▶️Watch us crank a 3406B here: kzfaq.info/get/bejne/bNOde7OG3cqoeZc.html

In 1930 Crescent introduced Crestoloy® alloy wrenches at the request of the US Army Air Corps. Crestoloy and similar alloys soon replaced carbon steel as the preferred material for the manufacture of hand tools.

Just remember Hank and Wiley: "It's rare until you find another one" 🤣🤣🤣 That's today's wisdom of the day. Awesome that it cranked up and drove! Ya'll are doing really good! I enjoy the videos! 🙂🙂

Always a beautiful sound hearing an abandoned 7.3L IDI coming back to life like nothing was ever wrong! Love your videos!

Мой любимый канал про оживление старых машин. Веселый дед и хитрый дед прячутся в лесу от жён, делая вид что заняты важными делами. А на самом деле просто играют в машинки)

DT466 WAS PROBABLY in that truck. Used from about 1971 to 2016. Still highly used as pulling engines in competition. They were referred to as "the unkillable engine." The DT stood for DIESEL TURBO. Hope this helps They were widely used in med. Duty trucks and school buses.

When all else fails:Push the clutch pedal down. Some vehicles were equipped with a switch on the clutch that prevented starting unless the clutch was pushed down. That may not be the case here, but any engine will crank over better if it isn't turning a bunch of gears churning up old oil.

It’s either a 6.9 or 7.3 IDI (in-direct injection)International diesel. T444E 7.3 engines were the electronic version of the 7.3idi.

Hank/ Wiley aka Sparky,🤣 you two never cease to make me laugh like crazy these were good ol trucks and came with 6.9 or 7.3 and were pretty darn reliable and not expensive to repair in relation to the competition, little bit of work on it and yes Hank, it'll be the nicest service truck Hamiltonville Farm has ever owned in 2022,😉😉 great as always, and Hank make sure my buddy Wiley always had his safety glasses handy on his head, don't need anymore eye issues, I know from over 40 yrs of heavy industry, Hank with no Wiley would be like Flat without Scruggs 👍

That motor is a 7.3...a V8 IH engine that was a good motor and made until 1993. I had trucks with both the 7.3 and the DT466 and they were both very good motors. The 7.3's biggest issue was the fuel pump (that sits in the top middle of the engine)...they were a little quirky and when there was an issue they didn't run at all......but a relatively inexpensive and easy fix.

7.3 idi Navistar international. Great engine, the only issue I have had in my 89 f350 with the 7.3 is the o rings on the injector return lines leaking

What you got right there is a 7.3 idi engine, they were made by international/Navistar from 1983-1994, however from 1983-1987 it was a 6.9 idi, the 7.3 idi is practically just a bored out 6.9. The idis are great engines, they will last hundreds of thousands of miles, they were really popular in International school buses and single wheel trucks just like that one, they were actually put in ford pickups from 1983-1994.5, the 7.3 power stroke (DT444E) came out half way through 1994. The 6.9 and 7.3 idis came as naturally aspirated engines (no turbo) originally, until 1993 and 1994 the company called ATS started producing turbo kits for these engines and they will make quite a bit of power with a turbo, they are all mechanical engines (the only wire needed to run the whole motor is a 12v wire going to the fuel shutoff solenoid). These were super reliable engines and were really the last of their kind, however they are well known for hard starting in the cold which is why almost all of the ones I’ve been around have an old can of starter fluid in the glove box. I actually own a 6.9 idi in a 1986 f250 4x4. It will pull a house down just not very quickly, I figured I’d share a little knowledge with you guys about em

Yep, you need to do a will it start on the crescent wrench.

Thanks for another great video you two. Nice going. Video was interesting and enjoyable. Another old unit started and running. Good going Hank and Wiley. Unit looks fairly decent, Would make someone a good unit fixed up. Should have taken that old crescent wrench and soaked it up. Might work again and be worth a penny or two. Oh my. Thanks to both of you. Enjoyable time with both of you. Take care and be safe. Looking forward to the next video. Thanks for everything. The Iowa farm boy.

Hi from uk guys👋👍 great little one with it just going straight to idle to no hunting/surging or anything 👌 be a goid little truck for someone👍 thanks for your time and be safe see you soon👍👋

We need more people like you Guy's in this world today! All the bad things going on in this world today, you Guy's just lift us right up! We all can be down and out, then we watch you Guy's, and you both put a big smile on our faces. You Guy's are just what we need today! Thank you both so very much for helping us smile. God bless you both and your families!

Great video Hank, that old truck fired right up and sounds great!

Another great video y'all. Me and my kids really enjoy you too. Always get a laugh.

You guys know how to make a person smile first thing in morning.You to remind me of my brother and myself working together.

those internationals are the best, they look basic but very good. i love the dt466 4900s, very nice truck

One thing 'bout those old girls.... They are tanks!!!! Love em

Good to see you an wiley good luck buddys

both of you guys are awesome, love watching your shows,never miss a show,keep it up, gob bless.

The dt in dt466 stands for diesel turbo.

Thanks Hank and Wiley for a great job guys thanks again

Drove a DT466 flat bed tow truck for a few years, great truck, always started and ran but gutless as heck.

I thought Wiley was gonna drive it home!

God i find myself chuckling and with a big smile on my face from start to end with you to lol 😆 brilliant content thank you

That water spicket for a thermostat in the winter👍👍 MINT😂😂

You need to market a t-shirt with Wiley on it and the caption below him, "This thing's makin' oil...".

You two are something else. Friendship is a great thing. Pick, pick, pick and nary a cross word. Keep a note pad handy, if one of you gets stung on the face or mouth like I did, you're going to have to pass notes. Recognizable speech goes out the window.

i love watching two dear friends banter back and forth ribbing each other.great content.

Every time I watch your videos it always cheer's me up brother's! keep them coming 🤟🤟

Good old 444, same as the 7.3 diesel in the Ford trucks but the DT stands for diesel turbo if I remember correctly

That was a good one thank you Hank and Whilley enjoyed it never miss one you guys made my day can't wait for next one.

I think it’s been said but DT is diesel turbo. The engine in this truck is a 7.3 IDI. I have a 1985 with a 6.9 idi, a 1992 with a DT466, a 1994 bus with the T444e and a 1995 bus with a DT466. I really enjoy working with these old Internationals. The DT466 is one of the best medium duty engines built, inline 6 with wet liners which makes for a simple rebuild. The 6.9/7.3 idi was good engines but not very powerful in these trucks. Hank you definitely need that truck! If I wasn’t so far away I’d be tempted to add that truck to my collection 😂!

20:33 now that's a beautiful sound

Such a cool little truck would look good on your farm Hank congrats on getting it going guys 👏🔧🪛🧰

Ol,Reilly he sure gets around pretty good for an older gentleman saying that politely you guys are always seem to have fun thanks for the videos

Wiley is the man!

Wiley is a genius. Enjoy your videos. ❤❤❤ Big fan from Papua New Guinea

It included the D312 (4.410-in stroke) and the D (Diesel, naturally aspirated) and DT (Diesel, Turbo) 360 (5.085-in stroke) diesels. The 400 line shared a 4.30-in bore and included the D and DT414 (4.75-in stroke), D and DT436 (5.00-in stroke) and the D and DT466 (5.35-in stroke).

Hi Hank y’all are awesome I love watching y’all videos you do awesome Job on your videos you and Wylie are so fun your huge fan Sean from Lebanon Oklahoma

Great video hank and whiley great seeing the truck start up to thanks for sharing great fun to guys enjoy watching to

Hank and Willie videos are the best!!

Great videos guys keep it up love watching these 👍🏻

Dont worry about the cresent wrench wally you can restore it. All of mine were like that. Wire wheel it go from there. Good luck my nickname was wally for years

Great 👌 video Hank and Waley

That was a ez one for a change! But I did notice that there is a DitchWitch in the background be a interesting machine to see if it starts and functions all the attachments. Be a good machine for the farm to use!!

Hi from ireland.that truck is pure class.my son drove one while on holiday in panama.love the videos guys.when are ya doing the makin oil tee shirts???

Nothing better than an old binder running again 👌👌👌

Howboutcha Hank, Are you and Wiley planting these Wrenches like Elvis? 😂 God Bless you both.

THAT motor looks like the IH motor that 1st went in the Ford pickups. I KNEW I'd seen one like that before.

Right there with ya Wiley you got my vote of confidence.

I love Internationals, and I want to build one as a project truck with the DT 360 using the crew cab from a ex DOT truck. I really want to use the DT466, but its too heavy for the GVW that I want.

I love that truck keeper

Awesome Job! For an "89 sat in for years! You can't beat a truck with a stick.

not a dt466, looks like a t444e

Hank said: it's the Rarest Cresent wrench in the world🤣

Enjoyed this video Hank. Wiley is amazing!!!

Wally's the man looks like a lot of fun collect those old wrenches

Those doors and bonnet go for big bucks !

That’s pretty cool. I live in Vernon Florida. I remember hearing his name a lot😂

very nice job and God bless yall

That OBS Ford is just like my first truck lol want her back now that I see that

Great video but I you messed up the title that’s a 7.3 idi v8

That is what DT stands for

The Wiley show and his assistant hank . keep on trucking wiley

$1.97/gallon, freakin HILARIOUS!! Those were the good old days. Another awesome video y'all. Neutral safety switch.

That is a nice truck!

Wiley is a fella that we all wish we had as a neighbor

I drive right through Vernon going to work everyday in Panama city beach FL it's a small world I'm surprised I didn't see y'all down there at some point in Vernon

2 on a row Diesel creek also put on a new video of a old international and it runs also like a champ👍😎

Hey Hank what is wrong with the green and white Ford truck and y'all be safe and always be careful doing what y'all do each and every day cause its starting to get warm keep up the good work u and ur side kick are doing

6.05 seen the king again! Thought wilye had a necklace on!

Looks like that was a great truck back in the day

You should do a will it start on that Mobius Ford truck sitting next to it. You never know you may get a buyer for it as well

DT ive always been told means Direct Injection Turbo. that 7.3 idi is NOT a dt. idi means indirect injection

Hank busted out Wiley that was the best Hank. Hank what's the diesel readback 30 years 18 months 17 days.Wiley it's the amps that juice you good lool 🤣😂🤣👍

Great job Hank & Wiley.

It got brand new exhaust pipe on it

Some of those internationals around that year. You had to push the clutch in to start it. I'm guessing to prevent trying to start it in gear. But no one would do that. Right? Lol

I have to give you 2 guys credit! Thats the best I ever seen a 7.3 start! By the way, I can pick on you guys and get by with it because this channel is in my wife's name!

Hank, you should get that rig for the channel, and put a turbo kit on that Navistar 7.3 in it! 😁

dt stands for diesel turbo 466 but not sure thats a dt 466 cause they were 6 cylinders

Another video that made or great viewing guys. Pity it did not have a tipper bro it would of made a great farm truck. Safe travels

Kool truck, thanks Hank.

Cool video. Definitely come back for the Ford. I'd watch that.

Just to say.. DT466's are Straight six's.. that looks like one of international's V8 diesels.. 6.9 or 7.3.. Awesome truck with dayton cast spokes

see what happens when elvis isint watching over wally turned into spark man. lol. fun time hanging out. cheers guys

I love watching the interaction between u two lol

Another great video guys diesel creek was doing similar truck 👍

It's easy to put them around wrong at least it let you know before it caught light 🤣😂 I did the same jump-starting my 4 wheeler lucky only blow the fuse all the best to you all

The DT466 is the same as the 7.3IDI that were found in the F series Ford trucks of the same era.

It’s usually a good show, with Heckle and Jeckle, I mean Hank and Wiley.

That is a 7.3 l 445 cubic inch indirect and injected diesel. It was used between 1988 and 1994 and 1/2 model years in internationals and a variation was used in the Ford F-250 and Ford F-350 also it also came in two variations which would be punched out in the sticker on the valve cover it was replaced in '94 by the t444e direct injected engine. The difference is the IDI injectors would be visible outside the valve cover while the t444e injectors would be under the valve cover and are electric over hydraulic actuated. the seven three IDls put in Fords used a adapter plate to mount the Ford transmissions to the engine so not many components will interchange between the international and Ford variants.

Enjoyed!!!!!!!!!!

You should buy it Hank it will make the videos era like you could do a lot with that service bed

Man, ya-all need to carry a cordless leaf blower in ya-all peecup !

Another successful job!