Will it start? 90's Tracked Auger machine parked 10+ years!

Рет қаралды 261,861

2 жыл бұрын

Will it start? 90's model Tracked machine parked 10+ years!
▶️Watch spreader video here: • Will it start and driv...
💁🏻‍♂️Hamiltonville Farm MERCHANDISE: bit.ly/3pKO1aa
👕TRUEWERK CLOTHING: bit.ly/2M7wvyn (save 15%)
🔦OLIGHT: bit.ly/3CpDF50
SAVE 10% with code: HF10
🎁 AMAZON STOREFRONT*: www.amazon.com/shop/hamiltonv...
🇺🇸HOMESTEAD IMPLEMENTS: bit.ly/2MsYVCC
🥾Georgia Boots: www.georgiaboot.com/
👨🏻‍🌾 👩🏼‍🌾 Our website!
www.hamiltonvillefarm.com
🚜 TITAN ATTACHMENTS*:
www.dpbolvw.net/click-1000111...
-----------------------------------------------------------------------------------------------------------------------
INSTAGRAM: @Hamiltonvillefarm
FACEBOOK: Hamiltonville Farm
*Some links are affiliate links. If you click on the link and purchase a product, then we receive a small commission.

Пікірлер: 659

@HamiltonvilleFarm 2 жыл бұрын

▶️Watch spreader video here: kzfaq.info/get/bejne/o9eoi8eBq8yYinU.html

@johnmathers4729 2 жыл бұрын

That’s essentially a digger Derrick which is used for setting power poles and sometimes telephone companies will use them if we’re getting into remote locations hence the why it has tracks on it! The auger is for digging out holes to set the power poles and the boom actually has 2 to 3 stages like most newer ones and there are a set of claws on the front that close around the pole and the winch is used to raise the pole up and down

@raed6386 2 жыл бұрын

@@johnmathers4729 من

@cpmunson2807 2 жыл бұрын

You two guys are putting satellite TV out of business haven’t turned my tv on in weeks watching you guys instead. Your the kinda folks I would sit down and swap stories with. Love what your doing. Thanks

@HamiltonvilleFarm 2 жыл бұрын

Right on. We appreciate that.

@dawnnorris600 2 жыл бұрын

That is a 300 cubic inch ford. I'm not really a ford guy but that is one of the best 6 cylinder engines that was ever made.

@eastunder55 2 жыл бұрын

The way the engine is firing through the carb, I think the timing may be off, plug wires misplaced or valves sticking open. I wish Jonathan W wasn't so busy so you could collaborate with him to get it running. That would make some great content. I think I recall that Jonathan worked at the Carter Carburetor Company many years ago.

@mchl8 2 жыл бұрын

I watch Johnathan he's good Did you see the old mini crane Series last yr? Go back n catch that.

@jesussavescars807 2 жыл бұрын

Definitely timing issue I was gonna say the exact same thing if is has a distributor that’s the issue the cap or it’s Orr a couple degrees

@duginvirginia5737 2 жыл бұрын

You guys certainly have fun and share joy in working on this stuff together. I really enjoyed this one. Your closing comments are so true and very touching. We lost a friend due to a mishap while working on a gasoline generator; he was feeding fuel into the carb, there was a backfire and well...the rest is history, and he didn't make it. So, everyone needs to take notice of your sincere notes at the end. Thank you.

@HamiltonvilleFarm 2 жыл бұрын

Thank you very much

@tomlin7863 2 жыл бұрын

You need to clean the points on gas engine if they have been setting for awhile, it gives it better fire, plus use a a different tank for gas because it get old and usually will be dirty and plug every thing. and can cause damage inside the engine. Carter carbs are pretty easy to rebuild Ask Matt from Diesel Creek he is pretty good at it.

@mchl8 2 жыл бұрын

They fed it from the can Um I'd say half corrosion in carb + the 2 wires they pulled they weren't sure of. And if they figured the actual throttle on it. It would've done better.

@hilham89 2 жыл бұрын

I can respect your decision on this one Hank. Better safe then sorry. Y'all stay safe. Hopefully one day y'all can come back to this one.

@dr.leonardhofstadtersavage6413 2 жыл бұрын

That was hilarious, Wallie said, well it was nice knowing ya fellers🤣

@darrenwardell3079 2 жыл бұрын

Guys, I love your videos and camaraderie. A great friendship between you both is awesome to see. Now get that thing running. From a UK follower🤘🏻

@HamiltonvilleFarm 2 жыл бұрын

check out part 2! Thanks for watching!

@robertsabella7298 7 ай бұрын

Hank. My sincere sympathy to you and your family.on the passing of your Dad. Thats a very sad story. May your Dad R.I.P.

@TheIndoGod 2 жыл бұрын

I Was Born In 1996. RIP To Your Father. Sure He Was A Great Man. He Made A Great Son

@HamiltonvilleFarm 2 жыл бұрын

He was cool Cat for sure . Thank you

@jcbro86 2 жыл бұрын

This was a lot of fun to watch. No shame in throwing in the towel for the day and respecting the more dangerous things out there. I hope to see you guys come back and get that big boy moving.

@HamiltonvilleFarm 2 жыл бұрын

We do a part 2 next week👍

@chucknorris277 2 жыл бұрын

Got the same boom mounted on a 91 international. Strong as a mule no hydraulic safety features to limit your power. Great for pulling pole butts. Much better than my 2011 telelect.

@henryminton4760 2 жыл бұрын

You need to clean the carburetor and maybe clean the points/check spark plugs for spark and see if the fuel ⛽️ pump is working..

@Slane583 2 жыл бұрын

If that engine is from the 80's I doubt it has points in it. With all of the popping and snapping he probably put the wrong plug wires on the wrong spark plugs. It tried to run but it had the wrong firing order going on.

@chinbin2006 2 жыл бұрын

Hi Guys, thanks for another great video! May I make a suggestion? Check the firing order and clean the contact breakers. Unless there is a stuck inlet valve, firing back through the carb is a clear indication of incorrect firing order. Those points will be badly corroded, a quick clean will help with the coil charging. Thanks again!!!

@bjama134 2 жыл бұрын

Hank/Willey you guys are Awesome.......Having fun and living life...

@ripstephenhawking8787 2 жыл бұрын

Yall gotta come back and get this ol machine running. Those Ford 300 sixes were born to run. They make damn near a diesels worth of torque too. Great engines. Git er done boys!

@HamiltonvilleFarm 2 жыл бұрын

Stay tuned. part 2 next week.

@racer193wr 2 жыл бұрын

These engines made more torque than the straight 6 diesel that Ford had for industrial use back then.. there is a reason the 300 was used in machinery that required Ford power..

@BB-Gamaing 2 жыл бұрын

I would agree that either the timing is off a little or the plug wires are in the wrong location to the plugs ( when you pulled them off a mark on the wires would have helped you ) but if you do come back to this machine I would happily watch the video. If you don’t come back to it we’ll I’m fine with that too. Keep up the good work and we’ll see you in the next one

@davidbarnsley8486 2 жыл бұрын

What I thought was the best bit was Wally singing a boy George song That was pure gold 😍😍👍👍

@HamiltonvilleFarm 2 жыл бұрын

😂

@Worldconquer2018 2 жыл бұрын

Idk what they used them for in South Carolina but I’m in Alabama and the power company use them to dig holes for power poles that are deep in the woods and there some that come with a crane and a trailer that would pull the poles also.

@wes11bravo 2 жыл бұрын

Looks like something the line crew would use for setting poles in the right of way.

@chucknorris277 2 жыл бұрын

Yes sir. Usually they have a pin on bucket.

@wes11bravo 2 жыл бұрын

@@chucknorris277 - I'm pretty sure our line crew has a tracked vehicle like this that's shared by 2 or 3 areas - I've only ever seen it used once around Pittsburgh.

@Stoney3K 2 жыл бұрын

Exactly my thought. This machine looks like it was used to drill big holes for setting power or telephone poles.

@wolvesone 2 жыл бұрын

hank as someone that spent 8 years as a volie and someone that has been goin to fires for 20+ years i can totally see you wanting to stop when that carb ignited and i can understand your PTSD from your dad's untimely death and i am sorry for you you have my condolences i have seen my fair share of that before and yes that carb needs a good tear down and cleaning i am sure the jets are all pluged up

@jedidaddychris 2 жыл бұрын

What were you doing at Shaw Air Force Base? I finished my hitch in 1996 and stuck around Sumter. Sumter Utilities (formerly Sumter Builders) has been in business for a really long time, I believe they began running power lines back in the Great Depression-TVA govt contract-era. That auger may have been transported there for storm work and left behind, or maybe sold at auction after a time...who knows? I've been subscribed to you for awhile, it's pretty neat that you and I were at the same base. Keep these really awesome videos coming, you're helping an old Gulf War vet relax in the evenings.

@HamiltonvilleFarm 2 жыл бұрын

Right on. I’ve taking many classes and done many exercises there. Thanks for watching!

@andremeyer1449 2 жыл бұрын

I love to hear ya both talking... Such a great voice.

@Aaron-be2pt 2 жыл бұрын

4:20 - I heard you singing that Bowling for Soup song, and man it sent me on a strange couple hours through youtube. Thanks Hank!

@billbarnes1043 2 жыл бұрын

When you pulled the plug wires off you may have put them back on in the wrong order. That would be why it is popping back through the carb and backfiring.

@HamiltonvilleFarm 2 жыл бұрын

Stay tuned for part 2… you’re on to something

@yisitaadventure3266 2 жыл бұрын

Check points and firing order timing is not right there not much different to diesel principle only thay use external spark rather than compression to ignite anway that's my 2 bobs worth keep up the good work from aus

@Stoney3K 2 жыл бұрын

Ignition timing may also be off.

@jasonkuehl639 2 жыл бұрын

Hank, this video had me rolling! The humor and banter between you and Wiley is priceless! Looks like you've got a 300 I6 in that machine, they were amazing engines, and well worth revisiting. Looking forward to the next video! 🙂

@HamiltonvilleFarm 2 жыл бұрын

Part 2 out this week!

@gertjandekovel5877 2 жыл бұрын

Hank and Wally you two are the best. I'm laughing a lot a bout you two. Keep on going. God bless

@HamiltonvilleFarm 2 жыл бұрын

Thanks!

@michaelfinney2160 2 жыл бұрын

Looks like a 300HD Ford. Very good for a gas engine. Used to drive a school bus that had a 300HD engine with a 4 speed manual and it would do the job ! Have a Blessed Day !

@moman0166 2 жыл бұрын

Telect is still in business and this was a wetlands utility pole setting digger derrick. They mount the derricks on a log skidders now.

@tommyhardin8720 Жыл бұрын

It sure is amazing you guys can start all those forgotten machines.

@maxnorthouse3992 2 жыл бұрын

Clean the carb/points and spark plugs. Sorry to hear about your Dad, i lost mine in 1969 to cancer. You guys take care and great a day.

@HamiltonvilleFarm 2 жыл бұрын

Thank you Max

@kenmcfarland4287 2 жыл бұрын

This had tears of laughter running down my face ! 😂😂😂😂😂👏👏👏👏

@vaughnhill3437 2 жыл бұрын

My father god rest his soul was one of the first people to come up with the idea to mount bucket type equipment like power line trucks and other equipment on tracks thats been probably mid 70's when his company mounted its first one

@HamiltonvilleFarm 2 жыл бұрын

Interesting

@stuartkarshagen6274 2 жыл бұрын

I laughed my head off at you 2 in this video, so much fun.🤣🤣🤣🤣. Really sorry to hear about your dad Hank, I thinks that must be one of the worst ways for any person to die.🙏🏻

@HamiltonvilleFarm 2 жыл бұрын

It was not fun. I appreciate you watching!

@chuckmac6541 2 жыл бұрын

I really enjoy your guises warped sense of humor

@bevan3648 2 жыл бұрын

I watch every video, You pair always make me smile,!! Thank You for that....

@HamiltonvilleFarm 2 жыл бұрын

Thank you for watching!

@mattkubler5740 2 жыл бұрын

I love the shirt hank . Sorry to hear about your dad and God bless you

@HamiltonvilleFarm 2 жыл бұрын

Thanks Matt

@vaughnhill3437 2 жыл бұрын

Me and wally have the same mentality when it comes to that type of stuff. Just keep trying to something blows up or gives up one

@jasonstovall7849 Жыл бұрын

Sorry to hear that Hank . you and Wiley always have fun on them cool machines keep up the good work.

@HamiltonvilleFarm Жыл бұрын

👍 appreciate it sir

@davidcolesr.8628 2 жыл бұрын

Right On Time Brother,Morning Wiley & Hank. Good To See Ya !

@HamiltonvilleFarm 2 жыл бұрын

Good morning!

@bama_buck0745 Жыл бұрын

That looks like a 300 straight 6 ford motor. One of the best 6cly ever made. I love y’all’s videos can’t get enough

@alb7873 2 жыл бұрын

Last week you're singing Benny Mardones, this week Wiley sings Boy George. Will we be lucky enough for a duet next week? You can bang the Cresent wrench and Wiley can strum a dipstick!

@HamiltonvilleFarm 2 жыл бұрын

😂

@Listercurt 2 жыл бұрын

You two always make me laugh 😂 Gas engines always much harder to start when laid up than the diesels

@HamiltonvilleFarm 2 жыл бұрын

Yep! Thanks.

@nathanbrickles6387 2 жыл бұрын

For the regular truck version most electricians/telecommunications people call those line trucks because they are used to build or repair those respective lines...the foot pedal by the hydraulic controls is an auxiliary throttle control for the engine

@HamiltonvilleFarm 2 жыл бұрын

Makes sense

@stepheneddison2335 2 жыл бұрын

Love watching your comedy duo. Have fun getting this machine running.. Steve..South Coast New South Wales down under , Australia.

@ScottSillis 2 жыл бұрын

Hank and Wiley the inlet needle in the carby is more than likely stuck closed. Tap the bowl or remove it and clean it out. There could be junk in there, a whole range of issues. It would be cool to replace the engine with a Cummins or a Cat engine. Or even a Detroit screaming would be pretty cool. Maybe just a bit of research about Gasoline engines would help 👍😜 It was entertaining 🤣 I hope you come back and have another go because it would be so cool to see it driving and operating again. I love seeing old machinery running again. Take care. 👍💪🇦🇺🇺🇲

@shannonturbeville1581 2 жыл бұрын

you guys are the reason i started doing will it start

@drufuss1981 2 жыл бұрын

Good morning from Eastern Kentucky, Hank you saved my morning, I was about to get up and work on something but I got the notification for your video. Thanks for giving me something to do this morning... Lol

@HamiltonvilleFarm 2 жыл бұрын

Right on!

@danswartwood4580 2 жыл бұрын

Thank you for sharing and the appreciation

@georgelynn9737 Жыл бұрын

I really like Wiley both you guy’s are awesome really fun to watch 👌👌🙏

@FL.AirBoater Жыл бұрын

God bless you Hank an Willy!!!

@quantumhomeimprovements 2 жыл бұрын

Thanks for sharing Hank!

@bluestreak3864 2 жыл бұрын

Hey Hank Hi Wiley Hank Did Wiley Have a Nice Vacation From Aurora, Ohio

@25slider 2 жыл бұрын

Thanks Hank and Wiley for the awesome video nice machine thanks again

@friendlybill6109 2 жыл бұрын

You two guys have found one of the secrets to life - make work fun!

@HamiltonvilleFarm 2 жыл бұрын

For sure!

@jeepanimal2943 2 жыл бұрын

Sometimes the commentary between these two is as good as the will it start projects.

@aaronabney8924 2 жыл бұрын

Ive hauled many of those...37 to be exact those things are cool

@jeffreyyoung6885 2 жыл бұрын

Another great video Hank, you Guy's are the best! I just love watching you you Guy's working together, love you Guy's!

@HamiltonvilleFarm 2 жыл бұрын

Thanks much

@jeffreyyoung6885 2 жыл бұрын

@@HamiltonvilleFarm you are so welcome my brother!

@tommyhardin8720 Жыл бұрын

Wow what a old machine. Great job guy's

@woodydowler1594 2 жыл бұрын

Check plug wires you pulled them remember and it's backfires ! I like you to come back to it !

@michealgarlick6319 Жыл бұрын

Hi guys. Carby catches fire out the top hit the key and suck in old fella told that 40 years ago, check you plug leads. Cheers from Australia Mick.

@clipdigger 2 жыл бұрын

😎have checked the needle and seat of the carburetor and you can also check the float for leeks

@tommyhall8301 2 жыл бұрын

Good luck buddysgood to see yall be carefull

@HomesteadJay 2 жыл бұрын

It wasnt making oil this time... it was making FIRE! LOL

@HamiltonvilleFarm 2 жыл бұрын

Lol

@kittyztigerz 2 жыл бұрын

HEY I REMEMBER THAT MACHINE TRACKER there was ton of them use here before n it was used for power companies go thur woods cutting down tree other else thur mud n i remember seeing it before and i know ford for years and easy to fix n easy get running

@johnhicks9529 2 жыл бұрын

Yeah I'd get A rebuild kit for that Carter carburetor.& mix up some true FUEL.& add in 10% more to the 50:1 mixture then try restarting that motor.,or engine with that first after letting it sit in the float blow for 1hour then start up.

@stevevogelman3360 Жыл бұрын

You guys are killin me, one of the funniest vids I’ve seen in awhile

@bryansutherland5764 2 жыл бұрын

Love the videos you guys are very funny and very entertainment and Wally’s a good mechanic keep up the good job from River John Nova Scotia Canada

@ShowCat1 2 жыл бұрын

So sorry about your dad. God bless.

@HamiltonvilleFarm 2 жыл бұрын

Thank you

@matthewmcmenamy1398 2 жыл бұрын

The needle valve is gummed up. Disassemble the carb, don’t be afraid, it was created from the minds of men and built by men and can be repaired. Soak it in some hot water and a little pine sol, rinse it in clean water, check all your adjustments and take note of the turns. Run a small, stiff copper wire down each orfice, flush again with some carb cleaner, blow it out with compressed air, scrub it down with a brass wire brush, rinse it again, blow it out again, put new gaskets and an accelerator pump in it and BOOM!

@davekauffman8727 2 жыл бұрын

First off, I love your shirt Hank, I'm a believer too, and He does love a lot of people, including the ones that most people won't love. I knew that engine was going to run once it cranked, I-6 engines are almost bullet proof, and tough to kill. If it ran on ether, it will run on gasoline, I'm sure you would've gotten it going if you stayed on it. Figure out what closes the the top of the carburetor throat, it's called a "choke", it helps the engine pull more gas into the airstream, and that will help. Love you guys, some of your jokes are hilarious! Diesels are easier to get running, all you need is fuel, and it can be 30 years old if that's what you have.

@HamiltonvilleFarm 2 жыл бұрын

Right on man. I appreciate the comment

@martineastburn3679 2 жыл бұрын

Gas/diesel measuring stick: How about a roll up metal ruler - get a 1/4" wide and push her down the input. Dry's off. Gas is like moonshine. Some is hot and some is not.

@davidnielson1960 2 жыл бұрын

Sorry to hear that about your dad and may God be with you

@HamiltonvilleFarm 2 жыл бұрын

Thanks David.

@lewiemcneely9143 2 жыл бұрын

Sumter Utilities are around up here doing either phone or power line work. Tel-elect is power truck lift equipment, bucket truck type. Yall on your own with the rest of that stuff. GBWYall!

@Fablouscontent 2 жыл бұрын

Definitely you guys got to go back and work on that even if you have to pull out the carburetor and get it going love to see it drive

@chrisrice6856 2 жыл бұрын

Sorry about your loss. Its an early 80s motor. Linkage on top is the accelerator pump .

@HamiltonvilleFarm 2 жыл бұрын

Thanks Chris.

@dylanvervalin4798 2 жыл бұрын

That would be a Ford 4.9 300 inline 6 industrial same base as the version in the pickups with some minor changes for specific applications

@daveschroedersworkshop4479 2 жыл бұрын

Touching story about your father, Hank. Sorry to hear such a sad thing.

@HamiltonvilleFarm 2 жыл бұрын

Thank you.

@lesterjohnson3482 2 жыл бұрын

It's always the points.

@kelvinnjenga9816 2 жыл бұрын

watching from Kenya 🇰🇪

@angelina20161 2 жыл бұрын

I'm a small engine mechanic, and from my experience you should clean out the carburetor and or rebuild it if you're able to.

@vaughnhill3437 2 жыл бұрын

That telelect is a dang good machine. Those are usually mounted on medium duty trucks. Thats actually called a diigger derrick.

@cdncptanarchy420 2 жыл бұрын

There for digging post holes for hydro poles/ or core samples in the bush. hydro 1 in Ontario Canada uses ones just like these

@theknifeconnection9571 2 жыл бұрын

My dad passed in 1995. From completely diff reasons. But Sorry about your dad. Hope all is well

@busterbailey370 2 жыл бұрын

So sorry to hear that about your dad Hank

@HamiltonvilleFarm 2 жыл бұрын

Thanks much. I appreciate it

@barryshisler3720 2 жыл бұрын

Good morning to y'all from Charlottesville VA I Love watching you guys Have a great weekend

@HamiltonvilleFarm 2 жыл бұрын

Thanks for watching!

@roosthrower 2 жыл бұрын

Love the crescent wrench on the M hank, great work

@HamiltonvilleFarm 2 жыл бұрын

Thank you

@AndrewHCann 2 жыл бұрын

Excellent video Hank :) & Wiley :) also that motor be in line 300 or 305 6 cylinders Ford engine 210 hp with 260 torque and powerfull ! All do put key ignition switch on pull choke all out then push gas pedal 6 times and when crank gas pedal to floor and push choke in 1/4 dash till warm engine then 5 mins in ! Also don't stay running fuel filter clogged up dirty! Also dirt fuel that be in tank is jello and crusty too and carb get fuel from fuel pump!

@rabbit1612 Жыл бұрын

that is very sad. to hear, sorry for your loss,

@Dave-bl8ju 2 жыл бұрын

Hank, that’s one of the vehicles they use in Georgia to put power poles in the marsh

@joshcross4739 2 жыл бұрын

Great video always fun to watch you guys make me laugh 👍👍

@terencetyndall8596 2 жыл бұрын

Always check the distributor cap for corrosion fast and easy on gas engines

@daltonmusic146 8 ай бұрын

First time watching you guys and so far im enjoying your videos thank you both keep up the good work

@HamiltonvilleFarm 8 ай бұрын

Welcome aboard! We don't know anything about anything but we have fun

@angelina20161 Жыл бұрын

My suggestion is that you guys should take the carburetor apart and fully clean it out. Gas engines in my experience are sensitive to dirt and debris that ge5 stuck in the holes of the carb.

@flir67man84 2 жыл бұрын

Great video , yes rebuild the carb , have wiley sell it

@robertwills6179 2 жыл бұрын

I love it,ya'll crack me up. That counts either is fuel it ran

@jacquejecker4435 2 жыл бұрын

You are correct for having a respect for gasoline carburetors. A backfire when you are trying to bottle feed it has the potential for "problems". but you undoubtedly have clogged jets etc. in the carb and it needs to at the very least be dis assembled and cleaned but should be rebuilt tomake this thing run. For sure the accelerator pump is defective at this point. You have at least some spark since it keeps triring to start. Air, fuel and spark. You know you have two of those but you are missing a proper flow of fuel. I am glad to see you brought along a fire extinguisher. So many of these "will it start" videos show no sign of that. Be safe.So sorry to herar about your dad. that is a horrible way to go.

@woodydowler1594 2 жыл бұрын

You guys have to much fun !