stock...
@2300gearjammer Жыл бұрын
I know it... I did the official Ranger turbo swap in a few hours. Later when I kicked off the channel again, I wish I had that from the beginning. The pinto will show most of it and I might get another stock ranger just to do it again
@dougmarthaler30662 жыл бұрын
That was a fun "ride along" at the track Matt. Thanks for posting...!
@2300gearjammer2 жыл бұрын
Thanks a ton. Plenty more coming. I think the next few will be dumber and funner.
@drftturbo Жыл бұрын
That infinity got lucky
@2300gearjammer Жыл бұрын
😂 I was giving all 200hp
@pissedoffamerican4869 Жыл бұрын
It's fun banging gears no matter what you drive !
@2300gearjammer Жыл бұрын
💯💯💯💪💪 absolutely! The ranger is about as fun as it gets for me.
@erasmoherrera71172 жыл бұрын
Was awesome meeting you! Usually don’t see many 2.3t rangers in the area
@2300gearjammer2 жыл бұрын
Absolutely good to meet you too! I'll catch your other message in the morning. 😂 I got a little busy today
@mattproctor75932 жыл бұрын
Good ol Shady Side!!! Love that place
@2300gearjammer2 жыл бұрын
I'm super lucky shady is very close for me now.
@mattproctor75932 жыл бұрын
@@2300gearjammer wife and I went there once met a few ppl there that r friends now. And we wanna go back. Greatest experience ever.
@trevorh80732 жыл бұрын
I have a suspicion that you visited the pickle cart
@2300gearjammer2 жыл бұрын
Only because of the hints I was getting from the pickle fairy. 🥒🧚
@devionfunderburk35312 жыл бұрын
I've been wating for this video all week been checking your page off and on thru out the day
@2300gearjammer2 жыл бұрын
Thanks 🙏 with that kind of pressure I wish the ranger would've been faster 🤣
@Nitro_John12 жыл бұрын
Enjoying the great content. Keep up the good work.
@2300gearjammer2 жыл бұрын
🦅🦅🦅
@MustangGuy65012 жыл бұрын
Great video looks like an awesome time
@2300gearjammer2 жыл бұрын
Thanks a ton! I definitely keep busy haha
@cereus572 жыл бұрын
Should have gotten a pickle! Always fun at the track especially when nothing breaks!
@2300gearjammer2 жыл бұрын
🥒🧚 I decided the golf cart was the pickle fairy. 😂
@jayfkncool4258 Жыл бұрын
I also have a third t coupe
@2300gearjammer Жыл бұрын
Thunderbird turbo coupes are my favorite. Don't tell the mustang guys. 😂
@kobracommader2 жыл бұрын
cant wait for more. I used to make fun of kids watching other people play video games, but here I am watching someone else drag race lmao
@2300gearjammer2 жыл бұрын
😂 I agree and those KZfaq channels make a heck of a lot more than the zero dollars I do. 🏆🏆🦅
@ericnelson17492 жыл бұрын
Love me some shady side
@Hoppysjunkyardrally2 жыл бұрын
brother was working that pickle cart..😅
@2300gearjammer2 жыл бұрын
🥒🥒 I don't even like em and I almost bought one just it throw away.
@Hoppysjunkyardrally2 жыл бұрын
@@2300gearjammer 🤣
@shanebarney42402 жыл бұрын
I love it you need to call it the power ranger.
@2300gearjammer2 жыл бұрын
😂 #lowpowerranger
@mefordguy2 жыл бұрын
I am so jealous. My home track doesn't have a pickle cart
@2300gearjammer2 жыл бұрын
😂🥒🏆
@thundertc882 жыл бұрын
I need to get to the track!!! I’ve never been.
@2300gearjammer2 жыл бұрын
Yes! Participation ribbons for everyone!
@jameschanley9566 ай бұрын
You got to get rid of those deep gears. Go to a 3.42 or even a 3.23 youll see a huge difference. I have a turbo Mighty MaX with a 4G63 5 SPEED. the higher gear ran much better.
@gerryseamans79712 жыл бұрын
Have 2300 w/ supercharger. And C4. Wow like to go back to standard Trans. Go to T5 or a toploader ?
@2300gearjammer2 жыл бұрын
A t5 is way easier to get parts for
@combatunion1884 Жыл бұрын
Thinking about turboing my 1999 mazda b2500 with a 2.5. Was wondering if you could do a walkthrough video of how you turboed your ranger.
@2300gearjammer Жыл бұрын
Check the other ranger vids for explanation. I'll be adding more vids for it this year.
@spiritualinsight11 ай бұрын
What turbo and engine is that. I have a 98 mazda b4000 and wanting to put a turbo in it that or centrifugal supercharger
@2300gearjammer10 ай бұрын
That's a holset hx35. It's pretty laggy on a stock 2.3 but I bet it would rock on a 4.0L
@Hoppysjunkyardrally2 жыл бұрын
Made them pull the finish line footage for that race I bet.. super close 😀 #turbo2300lyfe
@2300gearjammer2 жыл бұрын
Imagine how much cash it would take to call me the winner. 💰💰💰 😂
@Hoppysjunkyardrally2 жыл бұрын
@@2300gearjammer oh I can imagine. Because I'm in the middle of just that.. and I think we could BUY a hellcat for what we put into 2.3t.. lol
@bryanlvfr4844 Жыл бұрын
How much Boost (PSI) got the engine?
@2300gearjammer Жыл бұрын
It's anywhere from 14-20psi depending on boost control.
@Marriages4Christ2 жыл бұрын
Love your videos! Thanks for being fun and clean about it too! Do you happen to have an aftermarket 2300 Turbo Cam you wish to unload? Looking for one to put in a ported, big valve build.
@2300gearjammer2 жыл бұрын
Thanks for the comment! So far my cam choices are either stock ranger or pretty wild from Boport. Anything I manage to get, ends up being run though.
@mrbigtbonevissoc2 жыл бұрын
Talk to Chip at Big R Motorsports.
@ozzyprod9332 Жыл бұрын
Would a 2.5 be good to turbo at low boost for a daily?
@2300gearjammer Жыл бұрын
If it has forged Pistons it would be fine with higher boost or daily driving. I haven't boosted a stock 2.5 though.
@wvragtopsestep21652 жыл бұрын
Ive been enjoying the content keep it coming. PS did i miss out on the Tshirts?
@2300gearjammer2 жыл бұрын
Thanks. No I swear I'm getting back to that. Lol
@jayfkncool4258 Жыл бұрын
Boost increase
@2300gearjammer Жыл бұрын
💪💪💪
@The_Cronan2 жыл бұрын
Needs more cowbell!!! Take the bed off and take it back to track. I’d be really curious how that would affect it. You should do Home Depot lexan windows also lol
@2300gearjammer2 жыл бұрын
As little power as it had this time I think that would be a really good thing to test for science. I'm in. Let me get it fixed up a little and I'll make a pass and take a body panel off and repeat 😂
@wvragtopsestep21652 жыл бұрын
Oh put some duct tape on the boost gauge! Lol
@ellarry54412 жыл бұрын
After several replays I think you got that dodge by a bumper Does that pimp ecu have 2 step or you need something external? MSD? WOT box?
@2300gearjammer2 жыл бұрын
🏆🏆🏆💪💪🎯 The pimo has a two-step I'm just trying to make to I hit the common things people miss so they can see the importance doing them 😂
@loganmatson46072 жыл бұрын
Yes! Yes it does say pickles😂
@2300gearjammer2 жыл бұрын
🥒🧚 you've been visited by the pickle fairy. 😂
@snobros33602 жыл бұрын
I've got a turbo 2300 and the temp just shoots up to 210f - 215f with a 180f thermostat. I think my head gasket could be gone. Would you be willing to make a video where you test your engine if the gasket is gone? Or is that something you have to remove to know if its gone? Great video's lets start a 2300 track event!
@2300gearjammer2 жыл бұрын
I think that's a good vid. Usually when I bust one I fix it fairly fast and don't stop to do a video. I will add that to the list though. You might have a stuck t-stat. I don't know why but I have had probably with aftermarket thermostats all the time.
@IshTheDarkLord2 жыл бұрын
Do you know of any good headers for a 2.3T, without something wildly expensive, or should I just stick to the factory manifold? Looking at buying an engine sometime in the near future but it doesn't have an exhaust or turbo with it. Not doing a crazy build, just need something so I can drive it.
@2300gearjammer2 жыл бұрын
For the stuff I drive I really try to stay with a ported e6 manifold. I've cracked header style header I've tried.
@mrbigtbonevissoc2 жыл бұрын
Honestly, unless you want to move the turbo, a ported E6 is going to be as good (and more reliable) than any header you can fine. Avoid those Chinese e-bay headers!
@IshTheDarkLord2 жыл бұрын
Okay, I appreciate it! I figured the cheap eBay ones would be trash, just didn't know if there were any good options out there. I suppose I'll try and hunt down a E6 manifold. Thanks for the help
@itbaggedurgf2 жыл бұрын
@2300gearjammer how much torque you think a non-wc 84 T5 could take before exploding into chunks?
@2300gearjammer2 жыл бұрын
That's a really tough question. I think it all comes down the clutch choice. A stock 2.3 diameter clutch will keep a t5 alive for anything. A 5.0 swap clutch though is tricky because an aggressive clutch will bust third gear even with 200hp
@itbaggedurgf2 жыл бұрын
@@2300gearjammer I’ve got a stage 2+ from spec for the 2.3t in my t5 in my SVO, it’s rated for 425? Tq? I think, and I’m wondering if either the trans or the 7.5 ring gear is gonna explode first.
@yoursistermustang2 жыл бұрын
two things..........You know the clutch in there is good and do you have a driveshaft loop in it?
@2300gearjammer2 жыл бұрын
Ha it was good, it was actually a new clutch. Now it's hating life. 2. Not to the driveshaft loop. If I get serious it will be on the short list. I have a driveshaft history lol
@AAAComputerSolutions2 жыл бұрын
They let you race without a helmet... 🤣
@2300gearjammer2 жыл бұрын
8.50 is the rule. I recently ran something else there to know that but honestly the ranger should require a helmet at any speed. ⛑️⛑️⛑️
@young119842 жыл бұрын
Why not put a C4 with a t brake in the truck, would be intertaining for sure
@2300gearjammer2 жыл бұрын
I can say 100% certain it would not have been in the 9's if I did that. 😂
@2300gearjammer2 жыл бұрын
Also it wouldn't be able to go to the track because I'd crush it before a c4 swap 😆
@ZEPRATGERNODT2 жыл бұрын
@@2300gearjammer Damn. Thats brutal. Haha
@young119842 жыл бұрын
🤣🤣Naah it would go 9s with a C4, a brake with the right converter because of not spinning, riding the clutch and lost time in the shifts of the manual lol. Alls good, its yours and having fun with it and thats all that mattets anyway
@johnpiterbasquete2 жыл бұрын
Where is Mustang?
@2300gearjammer2 жыл бұрын
Sitting quietly. I'm holding out on that one for just a little longer. Trying to get the pinto out first.