Will It Start? We Gotta Get Landon's Square Body Back On The Road.

Рет қаралды 367,742

Жыл бұрын

#fabrats #gmc #fabrats
Landon's truck is due to drive out of the shop! Just a couple more things to go to get it up and running. Check it out!
Make sure to follow along with us as we build and fabricate cool stuff!!
We LOVE Onx Off-Road! Get 20% by using code FABRATS20 or click on this link:
webmap.onxmaps.com/purchase/o...
Get your own Fab Rat's Apparel Here:
www.thefabrats.com/
More videos you'll love:
Landon's GMC squarebody build:
• Landon's Old GMC Truck
It Finally Arrived! The Rat Rod Wrecker Gets A Special Invitation
• It Finally Arrived! Th...
After Disaster Strikes, Ben Gets SURPRISE Of A Lifetime!!
• After Disaster Strikes...
There's Only One Thing Left To Do Now That The FJ45's Is Fixed!
• There's Only One Thing...
All Of Our Rigs Are Going To Be Broken After This Sketchy Recovery!
• All Of Our Rigs Are Go...
We love Barnes 4x4. Check them out!
www.barnes4wd.com/?ApplyPromo...
Check out Fab Rat's Recovery Gear by Yankum Ropes!!
yankum.com/products/fab-rats-...
Use coupon code FABRATS at checkout to save 10% on your order!
Follow us on Instagram: FabRats
And THE FAB RATS Facebook page: / thefabrats
For business inquiries please email us at: thefabrats@gmail.com
Shipping Address:
Fab Rats
P.O. Box 234 or General Delivery
Glendale, UT 84729

Пікірлер: 514

@christopherconrad4156 Жыл бұрын

Tweak that pedal so it hits the floor before landon hits redline.

@Beandiptheredneck Жыл бұрын

I was coming to say the sane thing 😂 might save replacing another engine

@paulrivers7248 Жыл бұрын

Been thier done that lol and my son couldn't figure it out then a few yrs later I finally told him the secret dad trick that I had done lmao so now he can maybe do it when he has kids and then pass it on down 🤷‍♂️🤷‍♂️😁

@timothycarey3883 Жыл бұрын

Just screw a thin metal block to the floor under the carpet so he can only go 80% throttle.

@thedumbassspeaks Жыл бұрын

A Hillbilly governor! I love it!

@Jan-pw4po Жыл бұрын

Tennis ball under the gas pedal

@TheTuttleCrew Жыл бұрын

I will never understand why my family and I enjoy watching you guys work on vehicles all the time???? I can't get my wife to stay in the garage and my daughter has no interest in 4x4's but it's great that each new video has my wife, daughter, and 3 sons and I all together on the couch as a family. Thank you Fab Rats for keeping it family friendly!!!!! God bless you and yours real good!

@Patrick.Weightman Жыл бұрын

2:57 never thought I'd see a hitmarker here 😂😂

@chrisantoniscountryman-pur9954 Жыл бұрын

Good morning Fab Rats and fans!

@lorenmeyer5290 Жыл бұрын

Good morning Fab Rat's! Love watching and laughing with you guy's!

@sickjohnson Жыл бұрын

I'll say it again, Paul you really love your kids man...mad respect because that is an insane amount of work into that truck. Good parents are the rarest and most valuable thing on this dirt.

@jeepsandjalopies Жыл бұрын

Always glad to see a FabRats video get posted

@danielshoemaker4935 Жыл бұрын

Looks like you found a new editor. It’s just a little different style than normal

@williamboggess6893 Жыл бұрын

Shout-out to whoever adds the "while we're working" music good job

@dalegereaux1863 Жыл бұрын

Somewhere as he watches you put pieces and parts together to bring a truck back to life, Dr. Frankenstein smiles. 😁👍

@jerrymestas1231 Жыл бұрын

Four dudes staring at an awesome motor after it was started!! Like kid in a candy shop, great job to all of you👊🏻

@genesiedenburg9798 Жыл бұрын

Coffee and fab rats, great start to a beautiful day 🇺🇲

@joeglynn3916 Жыл бұрын

See you got your New Editor. GreatJob!!!

@1jimif Жыл бұрын

Hey Landon, That's 1 cool machine! I love the old square bodies, especially with a step side bed! Can't wait to see it on the road, or actually off the road!....Peace...jimi

@joser.mendiola1602 Жыл бұрын

Nice touch with the math formulas and the X-File sound track 😊

@georgevindo Жыл бұрын

I'm glad you guys have so much fun in the shop while getting things done. Thanks for the video Michelle and crew.

@markkeyser Жыл бұрын

'Throwin' the wrench reminded me... High School 1967, working on a 1963 Triumph Herald (the predecessor of a Spitfire). Classmate, Dennis O'Brien, was sitting in the car 'tapping' on the bezel of a Smith's speedometer. "Dennis, don't do that! You're going to break the glass!" Tap, tap, tap - CRACK!!!!" Dennis glanced at me, hopped out of the car and ran. I picked up a 13mm box end wrench and let it rip. Square in the back of his head - THUD!!. 56 years later and I wonder if the 'lump' is still showing?

@bernhard8540 Жыл бұрын

Those guys need those hard hat baseball cap inserts as much as they bang their heads under vehicles haha❤❤

@andrewcooper8980 Жыл бұрын

Look at Landon, he’s excited getting right in there helping. He’s a good kid

@rdratc633 Жыл бұрын

Video quality is off the charts good! Thanks Hunter!

@timothybailey7118 Жыл бұрын

I know the real value of the “Landon’s Truck Build” is great content tor the channel but I hope someday Landon understands how great his dad, uncle Ben and Sean are for working on ‘his ‘ truck…and that he can express that appreciation in a meaningful way.

@joesepspindel3335 Жыл бұрын

I didn't have a dad. I bought things I could afford and researched how to fix them but when something happened that I couldn't fix because I didn't have the tools, money or knowledge I had to let it go for a fraction of what I bought it for. I never could get a break. Best car I ever bought is my 2006 scion XB. I've had it for over 13 years now and it never needed much work at all.

@richardthomas1743 Жыл бұрын

Gooooood morning everybody and thumbs UP to Fab Rats!

@TheBloatedPony Жыл бұрын

Absolutely love seeing all four men with the common goal of making that truck run, watching it fire right up. So fun! Another good one y'all.

@brettmillett3851 Жыл бұрын

Only discovered you guys a few months ago but your channel has become one of my favorites. Not only do you guys do a terrific job of filming and editing, I really connect with you guys as another guy who grew up on/near highway 89. Keep up the good work! And…even though I’m a different religion (Ford guy 😂) I love me a good square body. 🙌

@stinkhammercow Жыл бұрын

😊😅 j

@stevehaken Жыл бұрын

Well done! I remember my Dad helping me with my projects in the garage. The memories will last forever.

@alfonsoalonzo Жыл бұрын

the little clank of defeat was kinda funny with the gas lid at least it still worked even with opening on the other side

@frankportigiano1910 Жыл бұрын

Love the split screen action and the rapid wrench/ socket action. Definitely gonna be a Cool Truck when it's finished

@jeffshafer7269 Жыл бұрын

Hope the son appreciates dad building his truck. I like it. Didn’t happen with my dad.

@larrydavidson3402 Жыл бұрын

Making progress on Landon's truck soon he will be backing it out with a big smile on his face.

@rolandtb3 Жыл бұрын

Landon's beaming. That truck sounds good. No leaks.

@johnbarletta5680 Жыл бұрын

Ben is the essence of man, there should be no episodes without him. When the lord returns to earth he will seek Ben's advice.

@larryhall6416 Жыл бұрын

Talk about two brothers that are so talented. Ben and Paul are truly blessed by the hands of God with so much talent. God bless Fab Rats 🐀 😅

@jessestevens8768 Жыл бұрын

The x-files music when Paul was thinking was great lol

@calvinlevie943 Жыл бұрын

Excellent video keep them coming cause there great thank you, very good with the video's Michelle keep this bunch going

@davidkelly1038 Жыл бұрын

Man, seeing y’all work on these ole square bodies reminds me of an old 83 Chevy 4x4 that I had. It was a swb with a 4spd 350. I sold it in the early 2000’s for next to nothing because the motor wasn’t running at the time…and I needed money. I love the old square bodies!! I kick myself every day for not keeping it.

@The805KC Жыл бұрын

You guys are awesome and the split screen with Paul and Ben is cool to watch. Keep up the great work

@markcaldwell1245 Жыл бұрын

It is great to see family working together. My family would be all fists and foul language, lol. Awesome job everyone.

@davebaker489 Жыл бұрын

The money and time some dads will spend to save their sons $$ money $$. With luck ... the lessons learned will be priceless. Good work "family" .

@jamesdavid5997 Жыл бұрын

Laydon is a lucky kid to have you all, family, getting his truck race ready.... Now he's just gotta go easy on the gas pedal and keep that old girl rolling. Good luck!! Cool truck for sure!!!

@donalddarbonne779 Жыл бұрын

Michelle, your editing and music selections are top notch.

@shannonkoelbl909 Жыл бұрын

Love the splice-ins from movies

@om617yota8 Жыл бұрын

Paul, you're awesome. It would be an honor to shake your hand. Zero percent chance my dad would have helped me build a truck, even if he'd had the skills or tools, had to figure all that out on my own. I hope your kids properly appreciate all you do.

@k13ehr Жыл бұрын

My dad would have been more likely to wreck it after I'd built it out of spite.

@HAHA.GoodMeme Жыл бұрын

Our boomer dads were so terrible we have to learn this stuff on youtube.

@jimedge8301 Жыл бұрын

My Dad didn't help me on anything ,but then I have never felt entitled to the point that I would bad mouth him on a you tube video,my father did the best with what he knew. Miss you Dad 🙏 RIP. Hey Paul keep up the great content 👏👏👏

@om617yota8 Жыл бұрын

@@jimedge8301 Glad you had a good dad otherwise. My comment was definitely meant in the spirit of appreciating the gifts Paul is given, not badmouthing my own dad. That said, the shoe certainly fits, and I feel no shame in saying so.

@jimedge8301 Жыл бұрын

@@om617yota8 sorry if I offended you with my comments,it was directed more to the others bashing their " boomer dad's" my father wasn't the best trying to please 7 kids and I never felt he owed me anything, I just knew I wanted and tried harder when It came to my children,so as not to repeat the same mistakes he had done.

@thomasmurphy5906 Жыл бұрын

Landon's step side short bed square body pickim up truck is turning out super sweet

@nighprw607 Жыл бұрын

. You guys have to realize many of us had dads who never worked on cars, tools. No shops around to hang out with cool dudes learning things. Paul and Ben just make up a plan, start drilling holes, welding and it works! Poor Hunter seems to take a lot of ribbing about his truck but gets his zings in also. Good group of people working as a team.

@albertorozco5981 Жыл бұрын

Paul , Ben .etc ..there all really good guys ..great videos to watch with the family anytime. 💯

@utahjohnnymontana3373 Жыл бұрын

the X Files music...love it. When it started up, everyone in place...its like a NASA program running down the checklist. :D

@randyhoffman3283 Жыл бұрын

Hunter is coming right along!

@trail-wolf4x4 Жыл бұрын

Hmm maybe title should be "Eviction Day! Landon's Truck is getting Out"

@JMG_Aerial_Imagery Жыл бұрын

Great video!!! I cant wait to the next video when we all figure out that with the tail light back on the gas door will not open all the way.

@xfactor5876 Жыл бұрын

This channel has put together some really cool rigs, but this one is my favorite build. Just a clean ole square body that is turning out cool.

@catman19 Жыл бұрын

Hey Paul,, instead of cutting & welding the gas door, why not just switch fenders, left for rite

@ryb6463 Жыл бұрын

&Michelle -your edits are getting really good. 👍🏻

@01WantedMost Жыл бұрын

love the split screen!!!!

@jamesbigham9036 Жыл бұрын

Good morning you guys definitely made a lot of progress on Landens truck. I am sure you guys will figure out the issue with the bed.

@TheOldaz1 Жыл бұрын

Good progress, he'll be a happy boy when it's back on the road.

@bernhard8540 Жыл бұрын

The truck is coming along great ❤ im sure landon is excited to drive his truvk again for sure❤❤ Ben the trans grease is made so that once the trans fluid warms up that specific grease will warm up and turn into trans fluid ❤❤❤ thats whats special about it but not a lot of people realize theres special grease for inside transmissions but you did thats good, it means you know the proper stuff to use for different parts❤❤❤

@keithreilly386 Жыл бұрын

The rumble of a flow master beats the heck out of the obnoxious sound of a glass pack

@paulhall170 Жыл бұрын

Grandma Lolly chucking Hunter under the bus, classic!!! Paul: "Who'da thought a throttle pedal could be so hard to do". Hunter; "I'm finding it entertaining!" Hunter your camera work has improved in leaps and bounds, keep at it, mate!

@1944chevytruck Жыл бұрын

good job everyone!

@patrickduley405 Жыл бұрын

Spring has sprung working out in the shop. You all are my night time show until winter

@TxRiderDave Жыл бұрын

Great progress. Lots accomplished. The squarebody will be running and whoopin’ on Hunter’s truck soon.

@larryharney8093 Жыл бұрын

Great to see a young man protecting his hearing. Once you lose some, you never get it back.

@steelmill Жыл бұрын

Nice job on Landons pick up.I have a feeling if he breaks it this time he's going to fix it himself.

@nedharmon9135 Жыл бұрын

Duck Dynasty has nothing on the Cox boys. Dang I am so envious of you guys working together like that and having fun doing it too. I always worked alone. I didn’t mind but the help would have been nice and fun too.

@theburtseoni Жыл бұрын

Landon is such a fortunate young man to have such a team as his dad, uncle and other relatives backing his project up with real help. And Landon's folks are very fortunate to have such a fine young man for a son!

@MrBillsfishin Жыл бұрын

That is going to be one heck of a nice truck truck when it is done. Very nice build gentlemen.

@keytonaustin2602 Жыл бұрын

Paul maybe I could teach you something when you do braided lines tape the end before cut and the tend to stay together better and you don’t poke yourself as bad try it next time!!

@dennisdain987 Жыл бұрын

Great work done by all members of the team.

@donaldfrazier5244 Жыл бұрын

Sunday morning coffee and a fab rat video,can’t miss with that combination!

@DasKroenerTier Жыл бұрын

There is one thing I always notice... Paul: Owns a nice Plasma Table with automatic cutting mode Also Paul: Always cuts his Parts by hand :D

@anthonylee2099 Жыл бұрын

Great job Paul, Ben, Sean and Landon. It’s slowly coming together. First crank start up. Kool! Hopefully Landon will have a kool head on his shoulder and Not be Over Zealous with the Power the LS has! We’ve All been young before! 🤙😎

@DownNDirty_OffRoad Жыл бұрын

Going to be a badazz square body when it's done!!!💪

@Farm_fab Жыл бұрын

Paul: "got a lighter ?" I'd hate to see him make a fuel of himself.😁

@jasonkonopa6134 Жыл бұрын

I seen a pretty cool trick that a custom shop did find an old steel gas can cut the bottom out, cut a hole in the bed the same diameter weld it to the bed put a fuel neck going up to the lid of the can pop the top fill your tank up

@lchebuhar9212 Жыл бұрын

Lando is looking happy ! 💪👍🏼

@darinhassett4708 Жыл бұрын

been watching you guys for about a year plus I'd love to have a shop like yours... love the work

@CORNDODGER Жыл бұрын

Wouldn't WE ALL !!!! Just to have a LIFT a PLASMA CUTTER AND A TIG hell I could I build a HYPERCAR or a cool go kart at least

@zippycfpv3619 Жыл бұрын

Flipping down the fuel door would’ve been wicked cool!

@CptBlackbeardlives Жыл бұрын

You all are spoiling the kid. When i grew up I did all the work on my car and paid all exspenses, parts, fuel, insurance etc.

@kimetherington2252 Жыл бұрын

Another great video, Fab Rats getting er done, well almost! Til next time, take care, stay safe, and we'll see you on the next...

@olivermaryjane6577 Жыл бұрын

That’s your skid plate? YEp… hahahahah that silence said it all.

@drewfleming7065 Жыл бұрын

Hey Ben...dont forget the dielectric grease on those plugs...really helps keep water out and easy of separating the plug later...

@sethcrawford6219 Жыл бұрын

That boy reminds me of me. I put three motors in one truck within two years

@danaowen9014 Жыл бұрын

A whole pit crew working on landon's truck, he must be some one important,😃, you are landon, 👍

@JamesFAFOCreel Жыл бұрын

Of course it’s going to start. You guys are giving it TLC. It will 🏃‍♀️ ☘️

@bernhard8540 Жыл бұрын

Haha you can tell ben has kids with his really good hearing haha ❤❤

@marvincarter870 Жыл бұрын

Welcome back Paul, Ben, sean and Hunter. Lot's to do getting Lando's truck out of the shop and back on the road. It's going good and moving forward and it runs! Which makes me wonder about how the new shop is coming?

@rhondasweeney7271 Жыл бұрын

Awesome job that everybody has done. Can hardly wait until it's completely done in Landon will have his pick up back

@saintracheljarodm.holy-kay2560 Жыл бұрын

Well so close but yet so far....have a good week and God bless amen.

@JanelleVocate-Ames Жыл бұрын

YAY!

@mikecallan8346 Жыл бұрын

Tip: Cool your body metal down with an air blow gun while your welding to stop the metal from warping so bad from heat!

@joshg8458 Жыл бұрын

Could always put a body lift under her to clear the gas neck. Then you could get bigger tires!

@rmarsh8082 Жыл бұрын

About time that poor kid has a capable truck !!! Congrats Lando (sp?)

@user-ij8wf6cz8u Жыл бұрын

Really enjoy watching you guys I have a ton of square bodies myself always doing similar stuff . I was just thinking it probably would have took less time on the gas filler door if you would have in bolted both fenders and swapped sides . Way less welded and body work . Keep up good content.

@joesphbest3120 Жыл бұрын

Another wonderful job by the Fab Rats the best team I know.😁

@brockness7133 Жыл бұрын

Y’all gotta get us a video of a “build breakdown” of the ol’ wood truck ASAP!!!

@MrJest2 Жыл бұрын

LOL!! You sure can tell they are related. When Paul was putting the accelerator pedal in and said, "This is not very user friendly"... he sounded _just like_ Merlin...

@TonyKGent Жыл бұрын

going to be fun putting gas in with the taillight in the way and it flipping out :P I love watching Paul's ingenuity though.

@bp9027 Жыл бұрын

Video editing skills are substantially improved…. More like a TV show than a KZfaq channel now…

@mr_mongo7228 Жыл бұрын

Those Flow Masters sound great I have the Flow Master X cat backs on Challenger and it wakes up the neighbors! Landon is a lucky kid having his dad and uncles building his truck for him. ❤😂

@jerryscott253 5 ай бұрын

It amazing how you are with your boys glad to see how they respect you Mr. Paul I got a autism son who loves to build stuff it just amazing watching yall keep the good work up