Wine Mold Holder

Рет қаралды 11,995

3 жыл бұрын

Hey everybody,
The following video will show you how to create a wine caddy using the wine bottle/glasses mold.
Items you will need to complete this project include:
-Epoxy
-wine mold and coasters (purchased from Amazon)
-Mica powders and silver leaf was used for this project (purchased from Amazon)
-gloves
-popsicle sticks
-cups for mixing
-baby wipes
-patience :)
Thank you for watching. I hope you enjoyed it :)

Пікірлер: 37

@maribelvargas4244 2 жыл бұрын

thanks for sharing and pointers at the end helps alot and beautiful work

@christinekramer5426 3 ай бұрын

Great video. I’ve been having the same problems with the one side not fitting! Good advice

@jamiek.7149 5 ай бұрын

Beautiful work!! I'm a new subscriber. Just started working with resin. Thank you for your tips!

@ItsACraftThingAlishaVirgillo 3 жыл бұрын

Great idea with the clips to hold it open! Thank you so much for that.

@jaxi2206 2 жыл бұрын

Your really funny! I just started resin and my gloves got covered in them silver flakes lol. My first wine caddy didn't cure properly and was bendy so I'm going to retry after watching this. Yours is beautiful.

@mltbkr 3 жыл бұрын

I have this wine mold...thank you for the tip this will help a lot. Your set came out so pretty!!! love the silver and the sky blue mica. I'm inspired by your video to give this a try. thank you!!!!

@gailyko 2 жыл бұрын

Absolutely love this set! Thank you for sharing.. 👌🏾

@dennisclark8766 2 жыл бұрын

Beautiful!

@tamarasummers3237 3 жыл бұрын

Oh I am soooo thankful I came across your video, I bought the same exact molds, and it is also mis-shaped. Your idea was perfect to fix while it is curing. I Loved your video, I really learned alot. Will continue to follow you! I am new to resin art.

@CraftingMadeEasy 3 жыл бұрын

Thank you for subscribing 🥰

@joycewhitworth4252 3 жыл бұрын

I found that the sponge paint brushes from Dollar Tree works relly well for that

@CraftingMadeEasy 3 жыл бұрын

Thank you I will try it.

@brookeeggleston8046 3 жыл бұрын

Can you explain better? Thanks

@EACHONETEACHONE09 3 жыл бұрын

Beautiful work! Did it take a long time for the resin to cure before you could put the glasses on?

@CraftingMadeEasy 3 жыл бұрын

Thank you. No, I put the wine glasses about 24 hours later. But I did notice it was bending a little bit, so I would recommend waiting at least 72 hours.

@amberasif5615 3 жыл бұрын

@@CraftingMadeEasy mine is still bending its been several weeks and I kept a heater on while it was curing. What should I do

@CraftingMadeEasy 3 жыл бұрын

@@amberasif5615 sounds like your epoxy wasn't mixed right. 🥺

@hopecolbert9550 3 жыл бұрын

Hi. Thank you for the tutorial. What type of resin do you use for your molds?

@CraftingMadeEasy 3 жыл бұрын

I think for this one I used faux drizzle.

@joycewhitworth4252 3 жыл бұрын

You can use scissors to scrape the mold to fit the glass

@jennasimone6961 3 жыл бұрын

I have this set too and love it! I just started using it and my problem is that it bends after the glasses have been sitting on it a while :/ any tips?

@talesathomas2730 2 жыл бұрын

I have had that problem as well…I have tried everything but still have this issue.

@anitasahgal3966 3 жыл бұрын

How long does the wine caddy take to cure?

@rockietrades7791 3 жыл бұрын

Question...If I remove the glass holder from the mold before the 24hrs and sit to side will it continue to cure?

@CraftingMadeEasy 3 жыл бұрын

Yes.

@summerlovesonny3339 Жыл бұрын

I made one but glasses clank on bottle:(

@stevegibson2543 3 жыл бұрын

Can you please tell me what epoxy you are using only the one I use tends to bend when glasses on it

@CraftingMadeEasy 3 жыл бұрын

I think for this one I used amazing clearclast. Try letting it set for 72 hours

@mltbkr 3 жыл бұрын

Me again...exactly what mica brand did you purchase/used?

@CraftingMadeEasy 3 жыл бұрын

Hey, I purchased from Amazon. Here is the link amzn.to/2UybMo4

@sabrenabrown7164 2 жыл бұрын

What was your measurements for the reason or are you using straight epoxy

@CraftingMadeEasy 2 жыл бұрын

I am using straight epoxy.

@vickielamoreaux4510 Жыл бұрын

i watched another video and the lady added 3 popsickle sticks in there

@TheCraftingNook 3 жыл бұрын

You mentioned some great key points at the end about the sides not being the same and you are right...I was trying to figure out why was it such a struggle. Thanks a bunch. If you get a chance check my channel out because I'm a newbie to making videos. I would absolutely love for you to critique rather it's good or bad. Only if you have the time. Keep up the great videos 💕

@CraftingMadeEasy 3 жыл бұрын

You're welcome. Headed to your channel to subscribe :)

@TheCraftingNook 3 жыл бұрын

@@CraftingMadeEasy thank you so much I really appreciate you.💕

@gwenluckey3125 2 жыл бұрын

Really wish you had everything on camera your set up to see kinda was crazy & you need to the volume way better.... if you were by a window then you shouldn't had to have a stupid mask on 🤔🤔🤔🤔🤔