I have STEK dynoflex installed on my Model X. Needed two pieces due to the size of windshield. Happy with the installation. As recommended replaced OEM wipers with silicon wipers. Everything is fine until driving into the sun. The wiper scratches after 6-8 months is driving me crazy and has me questioning my rationale for installing. Some days I feel like just biting the bullet and pulling it off. Its supposed to have self healing properties . I am as picky as they come and my car is garage kept and totally covered in ppf. But I can't stop the build up of scratches nor have had much success using heat or hot water to diminish. While I appreciate the film offers some level of protection. I can't just drive on cloudy days.
@TizzleT Жыл бұрын
Did you try heat gun or blow dryer?
@fhamre Жыл бұрын
@@TizzleT Yes to both. And boiling water as well. Its the clear coat on the film that scratches and is not so called self healing.
@aussie8114 Жыл бұрын
That’s a bugger. I would just pull it off and have the natural glass.
@michaelsmith93083 күн бұрын
FYI, if you have a front license plate or vanity plate raise it up in the middle as much as possible (this plate) alone will detour nearly anything coming into the glass, secondly, use a glass glaze or was solution which acts as a barrier to most objects and causes it to repel away without damage. This has worked for me in the last forty years not one scratch-YES:) Now just drive an extra two or three car spaces away when driving over 50 MPH which any unknown road objects should miss your vehicle.
@superman713912 жыл бұрын
Sir you are excellent on explaining a "how to" video!
@TintMasterPete2 жыл бұрын
I’m an Installer for TTM, I was waiting for a video like this to come out thank you. Saw it on Instagram and got curious, then you made the video. Nice!
@WindowTintWarriors2 жыл бұрын
Im glad we could help! Thank you for your support
@Momo_8k2 жыл бұрын
Does this film bead water at all?
@MindShackleFilms2 жыл бұрын
Great video. I've been doing Vinyl applications on Vehicles for almost 20 years, have yet to do any tint or protective applications to windows. (Besides One-way window film.) This video raised my confidence that I could do it pretty easily. Thanks.
@peshmerga842 жыл бұрын
i am officially a self-declared scholar from the university of KZfaq, thank you ;)
@vk73852 жыл бұрын
Man you are the doctor of the films!!!keep up!
@slayz15152 жыл бұрын
Just a tip. If you don't have the tool to pop windshield wipers we just zip tie them pulled out and it works just fine.
@aussie8114 Жыл бұрын
Your ability is amazing. You should be proud of yourself for mastering this task. I’m not convinced on the product itself though, putting PPF on the front windshield. Anyway it’s illegal in my country to put any film on the front windshield so that’s the end of that.
@maladaptedmalarkey Жыл бұрын
Glad I waited until the very end. I was wondering why you didn’t just crank the cabin heat.
@MrWayne__2 жыл бұрын
One of my best selling products
@johngatsby14732 жыл бұрын
What's an average cost for the customer for one of these? Ballpark small SUV
@michaelsmith93083 күн бұрын
@@johngatsby1473 in CA, it would be around $700.00-1,000.
@pappaflammyboi57992 ай бұрын
How am i supposed to scrape ice off my windshield?
@hr1meg2 жыл бұрын
Helluva job! I'm sure you guys could use a shower curtain and make it look good. :) I'm not really sold on this exterior job, and can almost see it peel off in about a month. Maybe I'm wrong. Its probably best in hot climates. Here in the Northeast I dont think it will hold for any extended period. Stil, great install considering the tough material and install conditions.
@RayNLA2 жыл бұрын
Why would it peel off?
@grand04gt2 жыл бұрын
I wonder how it would be with polarized sunglasses. I had PPF on the hood that looked like air pockets and oil slick with my red Oakley polarized sunglasses but other than that i wish i knew about using it on the windshield as it gets really abused. Amazing video!
@WindowTintWarriors2 жыл бұрын
Not a problem at all.
@toddwright6622 жыл бұрын
Teslas are metric which is why your 5/8 socket has some play; it's probably a 15mm.
@illestFlavor2 жыл бұрын
How does this handle conditions where you have to scrape the frost or ice off the windows.
@MosesTV000 Жыл бұрын
Why not use a liquid de-icer, like a decent human being in 2022?
@anacorona2534 Жыл бұрын
@@MosesTV000 you can't always do that when you get up in the morning and the ice is 1/4 inch thick and you have to go to work
@TechCrazy2 жыл бұрын
How does the film hold up when dirt and grime are on it and you turn on the wiper blades? Does it leave scratches and stuff?
@marvindwallacesr3828 Жыл бұрын
Great job on your walk through & the job. I would love to talk to you on learning how to do it & add to my business. But keep up the great work my man.
@jaanusjurisoo54572 жыл бұрын
It is pretty much impossible sale in Florida, since we are NO FAULT STATE. Meaning windshields get replaced free if there is a problem with it. Insurance pays. Good job though.
@isaac1984282 жыл бұрын
I’m curious how this would fair with wiper blades if they start wearing out. How about ice scrappers and automatic car washes? Anyone?
@19Reyn902 жыл бұрын
a steamer would help to lubricate and heat the qrinle problem. it safer than a heat gun. thats how we like to do it at least
@ChrisTintWrap Жыл бұрын
Squeegee method caused those fingers at the corners.. why would u pull tension to the corners ? That’s why u had fingers on all sides vs just the top and/or bottom ..
@dineshmangala5935 Жыл бұрын
Do we need to change wiper from rubber to silicon to keep this film safe ...
@notasushifan Жыл бұрын
Excellent video!
@deannewberry5628 Жыл бұрын
Tell me more about this tint wis
@bkn0x2 жыл бұрын
How can I clean hard water spots off wo destroying the film?
@davidkliu92202 жыл бұрын
Thanks for the vid. What’s the average life on these film? Replacement every 2-3 years? Asking from SoCal area. Thank you
2 жыл бұрын
So why would I want to put what is essentially window tint on the outside? Wipers are going to damage it. First time it snows the ice will rip it all to hell when you turn the wipers on
@etops.flight Жыл бұрын
Is the film not hydrophobic or can you apply a coating to make the surface repel water to mimeses the use of wipers?
@charlescoffey82812 жыл бұрын
how will this not get sratched when a spec of dirt get on the wiper blade.
@jpmackin2 жыл бұрын
I heard that over time- using the wipers causes streaks in the film…?
@podium918 Жыл бұрын
So no shrinking like clear plex from madico .
@shiftdnb2 жыл бұрын
Are you seeing any issues where the windshield wipers are damaging the film?
2 жыл бұрын
Of course they are
@TofuProductionCinema2 жыл бұрын
Exactly this is my main thought and potential concern.
@chrisbraid49082 жыл бұрын
Thanks for another great video! Do you have any videos on how you install side window security/safety film? Thanks for all of your videos!
@davidbalcar12262 жыл бұрын
I am trying to find an installer in New Hampshire or Boston area but not having any luck.
@hc22402 жыл бұрын
Man i job this glass clearplex!
@JJABRAHAM692 жыл бұрын
Glass has a Moh`s scale hardness of 5.5.My concern is what is the hardness or abrasion resistance of the DynoFlex? How does t resist the windshield wipers constant abrasion?
@phetdiamondc88022 жыл бұрын
Hi I need the Dynoflex windshield film for my C8 2022 , where can I buy one . Info please thanks
@desidesiderio6442 жыл бұрын
Great tutorial ... thanks for sharing 👊🏽
@Weathergeekdan2 жыл бұрын
How long does this last with wiper use?
@gapo62angler93 Жыл бұрын
How much is a complete windshield protection install? I also called a Tint shop here in NorCal and he told me they stopped making the windshield protection film , is that true? TIA
@MecaEvolution Жыл бұрын
Hello, please where do you buy it more than 1 meters? I see only 0.5 m large on aliexpress. Thanks
@AaronLitt6752 жыл бұрын
What is the thickness in micron of this film and what is the purpose of it? Also doesn't the wipers scratch the film over time?
@purplemonkeys112 жыл бұрын
I wanted to get this installed at my local tint shop and they said it's for preventing rock chips on your windshield and yes the wipers scratch the film like crazy. Lasts only a few months and you should only install it if you're planning to track your car so the film is more of a one time use. Plus, its really expensive.
@WindowTintWarriors2 жыл бұрын
I have had this film on my Tesla since it came out and it is barely scratched from wipers. Its an excellent material to alleviate pitting and chips in your vehicles windshield
@DekGT5mad2 жыл бұрын
@@purplemonkeys11 obviously you use your wipers when the slightest drop of rain hits-let the screen get wet first. Secondly, you don't wash your car often or keep wiper blades in good condition. I can imagine you driving down the road with the classic windscreen wiper pattern of dirt around the edge of the screen. I've fitted some here in Australia and both cars still look like new after 3yrs-20,000km on one and 15,000km on the other so I'd say it's the way you treated it,not the product.
@purplemonkeys112 жыл бұрын
@@DekGT5mad just passing on what my tint shop told me.
@JackShootsFr2 жыл бұрын
i have noticed you always have a nice polo on and so do your employees. I seen you said you use that OGIO brand is there a particular website that you are ordering them from with your logo? It look super sharp and professional. Also are those collar shirts like a drifit material or are they cotton.
@jjonkie2 жыл бұрын
put on climate in the car so the windshield is warm..
@kravtsovigor6 ай бұрын
Так изначально ты натяжку не дал вот она и не садится как положено,
@krownvikkhris3004 Жыл бұрын
How much would this installation be on a 2006 Crown Victoria
@duonglong29392 жыл бұрын
thank you
@TheFilmTrainer2 жыл бұрын
On fire !!!
@rpmtesla2 жыл бұрын
Great video, do you recommend changing the wiper blades out to silicone ??
@WindowTintWarriors2 жыл бұрын
It is a good idea to make sure you have fresh blades. Silicone are a plus
@onghay2 жыл бұрын
Is it okay to install a tint for the windshield to block IR. the dynoflex has 99% UV but Not sure with IR....
@curtissharris8914Ай бұрын
here cause my rover window just got blasted by a rock and the cost is $2800
@artistjosephtubb2 жыл бұрын
What does this generally cost to have installed say on a Model Y
@jollygreen46622 жыл бұрын
Can u do this for the ford maverick 2022?
@nightsurfer12 жыл бұрын
Do they have ceramic windshield protection?
@superglassrepairrestoratio83272 жыл бұрын
Nice job!
@juanbaeza22512 жыл бұрын
Excelente trabajo! Para que sirve ese film?
@thang17422 жыл бұрын
had a installer do the wind shield and it showed heavy distortion lines across it look as if the material never fully dried even after 3 weeks. Had them remove it due to stressing out my vision when driving.
@DekGT5mad2 жыл бұрын
That's the installers fault, not the film
@thang17422 жыл бұрын
@@DekGT5mad probably but majority of the installs alot of people mention slight distortions due to the windshield so it's not just me
@ildrichaseron2 жыл бұрын
What size is your roll? My WPF guy only has a 40-inch roll so I was wondering if that fully covers top to bottom. He said if it doesn’t, I’m gonna have a line at the bottom of my windshield cause of the 2 separate films 😕
@evanjohnson77142 жыл бұрын
Thoughts on using a tack solution to help flush out and try to stick down those edges/fingers quicker?
@WindowTintWarriors2 жыл бұрын
It could cause distortion. You could use just warm distilled without soap to flush out.
@chartzler94072 жыл бұрын
For ppf film such as this you can use alcohol and water solution to stick it. Makes the glue adhere almost instantly. Been installing ppf for a long time this has been the solution I've used for years
@jakegraham67942 жыл бұрын
Ya the distilled water makes those stubborn fingers stick nicely. I like to do a rough trim fist before squeezing, that way there’s no tension by the edges then final trim after. I put more slip to give me more time to do my first trim.
@jakegraham67942 жыл бұрын
Oh and Sean, this has to be one of the best smelling films on the market! 🍒🤣lol
@davivi19642 жыл бұрын
Thanks so much for the video👍 what's the warranty on the product/ scratches
@bourbonbill2 жыл бұрын
Can you still scrape ice off with this film on?
@andrewwickes10912 жыл бұрын
Is that film able to shrink via heat gun like with tint?
@johngatsby14732 жыл бұрын
Ya kinda gotta get windshield protection film.....I had a Kia Niro 2017...window broke..700.00 and now my daughter's 2011 Honda CrZ....700 dollars. Wtf is going on.
@tamarreid68022 жыл бұрын
Tint goat
@blaino12 жыл бұрын
What about using a ice scrapper on it in the winter time?
@WindowTintWarriors2 жыл бұрын
That would damage it but ice is less likely to stick to the STEK
@keithh30992 жыл бұрын
Yeah I did not do paint protection on my windshield because if it gets a crack or a chip the window cost less than the paint protection. So what’s the purpose?
@alexavang772 жыл бұрын
Model 3 front windshield is ~$1300 to replace.
@keithh30992 жыл бұрын
@@alexavang77 Dang! Who can afford that, maybe it is cheaper to to the paint protection.
@Rubenplat2 жыл бұрын
wish i did this on my tesla. I just cracked my glass the other day
@sleepy_ipl2 жыл бұрын
It would have still cracked even with this film on it.
@Fifth_Entertainment Жыл бұрын
It make no sense to install it on the outside where it can easily damage by wiper and scrapper
@WindowTintWarriors Жыл бұрын
Well. It would make even less sense to install it on the inside seeing that it is “Windshield Protection Film”
@hugochato552 жыл бұрын
What if the windshield has some chips? Do you fill them with resin or just install film over them?
@LiquidPlacidity2 жыл бұрын
film over
@lukelawrence6007 Жыл бұрын
At least its cheaper then a windscreen
@billnipp23092 жыл бұрын
Is this a DIY project for the regular schmoe?
@WindowTintWarriors2 жыл бұрын
No it is not. To be installed by a trained professional
@mr2dsp2 жыл бұрын
Are you guys located in NY ? i need to do that in my plaid this spring time
@WindowTintWarriors2 жыл бұрын
Yes. Search us on google. ShineTek Auto Spa
@mr2dsp2 жыл бұрын
@@WindowTintWarriors How much to do the windshield Stek
@brianpreston30522 жыл бұрын
Is this product really worth it. I have a 2014 mustang gt. Turning it into a show car. My car will have ceramic coating.
@johnwilliam83662 жыл бұрын
Yes! I had STEK placed on the windshield immediately on delivery of my 2022 BMW G82 M4 Comp in Los Angeles. I also added Xpel/PPF on the body of the car
@MrWayne__2 жыл бұрын
I sell STEK Film. When i quote the job i research what a replacement costs first. So say a car windshield replacement is $450 im not going to recommend a $750 film. Majority newer cars yes 100% as that’s a few thousand Bc they need calibration so $750 film is most definitely worth having.
@homelessmillionaire12 жыл бұрын
Where are you located?
@Wisethewisest2 жыл бұрын
Are they submitting their lead through tint wiz? Or are they coming through your website, etc? Thanks for the content
@patrickcain58832 жыл бұрын
What brand are your shirts?
@showroomsolutionsplusllc12532 жыл бұрын
OGIO
@skrapenpennies99472 жыл бұрын
People sure do waste money
@ronaldsteiger75622 жыл бұрын
Do u have a location on Long Island Where and name and tel number
@WindowTintWarriors2 жыл бұрын
Hello, Yes. - ShineTek Auto Spa, Medford NY
@Secret4us3 ай бұрын
I see Tesla at least copied Toyota on windshield stuff.
@beely78482 жыл бұрын
It's all good til an police pulls u over n gives u an fine. Dude, in what state do they allow u to have tint on ur front windshield??? Not DOT approved. Some states don't even allow u to ting driver n front windows. Good luck on that fine
@WindowTintWarriors2 жыл бұрын
This is a clear windshield protection film that goes on the outside, not window tint 🤦🏽♂️
@MrPcphn12 жыл бұрын
You got make way too much money with less work than a regular mechanic.