Will This Work? Bent Bucket Cylinder, Trying 270b cylinder. John Deere 1025r 260b Backhoe

Рет қаралды 55,169

2 жыл бұрын

How to replace the backhoe cylinder on the John Deere 1025R. Video sponsored by SimpliSafe. Visit simplisafe.com/ttwt to learn more and to get at least 30% off your Simplisafe security system!
1025R/260B Bucket Cylinder
www.greenpartstore.com/produc...
bit.ly/3AP4izv
270B Bucket cylinder (the one I used on the 260B)
bit.ly/3BKkTWx
Viewer Bruce's links for the Surplus Center choices:
Full Extension, a bit short on curl...
bit.ly/3vfvEh4
Full Curl, but a bit short on extension:
bit.ly/3aEV9yS
Tractor Time with Tim Information:
Website: TractorTimewithTim.com
Favorite Products: amazon.com/shop/TractorTimeWit...
TTWT Merchandise: TractorTimeWithTim.com/shop
Facebook: / tractortimewithtim
Sponsors:
Ken's Bolt on Hooks
www.boltonhooks.com/
Use Code TTWT for 5% Discount!
Heavy Hitch: heavyhitch.com/
Use code TTWT for 5% Discount
Ariat Clothing and Shoes:
Save 10% off your first order ariat.dkkdet.net/c/2762758/69...
Tim’s Favorites - ariat.dkkdet.net/c/2762758/10...
John Deere 2038R, 5075E, & 835M HVAC Gator
AHW LLC John Deere Dealership
www.ahwllc.com/
John Deere Parts
www.greenpartstore.com/ttwt
Use code TTWT for FREE Shipping
Baumalight 1P24 Stump Grinder
shopgreendealer.com/ttwt use code TTWT for 5% off!
ISOtunes Bluetooth Hearing Protection
bit.ly/3xnc2rS
Use code TTWT to save $10
Artillian (Curtis Cabs)
Grapples, Pallet Fork Frames, Snow Plows, Canopies, ROPS Mount Accessories
www.artillian.com/
Precision Grapple
agfolks.com/
5% Discount Using Code TTWT
Rhino Ag
rhinoag.com
Lube Shuttle
lube-shuttle.us/store
Use Code TTWT for 5% Discount
The Original Tractor Cab
www.originalcab.com/
Use Code TTWT for 5% Discount
Bucketeer loader attachment
bucketeergear.com use code TTWT for 5% off
Hydraulic Supplies
discounthydraulichose.com/ttwt use code TTWT for 5% off
Hydraulic Valves
summit-hydraulics.com/ttwt use code TTWT for 5% off
Deck Dolly Mid mount mower storage solution
deckdolly.com use code TTWT for 5% off
Limbsaw
limbsaws.com use code TTWT for 10% off
Terra King TKV20
Mention TTWT when placing your order at terraking.com for at LEAST 5% off on your TKV20!
PTO Link
tractorptolink.com use code TTWT for 5% off.

Пікірлер: 270

@TractorTimewithTim 2 жыл бұрын

Visit simplisafe.com/ttwt to learn more and to get at least 30% off your Simplisafe security system!

@OrangeismyNewGreen 2 жыл бұрын

“If you buy the OEM cylinder you’ll be broke faster” omg 😂😂. Have a great weekend to you both 🙋🏼‍♂️🙂👍🏻

@terrytolar1749 2 жыл бұрын

Bent the same ram on my 485 backhoe. Had a hydraulic shop rebuild the cylinder, and they used a stronger rod material for the ram. Cost to repair was less than 1/3 the cost of buying an OEM replacement.

@damianzanolli1845 2 жыл бұрын

If you ever have to move a new Cylinder again without any fluid in it, you can put compressed air to the fitting to make it move easier. Love watching your videos and the projects you do with your equipment.

@timraber6575 2 жыл бұрын

I find the repair videos just as informative as the working ones. Most of us older guys have the gene that if we break it, we can and must fix it. I know I’m like that. I had to replace the engine on my zero turn early in the season. I tried to repair it, but quickly went past my knowledge. Sometimes I just have to accept that fact. During operations, you have already questioned the move that bent the cylinder. I question what I did to make my engine fail. Like you said…… If you use the equipment, something will break. My equipment is not barn queens.

@kdegraa 2 жыл бұрын

Tutorials like this are amazing. My mechanical knowledge is minimal so when I’ve had issues here and there I’ve looked up how to’s on the web to do what is needed to be done. My tractor doesn’t have a backhoe and I never plan to get one. However it’s interesting to watch working in a piece of heavy equipment.

@TractorTimewithTim 2 жыл бұрын

Yes, most of these techniques will work on many similar tasks.

@Kcolby47 2 жыл бұрын

I’ve beat myself up from time to time after breaking something, and second guessing myself. But as you mentioned “if you’re going to use things something will break.” I appreciate your calm demeanor and practical and methodical approach. A pleasure to watch…and learn. You two are a great team! Blessings.

@ProjectsWithPat 2 жыл бұрын

Great job explaining the difference in power between the two cylinders. I talked with Christy about that at the utility show. Another top notch video Tim

@rjmack3790 2 жыл бұрын

As always good stuff Tim. Thank you for continuing to break your stuff so the rest of us can learn what NOT to do. And for those that missed the video where stuff got broken, hopefully they will find the videos of you fixing... Its nice to see KZfaq being utilized for GOOD things. Keep the videos coming Tim, I look forward to each and everyone!

@westtoast74 2 жыл бұрын

Well done. Another great video of the ups and downs of owning and using a tractor. What separates your channel from the rest is your in-depth process on how to repair it yourself. Thank you.

@neilschuette2346 2 жыл бұрын

I am always impressed with your ability to fix and install things.

@treemonkey_ma1718 2 жыл бұрын

I bent my steering cylinder rod on a root! At the time, it was $630. After replacing it, I brought my old one to a hydraulic shop and they replaced the rod for $130. Now I have a spare.....

@dngendron 2 жыл бұрын

If you’re making the video it probably works… Let’s Go Brandon!

@andrewwensel6294 2 жыл бұрын

Let's Go Brandon!

@liketolooker 2 жыл бұрын

Let’s go Brandon!

@powrguy1696 2 жыл бұрын

"Let's go Brandon"

@leokelly359 2 жыл бұрын

Let’s Go Brandon!

@gidzey4783 2 жыл бұрын

Lets go Brandon!!!

@ritterjon 2 жыл бұрын

💥 I remember my dad bending that same cylinder on his then bh70 backhoe. Think it was around $400 or so. That was years ago and happened twice. Not cheap for what it is. *Keep on tractoring!*

@donaldstrishock3923 2 жыл бұрын

Hey Tim good job on "souping up" the digger. All this talk about "cylinders" l laboriously looked into the 216 comments & nobody noticed "something" DANGEROUS in the room!! The oxygen CYLINDER in the background is not tied ,or Capped--- Danger-Danger. We want you around Mr Tim, you too Christy! Just thought you would like to know, "Brother". GBWY.

@DUSTEATER2 2 жыл бұрын

Yesterday I bent the end of a fork using my loader on a pile of telephone poles...Your video softened the pain. THANK YOU!

@frankjones5283 2 жыл бұрын

Most of my time on the internet is trying to find the lowest price and if that one will work. That`s where buyers reviews and technical blogs can really help. Knowledge is power. Thanks for sharing your knowledge including mistakes.

@dwayneloftice2326 2 жыл бұрын

Great review Tim & Christie. Can always count on your unbiased and detailed review. I don't have a backhoe and never plan to own one. But that's why a mini-excavator is so attractive at rental rates.

@goforit5844 2 жыл бұрын

Really really look forward, to the in-depth repair videos - We all make mistakes, where we unintentionally cause damage to our equipment - Seeing exactly what it takes to not only make repair, but to make repairs in a way that makes it even Better than it was before the Uh Oh, is so very helpful - and, keeps us from possibly even making that Same mistake in the first place… So, we owe you a Heartfelt Thanks…. The repair videos, are a welcome addition to your normal equipment-in-use demonstration videos…

@ericlaker1983 2 жыл бұрын

You know when ever a mistake happens .this thing happens. Learning! Thank you fur passing on the costly learning information Tim! You surely will have helped someone I'm most certain!!.

@Mitalayeka 2 жыл бұрын

Its been fun watching u guys work, thanks for the video guys.

@buildingalegacypa 2 жыл бұрын

Thanks for the video, you made the replacement process look easy!

@philsmock4943 2 жыл бұрын

Yep, I have a tendency to break or bend stuff myself. So I feel your pain. Good idea going with the bigger ram and it looked like a prefect fit. Thanks for sharing.

@dennisschluttenhofer4321 2 жыл бұрын

Tim, I also bent mine on my newer 1025R (same version same as yours). My dealer in Monticello IN replaced it under warranty so I was only out the downtime and travel. But I am of similar mind; bend it once and it will bend again, sooner or later. So I've been investigating replacements; you video was timely! BTW, the original 260B bucket curl cylinder does not retract all the way before all the 'slack' is consumed. Because of this, the extra 270B length is small enough it becomes insignificant. Also, it does not extend all the way before the double pin bracket stops it, so either cylinder will put the bracket curve to the stop metal. Happy tractoring and God bless, Dennis

@hughhead9079 2 жыл бұрын

First, THANKS for doing real work in order to break it. And double-THANKS for sharing the best way to fix it.

@fsj197811 2 жыл бұрын

Nice simple upgrade, thanks for sharing. 😃

@jimhale4615 2 жыл бұрын

In July of this year I bent the cylinder on my dipper on the 270B backhoe, doing stump and root removal. Just like you did. Didn't know it had bent until after I got it untangled from the roots. Bent worse then yours. I have a pic of it. I also had a leveler cylinder leaking. Ordered the parts to repair vs replace. Around $600. Tried for two days to get the dipper cylinder apart. I'm in my seventies. Couldn't do it. Called the shop and dropped them off with the ordered parts. They took just over a month to fix them. When I picked them up they told me the ordered parts were wrong except for the rod and take them back to the shop where I paid for them. Also they had to replace the piston for the dipper cylinder, that was why it took so long. It cost just under $600 for the shop repair for the two cylinders. Got a $300 refund for the returned parts. I checked into just replacing the dipper cylinder before the repair. It was just shy of $1200 plus tax and shipping. So I got two done for around $900. Still ahead of the game!!

@geraldhaury4199 2 жыл бұрын

I don't like the cost of the new cylinder, but I am very glad to see that it isn't a nightmare to replace. Thank you for showing us!

@danielclapp636 2 жыл бұрын

Speaking of snapping pliers. I was in the same situation as you, crappy pliers so I shopped around and found some inexpensive “GLARKS” brand pliers. They came in a kit that had internal and external pliers plus different angles of tips. Completely happy with them and have had no issues with them. Take care and don’t break to much more stuff. Central Maine Dan.

@earlyriser8998 2 жыл бұрын

it is interesting to watch the repair. Your comment about feeling like an idiot is so true. I feel like that every time I fix somethig I broke...unless it is something that shouldn't have broken.

@philhart8864 2 жыл бұрын

Hey Tim really enjoy your repair videos. Help when I may have to work on my tractor. I know the cost hurt but it help your viewers to do their own work. It would be great sometime to maybe point out what all the extra wire plugs. On the back of the tractor can be use for. Thank you for your videos.

@houndsmanone4563 2 жыл бұрын

Sorry you had to spend bucks on a repair, Tim but you got some great useage from the original cylinder prior to ram malfunction. Enjoyed all your advice and yeah, even the mild whining was fun. Wishing you the best using your new cylinder an thanks for the educational information. I had not changed a cylinder and hope I don't have to either but I hope to use the same logic as you when doing so. It's always a pleasure to watch your videos. I always learn something new. Have a blessed weekend, my friends. 👍🏽🙂

@davidkuznetsov9316 2 жыл бұрын

this happened to me on my massie 1723e tlb massie had a recal on that same cylinder when they replaced it the new cylinder shaft diameter was 1/4" thicker I'm happy with the fix

@workingmanrondoyle3287 2 жыл бұрын

Great video on your repair 👍 . I'm not sure if you'll knows this but black zip ties have the best rating for sunlight exposure. One step up for that simply safe security camera on a flagpole would be a stainless steel band clamp. God bless you both! I hope you have a wonderful day 🙏

@terryhelms1578 2 жыл бұрын

Thanks, love this video, John Deer is on strike, may get tough to get parts, I suggest take it easy Tim.

@d.a.ballou9740 2 жыл бұрын

You make it look so easy.

@109jacosta 2 жыл бұрын

Tim, when we set up a backhoe or excavator with a hydraulic thumb, We always turn down the pressure relief on the thumb so the bucket can overcome and push the thumb open. That helps prevent damage to the thumb and bucket cylinder.

@mikejohnson7181 2 жыл бұрын

Tim, had the exact same thing happen with my bh70 backhoe. Contacted JD for a price, about had a heart attack, so I took it to the local repair shop and it seems to be working fine. Maybe it's time for JD to issue a recall for an undersized cylinder.

@PineyGroveHomestead 2 жыл бұрын

JD is back in business and ready for more stumps. BTW...your shop is way too clean!!!

@RCPSU4 2 жыл бұрын

I found this interesting with using the 270B cylinder over the 260B replacement and seeing the results. I think the ripper should work just as well when you put it on for the next time.

@geoffhubbard7815 17 күн бұрын

It took me a minute to make sense of your statement about less retracting power; then I realized that you've lost square inches by keeping the outer cylinder the same while increasing the ram size, thus losing the difference in what's left to push... (I prefer PI equations that have apples and cinnamon. :-) ) thx for the work!

@stevesmith-wc2gb 2 жыл бұрын

I have that same impact driver it used to be hitachi but now it’s Metabo hpt and I love it

@David-lh1vp 2 жыл бұрын

Something that is drilled into my head at work is to wear your safety glasses. could save you an eye when a hydraulic line has pressure or when a snap ring goes sailing. And knipex is also a fav tool brand in the aviation industry.

@Mr42960 2 жыл бұрын

Great information for us 260 owners, thank you, and thank you for the gospel.

@tinachambers4887 2 жыл бұрын

Very informative Tim Hi Christi have a day love from TEXAS.

@mattphillips4260 2 жыл бұрын

think i would take that bent one to local machine shop and have new ram made for it to have a back up on hand for it

@nealtubbs9608 2 жыл бұрын

Very informative.

@petehutzel3778 2 жыл бұрын

Tim, I love that analogy to the disabled list from football teams. I live in serious snow country, with a fleet of three snow removal machines. All are on the disabled reserve list and snow is only a few weeks away! My very liberal finance committee says just buy a new one. Unfortunately, new ones are currently "unobtanium", borrowing a word from behind the Iron Curtain So I am pounding and grinding metal to get something working soon.

@steventhomson2042 2 жыл бұрын

Very interesting!!!!! Great video!!!

@johncoleman8793 2 жыл бұрын

Thanks for the video. When you run the tractor inside the garage how do you exhaust the fumes?

@WCollins041791 2 жыл бұрын

You should try to find a hydraulic repair shop, most will make you a new shaft for pennies compared to buying a new cylinder

@daniele.woodhead1218 2 жыл бұрын

Tim we all live and learn now you won't be apted to do it again next time I've done it on Ford 655 backhoe no fun and less paycheck grandpa wasn't happy about it but I did fix it and paid for all the parts so I can relate 💯 God bless y'all enjoy the video as catch yah on the next one.

@gregnewlin1074 2 жыл бұрын

If you are worried about the extra length of the longer cylinder, you could always remove the gland nut from the cylinder and install a slug (spacer) to limit the extent stroke for your application. See that done a lot in tilt cylinders on forklifts.

@TractorTimewithTim 2 жыл бұрын

Interesting idea.

@russellsmith3825 2 жыл бұрын

Yup basically a washer on the rod between the piston and head /gland

@mikeshuler577 2 жыл бұрын

Tim,you bent th cylinder digging out a stump? Tell me what are the do and do not with my 1025r. YOU and your better half had been a great help with me and Johnny. You better be thankful for her every day 🙏 be safe and have a blessed day 🙏.........

@bluefj-wc3vz 2 жыл бұрын

Meh, stuff happens Tim. I've seen cylinders bent on big excavators, especially in demolition. One thing you have to refrain from for a bucket cylinder is latching onto something like a stump, and then driving the machine to try and pull it out. That puts a boatload of stress on open cylinder. Keep up the great vids.

@TractorTimewithTim 2 жыл бұрын

Definitely didn’t do that this time.

@powrguy1696 2 жыл бұрын

Good that you bought the parts before the current John Deere strike started. On seeing the curl function test, where the bucket slightly bottoms out against the jaws of the thumb, couldn't you just take a grinder to SLIGHTLY remove some material, where the jaw is contacted by the bucket edge, to assure no binding can occur?

@petercampbell4220 10 ай бұрын

Gather is stronger than bucket curl. So with bucket hooked under root or frozen dirt, using gather can bend curl cylinder. BTDT. Bill was big.

@ronhmd 2 жыл бұрын

I bent my 2025R backhoe bucket cylinder also and got it rebuilt by this company for less than $275 including tax in Nov 2021. Good folks. hydraulic industry rich creek va

@terrygroce1594 2 жыл бұрын

Did you have to add hydraulic fluid prior to testing? Very informative video. Great job!

@t.s.tractorworkstrickland5828 2 жыл бұрын

I've been around a lot of equipment for many years. If you bent it without realizing how... that seems kinda weak . Nice video Tim keep up the good work.

@TractorTimewithTim 2 жыл бұрын

Well, I was straining to break a root. I know that much! Running up against the pressure relief.

@BG-vq9fd 2 жыл бұрын

Clamping/curl force may be the same. It depends on the piston diameter. Rod diameter effects cylinder closing force if you assume they have the same piston diameter.

@malcolmcavalier7849 2 жыл бұрын

By noon today , the price of the 270 cylinder will be raised to $1100 , as soon as someone at Deere parts sees this video.

@paulkleinschmit9871 2 жыл бұрын

That is not the first time a KZfaqr has affected the price of stuff. Richard Holder talked about cheap junkyard speed parts for engines and suddenly they weren't so cheap anymore!

@ZILAwelds 2 жыл бұрын

the larger rod will also make the bucket dump faster (as there is less volume to fill with fluid since more steel (larger rod) takes up more volume)

@ZILAwelds 2 жыл бұрын

I guess I commented too early as I am watching ... at 20 min you said that too .... LOL

@TheCritterWindow 2 жыл бұрын

I have a JD 420 loader that had bent then broke cylinders due to being to long from the factory. On a full roll they would bow up a bit. The rod is 25 mm not 1". Them may be the same. JD wanted 600 each. I ordered the material and had the ends machined for inside the ram. I made 4 and have 2 extra. If they will work for you they are yours. Just cut and weld the end on.

@kingsamking3001 2 жыл бұрын

Hi, Big fan of your channel and a 15 year heavy equipment mechanic. Because you went with the larger diameter ram this might not be an issue. Possibly a part of why the old one bent was your bucket cylinder check valve might be set too high. If the check valve was set lower when the pressure was put against it the cylinder would retract instead of bending the ram. With the larger ram you might be fine but it might be a good idea to check the pressures.

@TractorTimewithTim 2 жыл бұрын

Entirely possible!

@kylerayk 2 жыл бұрын

Great video Tim! I have a couple of suggestions though. Please put a cap over the valve on the gas bottle standing by the wall. I had one tip over at work and praise God it was capped because it hit the edge of the welding bench and would have surely broke the valve off and probably killed someone as it would have launched into an office area. Secondly, please wear safety glasses! I've had snap rings, fasteners, drills, taps and every manner of flying object hit my safety glasses when doing repair work over my 30 year career. I don't want to see you with a pirate patch over your eye! Take care!

@jaxturner7288 2 жыл бұрын

Sally? is that you?

@T_Humphries 2 жыл бұрын

Solid advice

@2centsam927 2 жыл бұрын

Kyle's correct. Prolly be a good idea to secure it with a light chain or cable while you're at it. Checking in from earthquake country.

@JohnSmith-tv5ep 2 жыл бұрын

TIM, gotta spend money to make money! But ya do gotta shop around to save money! As yinz know, this world isn't perfect anymore! Good stuff!

@jdfleetguy28 2 жыл бұрын

Great video Tim. Very true, we all break stuff. I have a 260B on my 2025R . I know now what to replace it with if I bend mine. Curious does warranty not cover stuff like that? I was thinking your machine was only a year or so old?

@TractorTimewithTim 2 жыл бұрын

I don’t think warranty would cover. Also, my backhoe is a 2018.

@johniac7078 2 жыл бұрын

You run your equipment hard, like it should be run!!!

@akbychoice 2 жыл бұрын

Supply and demand, possibly the 260 gets replaced more often than the 270 due to the size of the ram.

@jjacres129 2 жыл бұрын

Good reason to get that mini ex Tim

@BigTader 2 жыл бұрын

Knipex makes great tools.

@reno4819 2 жыл бұрын

Like you I do not like to replace a part with the exact same thing. If it broke before, it will brake again. So I will try hard to rebuild it better than before unless what happened was an extraordinary circumstance that are not likely to reoccur.

@Frank-pv1hp 2 жыл бұрын

Hey Tim. I'm curious if your insurance picked up some or all of the tab for you. I love your channel! Keep up the good work

@TractorTimewithTim 2 жыл бұрын

Woulda covered it…but less than the deductible. Insurance companies count the number of claims. I won’t submit a claim for something small.

@davidhill4711 2 жыл бұрын

Tim, it is a shame about John Deere pricing but like you, I enjoy repairing the machine and they are easy. Again typically what I broke. LoL

@andrewdarbyshire9108 2 жыл бұрын

How about this idea, see if the 270 shaft is available and put it in the 260 bore.

@corbin1402 2 жыл бұрын

Hey Tim does the new cylinder have grease fittings? I didn't really see any in the video.

@TractorTimewithTim 2 жыл бұрын

I moved them from the old cylinder after the video. I forgot during the video.

@TheOriginalFreak 2 жыл бұрын

Have you tried gloves with the tips cut off from the factory or cut the tips off of a set of mechanics/fabric shop gloves? I admit they are not the best for certain jobs, but I do find myself wearing them in more situations than full finger gloves, as even just having the tip and the next finger section toward the hand exposed but the rest of my hand and the base of my fingers covered, has saved me a good number of cuts, gouges, and even pinches while still allowing for a great deal of dexterity to manipulate parts and tools as well as being able to retain that very important touch against skin you want or even need for certain jobs (e.g. feeling for a hole to put that pin into blind as it is behind a part that will take 3 hours to remove and another 3 hours to put back in just for a 20 second pin replacement, feeling for a dropped part, etc.)

@martineastburn3679 2 жыл бұрын

The other option is to replace the ram. e.g. rebuild the existing. I think the stronger bar is best. On a root and driving away from it seems to put the angle on it.

@alittleofthisandalittleofthat 2 жыл бұрын

Lots of great info in case I bend mine. Could a machine shop straighten the old one?

@TractorTimewithTim 2 жыл бұрын

Probably, but I don’t think it would ever be as strong, having been bent twice.

@ericpowell335 2 жыл бұрын

Good video. For some reason, these type are more attention holding than trying new implements out. But there's a place for that too.

@TractorTimewithTim 2 жыл бұрын

Interesting feedback. Eric. Thanks!

@ericpowell335 2 жыл бұрын

@@TractorTimewithTim no problem, of course it's just my opinion. Maybe because I don't foresee myself ever having most of those implements but I can definitely see myself breaking something and having to fix it.

@TractorTimewithTim 2 жыл бұрын

All constructive feedback helps. Thanks! There is definitely a backlog of repair work to be done here. I have deferred most of it all summer! I did fix my trailer brakes on the little flatbed dump trailer yesterday without a camera. ...oh well.

@garycorrick 2 жыл бұрын

Thanks for this video. I learned much from you mistake.

@bradolsen8629 2 жыл бұрын

Hey Tim I like your man cave pretty cool

@komitadjie 2 жыл бұрын

I tend to prefer seeing if I can get a rebuild from the local hydraulic shop. Swapping out a ram is likely something that could be done *fairly* easily. Although in this case, you kinda upgraded at the same time, the larger-diameter ram is going to be a lot less likely to stage a repeat performance than the older one, so more of a replacement-upgrade than a straight repair.

@americasdream1265 2 жыл бұрын

wow Tim I have a 741 self leveling front end loader on my 7430 John Deere and I bent one both sides of the cylinders by being stupid but anyway I bought both cylinders from Deere for under $600 but that was before Covid and maybe that is why prices are jumping so much.

@mathdj01 2 жыл бұрын

Having worked in the fluid power industry (pneumatic and hydraulic cylinder designer) I want to share one item. Force = Pressure * Area of piston diameter. Keep in mind outside cylinder diameter is not a value to use because the cylinder wall thickness is unknown. Correct calculation of extend/retract force needs to know the piston diameter. Going to bigger ram (piston rod) only tells you one thing, you got a bigger rod. When looking at outsider cylinder diameter, extend force may or may not be the same when compared to a similar cylinder assembly. And retract force may or may not be the same when compared to a similar cylinder assembly. The comment of retract speed being slower is true based off the lager ram (piston rod) diameter being larger. This works because there maybe less piston diameter area due to larger ram (piston rod). All other comments of force is subject to determination of piston diameter surface area. Designing around cylinder wall thickness is one of many different ways to reduce cost and allow for a overall lower cost and quality, which is may not be know to the consumer.

@5134boris 2 жыл бұрын

@Tractor Time with Tim I have a 3039R with a 275 backhoe I believe. Didn't bend a ram but did have a hydraulic line break completely apart while digging out a 12-16 diameter base sweet gum stump. About a year ish ago, if memory serves me right the lines appeared to be smaller than the 3/8 we replaced them with. Question: ours has a manually articulated thumb, did yours come with or did you have to do modifications to make it a hydraulic thumb, if so, how did you do it?

@TractorTimewithTim 2 жыл бұрын

We have several videos specifically about the hydraulic thumb. Installation, etc. check em out.

@5134boris 2 жыл бұрын

@@TractorTimewithTim Excellent. Thank you.

@fireguy0020 2 жыл бұрын

Hello Tim, I am not trying to tell you what to do... but I noticed a Major Safety Issue, behind you in your shop, it appears that the Gas Cylinder is not secured, if it was to fall over and break the valve off it will go through the wall, instant Cat door, what most people here do is secure them with a piece of chain hooked to the wall, If it is secured, I apologize, i'd just hate to see anything happen, have a Great Day, and keep up the Great Videos

@bishopspyroworld8921 2 жыл бұрын

Ive seen several videos lately of rams being bent. Wonder if JD will put the bigger cylinders on the 1 series.

@zoidsfan77 2 жыл бұрын

Not if it keeps the cash flowing.

@charlieronk7909 2 жыл бұрын

First off Christy your Hair looks great in the video. 2nd how about a upgrade for the 160 loader rams and line pressure upgrade.

@PurpleCollarLife 2 жыл бұрын

Really enjoyed the injured football team this time of year analogy. Nice repair! I think you'll like the 1.25-nch ram. -Chad #purplecollarlife

@benc.7446 2 жыл бұрын

Another great video. I wonder, if the body is the same on both could you just get the 270B Ram and install it in the 260B body?

@zoidsfan77 2 жыл бұрын

You would have to replace the rod-end cap as well.

@benc.7446 2 жыл бұрын

@@zoidsfan77 yes, but still may be cheaper than the entire assembly- assuming that is all that need to change of course. Hope I won’t need to find out😂

@zoidsfan77 2 жыл бұрын

@@benc.7446 Me too, ha! I have a small Kubota backhoe, and videos like this make my wallet fearful.

@timziegler9358 2 жыл бұрын

Tim, can the damaged/bent cylinder be repaired? You are very patient at repairing your tractor! Best wishes.

@brokenarrow2835 Жыл бұрын

I bent both of my curl cylinders on my loader on my Mahindra yesterday,how I have yet figured that out.Looked up the cost of replacements over $3000,so I will probably take them to a hydraulic shop and have them straightened.

@michaelcoffey8008 2 жыл бұрын

It will be faster on the contraction stroke as there less area between the rod and inner barrel due to rod diameter

@photocontrol 2 жыл бұрын

Hopefully with the larger ram, bending won't be an issue anymore.

@joetterolison1286 2 жыл бұрын

Hi Tim Did you watch the video where the guy fixed it with a 2x4 block of wood I would never have believed it works

@TimBinns68 2 жыл бұрын

You probably bent the old one extending the bucket. The interesting thing about going up to the bigger ram is it's stronger but also has less extending force so a double protection against future bending.

@TowWyo 2 жыл бұрын

It will only have less retracting force.

@TimBinns68 2 жыл бұрын

@@TowWyo your retracting cylinder is my bucket extension, same thing....

@charlesbessenbach6252 2 жыл бұрын

It's a little late for this now, but if anything like this ever happens again, it would be a nice opportunity to test "field fixes" to see if you can somehow make the old one function long enough to finish a job. Also, anyone who runs equipment who has never broken anything is either a liar, or hasn't been doing it long enough.

@joetterolison1286 2 жыл бұрын

My BH-75 backhoe bucket curl Ram line somehow moved and found its way under the pivot bolt and sliced into the $106 Hydraulic hose There is no way I can figure out how it got there but it did